Densities of internally mixed organic-inorganic particles from mobility diameter measurements of aerodynamically classified aerosols
Not Available
54 ENVIRONMENTAL SCIENCES↗
SEARCH · Search NASA
Results for “mobility diameter”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Hygroscopic growth of UO 2 F 2 nanoparticles
Hygroscopicity is an important physicochemical property of aerosol that describes the ability of a particle to uptake water. The hygroscopic properties of uranyl fluoride (UO 2 F 2 ) aerosol generated from a UF 6 hydrolysis reactor was investigated for the first time using a custom-built Humidified Tandem Differential Mobility Analyzer (HTDMA). The HTDMA is capable of measuring UO 2 F 2 nanoparticle growth determined by mobility size over a wide range of atmospheric humidity from dry conditions at <10% relative humidity (RH) to 85% RH. The hygroscopic properties were determined for nanoparticles as small as 3.5 nm in this study. Although the largest size of UO 2 F 2 nanoparticles was 80 nm, monodisperse aerosol with a mobility diameter of up to approximately 500 nm can be investigated using the HTDMA. Anhydrous UO 2 F 2 nanoparticles with a mobility diameter of 3.5 nm were shown to be highly hygroscopic with a deliquescence relative humidity (DRH) of 10%. Hydrates with a larger mobility diameter from 10 to 80 nm were non-hygroscopic with no observable DRH and limited water uptake up to 85% RH. Here, these results demonstrate the hygroscopic properties of UO 2 F 2 nanoparticles are highly variable and based on both the mobility size and hydration state. Hygroscopicity affects the physicochemical properties of UO 2 F 2 nanoparticles, including the aerosol phase state and viscosity, with impacts on aerosol growth, coagulation, and deposition that is critical for understanding the fate and transport of UO 2 F 2 nanoparticles in the atmosphere.
Hygroscopicity↗
Optimal Iteration and its Application to Some Problems in Aerosol Science and Particle Dynamics
Iteration is a common technique for finding the solutions to an equation. It is easy to code, straightforward to apply, readily comprehensible, and can be run indefinitely until a given accuracy is attained. However, for a given equation there are multiple iteration schemes that can be employed, with different convergence rates, and there is no obvious way to determine a priori which is best. In this work, the convergence rates of different approaches to simple iteration schemes are analyzed and the new technique of optimal iteration, which determines the scheme that maximizes the convergence rate, is introduced and illustrated by its application to several common problems in aerosol and particle dynamics. The first application is determination of the mobility diameter of an aerosol particle from the measured mobility, which is complicated by the nonlinearity of the Cunningham correction. This same equation occurs in the determination of the diameter of multiply-charged particles with the same mobility diameter as singly-charged particles. The next application is determination of the aerodynamic diameter from the mobility diameter for situations in which the Cunningham correction must be taken into account. The final two applications are determination of the terminal velocity from the diameter, and of the diameter from the terminal velocity, for particles sufficiently large that Stokes’ Law does not apply. The technique is easy to apply and can be employed in a number of situations.
