Search NASA⌕ Search

SEARCH · Search NASA

Results for “mode choice study design”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Developing a small participant framework: An investigation of mode choice influential factors

An in-depth comprehension of the changing impact of mode choice influencing factors is essential in planning for behavior-adaptive mode shift policies. This study developed a framework to investigate a method of evaluation of the changes in mode choice using a small participation pool. A field application in Pima County, Arizona was developed to test the developed framework to evaluate the impact of a real transit experience. Twenty-two participants were recruited and repeated measurements were taken before and after their transit trip. The results revealed that people are less susceptible to their mental biases after a transit trip and consider more objective elements such as walking time. The developed framework resulted in successful evaluation methods that are reproducible for other application study designs. Thus, the results further present that low participant recruitment in application-based field studies can be accomplished using this developed methodology, for other regions and studies.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2023

Factors influencing mode choice of adults with travel-limiting disability

Introduction: Despite the plethora of research devoted to analyzing the impact of disability on travel behavior, not enough studies have investigated the varying impact of social and environmental factors on the mode choice of people with disabilities that restrict their ability to use transportation modes efficiently. This research gap can be addressed by investigating the factors influencing the mode choice behavior of people with travel-limiting disabilities, which can inform the development of accessible and sustainable transportation systems. Additionally, such studies can provide insights into the social and economic barriers faced by this population group, which can help policymakers to promote social inclusion and equity. Method: This study utilized a Random Parameters Logit model to identify the individual, trip, and environmental factors that influence mode selection among people with travel-limiting disabilities. Here, using the 2017 National Household Travel Survey data for New York State, which included information on respondents with travel-limiting disabilities, the analysis focused on a sample of 8,016 people. In addition, climate data from the National Oceanic and Atmospheric Administration were integrated as additional explanatory variables in the modeling process. Results: The results revealed that people with disabilities may be inclined to travel longer distances walking in the absence of suitable accommodation facilities for other transportation modes. Furthermore, people were less inclined to walk during summer and winter, indicating a need to consider weather conditions as a significant determinant of mode choice. Moreover, low-income people with disabilities were more likely to rely on public transport or walking. Conclusion: Based on this study’s findings, transportation agencies could design infrastructure and plan for future expansions that is more inclusive and accessible, thus catering to the mobility needs of people with travel-limiting disabilities.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2024

Surrogate-assisted optimization under uncertainty for design for remanufacturing considering material price volatility

Remanufacturing is a well-established end-of-life (EOL) strategy that promises significant savings in energy and carbon emissions. However, the current design practices are not remanufacturing-inclusive, i.e., the majority of products are designed for a single life cycle. As a result, potential products that can sustain multiple life cycles are deprived of additional benefits of being designed for remanufacturing, such as reduced material usage, lower cost, and improved environmental impact. Moreover, the uncertainty in design, material selection, and economics are not considered to produce remanufacturable designs. Accordingly, this research proposes a design for remanufacturing (DfRem) framework that accounts for design uncertainty and material price volatility. The framework systematically explores the design space, performs design optimization under uncertainty, followed by topology optimization to provide additional mass savings, and finally, a price volatility analysis for plausible design material choices. The candidate designs are evaluated based on their design mass, material price volatility, failure mode characteristics, carbon footprint, and embodied energy impacts. The proposed framework's utility is demonstrated via the use of an engine cylinder head case study subjected to thermo-mechanical loads along with fatigue and wear failure. Considering grey cast iron and aluminum alloy as the design material choices, it was found that the cast iron design reduced the initial design mass by 6% as opposed to a 5% decrease for aluminum. On the other hand, about 8% area of the cast iron design failed due to fatigue, compared to 3% for aluminum. Here, we further observed that although the aluminum design provided better mechanical performance than the cast iron design, this material was more expensive and volatile in price.

36 MATERIALS SCIENCE↗
NASA NTRS1986

Practical design of magnetic heading sensors

Although fluxgate magnetometers have been in use for many years, and a number of theoretical studies of these sensors are available, very little information has been published on the engineering choices relating to the detailed design of magnetometers intended for navigational applications in aircraft and other vehicles. This paper addresses some of the problems encountered in the design of the sensing head, the choice of operating mode, and the design of the supporting electronics for a simple low-cost magnetometer system which will produce a digital readout of the magnetic heading of the vehicle in which it is mounted. A major goal of this study has been to develop a design which minimizes circuit complexity, is easy to fabricate and calibrate, and utilizes a minimum of specialized components. Such a magnetometer system is intended either as a stand-alone indicating instrument or as a source of magnetic heading information for a more sophisticated navigational system.

