Search NASA⌕ Search

SEARCH · Search NASA

Results for “multipath interference”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

A study of GPS measurement errors due to noise and multipath interference for CGADS

This report describes a study performed by the Colorado Center for Astrodynamics Research (CCAR) on GPS measurement errors in the Codeless GPS Attitude Determination System (CGADS) due to noise and multipath interference. Preliminary simulation models fo the CGADS receiver and orbital multipath are described. The standard FFT algorithms for processing the codeless data is described and two alternative algorithms - an auto-regressive/least squares (AR-LS) method, and a combined adaptive notch filter/least squares (ANF-ALS) method, are also presented. Effects of system noise, quantization, baseband frequency selection, and Doppler rates on the accuracy of phase estimates with each of the processing methods are shown. Typical electrical phase errors for the AR-LS method are 0.2 degrees, compared to 0.3 and 0.5 degrees for the FFT and ANF-ALS algorithms, respectively. Doppler rate was found to have the largest effect on the performance.

Axelrad, Penina↗

Robust Quantum Control via Multipath Interference for Thousandfold Phase Amplification in a Resonant Atom Interferometer

We introduce a novel technique for enhancing the robustness of light-pulse atom interferometers against the pulse infidelities that typically limit their sensitivities. The technique uses quantum optimal control to favorably harness the multipath interference of the stray trajectories produced by imperfect atom-optics operations. We apply this method to a resonant atom interferometer and achieve thousandfold phase amplification, representing a 50-fold improvement over the performance observed without optimized control. Moreover, we find that spurious interference can arise from the interplay of spontaneous emission and many-pulse sequences and demonstrate optimization strategies to mitigate this effect. Given the ubiquity of spontaneous emission in quantum systems, these results may be valuable for improving the performance of a diverse array of quantum sensors. We anticipate our findings will significantly benefit the performance of matter-wave interferometers for a variety of applications, including dark matter, dark energy, and gravitational wave detection.

47 OTHER INSTRUMENTATION↗

Robust Positioning in the Presence of Multipath and NLOS GNSS Signals

GNSS signals can be blocked and reflected by nearby objects, such as buildings, walls, and vehicles. They can also be reflected by the ground and by water. These effects are the dominant source of GNSS positioning errors in dense urban environments, though they can have an impact almost anywhere. Non- line-of-sight (NLOS) reception occurs when the direct path from the transmitter to the receiver is blocked and signals are received only via a reflected path. Multipath interference occurs, as the name suggests, when a signal is received via multiple paths. This can be via the direct path and one or more reflected paths, or it can be via multiple reflected paths. As their error characteristics are different, NLOS and multipath interference typically require different mitigation techniques, though some techniques are applicable to both. Antenna design and advanced receiver signal processing techniques can substantially reduce multipath errors. Unless an antenna array is used, NLOS reception has to be detected using the receiver's ranging and carrier-power-to-noise-density ratio (C/N0) measurements and mitigated within the positioning algorithm. Some NLOS mitigation techniques can also be used to combat severe multipath interference. Multipath interference, but not NLOS reception, can also be mitigated by comparing or combining code and carrier measurements, comparing ranging and C/N0 measurements from signals on different frequencies, and analyzing the time evolution of the ranging and C/N0 measurements.

McGraw, Gary A.↗

Gravitizing the quantum

We discuss a new approach to the problem of quantum gravity in which the quantum mechanical structures that are traditionally fixed, such as the Fubini–Study metric in the Hilbert space of states, become dynamical and so implement the idea of gravitizing the quantum. In particular, in this formulation of quantum gravity the quantum geometry is still consistent with the principles of unitarity and also captures fundamental aspects of (quantum) gravity, such as topology change. As a result, we address specific ways of testing this new approach to quantum gravity by utilizing multipath interference and optical lattice atomic clocks.

Quantum gravity↗

Quantum-interference-initiated superradiant and subradiant emission from entangled atoms

We calculate the radiative characteristics of emission from a system of entangled atoms which can have a relative distance larger than the emission wavelength. We develop a quantum multipath interference approach which explains both super- and subradiance though the entangled states have zero dipole moment. We derive a formula for the radiated intensity in terms of different interfering pathways. We further show how the interferences lead to directional emission from atoms prepared in symmetric W states. As a byproduct of our work we show how Dicke's classic result can be understood in terms of interfering pathways. In contrast to the previous works on ensembles of atoms, we focus on finite numbers of atoms prepared in well characterized states.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Lowering the Spectral Detection Threshold for Molecular Impurities in Gas Mixtures by Interference Multiplexing

We consider the most feasible ways to significantly improve the sensitivity of spectroscopic methods for detection and measurement of trace concentrations of greenhouse gas molecules in the atmosphere. The proposed methods are based on combining light fluxes from a number of spectral components of the specified molecule on the same photodetector, taking into account the characteristic features of the transmission spectrum of devices utilizing multipath interference effects.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Development And Test of A Digitally Steered Antenna Array for The Navigator GPS Receiver

