Search NASA⌕ Search

SEARCH · Search NASA

Results for “mooring”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

High Frequency, Long Time Series Measurements from the Bermuda Testbed Mooring in Support of SIMBIOS

It has been recognized that optical moorings are important platforms for the validation of Sea-Viewing Wide Field-of-view Sensor (SeaWiFS). It was recommended that optical moorings be maintained in order to: (1) provide long-term time series comparisons between in situ and SeaWIFS measurements of normalized water-leaving radiance; (2) develop and test algorithms for pigment biomass and phytoplankton primary productivity; and (3) provide long-term, virtually continuous in situ observations which can be used to determine and optimize the accuracy of derived satellite products. These applications require the use of in situ radiometers for long periods of time to evaluate and correct for inherent satellite undersampling (aliasing and biasing) and degradation of satellite color sensors (e.g., drifts as experienced by the Coastal Zone Color Scanner). The Bermuda Testbed Mooring (BTM) program was initiated in 1994 at a site located about 80km southeast of Bermuda in waters of about 4530 m depth. In August 1997, with NASA's support, we started to provide the Sensor Intercomparison and Merger for Biological and Interdisciplinary Oceanic Studies (SIMBIOS) program with large volumes of high frequency, long-term time-series bio-optical data from the BTM for SeaWiFS satellite ocean color groundtruthing and algorithm development. This NASA supported portion of the BTM activity spanned three years and covered five BTM deployments. During these three years, the quality of radiometric data has improved dramatically. Excellent agreement between BTM moored data and both SeaWiFS and nearby ship profile radiometric data demonstrate that technical advances in the moored optical observations have reduced the major difficulties that moored platforms face: biofouling and less frequent calibration.

Dickey, Tommy↗

Update on TAO moored ORG array

During the Coupled Ocean Atmosphere Response Experiment (COARE) six TAO moorings were equipped with optical rain gauges (ORG's). In late 1993 moorings deployed on the equator at 154E and 157.5E were recovered and not redeployed as they were augmentations to the TAO array for COARE only. In December 1993, four TAO moorings were equipped with ORG's: one each at 2N, 156E and 2S, 156E and ORG doublets on the equator at 0, 156E and 0, 165E. The 2N, 156E mooring has been lost. By the end of April all sites will have been serviced and six refurbished sensors will again be deployed in the same locations.

Freitag, H. Paul↗

An in situ evaluation of TOPEX/Poseidon altimetric measurements versus meaurements made by moorings and inverted echo sounders for sea surface height

The classical method of observing the sea surface height has been to make shipboard measurements of the vertical - density profile, and then calculating the surface height relative to a deeper reference surface. Two methods (a moored vertical string of instruments and an inverted echo sounder) were subsequently developed to obtain longer time in situ measurements. The first of these can be thought of as an extension of the discrete bottle hydrocast while the second integrates acoustically over the water column. One purpose of this note is to compare the result when coincidental observations are made by these two methods. This was done at two sites in the western tropical Pacific. Two inverted echo sounders were deployed alongside two enhanced TOGA-COARE moorings to be used in an in situ evaluation of TOPEX/Poseidon altimetric measurements of sea surface height. The mooring and inverted echo sounder data reproduced one another, at low frequency, with a correlation of 0.93 and 0.95 and the altimeter correlated with each of the above values ranging from 0.84 to 0.94. It is concluded that the altimetric measurements are statistically equivalent to the in situ measurements in the area of study.

Source record↗

Phytoplankton production in the Sargasso Sea as determined using optical mooring data

Optical measurements from an untended mooring provide high-frequency observations of in-water optical properties and permit the estimation of important biological parameters continuously as a function of time. A 9-month time series, composed of three separate deployments, of optical data from the BIOWATT 1987 deep-sea mooring located in the oligotrophic waters of the Sargasso Sea at 34 deg N, 70 deg W are presented. These data have been tested using several bio-optical models for the purpose of providing a continuous estimate of phytoplankton productivity. The data are discussed in the context of contemporaneous shipboard observations and for future ocean color satellite observations. We present a continuous estimation of phytoplankton productivity for the 9-month time series. Results from the first 70-day deployment are emphasized to demonstrate the utility of optical observations as proxy measures of biological parameters, to present preliminary analysis, and to compare our bio-optical observations with concurrent physical observations. The bio-optical features show variation in response to physical forcings including diel variations of incident solar irradiance, episodic changes corresponding to wind forcing, variability caused by advective mesoscale eddy events in the vicinity of the mooring, and seasonal variability corresponding to changes in solar radiation, shoaling of the mixed layer depth, and succession of phytoplankton populations.

