Search NASA⌕ Search

SEARCH · Search NASA

Results for “multigrid solvers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2004

Analysis Tools for CFD Multigrid Solvers

Analysis tools are needed to guide the development and evaluate the performance of multigrid solvers for the fluid flow equations. Classical analysis tools, such as local mode analysis, often fail to accurately predict performance. Two-grid analysis tools, herein referred to as Idealized Coarse Grid and Idealized Relaxation iterations, have been developed and evaluated within a pilot multigrid solver. These new tools are applicable to general systems of equations and/or discretizations and point to problem areas within an existing multigrid solver. Idealized Relaxation and Idealized Coarse Grid are applied in developing textbook-efficient multigrid solvers for incompressible stagnation flow problems.

Mineck, Raymond E.↗
NASA NTRS2004

Analysis Tools for CFD Multigrid Solvers

Analysis tools are needed to guide the development and evaluate the performance of multigrid solvers for the fluid flow equations. Classical analysis tools, such as local mode analysis, often fail to accurately predict performance. Two-grid analysis tools, herein referred to as Idealized Coarse Grid and Idealized Relaxation iterations, have been developed and evaluated within a pilot multigrid solver. These new tools are applicable to general systems of equations and/or discretizations and point to problem areas within an existing multigrid solver. Idealized Relaxation and Idealized Coarse Grid are applied in developing textbook-efficient multigrid solvers for incompressible stagnation flow problems.

Mineck, Raymond E.↗
NASA NTRS1993

A multigrid solver for the semiconductor equations

We present a multigrid solver for the exponential fitting method. The solver is applied to the current continuity equations of semiconductor device simulation in two dimensions. The exponential fitting method is based on a mixed finite element discretization using the lowest-order Raviart-Thomas triangular element. This discretization method yields a good approximation of front layers and guarantees current conservation. The corresponding stiffness matrix is an M-matrix. 'Standard' multigrid solvers, however, cannot be applied to the resulting system, as this is dominated by an unsymmetric part, which is due to the presence of strong convection in part of the domain. To overcome this difficulty, we explore the connection between Raviart-Thomas mixed methods and the nonconforming Crouzeix-Raviart finite element discretization. In this way we can construct nonstandard prolongation and restriction operators using easily computable weighted L(exp 2)-projections based on suitable quadrature rules and the upwind effects of the discretization. The resulting multigrid algorithm shows very good results, even for real-world problems and for locally refined grids.

Bachmann, Bernhard↗
NASA NTRS1990

A multigrid solver for semi-implicit global shallow-water models

A multigrid solver is developed for the discretized two-dimensional elliptic equation on the sphere that arises from a semiimplicit time discretization of the global shallow-water equations. Different formulations of the semiimplicit scheme result in variable-coefficient Helmholtz-type equations for which no fast direct solvers are available. The efficiency of the multigrid solver is optimal, in the sense that the total operation count is proportional to the number of unknowns. Numerical experiments using initial data derived from actual 300-mb height and wind velocity fields indicate that the present model has very good accuracy and stability properties.

Barros, Saulo R. M.↗
NASA NTRS1998

Three-Dimensional High-Lift Analysis Using a Parallel Unstructured Multigrid Solver

A directional implicit unstructured agglomeration multigrid solver is ported to shared and distributed memory massively parallel machines using the explicit domain-decomposition and message-passing approach. Because the algorithm operates on local implicit lines in the unstructured mesh, special care is required in partitioning the problem for parallel computing. A weighted partitioning strategy is described which avoids breaking the implicit lines across processor boundaries, while incurring minimal additional communication overhead. Good scalability is demonstrated on a 128 processor SGI Origin 2000 machine and on a 512 processor CRAY T3E machine for reasonably fine grids. The feasibility of performing large-scale unstructured grid calculations with the parallel multigrid algorithm is demonstrated by computing the flow over a partial-span flap wing high-lift geometry on a highly resolved grid of 13.5 million points in approximately 4 hours of wall clock time on the CRAY T3E.

