Search NASA⌕ Search

SEARCH · Search NASA

Results for “monitoring verification and reporting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Voucher Opportunity 5-15: Independent Assessment of Monitoring, Reporting, and Verification (MRV) Technologies and Practices for Enhanced Rock Weathering (CRADA 718) Abstract

Development of robust, transparent, and precise monitoring, reporting, and verification (MRV) technologies and practices is critical for carbon dioxide removal (CDR) project developers to comply with regulatory and permitting requirements, voluntary carbon market (VCM) protocols, and to ensure safety while reducing environmental impacts. Enhanced rock weathering (ERW)-based CDR technologies focus on removing atmospheric carbon through conversion into thermodynamically stable solid or aqueous carbonate forms for permanent storage (i.e., mineralization). This highly durable form of CDR enhances naturally occurring silicate rock weathering cycles by optimizing application of finely-ground silicate rock particles (i.e., from basalt) on terrestrial agricultural lands to accelerate natural silicate rock weathering and mineralization. Enhanced rock weathering may also provide improved crop yields and enhance soil health. A critical aspect for commercialization of these technologies is the development of MRV to quantify the net removal and durable storage of atmospheric CO 2 . For ERW systems, it is essential to accurately characterize the mineral feedstock selected for application to establish the baseline geochemical composition, mineral dissolution rates, and carbon removal potential of the feedstocks to estimate overall net removal. Given the difficulty with conducting MRV for ERW in diverse soil/environment types, over large application areas, and due to complex chemical reaction networks, this project will accelerate understanding towards consensus on best practices for MRV. The overall objectives of the proposed voucher project are to: 1) Characterize and analyze feedstock(s) intended for ERW field application by Lithos Carbon (“Voucher Recipient”/ “CRADA Participant”) to determine overall mineralization potential; 2) Facilitate knowledge transfer and documentation of experimental protocols, instrumentation, and other relevant best practices; and 3) Support the Voucher Recipient’s broader technology commercialization and ERW Research Facility development plans. This work will align with the Voucher Recipient’s MRV plans for field sites and build upon complementary efforts conducted by PNNL on mineralization MRV.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Monitoring, Reporting, and Verification (MRV) Plan - Meeting EPA Guidelines for GHGRP and Subpart RR

The Midwest Regional Carbon Sequestration Partnership (MRCSP) was founded in 2003 as part of the U.S. Department of Energy’s (DOE’s) Regional Carbon Sequestration Partnership initiative. Since its founding, MRCSP has made significant strides toward making CCUS a viable option for states in the region. The public/private consortium, funded through the DOE Regional Carbon Sequestration Initiative, brings together nearly 40 industry partners and 10 states. Battelle, as the project lead, oversees research, development and operations and coordinates activities among the partners. The incremental, phased approach has built a valuable knowledge base for the industry and paved the way for commercial-scale adoption of CCUS technologies. From 2008 to 2020, MRCSP Phase III focused on the development of large-scale injection projects. This report is part of a series of reports prepared under the Midwestern Regional Carbon Sequestration Partnership (MRCSP) Phase III (Development Phase). These reports summarize and detail the findings of the work conducted under the Phase III project. This report summarizes the steps for successfully submitting a Monitoring, Reporting and Verification (MRV) plan to the U.S. Environmental Protection Agency (EPA). This work used the lessons learned from various MRCSP tasks to demonstrate the geologic understanding of the reefs in Northern Niagaran Pinnacle Reef Trend (NNPRT), successful monitoring and accounting methodologies, understanding of potential risks and leakage pathways, and mass balance of CO2 baseline and net storage. The plan encompasses ten reefs and provides a reporting plan for future reef development.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2021

Monitoring, Reporting, and Verification Plan (MRV)- Meeting EPA Guidelines for GHGRP and Subpart RR

This report summarizes the process and work completed to develop and successfully submit an MRV plan to EPA. This work used the lessons learned from various MRCSP tasks to demonstrate the geologic understanding of the Niagaran reefs, successful monitoring and accounting methodologies, understanding of potential risks and leakage pathways, and mass balance of CO2 baseline and net storage. The plan currently encompasses 10 reefs and also provides a reporting plan for future reef development.