Garner, H. D.↗
NASA NTRSDate not supplied

Crewed Mars Mission Mode Options for Nuclear Electric/Chemical Hybrid Transportation System

NASA's Human Exploration and Operation Mission Directorate is continuing to study different concepts and options to field human Mars missions as part of NASA's Moon2Mars directive. For crewed missions to Mars, the transportation system sizing is highly dependent on the total mission duration, Mars orbit dwell time, mission concept of operations, and the chosen propulsion system. NASA has been investigating the use of low-thrust electric propulsion systems to augment high-thrust chemical propulsion system for crewed Mars mission to enable a more energy-efficient operations. Recent studies on these missions have focused on ``All-Up'' piloted mission modes in which the in-space transportation system for crew transit departs Earth with everything it needs for the roundtrip journey, with only the Mars landers and surface assets pre-deployed. This design choice was made to minimize the mission operation risk, as the crew could return safely to Earth in the event of a failure to rendezvous or other failure of any pre-deployed assets. As the Mars Architecture Team continues to investigate and understand the Mars mission trade space, alternate mission mode studies were conducted to understand their impact to the transportation system. These include pre-positioning return assets and discarding expended stages to reduce the overall system mass.

Patrick R Chai↗
NASA NTRS1963

Vehicle Design for Mars Landing and Return to Mars Orbit

This paper briefly describes three modes for accomplishing the Mars landing mission and compares them on a gross basis to indicate their probable order of merit and to identify design requirements placed on the Mars-excursion module (MEM) by the choice of mode. The paper shows that a flyby-rendezvous mode requiring low weight in earth orbit requires the MEM to enter the Mars atmosphere at velocities ranging from 20,000 to 30,000 ft/sec. The MEM for the flyby-rendezvous mode is not covered in this paper but merits further study. The MEM for the other modes of mission accomplishment begins its active operational sequence in Mars orbit and need not be greatly influenced by the method of delivery to Mars orbit. Parametric studies of the entry problem for two vehicles typifying a ballistic-type and a lifting-body-type were conducted to identify the problems associated with design of a MEM to accommodate the extremes of Mars atmospheric density presently predicted. This brief study indicates that: (a) the presently predicted density extremes of the Mars atmosphere present no serious design problems for a MEM which can operate across the entire band of predicted densities; (b) details of operational requirements and mission objectives will control the choice of configuration rather than entry requirements; and (c) the ballistic-type MEM is lighter and simpler but has less operational flexibility than a high L/D MEM.

Hammock, D. M.↗
NASA NTRS1974

A feasibility study of unmanned rendezvous and docking in Mars orbit: Midterm review

The ascent, rendezvous, docking and sample transfer operations in a potential MSSR mission that uses the Mars orbital rendezvous mode are considered. In order that the design choices made for these operations remain compatible with the rest of the mission, the impact on the Earth launch, Mars landing and orbiting and Earth return phase are also being assessed. The selection and description of a preliminary baseline concept are presented.

Source record↗
DOE OSTI2026

Overview of the physics basis for the ARC fusion power plant

Commonwealth Fusion Systems plans to build ARC as the first fusion power plant at a site in Chesterfield County, Virginia, USA by the early 2030s. We present an overview of analysis comprising the physics basis of the ARC V3A design, a high-magnetic-field tokamak with 𝐵 0 =11.4 T, 𝐼 𝑝 =12.0 MA, 𝑅 0 =4.62 m, 𝑎 =1.18 m. ARC V3A is designed to produce 𝑃 𝑓⁡𝑢⁢𝑠 ≈1.13 GW DT fusion power and deliver ⩾400 MW net electric power to the grid. This overview includes quantitative analysis of fundamental issues for design of and operational plasma scenarios for a tokamak power plant, and lays out the design targets and strategic choices for ARC, including empirical fusion performance projections, assessment of H-mode access, ion cyclotron resonance heating simulations, alpha particle physics and time-dependent full-pulse simulations. This is complemented by topical papers on fusion performance and transport, disruption physics, boundary physics and magnetohydrodynamic stability. Critically, these studies identify key model uncertainties and physics risks to be retired through SPARC operation. Due to the modular nature of ARC, early results from SPARC can be incorporated into the design of the first ARC as well as subsequent replacements of the ARC vacuum vessel.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

