Search NASA⌕ Search

SEARCH · Search NASA

Results for “morphology evolution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Morphological evolution of X-ray flare structures from the rise through the decay phase

The morphological evolution of 12 solar X-ray subflares from onset through the decay phase has been studied using photographic X-ray images obtained from Skylab. The spatial configurations are found to vary widely from flare to flare, but they appear to be composed of two basic kinds of structures. The first, termed 'X-ray kernels', are brightest during the rise phase; the second, looplike structures, appear during the maximum and decay phases of the event. The X-ray kernels are small pointlike structures which may be related to the nonthermal phases of flares.

Kahler, S. W.↗
NASA NTRS2002

Morphological Evolution and Weak Interface Development within CVD-Zirconia Coating Deposited on Hi-Nicalon Fiber

The phase contents and morphology of a ZrO2 fiber coating deposited at 1050 C on Hi-Nicalon(Tm) by chemical vapor deposition were examined as a function of deposition time from 5 to 120 min. The morphological evolution in the ZrO2 coating was correlated to the development of delamination within the ZrO2 coating. The delamination appears to occur as a result of: (1) continuous formation of tetragonal ZrO2 nuclei on the deposition surface; (2) martensitic transformation of the tetragonal phase to a monoclinic phase upon reaching a critical grain size; and (3) development of significant compressive hoop stresses due to the volume dilation associated with the transformation. Our observations suggest that it will be of critical importance to further understand and eventually control the nucleation and grain growth behavior of CVD ZrO2 and its phase transformation behavior for its potential applications for composites.

Li, Hao↗
NASA NTRS2017

Solidification and Morphological Evolution of Al-Si Eutectics in Convector-Diffusive Conditions

The Al-Si material system is an important and has been studied for over half century with a focus on industrial applications in high strength and high conductivity alloys. A great deal of researches have been focused on controlling the morphology and hence performance through the addition of small impurities and by processing conditions. Most of the structure-property correlations are based on the post solidified micromorphology and growth conditions. This material system is unique and has been explored for heat spreader, controlling coefficient of expansion by adjusting composition of silicon and in designing composites. The Al-Si system is very interesting system for understanding the dendritic (Al-rich side) eutectic transition. Recently this system has been of great interest because of its applications in designing heat spreader, low temperature flux to grow SiC large substrates and in controlling the coefficient of expansion of Al-based alloys. We have performed extensive experiments to understand eutectic transition and to understand the morphological evolution in presence of impurities. We will discuss the results of dendritic transition into faceted long grains in convector-diffusive conditions. In this presentation we will present morphological transition in presence of carbon impurity and development of novel morphology.

Singh, N. B.↗
NASA NTRS1999

A Real Time Investigation of Morphological Evolution During Solidification of Different Alloy Systems

Solidification phenomenon which occur at the solid/liquid (s/I) interface play a major role in the determination of structure and hence the technologically important properties of a casting. However, metals being opaque, conclusions related to several important phenomenon such as boundary layer thickness, morphological evolution, and eutectic and cell spacing are deduced from quenching experiments and subsequent post solidification metallographic analysis. Consequently, limited information is obtained about the dynamics of the process. This paper will discuss the recent efforts at the Space Science Laboratory, NASA Marshall Space Flight Center, to view and quantify in-situ and in real time the dynamics of the solidification process and to measure interfacial undercooling. First, a high resolution x-ray transmission microscope (XTM) has been developed to monitor fundamental interfacial phenomena during directional solidification of metals and alloys. The XTM operates in the range of 10-100 KeV and through projection is capable of achieving magnification of up to 16OX. Secondly, an innovative collapsible furnace has been designed to quantify interfacial undercooling by measuring the temperature of a moving s/I interface in reference to a fixed s/l interface. This measurement technique is non-intrusive in nature and is based on the Seebeck principle. In this paper real time results obtained to characterize the dynamics of irregular eutectic spacing will be presented. As an example fiber to lamella or plate transition in the Al-Al2Au eutectic system will be discussed. Further, a resolution limit of 25 micron has permitted viewing in real time morphological instability and cellular growth in Al-Au and Al-Ag systems. Simultaneously, a systematic investigation has been carried out to measure interfacial undercooling for Pb-1 wt.% Sn at and near the marginal stability regime. In conjunction with the XTM observations this study attempts to validate existing relationships between undercooling and growth velocity during plane front growth, marginal stability regime, and stable cellular growth.