54 ENVIRONMENTAL SCIENCES↗
Hygroscopic Growth of UO 2 F 2 Particles
Hygroscopicity is an important physicochemical property of aerosol that describes the ability of a particle to uptake water. The hygroscopic properties of uranyl fluoride (UO 2 F 2 ) aerosol generated from a UF 6 hydrolysis reactor was investigated for the first time using a custom-built Humidified Tandem Differential Mobility Analyzer (HTDMA). The HTDMA is capable of measuring UO 2 F 2 particle growth determined by mobility size over a wide range of atmospheric humidity from dry conditions at <10% relative humidity (RH) to 85% RH. The hygroscopic properties were determined for nanoparticles as small as 3.5 nm in this study. Anhydrous UO 2 F 2 particles with a mobility diameter of 3.5 nm were shown to be highly hygroscopic with a deliquescence relative humidity (DRH) of 10%. Hydrates with a larger mobility diameter of 10 to 80 nm were non-hygroscopic with no observable DRH and limited water uptake up to 85% RH. These results demonstrate the hygroscopic properties of UO 2 F 2 particles are highly variable and based on both the mobility size and hydration state. Hygroscopicity affects the physicochemical properties of UO 2 F 2 particles, including the aerosol phase state and viscosity, with impacts on aerosol growth, coagulation, and deposition that is critical for understanding the fate and transport of UO 2 F 2 particles in the atmosphere.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Multiple-charging effects on the CCN activity and hygroscopicity of surrogate black carbon particles
Accurate measurements of cloud condensation nuclei (CCN) activity and hygroscopicity of black carbon (BC)-containing particles are particularly important because of the positive climate forcing from these particles. Such measurements are typically conducted on particles selected by a Differential Mobility Analyzer (DMA), which in addition to singly charged particles transmits multiply charged larger particles that have the same electrical mobility. These larger particles activate at lower supersaturations than the singly charged particles, biasing measurements and resulting in overestimation of CCN activity and hygroscopicity parameter (κ). Here, we measure the CCN activity and determine κ for different BC surrogates with electrical mobility diameters from 100 to 200 nm selected 1) only by electrical mobility with a DMA, and 2) by both electrical mobility and mass using a DMA and a Centrifugal Particle Mass Analyzer (CPMA), thus allowing selection of only singly charged particles. We demonstrate the use of the DMA-CPMA system in resolving biases caused by multiply charged particles, and we show that the effect of multiple charging on the CCN activity of the BC particles is strongly influenced by morphology dispersion, i.e., the variability due to the range of morphologies of particles that have the same electrical mobility and mass. Finally, our findings show that electrical mobility-based methods alone are unlikely to lead to accurate results in measurements of CCN activation and hygroscopicity of BC particles, even for those with a more compact morphology.
54 ENVIRONMENTAL SCIENCES↗
Online ion mobility spectrometry of nanoparticle formation by non-thermal plasma conversion of metal salts in liquid aerosol droplets
The synthesis of nanoparticles by reaction of liquid aerosol droplets containing precursors in a flow-through, atmospheric-pressure, non-thermal plasma offers a continuous, scalable, substrate- and stabilizer-free approach for direct deposition into liquids or onto soft substrates. However, the combination of multiphase and non-equilibrium chemistry makes the process complicated and poorly understood. Here, we present ion mobility spectrometry measurements of liquid water droplets containing silver nitrate passing through an atmospheric-pressure dielectric barrier discharge reactor that allows us to monitor silver nanoparticle formation online for the first time. Mobility diameter distributions were obtained with the plasma on and off, and exhibited a shift, which was related to the degree of conversion of silver nitrate. The silver nanoparticles were also collected and characterized by UV–visible absorbance spectroscopy and transmission electron microscopy to support the online measurements. Importantly, negligible conversion was found when the water was removed by a diffusion dryer, suggesting that the key reducing species are in the liquid phase, such as solvated electrons. Finally, the study demonstrates how ion mobility spectrometry measurements can be applied to provide insight into this approach to nanoparticle synthesis.
42 ENGINEERING↗
NCSU HTDMA data
NCSU HTDMA data Data Level b1: QC checks applied to measurements Data Format: CSV Description: See "instrument description Site: Houston, TX; Tracking Aerosol Convection interactions ExpeRiment (HOU) Location: Houston, TX; AMF1 (main site for TRACER) Facility Code: M1 Category: Aerosol Properties Data Type: PI Data Source Instrument/Data: Humidified Tandem Differential Mobility Analyzer; 2 Differential Mobility Analyzers (DMA1 and DMA2). Start Date: 2022-06-01 End Date: 2022-09-26 Contact PI: Markus Petters (mdpetter@ncsu.edu) Funding Source: DOE ASR award US Department of Energy, Office of Science, Biological and Environment Research (grant no. DE-SC 0021074) Instrument description The NCSU HTDMA was operated at a sheath-to-sample flow ratio of 5:1 L min−1. The HTDMA was configured to measure hygroscopic growth factors of dry particles with mobility diameters of D = 15, 20, 30, 40, and 50 nm at RH ~ 70%. A complete cycle for all diameters took ~30 minutes. A sample line brought aerosol inside the trailer at 2.5 L min-1, where it was distributed between NCSU RDMA (1.5 L min-1) and NCSU HTDMA (1 L min-1) lines. The sample line was dried with three silica-gel driers in series, and then neutralized with X-ray neutralizer. The sample line entered DMA1 (operated as an electrostatic classifier). Monodisperse particles with certain fractions were humidified with temperature controlled Nafion membrane immersed in water before entering DMA2 (operated in scanning mobility particle sizer). Please contact mdpetter@ncsu.edu for further information.