Waters, K. J.↗

Mooring airships

The purpose of this paper is to summarize the present status of the problem of mooring airships. Mooring with one, two and even three cables are all discussed.

HANGERS, LAUNCHING & LANDING DEVICES↗

Mooring and ground handling rigid airships

The problems of mooring and ground handling rigid airships are discussed. A brief history of Mooring and Ground Handling Rigid Airships from July 2, 1900 through September 1, 1939 is included. Also a brief history of ground handling developments with large U. S. Navy nonrigid airships between September 1, 1939 and August 31, 1962 is included wherein developed equipment and techniques appear applicable to future large rigid airships. Finally recommendations are made pertaining to equipment and procedures which appear desirable and feasible for future rigid airship programs.

Walker, H., Jr.↗

Two-year moored instrument results along 152 deg E

Results from a 2-year (nominal) deployment of a moored array along 152 deg E from 28 deg N to 41 deg N are presented, with emphasis on similarities and differences between settings (approximately year-to-year). Ten moorings and 38 instruments were involved, from the fall of 1980 to 1982. Current-temperature meters spanned the water column from 500- to 4000-m depths, with occasional instruments in the vicinity of 300 m and near the bottom (about 6000 m). Upper level features located in the center of the array near 35-36 deg N were generally stable relative to the axis of the Kuroshio Extension, varying from deployment to deployment with meanders in this flow regime. Some properties of the abyssal (about 4000 m) currents were comparatively more variable, with these changes not connected to meandering of the Kuroshio Extension in an obvious way. The vertical structure and frequency distributions of eddy kinetic energy were similar in shape and to some extent in amplitude from deployment to deployment, especially relative to meanders of the Kuroshio Extension, but translated in the opposite direction.

Schmitz, William J., Jr.↗

Optical variability and pigment biomass in the Sargasso Sea as determined using deep-sea optical mooring data

A 9-month time series of optical data, composed of three separate deployments, from the Biowatt 1987 deep-sea mooring located in the oligotrophic waters of the Sargasso Sea at 32 deg N, 70 deg W, is presented. These data were analyzed using several biooptical models for the purpose of providing a continuous estimate of the spectral diffuse attenuation coefficient and pigment biomass. Results of the first 70-day deployment demonstrate the utility of optical observations as proxy measures of biological parameters, and facilitate a preliminary analysis of the temporal variations and a comparison of the present biooptical observations with concurrent physical observations. Biooptical properties exhibit variation in response to physical forcings, such as diel variations of incident solar irradiance, episodic wind forcing, advective mesoscale eddy layer depth, and succession of phytoplankton. The mooring data are discussed in the context of contemporaneous shipboard observations as well as in terms of future ocean satellite observations.

Smith, R. C.↗

Verifying the interactive convergence clock synchronization algorithm using the Boyer-Moore theorem prover

The application of formal methods to the analysis of computing systems promises to provide higher and higher levels of assurance as the sophistication of our tools and techniques increases. Improvements in tools and techniques come about as we pit the current state of the art against new and challenging problems. A promising area for the application of formal methods is in real-time and distributed computing. Some of the algorithms in this area are both subtle and important. In response to this challenge and as part of an ongoing attempt to verify an implementation of the Interactive Convergence Clock Synchronization Algorithm (ICCSA), we decided to undertake a proof of the correctness of the algorithm using the Boyer-Moore theorem prover. This paper describes our approach to proving the ICCSA using the Boyer-Moore prover.

Young, William D.↗

Development of moored oceanographic spectroradiometer

Biospherical Instruments has successfully completed a NASA sponsored SBIR (Small Business Innovational Research Program) project to develop spectroradiometers capable of being deployed in the ocean for long periods of time. The completion of this project adds a valuable tool for the calibration of future spaceborne ocean color sensors and enables oceanographers to extend remote sensing optical techniques beyond the intermittent coverage of spaceborne sensors. Highlights of the project include two moorings totalling 8 months generating extensive sets of optical, biological, and physical data sets in the ocean off La Jolla, California, and a 70 day operational deployment of the resulting commercial product by the ONR and NASA sponsored BIOWATT program. Based on experience gained in these moorings, Biospherical Instruments has developed a new line of spectroradiometers designed to support the oceanographic remote sensing missions of NASA, the Navy, and various oceanographers.