accounting↗
DOE OSTI2024

Monitoring, Reporting, and Verification Considerations for Carbon Dioxide Removal

The project investigates Measurement, Reporting, and Verification (MRV) methods for Enhanced Weathering and Marine Carbon Dioxide Removal (mCDR) technologies. Enhanced Weathering accelerates natural mineral processes to capture CO2, while mCDR leverages oceanic processes for carbon sequestration. The study focuses on developing standardized MRV protocols, assessing environmental impacts, and evaluating the scalability and economic feasibility of these carbon sequestration methods. The goal is to ensure reliable and transparent data for validating and improving CO2 removal technologies.

Priyadarshini↗
NASA NTRSDate not supplied

Mapping National Forest Aboveground Biomass in Mexico by Integrating GEDI, Sentinel‐1 and Sentinel‐2 Data

Accurate mapping of forest aboveground biomass density (AGBD) is required to better understand the role of forests in the global carbon cycle and to support international policies for climate change mitigation and adaptation. Mexico is one of the countries having great potential for the United Nations Programme on Reducing Emissions from Deforestation and Forest Degradation (or UN-REDD program) and there is a growing demand for unbiased Monitoring Reporting Verification systems at a national level. As an effort under NASA’s Carbon Monitoring System (CMS) program, we developed a machine learning model using multi-stream remote sensing measurements as well as topographic data to create a high spatial resolution AGBD map (~100 m) over Mexico (circa 2020). The remote sensing data includes Global Ecosystem Dynamic Investigation (GEDI) lidar, Sentinel 1 Synthetic-Aperture Radar (SAR), and Sentinel-2 multispectral imagery (MSI). GEDI onboard the International Space Station provides unprecedented forest structure and AGBD sampling datasets for model training and validation practices. Our analysis indicates that the developed random forest model can capture 63 % of the spatial variation (RMSE = 33.7 Mg/ha) of AGBD of Mexican forests. We find that shortwave infrared bands of Sentinel-2 MSI and topographical variables from elevation data are the most important variables in the developed AGBD model. Our study highlights methodological opportunities in synergistic uses of multiple sensors for large-scale forest AGBD mapping and shows potential for retrospective analysis and operational monitoring of forest AGBD and its dynamics.

Taejin Park↗
NASA NTRSDate not supplied

Mapping National Forest Aboveground Biomass in Mexico By Integrating GEDI and Landsat Times Series Data

Mexico is one of the countries with great potential for the UN's Reducing Emissions from Deforestation and Forest Degradation (REDD+) program, a key nature-based solution for the forest sector. To monitor carbon stock changes, there is a growing demand for unbiased Monitoring Reporting Verification (MRV) systems to facilitate effective forest management and climate change mitigation strategies. Remote sensing-based national aboveground biomass density (AGBD) estimation over Mexico is scarce and often limited to one-time static mapping, leading to spatiotemporal inconsistency in inputs. As an effort under NASA's Carbon Monitoring System (CMS) program, we have developed a remote sensing-based approach to create consistent historical AGBD maps of Mexico using multi-stream remote sensing data, including spaceborne lidar GEDI and long-term Landsat time series, as well as topographic information. We employ the continuous change detection and classification (CCDC) algorithm for temporal modeling of Landsat surface reflectance, followed by the inference of forest AGBD using a random forest machine learning algorithm with the temporal information of land surface dynamics extracted by the CCDC as input. GEDI provides unprecedented forest structure and AGBD sampling datasets for model training and validation practices. In this presentation, we share the progress made in developing a spatially explicit mapping of historical AGBD changes associated with land surface changes and post-disturbance landscapes.

