Search NASA⌕ Search

SEARCH · Search NASA

Results for “model polymers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Electrolyte Immersion Increases Photoconductivity in a Model Polymer Photocathode

Immersing polymer solar cells in aqueous electrolyte for photoelectrochemical (PEC) hydrogen production is likely to cause photophysical changes that could present both challenges and opportunities for engineering functional and durable devices. Herein we study the bulk heterojunction blend poly(4,8-bis(5-(2-ethylhexyl)thiophen-2-yl)benzo[1,2-b:4,5-b']dithiophene-2,6-diyl)-alt-(2-(((2-ethylhexyl)oxy)carbonyl)-3-fluorothieno[3,4-b]thiophene-4,6-diyl):poly(N,N'-di(2-octyldodecyl)naphthalene-1,8:4,5-bis(dicarboximide)-2,6-diyl)-alt-(2,2-bithiophene-5,5'-diyl) (PTB7-Th:N2200) excited-state dynamics in electrolyte from femtosecond to millisecond time scales using pump-probe microwave conductivity and absorption spectroscopy. While the blend swells very little, electrolyte exposure increases the microwave-frequency mobility and possibly the yield of photogenerated charges while also decreasing crystallinity. These results indicate an enhancement in key performance metrics, implying that any limitations on the performance of PEC test devices do not arise from active layer-electrolyte interactions. For the PTB7-Th:N2200 blend or similar photocathode systems, our results indicate that improving the interfacial kinetics and/or the carrier lifetime should be prioritized, not protecting the active layer from the electrolyte. Since this observation may not be universal to all polymer systems, future research should focus on identifying their limiting photophysical processes. electrolyte.

14 SOLAR ENERGY↗
DOE OSTI2024

Vanishing adsorption limit of Riemann problem solutions for the polymer model

Here we examine the vanishing adsorption limit of solutions of Riemann problems for the Glimm–Isaacson model of chemical flooding of a petroleum reservoir. A contact discontinuity is deemed admissible if it is the limit of traveling waves or rarefaction waves for an augmented system that accounts for weak chemical adsorption onto the rock. We prove that this criterion justifies the admissibility criteria adopted previously by Keyfitz–Kranzer, Isaacson–Temple and de Souza–Marchesin, provided that the fractional flow function depends monotonically on chemical concentration. We also demonstrate that the adsorption criterion selects the undercompressive contact discontinuities required to solve the general Riemann problem in an example model with non-monotone dependence.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Viscoelastic Modeling of Polymers in ALEGRA with the GAP Model

The Glassy Amorphous Polymer (GAP) model is a viscoelastic/plastic model developed at Los Alamos National Laboratory to accurately model a variety of polymers across a wide range of conditions and loading rates, including shock loading. In the present report we introduce and assess this model, newly implemented in the ALEGRA shock and multiphysics code, using a series of verification and application-related validation problems. We describe the mathematical and theoretical formulation of the model, as well as its implementation in ALEGRA, in detail. We provide verification results that assess the model implementation against published computational results, as well as validation results which we compare to existing experimental results when possible. These comparisons instill confidence in the implementation and indicate that the addition of the GAP model to the ALEGRA code provides users with a high-fidelity polymer modeling capability that is capable of recreating complex polymer phenomena.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Investigation of desorption of hydrogen gas from polymer matrix using thermal desorption analysis and finite element modeling

Polymer materials are used widely as sealing materials and liners in hydrogen storage and transportation infrastructure. During operating conditions, polymers are exposed to high pressure hydrogen gas periodically. When in contact, the hydrogen gas diffuses through the polymer material with ease due to its smaller sized molecules compared to the polymer molecules. In the event of rapid decompression of outside hydrogen gas, the hydrogen molecules within the polymer diffuse out. This process is known as the desorption of polymer and can cause blisters or cracking causing permanent damage to the polymer. Here, we used a combined experimental and modeling approach to investigate the desorption of the hydrogen gas in the polymer. Thermal desorption analysis (TDA) experiments were performed on the polymer sample exposed to the high-pressure hydrogen gas to measure the diffusion coefficient and equilibrium hydrogen concentration. Experiments also provided the quantity of hydrogen within the polymer during the desorption process which followed Fick’s law. However, for higher pressurization values, some anomaly was observed in the quantity of hydrogen remaining in the polymer sample. A continuum mechanics based coupled diffusion–deformation-damage model was deployed to simulate the gas desorption process in the material using the finite element method to understand its effect on the material. It was found that the anomaly in TDA results were due to the blister formation on the polymer surface which resulted in longer hydrogen retention. Simulations also showed that blister formation can be affected by multiple parameters such as the addition of filler particles, and pre-existing cavity size.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Chromatin structures from integrated AI and polymer physics model

