Search NASA⌕ Search

SEARCH · Search NASA

Results for “multiprobe”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

The strategy and technique in determining the orbits of the Pioneer Venus multiprobe bus and probes

The Venus Multiprobe Mission presented the greatest degree of complexity for an Orbit Determination task inasmuch as the spacecraft was composed of a bus, a large probe, and three small probes, all of which impacted the planet at various times and locations. In addition, there were eight major maneuvers for the purpose of spacecraft-probe separation and trajectory retargeting. The multiprobe antenna polarization, antenna offset from the spin axis, and spacecraft rotation introduce signatures into the radiometric Doppler data. These signatures, especially in regard to effects seen in Doppler residuals, further increase the complexity of the orbit determination problem. This paper describes the strategy and technique in using this Doppler data to determine the orbits of the multiprobe bus, the large probe, and the three small probes.

Wong, S. K.↗
NASA NTRS1997

Geospace Multiprobes

The foregoing science discussions, the required measurements and the detailed implementation plans should provide ample evidence in support of the contention that geospace multiprobes are the next logical step forward in exploration of our environment. The advancement of technology in areas such as mechanical engineering, power systems, circuit miniaturization, high-capacity data storage, and innovative propulsion systems all allow the implementation of multiple satellite configurations within a constrained budget. The problems that have plagued our interpretation of previous data and the advancements that could not be made without the availability of multiple platforms can now be overcome. New multiprobe missions promise to produce a real leap forward in our understanding of the geospace environment for they will allow all the required measurements to be made in all the right places. The most efficient use of resources, and application of experience and knowledge, will be achieved from a series of missions such as envisioned by Solar Terrestrial Probes. The return for our investment in a multiprobe mission sequence is the organized advancement of our understanding in two key areas. First, we will understand the geospace environment to a level that will allow real quantitative assessment of the impacts of humans and the vulnerability of human space systems. Second, this advancement will allow us to more fully evaluate present and future data from other planetary environments to assess differences important to habitability.

Source record↗
NASA NTRS1980

Design and flight performance of the Pioneer Venus Multiprobe and Orbiter solar arrays

The designs of the solar arrays for the Pioneer Venus Orbiter and Multiprobe spacecraft are described, and the power output predicted for these arrays is compared with the in-space performance. The Orbiter solar array was designed to produce a minimum of 329 W at 28 V after 243 days in Venus orbit, except during eclipses and periapsis phases, when battery power was to be used. After 492 days in orbit, this solar array was producing 365.3 W at 29.6 V, exceeding its design objectives. The Multiprobe solar array produced sufficient power at low sun angles to effect the release of the large probe and the three small probes and to power the scientific instruments onboard the spacecraft during its approach and destructive entry into the Venusian atmosphere.

Goldhammer, L. J.↗
NASA NTRS2001

Venus Multiprobe Mission

A summary of the proposal for the Discovery Program Venus Multiprobe Mission (VMPM) which was submitted in 1994 will be presented. The major goal of the mission was to provide sufficient observations of winds and thermal structure in the Venus atmosphere that the mechanism producing the atmospheric superrotation could be identified. The superrotation has been a major unsolved problem of planetary science for over 30 years. In spite of many theoretical efforts and many spacecraft missions to Venus, the principal driving mechanism(s) remain undetermined. Sixteen small probes, modeled after the Pioneer Venus small probes, would enter the Venus atmosphere, and measure winds, temperatures, and pressures from 60 km to the surface. Towards the bottom of the atmosphere, measurements would be made at 10 meter intervals. Temperature and pressure measurements are similar to those used on Pioneer Venus, but are four times more sensitive. Winds would be obtained by dual-frequency, differential. long-baseline interferometry, using S- and X-band transmitters on the probes, and four receiving telescopes round the Pacific rim. The precision of wind measurements is 0.05 ms- 1 or better, at least twenty times more precise than for Pioneer Venus. Ground based observations occurring in conjunction with the multiprobe entries would provide a temporal context for the upper boundary to the probe observations. UV and near IR features would be tracked for periods of hours to weeks to obtain cloud level zonal mean and transient eddy circulations with accuracies of 10 /ms or better. The data would be processed into wind and opacity maps. A hierarchy of atmospheric numerical models would be used to distinguish different dynamical elements existing in the data. Primary among the models was the development of a Venus general circulation model containing all known physical processes.

Young, Richard E.↗
NASA NTRS1975

Langley Research Center entry aerothermodynamic technology development in support of Pioneer Venus multiprobe mission studies

A program of entry aerothermodynamics has been conducted to support the Pioneer Venus multiprobe mission. Aspects of the study include radiative property data, radiative blockage effectiveness measurements, heating calculations, aerodynamic and convective heating studies, and radio communications blackout models. Some of the historical background for the investigation is reviewed, and recommendations are made concerning the use of the developed technology in probe design and the continuation of certain elements of the program.

Olstad, W. B.↗
NASA NTRS1977

Pioneer Venus 1978 multiprobe spacecraft simulator

A test which duplicates the signals of the four probes to be deployed by the PV 78 multiprobe spacecraft was developed. It will be used for receiver operator training prior to the mission. This article describes the operation and characteristics of the test set.

Friedenburg, S. E.↗
NASA NTRS1980

Pioneer Venus multiprobe entry telemetry recovery

The entry phase of the Pioneer Venus Multiprobe Mission involved data transmission over a two hour span. The criticality of recovering those two hours of data, coupled with the fact that there were no radio signals from the probes until their arrival at Venus, dictated unique telemetry recovery approaches on the ground. The result was double redundancy, use of spectrum analyzers to aid in rapid acquisition of the signals, and development of a technique for recovery of telemetry data without the use of real time coherent detection, which is normally employed for all other planetary missions.