Taejin Park↗
DOE OSTI2023

Methods for Measuring Carbon Dioxide Uptake and Permanence: Review and Implications for Macroalgae Aquaculture

Carbon dioxide removal (CDR) is gaining recognition as a necessary action in addition to emissions reduction to prevent some of the worst effects of climate change. Macroalgae aquaculture has been identified as a potential CDR strategy and significant research investments have been made in this area. This article reviews current methods for monitoring carbon to assess the potential for application in the context of macroalgae aquaculture as a CDR strategy. In total, 382 papers were included in the review and categorized by carbon uptake methods, carbon permanence methods, and comprehensive frameworks for assessing carbon capture. While methods for measuring carbon uptake are well established, methods to assess the permanence of carbon in the natural life cycle of macroalgae and in products following harvest are lacking. To achieve the full benefit of macroalgae cultivation as a climate solution, monitoring, reporting, and verification standards and improved methods for assessing carbon uptake and permanence need to be developed.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Parts-Per-Million Carbonate Mineral Quantification with Thermogravimetric Analysis–Mass Spectrometry

Mitigating the deleterious effects of climate change requires the development and implementation of carbon capture and storage technologies. To expand the monitoring, verification, and reporting (MRV) capabilities of geologic carbon mineralization projects, we developed a thermogravimetric analysis–mass spectrometry (TGA–MS) methodology to enable quantification of <100 ppm calcite (CaCO 3 ) in complex samples. We extended TGA–MS calcite calibration curves to enable a higher measurement resolution and lower limits of quantification for evolved CO 2 from a calcite–corundum mixture. We demonstrated <100 ppm carbonate mineral quantification with TGA–MS for the first time, an outcome applicable across earth, environmental, and materials science fields. We applied this carbonate quantification method to a suite of Columbia River Basalt Group (CRBG) well cuttings recovered in 2009 from Pacific Northwest National Laboratory’s Wallula #1 Well. Our execution of this new combined calcite and calcite–corundum calibration curve TGA–MS method on our CRBG sample suite indicated average carbonate contents of 0.050 wt % in flow interiors (caprocks) and 0.400 wt % in interflow zones (reservoirs) in the upper 1250 m of the Wallula #1 Well. Finally, by advancing our knowledge of continental flood basalt-hosted carbonates in the mafic subsurface and reaching new TGA–MS quantification limits for carbonate minerals, we expand MRV capabilities and support the commercial-scale deployment of carbon mineralization projects in the Pacific Northwest United States and beyond.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRSDate not supplied

From CMS to the U.S. Greenhouse Gas Center – Improved Tracking of Recent Changes in Co 2 and Ch 4 From NASA’s Quasi-Operational Modeling Systems

Reliable, low latency delivery of high quality global flux and concentration information is a growing but still unmet need to advance expanding measurement, monitoring, reporting, and verification efforts that underpin federal climate mitigation strategies. Here we present on progress toward developing space-based greenhouse gas (GHG) monitoring systems that can provide comprehensive information trailing real time by a matter of weeks to a few months. Through support from its Carbon Monitoring System (CMS) program, NASA has developed the capability to assimilate XCO 2 retrievals from the Orbiting Carbon Observatory, 2 (OCO 2 ) into the Goddard Earth Observing System (GEOS) Constituent Data Assimilation System (CoDAS) to create gap-filled, three-dimensional (3D) estimates of CO 2 mixing ratio. When observations are unavailable, concentration fields are further informed by observationally-informed bottom-up flux packages that incorporate remotely sensed fire, nighttime lights, and vegetation observations combined with estimates of atmospheric growth rate based on surface in situ data. The 3D nature of these datasets supports evaluation with independent aircraft data to improve confidence in satellite data, development of new regional modeling approaches, and quantification of the climate impacts of GHGs. The system has recently been expanded to assimilate XCH 4 from ESA’s TROPOspheric Monitoring Instrument (TROPOMI) instrument and is supported by companion efforts to improve delivery of estimates of bottom-up land and ocean fluxes. The quasi-operational GEOS-GHG system is contributing to the recently announced U.S. Greenhouse Gas Center (GHG Center) by delivering information on recent changes in CO 2 and CH 4 emissions and concentrations to support stakeholder and research communities. In this presentation, we provide an overview of the current system configured to support the GHG Center. We highlight examples of how this data contributes to broader NASA initiatives including the Earth Information Center, an innovative virtual and physical exhibit designed to show how NASA data helps the nation combat climate change. We conclude by discussing how innovations in CMS research can address remaining data gaps and modeling challenges to advance operational GHG monitoring in the future.