The physical organization of the genome in three-dimensional space regulates many biological processes, including gene expression and cell differentiation. Three-dimensional characterization of genome structure is critical to understanding these biological processes. Direct experimental measurements of genome structure are challenging; computational models of chromatin structure are therefore necessary. We develop an approach that combines a particle-based chromatin polymer model, molecular simulation, and machine learning to efficiently and accurately estimate chromatin structure fromindirectmeasures of genome structure. More specifically, we introduce a new approach where the interaction parameters of the polymer model are extracted from experimental Hi-C data using a graph neural network (GNN). We train the GNN on simulated data from the underlying polymer model, avoiding the need for large quantities of experimental data. The resulting approach accurately estimates chromatin structures across all chromosomes and across several experimental cell lines despite being trained almost exclusively on simulated data. The proposed approach can be viewed as a general framework for combining physical modeling with machine learning, and it could be extended to integrate additional biological data modalities. Ultimately, we achieve accurate and high-throughput estimations of chromatin structure from Hi-C data, which will be necessary as experimental methodologies, such as single-cell Hi-C, improve.

Biochemistry & Molecular Biology↗
DOE OSTI2026

Two-population Rouse models for polymer segmental dynamics in nanocomposites

Segmental dynamics of polymer chains in a model nanocomposite of poly(ethylene oxide) and silica nanoparticles (NPs) was investigated using quasielastic neutron scattering. The dynamics can be accurately described with the Rouse model. The bulklike polymer far from the NP surface behaves as the neat polymer. However, the slower polymer in the interface close to the NP surface is described either with a second Rouse population with different relaxation time or using the suppressed Rouse model. These simple two-population models accurately reproduce the experimental data, with the suppressed Rouse model describing topological constraints, on average, every 12 beads with an interfacial thickness up to 13.5 beads, and the effect of the interface extending to a layer of thickness comparable to the end-to-end distance of the polymer. This modeling provides an explanation for the observed reinforcement in PNC even at low loadings, consistent with current understanding of the relevance of the interphase.

Composite materials↗
DOE OSTI2023

Transferring a Molecular Foundation Model for Polymer Property Predictions

Transformer-based large language models have remarkable potential to accelerate design optimization for applications such as drug development and material discovery. Self-supervised pretraining of transformer models requires large-scale data sets, which are often sparsely populated in topical areas such as polymer science. Further, state-of-the-art approaches for polymers conduct data augmentation to generate additional samples but unavoidably incur extra computational costs. In contrast, large-scale open-source data sets are available for small molecules and provide a potential solution to data scarcity through transfer learning. In this work, we show that using transformers pretrained on small molecules and fine-tuned on polymer properties achieves comparable accuracy to those trained on augmented polymer data sets for a series of benchmark prediction tasks.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