DEVELOPMENT OF PLASMA SIMULATION TOOL FOR THE ACCEL-ERATING CAVITIES

Plasma processing of superconducting radio frequency (SRF) cavities has shown an improvement in accelerating gradient by reducing the radiation due to field emission and multipacting. Plasma processing is a common tech-nique where the free oxygen produced by the plasma breaks down and removes hydrocarbons from surfaces. This increases the work function and reduces the second-ary emission coefficient. The hydrocarbon fragments of H2, CO, CO2, and H2O are removed from the system with the process gas which is flowing through the system. Here, we present COMSOL for the first time to simulate the plasma processing of an SRF cavity. In this work, we use Jefferson Lab's C75 SRF cavities design as our case study. Using simulation, we predict the condition of plasma ignition inside the SRF cavity. The simulation provides information about the optimal rf coupling to the cavity, mode for plasma ignition, choice of gas concen-tration, power, and pressure.

Senevirathne, I.↗
DOE OSTI2022

Comparison of Kill Switch Toxins in Plant-Beneficial Pseudomonas fluorescens Reveals Drivers of Lethality, Stability, and Escape

Kill switches provide a biocontainment strategy in which unwanted growth of an engineered microorganism is prevented by expression of a toxin gene. A major challenge in kill switch engineering is balancing evolutionary stability with robust cell killing activity in application relevant host strains. Understanding host-specific containment dynamics and modes of failure helps to develop potent yet stable kill switches. To guide the design of robust kill switches in the agriculturally relevant strain Pseudomonas fluorescens SBW25, we present a comparison of lethality, stability, and genetic escape of eight different toxic effectors in the presence of their cognate inactivators (i.e., toxin–antitoxin modules, polymorphic exotoxin–immunity systems, restriction endonuclease–methyltransferase pair). We find that cell killing capacity and evolutionary stability are inversely correlated and dependent on the level of protection provided by the inactivator gene. Decreasing the proteolytic stability of the inactivator protein can increase cell killing capacity, but at the cost of long-term circuit stability. By comparing toxins within the same genetic context, we determine that modes of genetic escape increase with circuit complexity and are driven by toxin activity, the protective capacity of the inactivator, and the presence of mutation-prone sequences within the circuit. Here, the results of our study reveal that circuit complexity, toxin choice, inactivator stability, and DNA sequence design are powerful drivers of kill switch stability and valuable targets for optimization of biocontainment systems.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Linker Contribution toward Stability of Metal–Organic Frameworks under Ionizing Radiation

Here, the effects of radiation on a series of UiO derivative metal–organic frameworks (MOFs) that contain the same zirconium hexamer node and similar organic linkers, UiO-66, UiO-66–NH 2 , UiO-66–OH, and NU-403, were examined using γ-rays and 5 MeV He ions. UiO-66, UiO-66–NH2, and UiO-66–OH contain aromatic linkers and are significantly more stable to radiation than NU-403. Of these, UiO-66 is the most radiation resistant, displaying crystalline features up to 47 MGy of He-ion irradiation. MOFs containing aromatic linkers functionalized by electron-donating groups, UiO-66–NH 2 and UiO-66–OH, retained crystalline features up to 19 MGy. NU-403 contains aliphatic rings and is the least radiation-resistant MOF studied here. NU-403 exhibits small changes in infrared spectra upon 3 MGy of γ-irradiation and significant damage upon 10 MGy of He-ion irradiation. Diffraction data revealed radiation-induced defect formation. Structural locations of radiation-induced breakdown were interrogated experimentally and via density functional theory. The results indicated changes in the carboxylate (-OCO) of the linker and μ 3 -OH vibrational modes, suggesting that introduction of an aliphatic linker into the MOF renders the connection between the linker and metal node most susceptible to radiation damage. This study reveals that the choice of the linker is crucial in designing a radiation-resistant MOF.