Lesley Ott↗
DOE OSTI2024

The Science, Engineering, and Validation of Marine Carbon Dioxide Removal and Storage

Scenarios to stabilize global climate and meet international climate agreements require rapid reductions in human carbon dioxide (CO 2 ) emissions, often augmented by substantial carbon dioxide removal (CDR) from the atmosphere. While some ocean-based removal techniques show potential promise as part of a broader CDR and decarbonization portfolio, no marine approach is ready yet for deployment at scale because of gaps in both scientific and engineering knowledge. Marine CDR spans a wide range of biotic and abiotic methods, with both common and technique-specific limitations. Further targeted research is needed on CDR efficacy, permanence, and additionality as well as on robust validation methods—measurement, monitoring, reporting, and verification—that are essential to demonstrate the safe removal and long-term storage of CO 2 . Engineering studies are needed on constraints including scalability, costs, resource inputs, energy demands, and technical readiness. Research on possible co-benefits, ocean acidification effects, environmental and social impacts, and governance is also required.

climate mitigation↗
DOE OSTI2025

Assessing the limitations of commercial sensors and models for supporting marine carbon dioxide removal monitoring: a case study

Several unknowns remain surrounding marine Carbon Dioxide Removal (mCDR) monitoring, reporting, and verification (MRV) practices and capabilities. Current in-situ sensor technology is limited (primarily pH and pCO 2 ), requiring calculations and assumptions to estimate changes in carbonate chemistry parameters, including total alkalinity (TA). Considering that cost, energy consumption, and accuracy of commercial sensors can vary by orders of magnitude, understanding how well existing sensors perform in an mCDR context is important for this emerging community. Likewise, documenting sensor limitations and how relatively simple models can optimize sensor deployments will improve MRV efforts and support protocol development. Here we (1) compare performance a variety of commercially available sensors in a blind mesocosm experiment simulating ocean alkalinity enhancement (OAE), and how sensor performance impacted carbonate chemistry estimates; (2) evaluate if sensors can distinguish the OAE signal from natural variability during a small scale OAE field test in Sequim Bay, WA, USA, and (3) use an idealized ocean biogeochemistry model to explore optimal sensor network design based on (1) and (2). Our mesocosm results indicate that correctly constraining pH uncertainty will be critical for accurate TA estimates with current sensor technology compared to the less impactful variation caused by uncertainty in pCO 2 (pH data that are presented throughout are reported on the total scale (pH T ) unless otherwise noted). Our pilot field test demonstrated that sensors were capable of distinguishing mCDR signatures from natural variability under optimal real-world conditions. Idealized modeling simulations of the field test showed that a range of sparse and dense (3 to 100) sensors sampling areas of detectable increases will underestimate the net change in surface pH by at least 35–55%, at both realistic and highly elevated alkalinity input levels. We also highlight the limitations of current sensing technology for MRV, and the importance of ocean biogeochemistry models as critical tools for predicting when and where mCDR signals will be detectable using available sensors. Overall, our findings suggest that commercially available pCO 2 sensors and some pH sensors will form an important backbone for mCDR MRV tasks, though complete MRV characterization will require these data to be used in combination with other tools.

OAE↗
NASA NTRS1978

Urine monitoring system failure analysis and operational verification test report

Failure analysis and testing of a prototype urine monitoring system (UMS) are reported. System performance was characterized by a regression formula developed from volume measurement test data. When the volume measurement test data. When the volume measurement data was imputted to the formula, the standard error of the estimate calculated using the regression formula was found to be within 1.524% of the mean of the mass of the input. System repeatability was found to be somewhat dependent upon the residual volume of the system and the evaporation of fluid from the separator. The evaporation rate was determined to be approximately 1cc/minute. The residual volume in the UMS was determined by measuring the concentration of LiCl in the flush water. Observed results indicated residual levels in the range of 9-10ml, however, results obtained during the flushing efficiency test indicated a residual level of approximately 20ml. It is recommended that the phase separator pumpout time be extended or the design modified to minimize the residual level.