Booth, Charles R.↗

A Total Lightning Perspective of the 20 May 2013 Moore, Oklahoma Supercell

In the early afternoon of 20 May 2013, a storm initiated to the west‐southwest of Newcastle, Oklahoma. This storm would rapidly intensify into the parent supercell of the tornado that struck the city of Moore, Oklahoma. This article describes what contributions total lightning observations from the Oklahoma Lightning Mapping Array could provide to operational forecasters had these observations been available in real‐time. This effort includes a focus on the GOES‐R pseudo‐geostationary lightning mapper demonstration product as well as the NASA SPoRT / Meteorological Development Laboratory's total lightning tracking tool. These observations and tools identified several contributions. Two distinct lightning jumps at 1908 and 1928 UTC provided a lead time of 19 minutes ahead of severe hail and 26 minutes ahead of the Moore, Oklahoma tornado's touchdown. These observations provide strong situational awareness to forecasters, as the lightning jumps are related to the rapid strengthening of the storm's updraft and mesocyclone and serve as a precursor to the stretching of the storm vortex ahead severe weather.

Stano, Geoffrey T.↗

Enabling More than Moore: Accelerated Reliability Testing and Risk Analysis for Advanced Electronics Packaging

For five decades, the semiconductor industry has distinguished itself by the rapid pace of improvement in miniaturization of electronics products-Moore's Law. Now, scaling hits a brick wall, a paradigm shift. The industry roadmaps recognized the scaling limitation and project that packaging technologies will meet further miniaturization needs or ak.a "More than Moore". This paper presents packaging technology trends and accelerated reliability testing methods currently being practiced. Then, it presents industry status on key advanced electronic packages, factors affecting accelerated solder joint reliability of area array packages, and IPC/JEDEC/Mil specifications for characterizations of assemblies under accelerated thermal and mechanical loading. Finally, it presents an examples demonstrating how Accelerated Testing and Analysis have been effectively employed in the development of complex spacecraft thereby reducing risk. Quantitative assessments necessarily involve the mathematics of probability and statistics. In addition, accelerated tests need to be designed which consider the desired risk posture and schedule for particular project. Such assessments relieve risks without imposing additional costs. and constraints that are not value added for a particular mission. Furthermore, in the course of development of complex systems, variances and defects will inevitably present themselves and require a decision concerning their disposition, necessitating quantitative assessments. In summary, this paper presents a comprehensive view point, from technology to systems, including the benefits and impact of accelerated testing in offsetting risk.

Ghaffarian, Reza↗

Channel capacity of Moore automata.

Algorithm for calculating Moore automaton or connected network channel capacity and source of input symbols for full capacity utilization

Conant, R. C.↗

A new concept for airship mooring and ground handling

Calculations were made to determine the feasibility of applying the negative air cushion (NAC) principle to the mooring of airships. Pressures required for the inflation of the flexible trunks are not excessive and the maintenance of sufficient hold down force is possible in winds up to 50 knots. Fabric strength requirements for a typical NAC sized for a 10-million cubic foot airship were found to be approximately 200 lbs./in. Corresponding power requirements range between 66-HP and 5600-HP. No consideration was given to the internal airship loads caused by the use of a NAC and further analysis in much greater detail is required before this method could be applied to an actual design, however, the basic concept appears to be sound and no problem areas of a fundamental nature are apparent.

Vaughan, J. C.↗

Modification of Moore measuring machine/Leitz microscope

Quality assurance mechanical inspection, anticipating the need for improved measuring techniques for the various laboratory programs, has perfected a modification of the Leitz microscope for the Moore measuring machine that has the capability of significantly reducing inspection time with increased reliability.

Greth, H. A.↗

Nuclear track studies of the Pasamonte and Moore County eucrites

The selective annealing technique was applied to samples from the Pasamonte eucrite with a view to obtaining fission track ages of clasts in the meteorite. The method did not permit cosmic ray tracks to be distinguished from fission tracks in either Pasamonte or Moore County. A difference between the fossil track densities observed in an igneous clast and the surrounding host material appears to be due to a pre-irradiation on the Pasamonte parent planet.

Wilkening, L. L.↗