Mavriplis, Dimitri J.↗
NASA NTRSDate not supplied

Implicit Preconditioning for Explicit Multigrid Solvers on Cut-Cell Cartesian Meshes

This work assesses the effectiveness of linearized implicit Euler preconditioning for multigrid solvers using an unpreconditioned, Jacobian-free Newton Krylov method to converge the linear system of equations. Multigrid convergence rates improve to approximately 0.75 across the cases tested including a Mach 2 supersonic wedge, transonic NACA 0012 airfoil, and ONERA M6 wing. While larger Krylov subspaces increase the convergence rate, they also increase the computational cost, such that 4-8 Krylov vectors often offers the fastest turnaround. Further reductions in computational cost are achieved with a sequential hybrid preconditioner that begins with the explicit multigrid solver before transitioning to the preconditioned algorithm later on. In addition, a novel implementation of dual time stepping is extended to include both common BDF methods as well as high-order implicit Runge-Kutta schemes. This particular formulation, which uses A −1 preconditioning, is amenable to matrix-free solvers, and the L-stable methods are especially suited for meshes with arbitrarily small cut-cells. Asymptotic order of convergence is demonstrated for BDF1, BDF2, SDIRK2, and 3rd-order Radau IIA time integration with unsteady 2D vortex simulations.

ARMD↗
NASA NTRS1986

Application of data flow concepts to a multigrid solver for the Euler equations

In this study a multigrid solver for Euler equations (FLO52R) was examined to determine its performance potential on a hypothetical computer using a data flow architecture. The proposed computer would require massive parallelism to realize its design performance. On the other hand this parallelism would be more easily realized than with a conventional vector processor such as the Cray-1S. Several changes to the proposed design substantially alleviated most of the remaining bottlenecks to parallel processing. Other changes allowed clearer definition of memory access and disk I/O. Finally, a portion of the algorithm was rewritten to improve parallel performance. With these changes, performance levels approaching that of a Cray-1S may be possible for a computer costing far less. Estimates are given for overall speed, memory, and network bandwidth, and for instruction memory requirements.

Merriam, M. L.↗
NASA NTRS2001

A Parallel Multigrid Solver for Viscous Flows on Anisotropic Structured Grids

This paper presents an efficient parallel multigrid solver for speeding up the computation of a 3-D model that treats the flow of a viscous fluid over a flat plate. The main interest of this simulation lies in exhibiting some basic difficulties that prevent optimal multigrid efficiencies from being achieved. As the computing platform, we have used Coral, a Beowulf-class system based on Intel Pentium processors and equipped with GigaNet cLAN and switched Fast Ethernet networks. Our study not only examines the scalability of the solver but also includes a performance evaluation of Coral where the investigated solver has been used to compare several of its design choices, namely, the interconnection network (GigaNet versus switched Fast-Ethernet) and the node configuration (dual nodes versus single nodes). As a reference, the performance results have been compared with those obtained with the NAS-MG benchmark.

Prieto, Manuel↗
NASA NTRS2001

Transonic Drag Prediction Using an Unstructured Multigrid Solver

This paper summarizes the results obtained with the NSU-3D unstructured multigrid solver for the AIAA Drag Prediction Workshop held in Anaheim, CA, June 2001. The test case for the workshop consists of a wing-body configuration at transonic flow conditions. Flow analyses for a complete test matrix of lift coefficient values and Mach numbers at a constant Reynolds number are performed, thus producing a set of drag polars and drag rise curves which are compared with experimental data. Results were obtained independently by both authors using an identical baseline grid and different refined grids. Most cases were run in parallel on commodity cluster-type machines while the largest cases were run on an SGI Origin machine using 128 processors. The objective of this paper is to study the accuracy of the subject unstructured grid solver for predicting drag in the transonic cruise regime, to assess the efficiency of the method in terms of convergence, cpu time, and memory, and to determine the effects of grid resolution on this predictive ability and its computational efficiency. A good predictive ability is demonstrated over a wide range of conditions, although accuracy was found to degrade for cases at higher Mach numbers and lift values where increasing amounts of flow separation occur. The ability to rapidly compute large numbers of cases at varying flow conditions using an unstructured solver on inexpensive clusters of commodity computers is also demonstrated.