Glanfield, E. J.↗
DOE OSTI2022

The NASA Carbon Monitoring System Phase 2 synthesis: scope, findings, gaps and recommended next steps

Abstract Underlying policy efforts to address global climate change is the scientific need to develop the methods to accurately measure and model carbon stocks and fluxes across the wide range of spatial and temporal scales in the Earth system. Initiated in 2010, the NASA Carbon Monitoring System is one of the most ambitious relevant science initiatives to date, exploiting the satellite remote sensing resources, computational capabilities, scientific knowledge, airborne science capabilities, and end-to-end system expertise that are major strengths of the NASA Earth Science program. Here we provide a synthesis of ‘Phase 2’ activities (2011–2019), encompassing 79 projects, 482 publications, and 136 data products. Our synthesis addresses four key questions: What has been attempted? What major results have been obtained? What major gaps and uncertainties remain? and What are the recommended next steps? Through this review, we take stock of what has been accomplished and identify future priorities toward meeting the nation’s needs for carbon monitoring reporting and verification.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

A multi model ensemble reveals net climate benefits from regenerative practices in US Midwest croplands

Process-based cropping systems models (CSMs) are key components of measurement, monitoring, reporting, and verification frameworks of carbon markets, but model-specific differences limit their applicability across diverse pedo-climatic conditions and agronomic practices. Multi-model ensemble (MME) provides an opportunity to better estimate changes in soil organic carbon (SOC) and nitrous oxide (N 2 O) emissions from agronomic practices at scale. We used an MME across 46 million hectares of US Midwest cropland at a resolution of 4-km 2 to assess the aggregate ability of different regenerative practices to sequester SOC and N 2 O emissions compared to their counterfactual dynamic baselines. MME was validated against long-term trials and compared to its constituent CSMs, showing greater accuracy and lower uncertainty. The results show that adopting no-till combined with cover crops increased SOC stocks by 0.36 ± 0.12 Mg ha -1 yr -1 , corresponding to a net regional SOC gain of 16.4 Tg C yr -1 compared to business-as-usual baselines. These benefits are halved when each management is practiced individually, and the SOC gains are only fully realized with low initial carbon stock. By including N 2 O emissions, we can assess the overall climate mitigation potential, specifically, the extent to which carbon sequestration can offset direct N 2 O emissions. The magnitude of this potential varies depending on management practices and geographic location with net climate benefits on average ranging from 0 to 3 Mg CO 2 -eq ha -1 yr -1 . High-resolution MME results allow for robust estimates of climate mitigation, reducing barriers to carbon market participation and supporting regenerative agriculture initiatives at scale.

carbon credits↗
DOE OSTI2026

Linking Plant and Microbial Traits to Soil Carbon for Reliable and Resilient Bioenergy Systems

Bioenergy systems in the United States offer a dual opportunity to supply renewable feedstocks while enhancing ecosystem services such as hydrologic regulation, erosion control, and soil carbon (C) storage. National assessments highlight the potential to grow perennial energy crops to improve soil function and ecosystem resilience. Realizing this potential requires understanding the ecological mechanisms that govern how C is added, transformed, and stabilized in soils. Plant traits determine the quantity, depth, and chemistry of organic inputs, while microbial processes—including carbon use efficiency, necromass formation, and trophic interactions—mediate their transformation and partitioning among soil carbon pools. These biological pathways are shaped by soil physical and chemical properties, including aggregation, texture, and mineralogy, and by environmental drivers such as temperature, moisture, and disturbance, leading to context-dependent outcomes across landscapes. Management practices that diversify feedstocks, minimize disturbance, and maintain soil cover can promote both biomass production and C retention, while microbial amendments and rhizosphere engineering offer emerging, but often context-dependent, tools to optimize plant–microbe interactions. Trade-offs between biomass yield and soil carbon storage may arise when systems favor rapid aboveground productivity at the expense of belowground inputs and microbial processing, underscoring the importance of trait combinations that support both functions. Advances in monitoring, reporting, and verification—spanning precision agriculture, remote sensing, and biosensing—are improving predictive capacity through microbial-explicit process models and model–experiment (ModEx) frameworks. By connecting soil, plant, and microbial processes with advances in modeling and biosensing, this review outlines research priorities focused on trait-based parameterization and ModEx integration. These priorities will support the design of bioenergy systems that are both reliable and resilient, enhancing renewable energy production and ecosystem sustainability.