36 MATERIALS SCIENCE↗
NASA NTRS2010

Development of a User Interface for a Regression Analysis Software Tool

An easy-to -use user interface was implemented in a highly automated regression analysis tool. The user interface was developed from the start to run on computers that use the Windows, Macintosh, Linux, or UNIX operating system. Many user interface features were specifically designed such that a novice or inexperienced user can apply the regression analysis tool with confidence. Therefore, the user interface s design minimizes interactive input from the user. In addition, reasonable default combinations are assigned to those analysis settings that influence the outcome of the regression analysis. These default combinations will lead to a successful regression analysis result for most experimental data sets. The user interface comes in two versions. The text user interface version is used for the ongoing development of the regression analysis tool. The official release of the regression analysis tool, on the other hand, has a graphical user interface that is more efficient to use. This graphical user interface displays all input file names, output file names, and analysis settings for a specific software application mode on a single screen which makes it easier to generate reliable analysis results and to perform input parameter studies. An object-oriented approach was used for the development of the graphical user interface. This choice keeps future software maintenance costs to a reasonable limit. Examples of both the text user interface and graphical user interface are discussed in order to illustrate the user interface s overall design approach.

Ulbrich, Norbert Manfred↗
DOE OSTI2022

How do perceptions of safety and car ownership importance affect autonomous vehicle adoption?

In this study, we explicitly modeled how individuals' perceptions of automated vehicle (AV) safety and the importance they place on car ownership affect mode choices involving conventional and automated vehicles in the context of privately owned cars and ridehailing services. We adopted psychometric questions to capture these two latent variables and designed a stated preference survey based on the participants' actual travel patterns. Then, we quantified the impact of these latent variables on mode choices using an integrated choice and latent variable (ICLV) model. We found that both latent variables have a statistically significant effect on mode choices. The results show that car ownership importance has the most potent effect on privately owned cars (conventional car and self-driving car), followed by driverless ridehailing and conventional ridehailing. We also found that changes in safety perception are equivalent to sizable changes in price. In addition, we further investigated the impact of improvements in safety perception through four scenarios. The scenario testing results show that as the distribution of perceived safety is compressed toward positive safety perception, the market share of AVs spikes and dominates regular cars. Our results demonstrate that based on our respondents' current understanding of AVs, even if AV prices were comparable to regular cars, we cannot expect widespread use of AVs. However, improvements in AVs' safety and, consequently, consumer safety perception can considerably expand AVs' market share, and may offset the high cost of using the technology.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2020

Joint Design of Multimodal Transit Networks and Shared Autonomous Mobility Fleets

Providing quality transit service to travelers in low-density areas, particularly travelers without personal vehicles, is a constant challenge for transit agencies. The advent of fully-autonomous vehicles (AVs) and their inclusion in mobility service fleets may allow transit agencies to offer better service and/or reduce their own capital and operational costs. This study focuses on the problem of allocating resources between transit patterns and operating (or subsidizing) shared-use AV mobility services (SAMSs) in a large metropolitan area. To address this question, a joint transit network redesign and SAMS fleet size determination problem (JTNR-SFSDP) is introduced, and a bi-level mathematical programming formulation and solution approach are presented. The upper-level problem modifies a transit network frequency setting problem (TNFSP) formulation via incorporating SAMS fleet size as a decision variable and allowing the removal of bus routes. The lower-level problem consists of a dynamic combined mode choice-traveler assignment problem (DCMC-TAP) formulation. The heuristic solution procedure involves solving the upper-level problem using a nonlinear programming solver and solving the lower-level problem using an iterative agent-based assignment-simulation approach. To illustrate the effectiveness of the modeling framework, this study uses traveler demand from Chicago along with the regions existing multimodal transit network. The computational results indicate significant traveler benefits, in terms of improved average traveler wait times, associated with optimizing the joint design of multimodal transit networks and SAMS fleets compared with the initial transit network design.