54 ENVIRONMENTAL SCIENCES↗
Evaluation of methods for characterizing the fine particulate matter emissions from aircraft and other diffusion flame combustion aerosol sources
The U. S. Environmental Protection Agency in collaboration with the U. S. Air Force Arnold Engineering Development Complex conducted the VAriable Response In Aircraft nvPM Testing (VARIAnT) 3 and 4 test campaigns to compare nvPM emissions measurements from a variety of diffusion flame combustion aerosol sources (DFCASs), including a Cummins diesel engine, a diesel powered generator, two gas turbine start carts, a J85-GE-5 turbojet engine burning multiple fuels, and a Mini-CAST soot generator. The VARIAnT research program has conducted four test campaigns to date with the VARIAnT 3 and 4 test campaigns focusing on BC mass instrument performance, use of gas turbine engine sources for BC mass instrument calibration, and the characterization of the aerosols produced from the combustion sources. Results from both campaigns revealed agreement of about 20% between the AVL Micro-Soot Sensor, the Cavity Attenuated Phase Shift (CAPS PMSSA) monitor and the thermal-optical reference method for elemental carbon (EC), independent of the calibration source used. For the Artium LII-300, the measured mass concentrations in VARIAnT3 fall within 18% and in VARIAnT4 fall within 32% of the reference EC mass concentration when calibrated on a combustor rig in VARIAnT3 and on a LGT-60 start cart in VARIAnT4, respectively. It was also found that the three mass instrument types (MSS, CAPS PMSSA, and LII-300) can exhibit different BC to reference EC ratios depending on the emission source that appear to correlate to particle geometric mean mobility diameter, morphology, or some other parameter associated with particle geometric mean diameter (GMD) with the LII-300 showing a slightly stronger apparent trend with GMD. Systematic differences in LII-300 measured mass concentrations have been reduced by calibrating with a turbine combustion source (combustor or turbine engine). With respect to the particle size measurements made, the sizing instruments (TSI SMPS, TSI EEPS, and Cambustion DMS 500) were found to be in general agreement in terms of size distributions and concentrations with some exceptions. Teflon filter measurements of the total aerosol mass produced by the various DFCASs differed from the reference EC, BC, and integrated particle sized distribution measured aerosol masses. The Teflon filter measured mass was 30 to 40% greater than the reference EC and 50 to 60% greater than the BC mass for the J85 in both test campaigns. The measurements of particle size distributions and single particle analysis by miniSPLAT indicated the presence of large particles (>100 nm) having more compact morphologies, higher effective density, and a composition dominated by OC and ash. This increased large particle fraction is also associated with higher values of single scattering albedo measured by the CAPS PMSSA instrument and higher OC/EC measurements. These measurements indicate gas turbine engine emissions can be a more heterogeneous mix of particle types beyond the original E31 assumption that it is mainly composed of black carbon.