bioenergy systems↗
DOE OSTI2023

mCDR and carbon sequestration in various macroalgae products (FY22 Seedling Report)

Marine approaches to CDR (mCDR) are gaining recognition and substantial funding in the United States. Macroalgae farming has been identified by several highly recognized organizations as a potential carbon capture strategy, and significant research investments have been made in this area. However, much of the existing literature on the potential of macroalgae cultivation and product development as an mCDR strategy has not adequately considered the permanence of carbon captured, due to the status of the industry. Pacific Northwest National Laboratory (PNNL) has been interested in exploring the potential connections between macroalgae farming, mCDR, and marine energy. In October 2021, PNNL conducted a literature review of life cycle analyses (LCAs) from macroalgae products to assess the carbon capture potential and permanence. This project leverages the previous work done based on LCA for carbon sequestration and permanence in macroalgae and expands it to include additional approaches to monitoring, reporting, and verification (MRV), and opportunities for marine energy. This report provides a collection of the findings throughout this FY22 Seedling for the U.S. Department of Energy’s Water Power Technology Office, structured by the following tasks as defined by the initial proposal: Task 1: Update rankings of macroalgae products based on expanded literature review of carbon sequestration and value of temporary storage. Task 2: Assess potential changes to net climate impacts measured in LCAs of kelp products if marine energy was integrated in processing / harvesting. Task 3: Develop recommendations for standardized assessment of carbon capture potential of biological products and define data collection requirements.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

