Search NASA⌕ Search

SEARCH · Search NASA

Results for “molecular anisotropy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Effect of molecular anisotropy on the intensity and degree of polarization of light scattered from model atmospheres

Computations of the intensity, flux, degree of polarization, and the positions of neutral points are presented for models of the terrestrial gaseous and hazy atmospheres by incorporating the molecular anisotropy due to air in the Rayleigh scattering optical thickness and phase matrix. Molecular anisotropy causes significant changes in the intensity, flux and the degree of polarization of the scattered light. The positions of neutral points do not change significantly. When the Rayleigh scattering optical thickness is kept constant and the molecular anisotropy factor is included only in the Rayleigh phase matrix, the flux does not change and the intensity and positions of neutron points change by a small amount. The changes in the degree of polarization are still significant.

Bahethi, O. P.↗
NASA NTRS1980

Effect of molecular anisotropy on the intensity and degree of polarization of light scattered from model atmospheres

Computations of the properties of sunlight scattered from models of the earth-atmosphere system are presented to show the effect of molecular anisotropy on the intensity, flux, and degree of polarization of the scattered light. The values of these parameters change significantly when the anisotropy factor is neglected in the molecular optical thickness and scattering phase matrix. However, if the Rayleigh scattering optical thickness is kept constant and the molecular anisotropy factor is included only in the Rayleigh phase matrix, the flux does not change, the intensity changes by a small amount, but the changes in the degree of polarization are still significant.

Bahethi, O. P.↗
NASA NTRS1978

Effect of molecular anisotropy on beam scattering measurements

Within the energy sudden approximation, the total integral and total differential scattering cross sections are given by the angle average of scattering cross sections computed at fixed rotor orientations. Using this formalism the effect of molecular anisotropy on scattering of He by HCl and by CO is examined. Comparisons with accurate close coupling calculations indicate that this approximation is quite reliable, even at very low collision energies, for both of these systems. Comparisons are also made with predictions based on the spherical average of the interaction. For HCl the anisotropy is rather weak and its main effect is a slight quenching of the oscillations in the differential cross sections relative to predictions of the spherical averaged potential. For CO the anisotropy is much stronger, so that the oscillatory pattern is strongly quenched and somewhat shifted. It appears that the sudden approximation provides a simple yet accurate method for describing the effect of molecular anisotropy on scattering measurements.

Goldflam, R.↗
DOE OSTI2024

Driving macro-scale transformations in three-dimensional-printed biopolymers through controlled induction of molecular anisotropy at the nanoscale

Motivated by the need to harness the properties of renewable and biodegradable polymers for the design and manufacturing of multi-scale structures with complex geometries, we have employed our additive manufacturing platform that leverages molecular self-assembly for the production of metre-scale structures characterized by complex geometries and heterogeneous material composition. As a precursor material, we used chitosan, a chemically modified form of chitin, an abundant and sustainable structural polysaccharide. We demonstrate the ability to control concentration-dependent crystallization as well as the induction of the preferred orientation of the polymer chains through the combination of extrusion-based robotic fabrication and directional toolpathing. Anisotropy is demonstrated and assessed through high-resolution micro-X-ray diffraction in conjunction with finite element simulations. Using this approach, we can leverage controlled and user-defined small-scale propagation of residual stresses to induce large-scale folding of the resulting structures.

36 MATERIALS SCIENCE↗
DOE OSTI2025

On-lattice kinetic Monte Carlo approaches for modeling molecular anisotropy in resveratrol crystallization

Stilbenes are a class of organic compounds with broad-ranging pharmaceutical and agricultural applications, which are typically isolated and purified through recrystallization. We are motivated by reducing experimental waste and optimizing yield via developing predictive simulations for processing-dependent crystal morphologies. Using resveratrol as a model stilbene system, we have developed an approach for simulating crystallization with molecular resolution using on-lattice kinetic Monte Carlo. In this work, we highlight modifications to the Stochastic Parallel PARticle Kinetic Simulator (SPPARKS) software package, which were essential to this application. Key enhancements include the incorporation of non-orthogonal cell shapes and monomer anisotropy approximations using bound hard spheres. This new SPPARKS application has been applied to resveratrol with attachment energy libraries obtained from density functional theory, resulting in excellent agreement with experimental morphology prediction.

crystallization↗
DOE OSTI2024

Ferromagnetic Exchange and Slow Magnetic Relaxation in Cobalt Bis(1,2-dithiolene)-Bridged Dilanthanide Complexes