33 ADVANCED PROPULSION SYSTEMS↗
Estimation of Possible Primary Biological Particle Emissions and Rupture Events at the Southern Great Plains ARM Site
We use 10 years of data from the Department of Energy (DoE) Atmospheric Radiation Measurements (ARM) United States Southern Great Plains (SGP) site with nearby regional pollen and fungal spore measurements to indirectly estimate the seasonal influence of these two primary biological aerosol particles (PBAP). We estimate possible primary emissions of larger PBAP and PBAP rupture events, which form submicron organic aerosol during precipitation or high relative humidity. High pollen counts at two urban stations near SGP occur during late winter/early spring (day of year (DOY) 50–120) and late summer (DOY 240–310). Around 4–19 days per year show possible pollen events (PPE) when near-surface lidar observations of daily linear particle depolarization ratio >0.1 are coincident with high organic aerosol fraction. For PPE days with rainfall, aerosol size distribution observations show enhanced submicron particle concentrations consistent with pollen rupture events. For fungal spores, high fungal spore counts occur during late spring/early summer (DOY 110–195) and late summer/autumn (DOY 220–340). Based on size distribution observations, up to 7% of days have possible fungal spore rupture events (PFE) with higher aerosol number count specifically over the range expected for fungal spore fragment mobility diameter (20–50 nm). These short-lived PFE correlate with rainfall or occur after prolonged exposure to rainfall (e.g., >10 h). While the SGP site lacks direct measurements of bioaerosol and large particle sizes, this analysis suggests that PBAP primary emissions and rupture events could occur about 32 days per year, representing an important component of the aerosol budget during seasonal emissions.
54 ENVIRONMENTAL SCIENCES↗
Resonance-stabilized radical clustering bridges the gap between gaseous precursors and soot in the inception stage
Carbonaceous particles are widespread in combustion, atmospheric, extraterrestrial, and nanomaterials environments. Resonance-stabilized radicals (RSRs) are commonly identified in fuel combustion and pyrolysis processes and play an essential role in carbonaceous particle formation. Despite their importance, comprehensive experimental and mechanistic understanding of particle inception through RSR reactions is lacking. This work investigated particle size distribution, chemical composition, and thermal behavior of soot particles generated by the flow reactor pyrolysis reactions of typical RSRs, in particular, 1-indenyl, 1-methylnaphthyl, and 2-methylnaphthyl radicals, and by the pyrolysis of hydrocarbons with a variety of structures. Particle size distributions show soot particles with mobility diameters in an incipient-particle range of 1.3 to 1.6 nm. Laser desorption/ionization mass spectrometry results suggest that soot products consist of much larger covalently bound clusters (CBCs) than those observed in the gas phase. Under our experimental conditions, the CBCs exhibit a phase transition for particles with calculated molecular diameters of around 1.5 nm. Evaporation experiments and thermogravimetric analysis of the soot products reveal distinct thermal characteristics for small and large CBCs. These results implicate CBCs as bridges between gas-phase species and soot particles. The present work provides a soot-inception mechanism called RSR clustering (RSRC) that is characterized by the reactive clustering of RSRs. The RSRC mechanism contrasts with conventional soot formation models that attribute soot inception primarily to the aggregation of large-size polycyclic aromatic hydrocarbons.
carbonaceous particle↗
High temperature and pressure regime soot: Physical, optical and chemical signatures from high explosive detonations
Submicron particles are formed during the detonation and deflagration of carbon-rich energetic materials known as high explosives (HE) that can be lofted and transported long distances in the atmosphere. Particles include refractory species like soot, a.k.a. black carbon (BC), and have impacts to climate and human health at local, regional, and global scales. Here, we contrast detonation soot aerosol physical, optical and chemical properties that are formed more efficiently in terms of emission factors and ratios with traditional combustion sources from biomass burning and fossil fuels. We utilize ambient aerosol techniques for the first time to identify soot from two well-known HE's (1) Comp B-3: 40% trinitrotoluene (TNT) and 60% 1,3,5-trinitro-1,3,5-triazinane (RDX) and (2) PBX 9501: 95% 1,3,5,7-tetranitro-1,3,5,7-tetrazoctane (HMX) with 2.5% Estane and a 2.5% mixture of bis(2,2-dinitropropyl)-acetal (BDNPA) and bis(2,2-dinitropropyl)-formal (BDNPF). Size distributions, optical and chemical properties are presented. Aggregate soot had small mobility diameters (<100 nm) and unique optical and chemical signatures depending on the explosive composite composition, detonation atmosphere (e.g., air, argon) and pressure. Single-scattering albedos (SSA) from 0.3 to 0.8 and absorption Angstrom exponents (AAE) from 0.5 to 2.0 measured across 405–870 nm wavelengths depended on the explosive composite composition and detonation conditions. Comp B-3 detonation soot was similar to other combustion soot sources, whereas PBX 9501 soot had high scattering relative to absorption. Carbonaceous chemical signatures included the presence of fullerenes that were distinct from ambient and laboratory-generated soot surrogates and the detection of trace metals, including aluminum, copper, iron, and zinc.