A multiscale anisotropic polymer network model coupled with phase field fracture

The study of polymers has continued to gain substantial attention due to their expanding range of applications, spanning essential engineering fields to emerging domains like stretchable electronics, soft robotics, and implantable sensors. These materials exhibit remarkable properties, primarily stemming from their intricate polymer chain network, which, in turn, increases the complexity of precisely modeling their behavior. Especially for modeling elastomers and their fracture behavior, accurately accounting for the deformations of the polymer chains is vital for predicting the rupture in highly stretched chains. Despite the importance, many robust multiscale continuum frameworks for modeling elastomer fracture tend to simplify network deformations by assuming uniform behavior among chains in all directions. Recognizing this limitation, our study proposes a multiscale fracture model that accounts for the anisotropic nature of elastomer network responses. At the microscale, damage in the chains is assumed to be driven by both the chain's entropy and the internal energy due to molecular bond distortions. In order to bridge the stretching in the chains to the macroscale deformation, we employ the maximal advance path constraint network model, inherently accommodating anisotropic network responses. As a result, chains oriented differently can be predicted to exhibit varying stretch and, consequently, different damage levels. To drive macroscale fracture based on damages in these chains, we utilize the micromorphic regularization theory, which involves the introduction of dual local-global damage variables at the macroscale. The macroscale local damage variable is obtained through the homogenization of the chain damage values, resulting in the prediction of an isotropic material response. The macroscale global damage variable is subjected to nonlocal effects and boundary conditions in a thermodynamically consistent phase field continuum formulation. Moreover, the total dissipation in the system is considered to be mainly due to the breaking of the molecular bonds at the microscale. To validate our model, we employ the double-edge notched tensile test as a benchmark, comparing simulation predictions with existing experimental data. Additionally, to enhance our understanding of the fracturing process, we conduct uniaxial tensile experiments on a square film made up of polydimethylsiloxane (PDMS) rubber embedded with a hole and notches and then compare our simulation predictions with the experimental observations. Furthermore, we visualize the evolution of stretch and damage values in chains oriented along different directions to assess the predictive capacity of the model. In conclusion, the results are also compared with another existing model to evaluate the utility of our model in accurately simulating the fracture behavior of rubber-like materials.

42 ENGINEERING↗
DOE OSTI2024

Bayesian calibration and uncertainty quantification of a rate-dependent cohesive zone model for polymer interfaces

In this work we present a rate-dependent cohesive zone model for the fracture of polymeric interfaces and performs a Bayesian calibration, an uncertainty quantification, and a sensitivity analysis for the model. The proposed cohesive zone model accounts for both reversible elastic and irreversible rate-dependent separation sliding deformation at the interface. The viscous dissipation due to the irreversible opening at the interface is modeled using elastic-viscoplastic kinematics that incorporates the effects of strain rate. Inverse calibration of parameters for such complex models through trial and error is challenging due to the large number of parameters of the model. Moreover, the calibrated parameter values are often non-unique and uncertain when the available experimental data is limited. To tackle this challenge, we employ a Bayesian calibration approach to identify parameters from experimental data, the resulting parameters significantly enhance the accuracy of the model. To quantify the uncertainty associated with the inverse parameter estimation, a modular Bayesian approach is employed to calibrate the unknown model parameters, accounting for the parameter uncertainty of the cohesive zone model. The advantages of the Bayesian calibration over a deterministic parameter fit are demonstrated. Further, to quantify the model uncertainties, such as incorrect assumptions or missing physics, a discrepancy function is introduced, which significantly improves the model’s prediction. Finally, the total uncertainty of the model is quantified in a predictive setting. A sensitivity analysis is performed to assess how changes in the input variables of the model affect the peak load, facilitating the identification of a concise set of highly influential parameters. The present approach can be used for calibration and uncertainty quantification for other complex computational mechanics models. It should also facilitate the designing of interface materials under uncertainty.

42 ENGINEERING↗
DOE OSTI2024

Modeling hyperbranched polymer formation via ATRP using dissipative particle dynamics

Hyperbranched polymers (HBPs) offer distinguishing, advantageous properties that arise from their distinctive complex topology. One of the effective approaches to the synthesis of hyperbranched structures involves the use of a branching initiator (inibramer) that is activated only after incorporation into a polymer chain. There remain, however, challenges in determining and characterizing the structures of the synthesized HBPs. Dissipative particle dynamics (DPD) was used to probe the effects of inibramer concentration, solvent concentration, and inibramer reactivity on the kinetics, molecular weight, and dispersity of HBPs. Additionally, DPD allows for direct observation of branched structures, which was not possible in previously reported Monte Carlo type simulations. It was found that higher inibramer concentrations led to faster monomer consumption while forming more dendritic structures with fewer defects. Additionally, high dispersities characteristic of HBP systems were found to originate from asymmetric propagation rates between inibramer-inibramer and inibramer-monomer reactions.