NORTH DAKOTA CARBONSAFE PHASE III: SITE CHARACTERIZATION AND PERMITTING OF GEOLOGIC STORAGE OF CARBON DIOXIDE

The Energy & Environmental Research Center (EERC), in partnership with Minnkota Power Cooperative Inc. (Minnkota), SLB, and Computer Modelling Group Ltd. (CMG), supported wide-scale deployment of carbon capture and storage (CCS) as part of the U.S. Department of Energy (DOE) National Energy Technology Laboratory Carbon Storage Assurance Facility Enterprise (CarbonSAFE) Initiative Phase III. This phase included the acquisition, analysis, and development of information to fully characterize two storage complexes to demonstrate viable storage resources for commercial volumes of CO2 (defined by DOE as a minimum of 50 million tonnes [MMt] of CO2 within a 30-year period) (National Energy Technology Laboratory, 2024). Phase III also involved the preparation, submission, and approval of North Dakota underground injection control (UIC) Class VI storage facility permits (SFPs)—required precursors to applications for Class VI injection well permits. The presumed viability of commercial-scale CCS, situated adjacent to Minnkota’s Milton R. Young Station (MRYS), is validated by Minnkota’s continued pursuit of Project Tundra—an initiative to build the world’s largest lignite-based CCS project in central North Dakota (www.projecttundrand.com). Project Tundra comprises two scopes of work, Tundra Capture (installation of postcombustion CO2 capture at MRYS) and Tundra SGS (secure geologic storage). The efforts of North Dakota CarbonSAFE Phase III, Site Characterization and Permitting, supported Tundra SGS. Extensive site-specific characterization activities included a successful multimeasurement geophysical approach and drilling a stratigraphic test well (J-ROC 1, subsequently renamed Liberty-1) adjacent to MRYS. Core collection and analyses, downhole testing and fluid sampling, and geophysical logging were performed on J-ROC 1 and on a nearby stratigraphic test well (known as J-LOC 1), which was drilled, cored, and tested under a complementary project funded by the North Dakota Lignite Research Program. The injection tests performed on J-LOC 1 positively impacted the CarbonSAFE project, resulting in fewer proposed injection wells and significant construction, operations, and monitoring cost savings. The characterization data collected and analyses performed were integrated into geologic models, and successive numerical simulations were run to determine CO2 plume extent and subsurface pressure buildup associated with the planned CO2 injection rate of nearly 4 MMt per year. The latter doubles the CarbonSAFE Initiative goal with an estimated 100 MMt of CO2 stored in 20 years. Application of the U.S. Environmental Protection Agency’s (EPA’s) method for estimating the Class VI Rule area of review (AOR) to the overpressurized Broom Creek Formation inspired an alternative method of calculation, called risk-based AOR delineation. This peer-reviewed method was applied for the first time during the storage facility-permitting process. The two SFP applications submitted in 2021 successfully resulted in North Dakota Industrial Commission (NDIC) orders in 2022 authorizing the creation of the storage facility areas and amalgamation of pore space as well as establishing financial responsibility requirements. After approval of the SFPs, Minnkota filed in 2022 applications for permits to reenter the J-ROC 1 well and to drill two new wells—all with the intended purpose to become Class VI injection wells. To establish eligibility under the Internal Revenue Code for Section 45Q tax incentives, a monitoring, reporting, and verification (MRV) plan was prepared and submitted by Minnkota to EPA in 2022, resulting in the first such plan approved in North Dakota. Also in 2022, under the National Environmental Policy Act (NEPA), Minnkota prepared and submitted an environmental information volume (EIV) describing the proposed CCS project and associated potential environmental impacts. Based on the EIV, DOE determined that the proposed construction project required an environmental assessment, and Minnkota submitted the first draft in 2023 and a revised draft in 2024. Both submissions were followed by a public comment period. Subsequently, DOE issued a finding of no significant impact (FONSI) on September 13, 2024. A successful outreach program, strongly based in the production, presentation, and dissemination of informational material, fostered an environment to aid stakeholders in making informed decisions regarding the planned project. Opportunities for public input were provided at various steps along the way, including at county planning and zoning meetings, before and during the SFP administrative hearing, and during environmental assessment public comment periods. In addition, land/pore space owners and mineral owners had various points of contact, including granting access rights, securing pore space leasing, and mineral owner notifications. Based upon the successful storage facility permitting issued by NDIC, approval of the MRV plan by EPA, and receipt of a FONSI under the NEPA, Minnkota is continuing its pursuit of Project Tundra. In December 2023, the Office of Clean Energy Demonstrations under its Carbon Capture Demonstrations Projects Program announced funding for the capture system (Office of Clean Energy Demonstrations, 2023) and a proposal for CarbonSAFE Phase IV: Construction funding was submitted in March 2024 for the storage project. A go/no-go decision to proceed with construction and operations in the Broom Creek Formation is anticipated in 2024. References National Energy Technology Laboratory, CarbonSafe Initiative, https://netl.doe.gov/carbon-management/carbon-storage/carbonsafe (accessed August 2024). Office of Clean Energy Demonstrations, 2023, OCED selects three projects in CA, ND, and TX to reduce harmful carbon pollution, create new economic opportunities, and advance carbon reducing technologies, December, www.energy.gov/oced/articles/oced-selects-three-projects-ca-nd-and-tx-reduce-harmful-carbon-pollution-create-new (accessed August 2024).

Peck, Wesley↗
DOE OSTI2025

Enhanced Weathering: Techno-Economic and Life Cycle Screening Analysis

This report presents a detailed, transparent, and independent screening level techno-economic analysis and lifecycle analysis of enhanced weathering of igneous rocks and industrial waste materials. The performance, costs, and CO 2 removal potential is reported for a process spanning material acquisition, preparation, transport, application and monitoring, reporting, and verification. The base cases examined serve as a reference for informative performance and cost sensitivity analyses. This approach aims to highlight promising scenarios for enhanced weathering application and potential avenues for cost reduction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