Miller, R. B.↗
NASA NTRS1980

Pioneer Venus Multiprobe entry telemetry recovery

The Entry Phase of the Pioneer Venus Multiprobe Mission involved data transmission over only a two-hour span. The criticality of recovery of those two hours of data, coupled with the fact that there were no radio signals from the Probes until their arrival at Venus, dictated unique telemetry recovery approaches on the ground. The result was double redundancy, use of spectrum analyzers to aid in rapid acquisition of the signals, and development of a technique for recovery of telemetry data without the use of real-time coherent detection which is normally employed by all other NASA planetary missions.

Miller, R. B.↗
NASA NTRS1980

Magnetospheric multiprobes: Investigations and instrumentation

The multiprobe scientific objectives are to: (1) determine the spatial structure of plasma phenomena such as the aurora, convection reversals, and ion troughs; (2) separate spatial and temporal variations in these phenomena; (3) determine field aligned current densities; (4) perform multiple point analysis of particle beams, wave fields, and plasma clouds that are injected into the ionosphere and magnetosphere by Spacelab active experiment facilities. Trade studies described include: instrument accommodations, power, attitude determination, electric field antennas, storage and ejection, thermal control, tracking communications, command and data management, payload and mission specialist support, functional objectives, and orbital analysis.

Burch, J. L.↗
NASA NTRS1978

PC-403: Pioneer Venus multiprobe spacecraft mission operational characteristics document, volume 1

The operational characteristics of the multiprobe system and its subsystem are described. System level, description of the nominal phases, system interfaces, and the capabilities and limitations of system level performance are presented. Bus spacecraft functional and operational descriptions at the subsystem and unit level are presented. The subtleties of nominal operation as well as detailed capabilities and limitations beyond nominal performance are discussed. A command and telemetry logic flow diagram for each subsystem is included. Each diagram identifies in symbolic logic all signal conditioning encountered along each command signal path into, and each telemetry signal path out of the subsystem.

Barker, F. C.↗
NASA NTRS1985

Magnetospheric multiprobes: MMP/CHEMSAT

The magnetospheric multiprobes (MMP) are a set of ejectable, self contained, limited lifetime free flyers which are designed to make plasma diagnostic measurements at multiple locations within telemetry range of the space station's coorbiting platform and polar platform. When configured as CHEMSATs, one or more MMP's will conduct chemical releases as tracers or modifiers of the local plasma and field environment, while diagnostic measurements are made from other MMP's and from the nearby platform. The probes will be battery powered and will have lifetimes of a few days to several weeks. Up to 12 probes would be placed on the coorbiting platform and the polar platform every six months and two years respectively for use in the campaign mode of operation.

Burch, J.↗
NASA NTRS1984

Pioneer to Venus - The multiprobe and orbiter missions

The missions of the Pioneer multiprobe and orbiter spacecraft to Venus are surveyed and illustrated with drawings, photographs, maps, and diagrams. The general characteristics of Venus and the pre-Pioneer missions are reviewed; the developmental history of the Pioneer project is traced; the spacecraft and their orbits and deployment are described; and the scientific findings on the planet surface, atmosphere, and ionosphere are summarized. The experiments planned for the extended mission of the orbiter (through reentry in 1992) are briefly characterized, includidng solar-wind-interaction studies, comet detection, ionosphere and aeronomy investigations, global lightning survey, optical observations, gamma-ray-burst detection, radar mapping, gravity measurements, and observations of Halley's Comet during February, 1986.

Craig, R. A.↗
NASA NTRS1986

Magnetospheric multiprobes (MMP/CHEMSAT)

The magnetospheric multiprobes (MMP) are a set of ejectable, self contained, limited lifetime free flyers which are designed to make plasma diagnostic measurements at multiple locations within telemetry range of the space station's coorbiting platform and polar platform. When configured as CHEMSATs, one or more MMP's will conduct chemical releases as tracers or modifiers of the local plasma and field environment, while diagnostic measurements are made from other MMP's and from the nearby platform. The probes will be battery powered and will have lifetimes of a few days to several weeks. Up to 12 probes would be placed on the coorbiting platform and the polar platform every six months and two years respectively for use in the campaign mode of operation.

Burch, J.↗
NASA NTRS2021

Cosmology with the Roman Space Telescope - Multiprobe Strategies

We simulate the scientific performance of the Nancy Grace Roman Space Telescope High Latitude Survey (HLS) on dark energy and modified gravity. The 1.6-yr HLS Reference survey is currently envisioned to image 2000 deg2 in multiple bands to a depthof∼26.5 in Y, J, H and to cover the same area with slit-less spectroscopy beyond z=3. The combination of deep, multiband photometry and deep spectroscopy will allow scientists to measure the growth and geometry of the Universe through a variety of cosmological probes (e.g. weak lensing, galaxy clusters, galaxy clustering, BAO, Type Ia supernova) and, equally, it will allow an exquisite control of observational and astrophysical systematic effects. In this paper, we explore multiprobe strategies that can be implemented, given the telescope’s instrument capabilities. We model cosmological probes individually and jointly and account for correlated systematics and statistical uncertainties due to the higher order moments of the density field. We explore different levels of observational systematics for the HLS survey (photo-z and shear calibration) and ultimately run a joint likelihood analysis in N-dim parameter space. We find that the HLS reference survey alone can achieve a standard dark energy FoM of>300 when including all probes. This assumes no information from external data sets, we assume a flat universe however, and includes realistic assumptions for systematics. Our study of the HLS reference survey should be seen as part of a future community-driven effort to simulate and optimize the science return of the Roman Space Telescope.

Cosmological parameters↗