bi-level programming↗
DOE OSTI2023

Capturing Travel Mode Adoption in Designing On-Demand Multimodal Transit Systems

This paper studies how to integrate rider mode preferences into the design of on-demand multimodal transit systems (ODMTSs). It is motivated by a common worry in transit agencies that an ODMTS may be poorly designed if the latent demand, that is, new riders adopting the system, is not captured. This paper proposes a bilevel optimization model to address this challenge, in which the leader problem determines the ODMTS design, and the follower problems identify the most cost efficient and convenient route for riders under the chosen design. The leader model contains a choice model for every potential rider that determines whether the rider adopts the ODMTS given her proposed route. To solve the bilevel optimization model, the paper proposes an exact decomposition method that includes Benders optimal cuts and no-good cuts to ensure the consistency of the rider choices in the leader and follower problems. Moreover, to improve computational efficiency, the paper proposes upper and lower bounds on trip durations for the follower problems, valid inequalities that strengthen the no-good cuts, and approaches to reduce the problem size with problem-specific preprocessing techniques. The proposed method is validated using an extensive computational study on a real data set from the Ann Arbor Area Transportation Authority, the transit agency for the broader Ann Arbor and Ypsilanti region in Michigan. The study considers the impact of a number of factors, including the price of on-demand shuttles, the number of hubs, and access to transit systems criteria. The designed ODMTSs feature high adoption rates and significantly shorter trip durations compared with the existing transit system and highlight the benefits of ensuring access for low-income riders. Finally, the computational study demonstrates the efficiency of the decomposition method for the case study and the benefits of computational enhancements that improve the baseline method by several orders of magnitude. Funding: This research was partly supported by National Science Foundation [Leap HI Proposal NSF-1854684] and the Department of Energy [Research Award 7F-30154].

Operations Research & Management Science↗
NASA NTRS1998

Booster Main Engine Selection Criteria for the Liquid Fly-Back Booster

The Liquid Fly-Back Booster (LFBB) Program seeks to enhance the Space Shuttle system safety, performance and economy of operations through the use of an advanced, liquid propellant Booster Main Engine (BME). There are several viable BME candidates that could be suitable for this application. The objective of this study was to identify the key Criteria to be applied in selecting among these BME candidates. This study involved an assessment of influences on the overall LFBB utility due to variations in the candidate rocket-engines characteristics. This includes BME impacts on vehicle system weight, performance, design approaches, abort modes, margins of safety, engine-out operations, and maintenance and support concepts. Systems engineering analyses and trade studies were performed to identify the LFBB system level sensitivities to a wide variety of BME related parameters. This presentation summarizes these trade studies and the resulting findings of the LFBB design teams regarding the BME characteristics that most significantly affect the LFBB system. The resulting BME choice should offer the best combination of reliability, performance, reusability, robustness, cost, and risk for the LFBB program.

Ryan, Richard M.↗
NASA NTRS1998

Booster Main Engine Selection Criteria for the Liquid Fly-Back Booster

The Liquid Fly-Back Booster (LFBB) Program seeks to enhance the Space Shuttle system safety performance and economy of operations through the use of an advanced, liquid propellant Booster Main Engine (BME). There are several viable BME candidates that could be suitable for this application. The objective of this study was to identify the key criteria to be applied in selecting among these BME candidates. This study involved an assessment of influences on the overall LFBB utility due to variations in the candidate rocket engines' characteristics. This includes BME impacts on vehicle system weight, perfortnance,design approaches, abort modes, margins of safety, engine-out operations, and maintenance and support concepts. Systems engineering analyses and trade studies were performed to identify the LFBB system level sensitivities to a wide variety of BME related parameters. This presentation summarizes these trade studies and the resulting findings of the LFBB design teams regarding the BME characteristics that most significantly affect the LFBB system. The resulting BME choice should offer the best combination of reliability, performance, reusability, robustness, cost, and risk for the LFBB program.

Ryan, Richard M.↗
NASA NTRS2009

Impedance Eduction in Ducts with Higher-Order Modes and Flow

An impedance eduction technique, previously validated for ducts with plane waves at the source and duct termination planes, has been extended to support higher-order modes at these locations. Inputs for this method are the acoustic pressures along the source and duct termination planes, and along a microphone array located in a wall either adjacent or opposite to the test liner. A second impedance eduction technique is then presented that eliminates the need for the microphone array. The integrity of both methods is tested using three sound sources, six Mach numbers, and six selected frequencies. Results are presented for both a hardwall and a test liner (with known impedance) consisting of a perforated plate bonded to a honeycomb core. The primary conclusion of the study is that the second method performs well in the presence of higher-order modes and flow. However, the first method performs poorly when most of the microphones are located near acoustic pressure nulls. The negative effects of the acoustic pressure nulls can be mitigated by a judicious choice of the mode structure in the sound source. The paper closes by using the first impedance eduction method to design a rectangular array of 32 microphones for accurate impedance eduction in the NASA LaRC Curved Duct Test Rig in the presence of expected measurement uncertainties, higher order modes, and mean flow.

Watson, Willie R.↗