The construction of multinuclear lanthanide-based molecules with significant magnetic exchange interactions represents a key challenge in the realization of single-molecule magnets with high operating temperatures. Here, we report the synthesis and magnetic characterization of two series of heterobimetallic compounds, (Cp* 2 Ln) 2 (μ-Co(pdt) 2 ) (Ln = Y 3+ , Gd 3+ , Dy 3+ ; pdt 2– = 1,2-diphenylethylenedithiolate) and [K(18-crown-6)][(Cp* 2 Ln) 2 (μ-Co(pdt) 2 )] (Ln = Y 3+ , Gd 3+ ), featuring two lanthanide centers bridged by a cobalt bis(1,2-dithiolene) complex. Dc magnetic susceptibility data collected for the Gd congeners indicate significant Gd–Co ferromagnetic exchange interactions with fits affording J = +11.5 and +7.33 cm –1 , respectively. Magnetization decay and ac magnetic susceptibility measurements carried out on the single-molecule magnet (Cp* 2 Dy) 2 (μ-Co(pdt) 2 ) reveal full suppression of quantum tunneling and open-loop hysteresis persisting up to 3.5 K. These results, along with those of high-field EPR spectroscopy, suggest that transition metalloligands can enforce strong exchange interactions with adjacent lanthanide centers while maintaining a geometry that preserves molecular anisotropy. Furthermore, the magnetic properties of [K(18-crown-6)][(Cp* 2 Gd) 2 (μ-Co(pdt) 2 )] show that increasing the spin of the ground state of the bridging complex may be a viable alternative to increasing J in obtaining well-isolated, strongly coupled magnetic ground states.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1969

Dipole properties of molecular hydrogen.

Molecular hydrogen electron scattering, optical refractivity and molecular anisotropy used to construct model dipole spectrum consistent with oscillator strength rules

Dalgarno, A.↗
DOE OSTI2023

T 1 Anisotropy Elucidates Spin Relaxation Mechanisms in an S = 1 Cr(IV) Optically Addressable Molecular Qubit

Paramagnetic molecules offer unique advantages for quantum information science owing to their spatial compactness, synthetic tunability, room-temperature quantum coherence, and potential for optical state initialization and readout. However, current optically addressable molecular qubits are hampered by rapid spin–lattice relaxation ( T 1 ) even at sub-liquid nitrogen temperatures. Here, we use temperature- and orientation-dependent pulsed electron paramagnetic resonance (EPR) to elucidate the negative sign of the ground state zero-field splitting (ZFS) and assign T 1 anisotropy to specific types of motion in an optically addressable S = 1 Cr(o-tolyl) 4 molecular qubit. The anisotropy displays a distinct sin 2 (2θ) functional form that is not observed in S = 1/2 Cu(acac) 2 or other Cu(II)/V(IV) microwave addressable molecular qubits. The Cr(o-tolyl) 4 T 1 anisotropy is ascribed to couplings between electron spins and rotational motion in low-energy acoustic or pseudoacoustic phonons. Our findings suggest that rotational degrees of freedom should be suppressed to maximize the coherence temperature of optically addressable qubits.

magnetic properties↗
DOE OSTI2023

Applying Bayesian inference and deterministic anisotropy to retrieve the molecular structure ∣Ψ(R)∣2 distribution from gas-phase diffraction experiments

Abstract Currently, our general approach to retrieving molecular structures from ultrafast gas-phase diffraction heavily relies on complex ab initio electronic or vibrational excited state simulations to make conclusive interpretations. Without such simulations, inverting this measurement for the structural probability distribution is typically intractable. This creates a so-called inverse problem. Here we address this inverse problem by developing a broadly applicable method that approximates the molecular frame structure ∣Ψ( R , t )∣ 2 distribution independent of these complex simulations. We retrieve the vibronic ground state ∣Ψ( R )∣ 2 for both simulated stretched NO 2 and measured N 2 O. From measured N 2 O, we observe 40 mÅ coordinate-space resolution from 3.75 Å −1 reciprocal space range and poor signal-to-noise, a 50X improvement over traditional Fourier transform methods. In simulated NO 2 diffraction experiments, typical to high signal-to-noise levels predict 100–1000X resolution improvements, down to 0.1 mÅ. By directly measuring the width of ∣Ψ( R )∣ 2 , we open ultrafast gas-phase diffraction capabilities to measurements beyond current analysis approaches. This method has the potential to effectively turn gas-phase ultrafast diffraction into a discovery-oriented technique to probe systems that are prohibitively difficult to simulate.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2025

Spectra-Orthogonal Optical Anisotropy in Wafer-Scale Molecular Crystal Monolayers

Controlling the spectral and polarization response of two-dimensional (2D) crystals is vital for developing ultrathin platforms for compact optoelectronic devices. However, independently tuning optical anisotropy and spectral response remains challenging in conventional semiconductors due to the intertwined nature of their lattice and electronic structures. Here, we report spectra-orthogonal optical anisotropy─where polarization anisotropy is tuned independently of spectral response─in wafer-scale, one-atom-thick 2D molecular crystal (2DMC) monolayers synthesized on monolayer transition-metal dichalcogenide (TMD) crystals. Utilizing the concomitant spectral consistency and structural tunability of perylene derivatives, we demonstrate tunable optical polarization anisotropy in 2DMCs with similar spectral profiles, as confirmed by room-temperature scanning tunneling microscopy and cross-polarized reflectance microscopy. Additional angle-dependent analysis of the single-crystal and polycrystalline molecular domains reveals an epitaxial relationship between the 2DMC and TMD. In conclusion, our results establish a scalable, molecule-based 2D crystalline platform for unique and tunable functionalities unattainable in covalent 2D solids.