Mavriplis, D. J.↗
NASA NTRS1999

Solving Upwind-Biased Discretizations: Multigrid Solver Using Semicoarsening - 2

This paper studies a novel multigrid approach to the solution for a second order upwind biased discretization of the convection equation in two dimensions. This approach is based on semi-coarsening and well balanced explicit correction terms added to coarse-grid operators to maintain on coarse-grid the same cross-characteristic interaction as on the target (fine) grid. Colored relaxation schemes are used on all the levels allowing a very efficient parallel implementation. The results of the numerical tests can be summarized as follows: 1) The residual asymptotic convergence rate of the proposed V(0, 2) multigrid cycle is about 3 per cycle. This convergence rate far surpasses the theoretical limit (4/3) predicted for standard multigrid algorithms using full coarsening. The reported efficiency does not deteriorate with increasing the cycle, depth (number of levels) and/or refining the target-grid mesh spacing. 2) The full multi-grid algorithm (FMG) with two V(0, 2) cycles on the target grid and just one V(0, 2) cycle on all the coarse grids always provides an approximate solution with the algebraic error less than the discretization error. Estimates of the total work in the FMG algorithm are ranged between 18 and 30 minimal work units (depending on the target (discretizatioin). Thus, the overall efficiency of the FMG solver closely approaches (if does not achieve) the goal of the textbook multigrid efficiency. 3) A novel approach to deriving a discrete solution approximating the true continuous solution with a relative accuracy given in advance is developed. An adaptive multigrid algorithm (AMA) using comparison of the solutions on two successive target grids to estimate the accuracy of the current target-grid solution is defined. A desired relative accuracy is accepted as an input parameter. The final target grid on which this accuracy can be achieved is chosen automatically in the solution process. the actual relative accuracy of the discrete solution approximation obtained by AMA is always better than the required accuracy; the computational complexity of the AMA algorithm is (nearly) optimal (comparable with the complexity of the FMG algorithm applied to solve the problem on the optimally spaced target grid).

Diskin, Boris↗
NASA NTRS1995

A unified multigrid solver for the Navier-Stokes equations on mixed element meshes

A unified multigrid solution technique is presented for solving the Euler and Reynolds-averaged Navier-Stokes equations on unstructured meshes using mixed elements consisting of triangles and quadrilaterals in two dimensions, and of hexahedra, pyramids, prisms, and tetrahedra in three dimensions. While the use of mixed elements is by no means a novel idea, the contribution of the paper lies in the formulation of a complete solution technique which can handle structured grids, block structured grids, and unstructured grids of tetrahedra or mixed elements without any modification. This is achieved by discretizing the full Navier-Stokes equations on tetrahedral elements, and the thin layer version of these equations on other types of elements, while using a single edge-based data-structure to construct the discretization over all element types. An agglomeration multigrid algorithm, which naturally handles meshes of any types of elements, is employed to accelerate convergence. An automatic algorithm which reduces the complexity of a given triangular or tetrahedral mesh by merging candidate triangular or tetrahedral elements into quadrilateral or prismatic elements is also described. The gains in computational efficiency afforded by the use of non-simplicial meshes over fully tetrahedral meshes are demonstrated through several examples.

Mavriplis, D. J.↗
NASA NTRS1999

Advanced Multigrid Solvers for Fluid Dynamics

The main objective of this project has been to support the development of multigrid techniques in computational fluid dynamics that can achieve "textbook multigrid efficiency" (TME), which is several orders of magnitude faster than current industrial CFD solvers. Toward that goal we have assembled a detailed table which lists every foreseen kind of computational difficulty for achieving it, together with the possible ways for resolving the difficulty, their current state of development, and references. We have developed several codes to test and demonstrate, in the framework of simple model problems, several approaches for overcoming the most important of the listed difficulties that had not been resolved before. In particular, TME has been demonstrated for incompressible flows on one hand, and for near-sonic flows on the other hand. General approaches were advanced for the relaxation of stagnation points and boundary conditions under various situations. Also, new algebraic multigrid techniques were formed for treating unstructured grid formulations. More details on all these are given below.