36 MATERIALS SCIENCE↗
Atmospheric fungal nanoparticle bursts
Aerosol nanoparticles play an important role in the climate system by affecting cloud formation and properties, as well as in human health because of their deep reach into lungs and the circulatory system. Determining nanoparticle sources and composition is a major challenge in assessing their impacts in these areas. The sudden appearance of large numbers of atmospheric nanoparticles is commonly attributed to secondary formation from gas-phase precursors, but in many cases, the evidence for this is equivocal. We report the detection of a mode of fungal fragments with a mobility diameter of roughly 30 nm released in episodic bursts in ambient air over an agricultural area in northern Oklahoma. These events reached concentrations orders of magnitude higher than other reports of biological particles and show similarities to unclarified events reported previously in the Amazon. These particles potentially represent a large source of both cloud-forming ice nuclei and respirable allergens in a variety of ecosystems.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
TRACER Carbonaceous Aerosols Thrust – University of California, Davis Field Campaign Report
The broader U.S. Department of Energy Atmospheric Radiation Measurement (ARM) user facility’s TRacking Aerosol Convection interactions ExpeRiment (TRACER) campaign aims to increase our understanding of convective cloud life cycles and aerosol-convection interactions. Our TRACER Carbonaceous Aerosols Thrust-University of California, Davis (TRACER-CAT-UCDavis) study complemented these broader aims by characterizing and quantifying the optical properties and composition of carbonaceous aerosols during part of the TRACER intensive sampling period (July 1- July 31, 2022) at the first ARM Mobile Facility (AMF1) main site (M1) in La Porte, Texas. Our measurements complemented the suite of instrumentation already provided by the AMF1, expanding the capabilities through deployment of unique, state-of-the-science instrumentation. The instrumentation included: (i) two cavity-attenuated phase shift spectroscopy single-scatter albedo (CAPS-SSA) instruments operating at 530 nm and 630 nm, and that were modified to characterize particle light absorption, extinction, and scattering at elevated humidities; (ii) the UC Davis dual-wavelength cavity ringdown-photoacoustic spectrometer (CRD-PAS), which characterizes dry particle extinction and absorption at 405 nm and 532 nm; (iii) a soot particle aerosol mass spectrometer (SP-AMS) that operated in “laser only” mode that characterized the size-dependent compositions of black carbon (BC)-containing particles; (v) a thermal denuder, to remove coatings on particles; and (vi) a scanning electrical mobility sizer (SEMS), to characterize particle mobility diameters from 10-1300 nm. Our measurements occurred alongside complementary observations made by Los Alamos National Laboratory (LANL) during the TRACER-CAT-LANL study, including a humidified CAPS-SSA instrument operating at 450 nm. Our primary scientific interest is in understanding the relationship between particle composition and light absorption, with a particular focus on the influence of water uptake. While it is known that coatings on BC can enhance absorption, the extent to which this occurs in the atmosphere and the specific role that water plays as a coating remain unclear. The TRACER-CAT-UCDavis measurements were made with near-complete coverage for the CRD-PAS, SP-AMS, and SEMS throughout the intensive period. The UC Davis humidified CAPS-SSA instruments had significant challenges with operation owing to the demanding conditions (large temperature fluctuations, high humidity), exacerbated by supply chain issues that delayed resolution of these challenges. However, the humidified CAPS-SSA instrument operated by LANL operated throughout the intensive period with near-complete coverage. The dry light extinction measurements from the CRD-PAS measurements and the LANL CAPS-SSA exhibited a good correlation, although the CAPS-SSA systematically measured greater extinction values than expected. While all instruments, with the exception of an aerodynamic particle sizer (APS), measured behind a common particulate matter (PM)2.5 μm cyclone, the greater extinction measured by the LANL CAPS-SSA compared to the CRD-PAS may have resulted from different losses of larger particles in the sampling lines from the cyclone to the instruments; the tubing length was shorter from the cyclone to the LANL CAPS-SSA, consistent with this idea. A summary of the TRACER-CAT-UCDavis measurements, along with some of the TRACER-CAT-LANL measurements, are shown in the figure below. Notably, there were periods when the contributions of presumed dust were substantial and even dominated the observed light extinction and absorption. Also, there was a clear shift in the behavior of submicron particles from before July 16, 2022 to after, with the prior period exhibiting regular episodes of new particle formation and the latter period exhibiting rapid variations in the concentrations of small particles.
