Search NASA⌕ Search

SEARCH · Search NASA

Results for “nanometers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Atmospheric transmission coefficients for laser pulses with spectral widths of a few tenths of a nanometer over the wavelength region from 800 to 860 nanometers

Effective atmospheric transmission spectra were calculated from 800 to 860 nanometers for laser sources with spectral widths of a few tenths of a nanometer. In this spectral region, the atmospheric absorption lines (water lines) have linewidths of a few hundredths of a nanometer, so that the transmission coefficient for a relatively wide laser pulse must be computed by taking a weighted average over the pulse spectral width. Laser spectral widths of several tenths of a nanometer are shown to reduce the effective absorption by water lines to as little as 10 to 20 percent, even when the laser is centered on a line or overlaps several lines. Thus, the effect of absorption by atmospheric water lines may be greatly reduced for laser communication systems using laser diode array transmitters, for which the pulse spectral width may be a few tenths of a nanometer.

Safren, H. G.↗
DOE OSTI2020

Nanometer-Scale Correlations in Aqueous Salt Solutions

The intermediate-range (1–4 nm) correlation of cations, an- ions, and water in aqueous alkaline earth salt solutions is measured using synchrotron X-ray diffraction. We differentiate from the entire solution structure factor, S(Q), a separate region at low Q (<1 °A-1) containing local diffraction maxima (pre-peaks) that indicate nanometer-scale oscillatory behavior. These features are quantitatively reproduced with classical molecular dynamics simulations. At high concentrations, the pre-peaks emerge from correlations arising from existence of small quasi close-packed lattice- like structures comprised of cation hydration spheres. We also analyze the concentration dependence of the pre-peak and discuss the overall results in light of the rich literature dealing with intermediate-range correlations underlying universal phenomena in concentrated electrolytes. The authors were supported by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences and Biosciences. Pacific Northwest National Laboratory (PNNL) is operated by Battelle for the U.S. Department of Energy under Contract No. DE-AC05-76RL01830. Computing resources were generously allocated by PNNL's Institutional Computing program. DOE Contract No. DEAC02- 06CH11357 supports operation of the Advanced Photon Source at Argonne National Laboratory.

Chemical physics, nucleation, Madelung potential↗
DOE OSTI2022

Disordered, Sub-Nanometer Ru Structures on CeO 2 are Highly Efficient and Selective Catalysts in Polymer Upcycling by Hydrogenolysis

We report non-degradable polyolefin plastics pose severe environmental threats, and thus demand efficient upcycling technologies. In this work, we discovered that low-loading (= 0.25 wt%) Ru/CeO 2 exhibits remarkable catalytic performance in the hydrogenolysis of polypropylene (PP), polyethylene (PE), and n-C 16 H 34 that is superior to high-loading (= 0.5 wt%) Ru/CeO 2 . They possess high PP conversion efficiency (7-fold increase over current literature reports), low selectivity towards undesired CH 4 , and good isomerization ability. In the low-loading range, the intrinsic activity of Ru in PP hydrogenolysis increases as the particle size decreases, opposite of the trend in the high-loading range. Detailed characterization revealed that the abrupt changes in catalytic behaviors coincide with Ru species transitioning from well-defined to highly disordered structures in the low-loading domain. The disordered Ru species were shown to be sub-nanometer in size and cationic. Mechanistically, the regioselectivity and the rate dependence on hydrogen pressure of C-C bond cleavage are different on low- and high-loading Ru/CeO 2 , both explained by the higher coverage of adsorbed hydrogen (*H) on low-loading Ru/CeO 2 . This work uncovers the remarkable catalytic performance of highly disordered, sub-nanometer, cationic Ru species in polyolefin hydrogenolysis, opening immense opportunities to develop effective, selective, and versatile catalysts for plastic upcycling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Combining Sub-nanometer Adhesion and Capping Layers for Thermally Stable Nanometer-Thick Au Films