2D materials↗
DOE OSTI2025

Mesoporous Thin Film Architectures: Addressing Material Demands through Molecular Self-Assembly

Mesoporous thin films spark interest across a wide range of disciplines due to their tunable nanostructures, large internal surface areas, and strong compatibility with planar optical, electronic, and microfluidic devices. While attention in the porous materials community has shifted toward macroporous or disordered nanoporous systems, a resurgence in mesoporous thin film research is underway, driven by new molecular self-assembly methods, advanced materials chemistry, and improved characterization techniques. The integration of high-χN block copolymer design, kinetically persistent micelle templating, and postdeposition processing protocols now allows control over structural parameters such as pore size, wall thickness, porosity, and connectivity. These advances have overcome many of the thermodynamic and processing constraints that previously limited widespread adoption. Rather than serving only as high-surface-area supports, mesoporous thin films are engineered as active interfaces where responsive chemistries and nanoscale confinement act in tandem. Embedding switchable ligands, thermoresponsive polymers, redox mediators, or ion-selective groups directly within the pore walls enables real-time control over transport, optical, and electrochemical properties. These capabilities open up new directions in adaptive coatings, gated membranes, and fast-response biosensors. To further expand their functional scope, mesoporous films are integrated into hierarchical and multicomponent architectures. Techniques such as triblock terpolymer templating, crack-directed assembly, and nanoimprint lithography allow for control over spatial organization on the micron and submicron scale and pore system orientation. This enables programmable anisotropy, enhanced molecular diffusion, and wavelength-selective photonic behavior, essential for next-generation sensing, catalysis, and energy applications. Such structural and functional complexity requires equally sophisticated characterization. Multimodal and in situ techniques can track material dynamics under operational conditions. Recent progress includes extended-range ellipsometric porosimetry (EP) for hierarchical architectures, vacuum EP for interface energetics, time-resolved EP for diffusion kinetics, and correlative AFM-SAXS mapping. The introduction of advanced neutron-based spectroscopies, particularly quasielastic neutron scattering (QENS), promises to provide real-time access to ion transport dynamics and segmental motion under nanoscale confinement, offering a path toward deeper mechanistic understanding of structure-performance correlations in mesoporous systems. This Account reflects the technical advances made and the interdisciplinary collaborations that have shaped our collective vision. The particular dimensions of mesopores enable us to subtly tune interactions at the molecular, interfacial, and mesoscopic levels that permit us to harness nanoconfinement. What emerges is a versatile, modular platform capable of chemical gating, energy transduction, and sensing with a level of tunability unmatched by other porous materials. We highlight critical challenges including the need for more robust large-area processing, a deeper understanding of dynamic behavior under cycling, and better integration with device-level architectures. Our strategies support the transition of mesoporous thin films into active high-performance components in next-generation energy, environmental, and biomedical systems.

oxides↗
DOE OSTI2023

Multiparametric optical label-free imaging to analyze plant cell wall assembly and metabolism. (Final Report)

Plant tissues are often considered not ideal for fluorescence imaging because of the pervasive intrinsic fluorescence of many plant metabolites and the intricate interactions with light of the many semi-crystalline polymers at the cell wall. Our project aims to take advantage of this observed shortcoming by developing a label-free, optical microscopy platform for characterizing multiple fingerprints of important cell wall components and stress-related, at subcellular scale resolution. The new imaging system can collect fingerprints from both emitted and scattered light that can inform on the chemical nature, subcellular distribution, anisotropy, and molecular environment of multiple cell wall components in intact plant tissues. We are combining these imaging capabilities with computational tools that enable correlated registration, integration, and analysis. This fully integrated, multiparametric optical system will be used to address biological problems connected to cell wall assembly in grasses. This includes a focus on developmental and environmental variation of cell wall impregnation with silica, lignin, suberin, and cutin in different tissues and cell types. Our research plan comprises three main goals: (1) To develop an accessible imaging platform and associated open-source software able to extract and integrate fingerprints from fluorescence-associated (multispectral emission, lifetime, and polarization), wide-field polarimetry, second harmonic generation (SHG), and stimulated Raman scattering signals (SRS); (2) To determine unique combination of fingerprints for various cell wall components and selected metabolites; (3) To analyze the process of cell wall silicification in grasses and determine how silicification affects cell wall properties and lignin, cutin, and suberin deposition in other cell types under differ stress conditions.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS1998

Computer Simulation of the far Infrared Collision Induced Absorption Spectra of Gaseous CO2

Far infrared collision induced absorption spectra of gaseous CO2 were computed using molecular dynamics simulations. The quadrupole and hexadecapole multipolar induction, through the trace, and the anisotropy of the molecular polarizability were found to be insufficient to represent properly the dipole induction mechanism. For a detailed analysis of the induction process the spectra obtained were decomposed into components resulting from different terms of the induced dipole. Based on this decomposition, all additional overlap contribution for each term was proposed. When spectra were recomputed including such overlap, good agreement between experiment and simulation was achieved over the temperature range at which measurements exist (233-400 K). The use of an anisotropic intermolecular potential was found to be of critical importance for obtaining the right shape of the far wings of the spectra.

Gruszka, Marcin↗