Global Positioning System (GPS)-based navigation has become common for low-Earth orbit spacecraft as the signal environment is similar to that on the Earth s surface. The situation changes abruptly, however, for spacecraft whose orbital altitudes exceed that of the GPS constellation. Visibility is dramatically reduced and signals that are present may be very weak and more susceptible to interference. GPS receivers effective at these altitudes require increased sensitivity, which often requires a high-gain antenna. Pointing such an antenna can pose a challenge. One efficient approach to mitigate these problems is the use of a digitally steered antenna array. Such an antenna can optimally allocate gain toward desired signal sources and away from interferers. This paper presents preliminary results in the development and test of a digitally steered antenna array for the Navigator GPS research program at NASA s Goddard Space Flight Center. In particular, this paper highlights the development of an array and front-end electronics, the development and test of a real-time software GPS receiver, and implementation of three beamforming methods for combining the signals from the array. Additionally, this paper discusses the development of a GPS signal simulator which produces digital samples of the GPS L1C/A signals as they would be received by an arbitrary antenna array configuration. The simulator models transmitter and receiver dynamics, near-far and multipath interference, and has been a critical component in both the development and test of the GPS receiver. The GPS receiver system was tested with real and simulated GPS signals. Preliminary results show that performance improvement was achieved in both the weak signal and interference environments, matching analytical predictions. This paper summarizes our initial findings and discusses the advantages and limitations of the antenna array and the various beamforming methods.

Pinto, Heitor David↗

Graphene as a high impedance surface for ultra-wideband electromagnetic waves

The metals are regularly used as reflectors of electromagnetic fields emitted by antennas ranging from microwaves up to THz. To enhance the reflection and thus the gain of the antenna, metallic high impedance surfaces (HIS) are used. HIS is a planar array of continuous metallic periodic cell surfaces able to suppress surface waves, which cause multipath interference and backward radiation in a narrow bandwidth near the cell resonance. Also, the image currents are reduced, and therefore the antenna can be placed near the HIS. We demonstrate that graphene is acting as a HIS surface in a very large bandwidth, from microwave to THz, suppressing the radiation leakages better than a metal.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Attosecond Electron Spectroscopy Using a Novel Interferometric Pump-Probe Technique

We present an interferometric pump-probe technique for the characterization of attosecond electron wave packets (WPs) that uses a free WP as a reference to measure a bound WP. We demonstrate our method by exciting helium atoms using an attosecond pulse (AP) with a bandwidth centered near the ionization threshold, thus creating both a bound and a free WP simultaneously. After a variable delay, the bound WP is ionized by a few-cycle infrared laser precisely synchronized to the original AP. By measuring the delay-dependent photoelectron spectrum we obtain an interferogram that contains both quantum beats as well as multipath interference. Analysis of the interferogram allows us to determine the bound WP components with a spectral resolution much better than the inverse of the AP duration.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Confinement Resonances in Photoionization of Xe-C{sub 60}{sup +}

Experimental evidence is presented for confinement resonances associated with photoabsorption by a Xe atom in a C{sub 60} cage. The giant 4d resonance in photoionization of Xe is predicted to be redistributed into four components due to multipath interference of photoelectron waves reflected by the cage. The measurements were made in the photon energy range 60-150 eV by merging a beam of synchrotron radiation with a mass/charge selected Xe-C{sub 60}{sup +} ion beam. The phenomenon was observed in the Xe-C{sub 583}{sup +} product ion channel.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electromagnetic Simulation of the Near-Field Distribution around a Wind Farm

An efficient approach to compute the near-field distribution around and within a wind farm under plane wave excitation is proposed. To make the problem computationally tractable, several simplifying assumptions are made based on the geometry problem. By comparing the approximations against full-wave simulations at 500 MHz, it is shown that the assumptions do not introduce significant errors into the resulting near-field distribution. The near fields around a 3 × 3 wind farm are computed using the developed methodology at 150 MHz, 500 MHz, and 3 GHz. Both the multipath interference patterns and the forward shadows are predicted by the proposed method.

Yang, Shang-Te↗

Multipath errors in range rate measurement by a TDRS/VHF - GRARR

Range rate errors due to multipath reflection are calculated for a tracking and data relay satellite system using the VHF Goddard range and range rate (GRARR) system. At VHF the reflection is primarily specular, and the strength of the multipath relative to the direct path can be modeled in terms of the geometry and the surface characteristics, specifically the root-mean-square (rms) ocean wave height. The uplink and downlink multipath introduces phase jitter on the GRARR carrier and subcarrier. The derivation of these effects is reviewed leading to an expression for the rms range rate error. The derivation assumed the worst-case orbital configurations in which there was very little relative specular Doppler. This means that the specular multipath interference was not attenuated by the carrier and subcarrier PLL transfer functions. Curves of range rate error are presented as a function of grazing angle with wave height 0.3 to 0.7 meters and spacecraft altitude 100 to 700 miles as parameters.

Sohn, S. J.↗

Simulation results for an innovative anti-multipath digital receiver

Simulation results are presented for the error rate performance of the recursive digital MAP detector for known M-ary signals in multiplicative and additive Gaussian noise. Plots of detection error rate versus additive signal to noise ratio are given, with multipath interference strength as a parameter. For comparison, the error rates of conventional coherent and noncoherent digital MAP detectors are simultaneously simulated and graphed. It is shown that with nonzero multiplicative noise, the error rates of the conventional detectors saturate at an irreducible level as additive signal to noise ratio increases. The error rate for the innovative detector continues to decrease rapidly with increasing additive signal to noise ratio. In the absence of multiplicative interference, the conventional coherent detector and the innovative detector are shown to exhibit identical performance.-

Painter, J. H.↗