Biswas, Santidan↗
DOE OSTI2025

Key Factors in Semi-Generic Coarse-Grained Modeling of Solid Polymer Electrolytes

Given the long length and time scales of interest and strong interactions present in solid polymer electrolytes, coarse-grained molecular models can be useful in understanding the molecular basis of their structure and transport properties. Rather than representing atoms individually, coarse-grained models use beads representing groups of atoms, making the system simpler and more efficient. Generic coarse-grained models, that are not built based on matching a particular atomistic system, can provide insight into the important physical considerations that apply across different chemical systems, though it can be unclear how to best match to experimental systems and capture relevant experimental behaviors with as simple of a model as possible. Here, we build on generic bead-spring models, but use stiff angle potentials, set different bead properties for different polymer types, and include additional ion parameters, creating a semi-generic coarse-grained model that can map more specifically to polymers and copolymers with different chain architectures, component glass transition temperatures, and ion solvation behaviors. We set most parameters with basic homopolymer data such as glass transition temperatures, Kuhn length, density, and dielectric constant, with further adjustment based on data from the polymer electrolyte system. We specifically model polystyrene-block-poly(oligo-oxyethylene methyl ether methacrylate) (PS-b-POEM) with lithium triflate salt, considering the POEM to be made of a poly(methylmethacrylate) backbone with poly(ethylene oxide) side chains. Solvation of ions is accounted for by additional polymer-ion interactions of the form -S/r4, plus additional lithium-polymer Lennard-Jones interactions. We find these potentials have different effects and discuss strategies for setting these parameters.

Zhang, Yuanhao↗
DOE OSTI2023

Molecular-Weight-Dependent Infiltration and Adsorption of Polymers into Nanochannels

The mesoporous silica shell coating hydrogenolysis nano-catalysts alters the molecular weight distributions of cleaved polymer chains compared to catalysts without a shell. The shell, composed of radially aligned narrow cylindrical nanopores, reduces the formation of low-valued gaseous products and increases the median molecular weight of the product, thus enhancing the value of the products for polymer upcycling. Here, to understand the role of the mesoporous shell, we have studied the spatial distribution of polystyrene chains, used as a model polymer, in the nanochannels in both the melt phase and solution phase. In the melt, we observed from small-angle X-ray scattering experiments that the infiltration rate of the polymer into the nanochannels is inversely proportional to the molecular weight, which is consistent with theory. In theta solution experiments using UV–vis spectroscopy, we found that the shell significantly enhances polymer adsorption compared to nanoparticles without pores. In addition, the degree of polymer adsorption is not a monotonic function of molecular weight but initially increases with the molecular weight before eventually decreasing. The molecular weight for the peak adsorption increases with the pore diameter. This adsorption behavior is rationalized as resulting from a balance between the mixing entropy gain by surface adsorption and the conformational entropy penalty incurred by chains confined in the nanochannels. The spatial distribution of polymer chains in the nanochannels is visualized by energy-dispersive X-ray spectroscopy (EDX), and inverse Abel-transformed data reveals a less uniform polymer distribution along the primary pore axis for longer chains.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Using Ultrasonics to Optimize the Processing Parameters of Thermoset Polymers [Slides]

Ultrasonics is used as a non-destructive evaluation method to improve our understanding of polymers. Coupling ultrasonics and FTIR can help determine which bonds are more relevant to the mechanical properties of the polymer. Modeling the cure kinetics can determine if the curing process of a sample deviates from the baseline. Cure kinetics influence the final chemical structure of the polymer. This method opens a new pathway to design and adapt polymers for high demanding applications.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Generalized vs. fractional: a comparative analysis of Maxwell models applied to entangled polymer solutions

Fractional viscoelastic models provide an excellent description of rheological data for polymer systems with power-law behaviour. However, the physical interpretation of their model parameters, which carry fractional units of time, often remains elusive. We show that for poly(ethylene oxide) (PEO) solutions, the fractional Maxwell model (FMM) requires much fewer model parameters than the classical generalized Maxwell model for a good description of the data and that it can be applied consistently to solutions with varying degrees of viscoelasticity. Despite their fractional units, the parameters exhibit scaling laws similar to classical parameters as a function of polymer concentration.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Understanding the Influence of Chain Architecture on the Transport Quantities of Polymer Electrolytes with Covalently Bonded Anions