Brandt, Achi↗
NASA NTRS1996

An Algebraic Multigrid Solver for Navier-Stokes Problems in the Discrete Second-Order Approximation

An algebraic multigrid scheme is presented for solving the discrete Navier-Stokes equations to second-order accuracy using the defect-correction method. Solutions have been obtained for problems involving both structured and unstructured meshes, with the resolution and resolution grading controlled by global and local mesh refinements. The solver is efficient and robust to the extent that no underrelaxation of variables has been required to ensure convergence, but rates of convergence can be improved with small amounts of underrelaxation of the velocity-pressure coupling. Provided that the computational mesh can resolve the flow field, convergence characteristics are almost mesh independent. Rates of convergence actually improve with refinement, asymptotically approaching mesh independent values. For extremely coarse meshes where dispersive truncation errors would be expected to prevent convergence (or even induce divergence), solutions can still be obtained by using explicit underrelaxation in the iterative cycle.

Webster, R.↗
NASA NTRS1995

A 3D agglomeration multigrid solver for the Reynolds-averaged Navier-Stokes equations on unstructured meshes

An agglomeration multigrid strategy is developed and implemented for the solution of three-dimensional steady viscous flows. The method enables convergence acceleration with minimal additional memory overheads, and is completely automated, in that it can deal with grids of arbitrary construction. The multigrid technique is validated by comparing the delivered convergence rates with those obtained by a previously developed overset-mesh multigrid approach, and by demonstrating grid independent convergence rates for aerodynamic problems on very large grids. Prospects for further increases in multigrid efficiency for high-Reynolds number viscous flows on highly stretched meshes are discussed.

Marvriplis, D. J.↗
NASA NTRS1994

A genuinely multidimensional upwind scheme and efficient multigrid solver for the compressible Euler equations

We present a new approach towards the construction of a genuinely multidimensional high-resolution scheme for computing steady-state solutions of the Euler equations of gas dynamics. The unique advantage of this approach is that the Gauss-Seidel relaxation is stable when applied directly to the high-resolution discrete equations, thus allowing us to construct a very efficient and simple multigrid steady-state solver. This is the only high-resolution scheme known to us that has this property. The two-dimensional scheme is presented in detail. It is formulated on triangular (structured and unstructured) meshes and can be interpreted as a genuinely two-dimensional extension of the Roe scheme. The quality of the solutions obtained using this scheme and the performance of the multigrid algorithm are illustrated by the numerical experiments. Construction of the three dimensional scheme is outlined briefly as well.

Sidilkover, David↗
NASA NTRS1981

Multigrid solvers on parallel computers

Massively parallel computers, as considered in this investigation, are not yet available. However, a large-scale parallel computer cannot usefully be designed before the hypothetical algorithms which will employ it are studied. Most of the studies of parallel partial differential equations (PDE) solvers are based on solution techniques much slower (on sequential machines) than multigrid methods. Multigrid methods are highly parallelizable. Each of their processes can simultaneously be performed at all grid points. The present investigation is concerned with a preliminary exploration of the potential of multigrid, or, more generally, Multi-Level Adaptive Techniques (MLAT) on computers with many processors. Basic processes are considered, taking into account coarse-grid approximation, relaxation, coarse-grid corrections, full multigrid algorithms, nonlinear problems and eigenvalue problems, fine-to-coarse correction, and chains of problems. Details of parallel multigrid processing are also examined.

Brandt, A.↗
NASA NTRS1992

A 3D finite element multigrid solver for the Euler equations

A low storage, computationally efficient algorithm for the solution of the compressible Euler equations on unstructured tetrahedral meshes is developed. The algorithm takes the form of a centered scheme with the explicit addition of a high accuracy artificial viscosity and the solution is advanced to steady state by means of a multistage timestepping method. The side-based data structure which is employed enables a clear connection to be established between the proposed algorithm and upwind cell vertex schemes for unstructured meshes. The computational efficiency of the procedure is improved by incorporating an unstructured multigrid acceleration procedure. A number of flows of practical interest are analyzed to demonstrate the numerical performance of the proposed approach.

Peraire, J.↗