Sen, S.↗
NASA NTRS2005

Morphological Evolution of Directional Solidification Interfaces in Microgravity: An Analysis of Model Experiments Performed on the International Space Station

A series of experiments performed using the Pore Formation and Mobility Investigation (PFMI) apparatus within the glovebox facility (GBX) on board the International Space Station (ISS) has provided video images of the morphological evolution of a three-dimensional interface in a diffusion controlled regime. The experimental samples were prepared on ground by filling glass tubes, 1 cm ID and approximately 30 cm in length, with "alloys" of succinonitrile (SCN) and water in an atmosphere of nitrogen at 450 millibar pressure. The compositions of the samples processed and analyzed are 0.25,0.5 and 1.0 wt% water. Experimental processing parameters of temperature gradient and translation speed, as well as camera settings, were remotely monitored and manipulated from the ground Telescience Center (TSC) at the Marshall !3pace Flight Center. During the experiments, the sample was first subjected to a unidirectional melt back, generally at 10 microns per second, with a constant temperature gradient ahead of the melting interface. Following the melt back, the interface was allowed to stabilize before translation is initiated. The temperatures in the sample were monitored by six in situ thermocouples and the position is monitored by an optical linear encoder. For the experiments performed and analyzed, the gradients ranged from 2.5 - 3.3 K/mm and the initial pulling velocities ranged from 0.7 micron per second to 1 micron per second with subsequent transition velocities of up to 100 microns per second. The data provided by the PFMI for analysis includes near-real-time (NRT) video captured on the ground during the experiment runs, ISS Video Tape Recorder (VTR) data dumped from the VTR at the end of the experiment run and recorded on the ground, telemetry data including temperature and position measurements, and limited flight HI-8 tapes in 2 camera views of experiment runs for which tapes have been returned to the investigators from ISS. Because of limited down mass from the ISS, the majority of the initial analysis has been performed using the NRT and VTR video data but will be supplemented with the HI-8 video as it becomes available. hardware and procedures required to prepare samples for correlation to flight samples is described. Using this ground-based system, a series of experiments have been performed for direct comparison with the flight data. The results of these comparisons as well as implications to future microgravity experiments are presented and discussed. A ground-based thin-sample directional solidification system as well as all associated

Strutzenberg, Louise L.↗
NASA NTRS1985

Morphologic Evolution of the Mount St. Helens Crater Area, Washington

The large rockslide-avalanche that preceded the eruption of Mount St. Helens on 18 May 1980 removed approximately 2.8 cubic km of material from the summit and north flank of the volcano, forming a horseshoe-shaped crater 2.0 km wide and 3.9 km long. A variety of erosional and depositional processes, notably mass wasting and gully development, acted to modify the topographic configuration of the crater area. To document this morphologic evolution, a series of annual large-scale topographic maps is being produced as a base for comparitive geomorphic analysis. Four topographic maps of the Mount St. Helens crater area at a scale of 1:4000 were produced by the National Mapping Division of the U. S. Geological Survey. Stereo aerial photography for the maps was obtained on 23 October 1980, 10 September 1981, 1 September 1982, and 17 August 1983. To quantify topographic changes in the study area, each topographic map is being digitized and corresponding X, Y, and Z values from successive maps are being computer-compared.

Beach, G. L.↗
NASA NTRS1988

Morphological evolution of growing crystals - A Monte Carlo simulation

The combined effects of nutrient diffusion and surface kinetics on the crystal morphology were investigated using a Monte Carlo model to simulate the evolving morphology of a crystal growing from a two-component gaseous nutrient phase. The model combines nutrient diffusion, based on a modified diffusion-limited aggregation process, with anisotropic surface-attachment kinetics and surface diffusion. A variety of conditions, ranging from kinetic-controlled to diffusion-controlled growth, were examined. Successive transitions from compact faceted (dominant surface kinetics) to open dendritic morphologies (dominant volume diffusion) were obtained.