Here, we use a combination of experiments and coarse-grained molecular dynamics simulations to elucidate the structure–property relationships in polymer electrolytes obtained by the copolymerization of poly(vinyl ethylene carbonate─lithium styrene bis(trifluoromethanesulfonyl)imide) or p(VEC-LiSTFSI). Experiments show that the conductivity reduces with increasing anion (i.e., STFSI) fraction on the chain, and the cation transference number (t + ) is found to be dependent on the anion fraction. Furthermore, a significant fraction of unpolymerized VEC monomers are observed. Since it is inherently difficult to experimentally control the chain architecture and the amount of unpolymerized VEC in these systems, we perform coarse-grained molecular dynamics simulations on model polymer systems with different chain architectures to mimic the plausible experimental systems. Specifically, we look at the differences in transference numbers arising from (i) a random copolymer of VEC and STFSI monomers; (ii) a blend of VEC-STFSI copolymer with VEC monomers; and (iii) a ternary blend of the VEC homopolymer, STFSI homopolymers, and VEC monomers. The ternary blend model demonstrates the closest resemblance with the experimental transference numbers and diffusivities. The lithium diffusivity obtained from the coarse-grained models with VEC monomers (plasticizers) is about 1.5 times that of the model without VEC monomers, showing that the plasticizing effect of VEC monomers is modest. We rationalize the experimental observations based on aggregate and cluster analyses obtained from molecular simulations. This work reveals that polymer electrolyte chain architecture and plasticizers can critically influence the transport properties, and these parameters should be considered when designing single ion conducting polymeric electrolytes.

cluster distribution↗
DOE OSTI2023

Highly stretchable polymer semiconductor thin films with multi-modal energy dissipation and high relative stretchability

Abstract Stretchable polymer semiconductors (PSCs) have seen great advancements alongside the development of soft electronics. But it remains a challenge to simultaneously achieve high charge carrier mobility and stretchability. Herein, we report the finding that stretchable PSC thin films (<100-nm-thick) with high stretchability tend to exhibit multi-modal energy dissipation mechanisms and have a large relative stretchability ( rS ) defined by the ratio of the entropic energy dissipation to the enthalpic energy dissipation under strain. They effectively recovered the original molecular ordering, as well as electrical performance, after strain was released. The highest rS value with a model polymer (P4) exhibited an average charge carrier mobility of 0.2 cm 2 V −1 s −1 under 100% biaxial strain, while PSCs with low rS values showed irreversible morphology changes and rapid degradation of electrical performance under strain. These results suggest rS can be used as a parameter to compare the reliability and reversibility of stretchable PSC thin films.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Toward Standardized Microscale Tensile Testing for Two‐Photon Polymerization‐Fabricated Materials in Liquid

Two-photon polymerization (TPP) enables the fabrication of intricate 3D microstructures with submicron precision, offering significant potential in biomedical applications like tissue engineering. In such applications, to print materials and structures with defined mechanics, it is crucial to understand how TPP printing parameters impact the material properties in a physiologically relevant liquid environment. Herein, an experimental approach utilizing microscale tensile testing (μTT) for the systematic measurement of TPP-fabricated microfibers submerged in liquid as a function of printing parameters is introduced. Using a diurethane dimethacrylate-based resin, the influence of printing parameters on microfiber geometry is first explored, demonstrating cross-sectional areas ranging from 1 to 36 μm 2 . Tensile testing reveals Young's moduli between 0.5 and 1.5 GPa and yield strengths from 10 to 60 MPa. The experimental data show an excellent fit with the Ogden hyperelastic polymer model, which enables a detailed analysis of how variations in writing speed, laser power, and printing path influence the mechanical properties of TPP microfibers. The μTT method is also showcased for evaluating multiple commercial resins and for performing cyclic loading experiments. Collectively, this study builds a foundation toward a standardized microscale tensile testing framework to characterize the mechanical properties of TPP printed structures.

mechanical characterization↗