54 ENVIRONMENTAL SCIENCES↗
Soot Superaggregates from Flaming Wildfires and Their Direct Radiative Forcing
Wildfires contribute significantly to global soot emissions, yet their aerosol formation mechanisms and resulting particle properties are poorly understood and parameterized in climate models. The conventional view holds that soot is formed via the cluster-dilute aggregation mechanism in wildfires and emitted as aggregates with fractal dimension D(sub f) approximately equals 1.8 mobility diameter D(sub m) (is) less than or equal to 1 micron, and aerodynamic diameter D(sub a) (is) less than or equal to 300 nm. Here we report the ubiquitous presence of soot superaggregates (SAs) in the outflow from a major wildfire in India. SAs are porous, low-density aggregates of cluster-dilute aggregates with characteristic D(sub f) approximately equals 2.6,D(sub m) (is) greater than 1 micron, and D(sub a) is less than or equal to 300 nm that form via the cluster-dense aggregation mechanism.We present additional observations of soot SAs in wildfire smoke-laden air masses over Northern California, New Mexico, and Mexico City. We estimate that SAs contribute, per unit optical depth, up to 35% less atmospheric warming than freshly-emitted (D(sub f) approximately equals 1.8) aggregates, and approximately equals 90% more warming than the volume-equivalent spherical soot particles simulated in climate models.
SAS↗
Preliminary results on 400 fps impact tests of two 2-ft diameter containment models for mobile nuclear reactors
Impact tests of two 2-foot diameter containment models for mobile nuclear reactors
Dallas, T.↗
JPL antenna technology development
Plans for evaluating, designing, fabricating, transporting and deploying cost effective and STS compatible offset wrap rib antennas up to 300 meters in diameter for mobile communications, Earth resources observation, and for the orbiting VLBI are reviewed. The JPL surface measurement system, intended for large mesh deployable antenna applications will be demonstrated and validated as part of the antenna ground based demonstration program. Results of the offset wrap rib deployable antenna technology development will include: (1) high confidence structural designs for antennas up to 100 meters in diameter; (2) high confidence estimates of functional performance and fabrication cost for a wide range of antenna sizes (up to 300 meters in diameter); (3) risk assessment for fabricating the large size antennas; and (4) 55 meter diameter flight quality hardware that can be cost effectively completed toto accommodate a flight experiment and/or application.
Freeland, R. E.↗
TRACER-CAT-UCDAVIS Aerosol Optical Properties and Sizing - smps
Aerosol size distribution and optical properties collected in La Port TX, during TRACER-CAT-UCDavis, July 2022. Speciated particle composition measurements are reported separately. All sampling was conducted with an identical aerosol inlet as the standard ARM-AOS systems. The TRacking Aerosol Convection interactions ExpeRiment Carbonaceous Aerosols Thrust by UC Davis (TRACER-CAT-UCDavis, July 2022) was designed to complement the larger ARM TRACER science goals to understand convective cloud lifecycles and aerosol-convection interactions. TRACER-CAT-UCDavis is focused on understanding the relationship between particle composition and light absorption and the influence of water uptake on this relationship. This aerosol data can be used to understand the relationship between particle composition and light absorption and the influence of water uptake on this relationship. Instruments include: UC Davis two-wavelength cavity ringdown-photoacoustic spectrometer (CRD-PAS); Brechtel scanning electrical mobility sizer (SEMS); modified humidified cavity attenuated phase shift spectrometer with single scatter albedo (H-CAPS-SSA)
54 ENVIRONMENTAL SCIENCES↗