Xiao, Rong-Fu↗
NASA NTRS1993

Tectonic controls on rift basin morphology: Evolution of the northern Malawi (Nyasa) rift

Radiometric (K-Ar and Ar-40/Ar-39) age determinations of volcanic and volcaniclastic rocks, combined with structural, gravity, and seismic reflection data, are used to constrain the age of sedimentary strata contained within the seismically and volcanically active northern Malawi (Nyasa) rift and to characterize changes in basin and flank morphologies with time. Faulting and volcanism within the Tukuyu-Karonga basin began at approximately 8.6 Ma, when sediments were deposited in abroad, initially asymmetric lake basin bounded on its northeastern side by a border fault system with minor topographic relief. Extensions, primarily by a slip along the border fault, and subsequent regional isostatic compensation led to the development of a 5-km-deep basin bounded by broad uplifted flanks. Along the low-relief basin margin opposite border fault, younger stratigraphic sequences commonly onlap older wedge-shaped sequences, although their internal geometry is often progradational. Intrabasinal faulting, flankuplift, and basaltic and felsic volcanism from centers at the northern end of the basin became more important at about 2.5 Ma when cross-rift transfer faults developed to link the Tukuyu-Karonga basin to the Rukwa basin. Local uplift and volcanic construction at the northern end of the basin led to a southeastward shift in the basin's depocenter. Sequence boundaries are commonly erosional along this low-relief (hanging wall) margin and conformable in the deep lake basin. The geometry of stratigraphic sequences and the distribution of the erosion indicate that horizontal and vertical crustal movements both across and along the length of the rift basin led to changes in levels of the lake, irrespective of paleoclimatic fluctuations.

Ebinger, C. J.↗
NASA NTRS1992

An interface tracking method applied to morphological evolution during phase change

The focus of this work is the numerical simulation of interface motion during solidification of pure materials. First, the applicability of the oft-used quasi-stationary approximation for interface motion is assessed. It is seen that such an approximation results in poor accuracy for nontrivial Stefan numbers. Solution of the full set of equations including grid movement terms yields close agreement with analytical results. Next, a generic interface tracking procedure is designed, which overcomes restrictions of single-valuedness of the interface imposed by commonly used mapping methods. This method incorporates with ease interface phenomena involving curvature, which assume importance at the smaller scales of a deformed interface. The method is then applied to study the development of a morphologically unstable phase interface. The issue of appropriate scaling has been addressed. The Gibbs-Thomson effect for curved interfaces has been included. The evolution of the interface, with the competing mechanisms of undercooling and surface tension is found to culminate in tip-splitting, cusp formation and persistent cellular development.

Shyy, W.↗
NASA NTRSDate not supplied

Morphological evolution and transition at nanoscale in BSTO ceramic materials

Considerable efforts have been devoted for the development of low cost ferroelectric and clean energy storage multifunctional materials. Modification in design and production of a low cost material with well proven process provides pathway for high energy density dielectric energy storage. We studied fluorine doped a commercially well-established material system barium strontium titanate with two different concentrations of dopants and studied the morphological transition and its effect on properties. It was observed that sample with higher concentration transitioned much faster into glassy state, followed by growth of fibers which turned into a self-arranged bird nest type shape. The sample with lower concentration changed slowly into glassy state and only few fibers were farmed. Dielectric was highly dependent on processing methods and shows variation with crystallinity of material, temperature and cooling conditions during processing. In the higher concentration range, we observed nano-scale interface breakdown very similar to that of solid-liquid interface breakdown during crystal growth.

dielectric↗
NASA NTRS1976

The morphological evolution of mare-highland contacts - A potential measure of relative mare surface age

The uniform breaks in slopes along many mare-highland contacts may be debris aprons transported primarily by impact erosion at relatively slow rates. Other suggestions, such as the 'high lava mark' hypothesis, appear inadequate to explain all of the unique characteristics of these widespread features. There is a reasonable correlation of overall slope form (profile) and apron distribution with established mare age provinces. Distinctive debris aprons in the younger maria could represent the initial stages of lunar slope degradation produced mainly by the postmare impact flux. The growth of debris aprons must be qualitatively related to the impact flux recorded on adjacent mare surfaces and could provide an approximate means of extrapolating relative mare ages to highland scarps and crater walls. By combining detailed measurements of lunar slopes with development of a realistic model for impact modification of these features, approximate limits for the cumulative lunar flux distribution through time might be derived.

Young, R. A.↗
NASA NTRS1992

The morphology and evolution of coronae on Venus

The morphology and morphometry of a number of coronae and related features on Venus are discussed with reference to new data from the Magellan spacecraft. The specific features discussed are concentrated in the portion of Venus imaged during about the first three months of Magellan mapping. Sequences of events and basic geophysical processes involved in the formation of these features are inferred.

Squyres, Steven W.↗
NASA NTRS1982

Craters and basins on Ganymede and Callisto - Morphological indicators of crustal evolution

The morphologic characteristics of craters and palimpsests on Ganymede and Callisto are surveyed, and the crustal properties of these satellites and the evolution of the properties are studied. The morphology of bowl-shaped craters, smooth-floored craters, craters without central peaks, craters with central pits, chain craters on Callisto, the Gilgamesh and Western Equatorial Basins on Ganymede, crater palimpsests and penepalimpsests, multiring structures on Callisto, and the Galileo Regio rimmed furrow system on Ganymede are described individually. The crustal evolution is addressed by examining the development of the Galileo Regio system, the distribution of crater retention ages, the record of ray clusters, the thermal history of the lithosphere of Ganymede, and the origin of the central pits. It is suggested that as the lithosphere of each satellite cooled and thickened, crater retentivity spread as a wave from the polar regions and the antapex toward the apex; at any given location, progressively larger craters were retained with the passage of time.

Passey, Q. R.↗
NASA NTRS1991

Morphology and evolution of coronae and ovoids on Venus

Coronae and ovoids on Venus were first identified in Venera 15/16 data. They are distinctive and apparently unique to the planet, and may be important indicators of processes operating in the Venusian mantle. Magellan images have provided the first high resolution views of coronae and ovoid morphology. Herein, the general geologic character is described of coronae and ovoids, and some inferences are drawn about their geologic evolution. Coronae are circular to elongate features surrounded by an annulus of deformational features, with a relatively raised or indistinct topographic signature and, commonly, a peripheral trough or moat. Ovoids are circular to elongate features other than coronae with either positive or negative topographic signatures, associated with tectonic deformation and volcanism. The relationship of these two geologic features to each other and to Venusian geology is briefly discussed.

Squyres, Steven W.↗
NASA NTRS1981

The morphology and evolution of Ganymede and Calisto

Images of Ganymede and Callisto, Jupiter's two largest moons, among the largest known predominantly icy planetary objects, were obtained by the two Voyager spacecraft. Voyager images were used to investigate the surface characteristics, geologic processes, and internal evolution of Ganymede and Callisto. Ganymede shows two principal types of terrain: one dark, old, and heavily cratered; and another brighter, younger, and characterized by complex patterns of grooves. Voyager imagers were used to determine photometric properties of surface features on both bodies at phase angles up to 120 deg. Surface temperatures are calculated for the major terrain types. Callisto is found to be somewhat warmer than Ganymede. The temperature difference between grooved and cratered terrain on Ganymede is small. A model for the origin of grooved terrain is considered in which extension creates broad, downdropped rift zones in the crust that are filled with water or ice from below.

Squyres, S. W.↗
NASA NTRS1987

Planetary nebular carbon-to-oxygen ratios, morphology and evolution

Observations secured with the image tube scanner (ITS) at the Shane 3 m telescope were compared with the data obtained with the International Ultraviolet Explorer (IUE). The spectra of this nitrogen-rich object was analyzed with the aid of the theoretical nubular models. The abundances of Ne, S, Cl, and Ar appear to be essentially solar to within a factor two. Two remarkable high-excitation planetary nebulae are IC 1297 and M1-1. The spectra of these objects are analyzed with the aid of the theoretical nebular models as far as possible. The models permit one to estimate the fraction of unobservable ions of abundant elements.

Aller, Lawrence H.↗
NASA NTRS1992

On the morphological development of second-phase particles in elastically-stressed solids

We examine the equilibrium shape and the dynamics of the morphological evolution of a coherent misfitting particle in an elastically anisotropic medium. No a priori assumptions are made on the possible particle morphologies; the particle evolves in a manner consistent with both the diffusion and elastic fields surrounding the particle and the thermodynamics of interfaces in stressed solids. Through these calculations we find the thermodynamically stable equilibrium shape of a misfitting particle. By thermodynamically stable we mean that all the equilibrium conditions, elastic, chemical and interfacial are satisfied simultaneously, in contrast to previous treatments which determined the equilibrium shape by minimizing the sum of the elastic and interfacial energies for certain classes of particle shapes. We find that the equilibrium particle morphologies are not simple geometric shapes, have fourfold symmetry and a continuously varying interfacial curvature with position along the interface. Furthermore, the results show that the times required for a particle to evolve to its equilibrium morphology are likely to be within those which are accessible experimentally. In addition, we develop a general approach for determining the equilibrium shape of a particle in an elastically stressed solid.

Voorhees, P. W.↗