Improving the thermal stability of Au thin films is critical if thermo-plasmonic applications such as heat-assisted magnetic recording are to become commercially viable. In this work, Al capping layers are deposited on M/Au films, where adhesion metal M = Ti or Ta, and are investigated for their utility in stabilizing Au thin films against dewetting. Therefore, contrary to previous investigations, it was found that thinner capping layers (0.5 nm) result in a greater stability than that conferred by thicker (1-5 nm) layers. Deposition of 0.5 nm of Al, which subsequently oxidizes when exposed to air, resulted in up to 10x stability enhancement. Similarly, capping with 0.5 nm Al resulted in less damping of the plasmonic response than with thicker capping layers. Finally, based on this work and previous work on metallic adhesion layers, optimally stable systems for thermo-plasmonic applications are proposed.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Nanometer-scale structure differences in the myofilament lattice spacing of two cockroach leg muscles correspond to their different functions

ABSTRACT Muscle is highly organized across multiple length scales. Consequently, small changes in the arrangement of myofilaments can influence macroscopic mechanical function. Two leg muscles of a cockroach have identical innervation, mass, twitch responses, length–tension curves and force–velocity relationships. However, during running, one muscle is dissipative (a ‘brake’), while the other dissipates and produces significant positive mechanical work (bifunctional). Using time-resolved X-ray diffraction in intact, contracting muscle, we simultaneously measured the myofilament lattice spacing, packing structure and macroscopic force production of these muscles to test whether structural differences in the myofilament lattice might correspond to the muscles' different mechanical functions. While the packing patterns are the same, one muscle has 1 nm smaller lattice spacing at rest. Under isometric stimulation, the difference in lattice spacing disappeared, consistent with the two muscles' identical steady-state behavior. During periodic contractions, one muscle undergoes a 1 nm greater change in lattice spacing, which correlates with force. This is the first identified structural feature in the myofilament lattice of these two muscles that shares their whole-muscle dynamic differences and quasi-static similarities.

Tune, Travis Carver↗
DOE OSTI2020

Nanometal-Interconnected Carbon Conductors (NICCS) for Advanced Electric Machines (RIT Final Technical Report)

Recent advancements in carbon nanotube (CNT) research have enabled lightweight, conductive wires as a transformative technology. Metal-carbon nanotube (CNT) hybrid conductors aim to combine the high conductivity of traditional metals with the low mass and temperature coefficient of resistance (TCR) of carbon nanotubes. The high conductivity of copper makes it a promising candidate to combine with CNTs in a hybrid structure, but there is limited physical and electrical interaction between copper and CNTs. The use of an interfacial layer offers one method of improving the interconnection of a Cu-CNT hybrid conductor. Over the course of this grant, a joule heating-driven chemical vapor deposition (CVD) technique was developed to deposit nanometal seeds throughout a porous, low-density (0.12 g/cm 3 , ~10 tex or mg/m) CNT roving template. Modification of the applied current to the CNT roving allows for the tuning of depositions towards either hot-spot site-specificity or overall uniformity. The effects of temperature, pressure, precursor mass, and the interval of applied current were investigated, demonstrating nanometal depositions ranging from less than 5 % w/w to over 85 % w/w. The versatility of CVD allows for a wide variety of metals to be deposited including copper, titanium, nickel, silver, tungsten, palladium, platinum, ruthenium, rhodium, and iridium. One preferred demonstration involved using platinum depositions to improve the electrical properties of metal-seeded CNTs across all mass loadings studied. Moreover, when the metal-seeded CNT wires were electroplated with copper, densified, and annealed under hydrogen/argon; the result was a Cu-CNT hybrid conductor with the highest conductivities reported to date. The good interconnection of the metal and CNT portions results in a stable conductor. An electrical conductivity of 16-20 MS/m was achieved for multiple Cu-CNT hybrid conductors at 150 °C, which exceeds the program goal for conductivity of greater than 15 MS/m for a 1 m long CNT wire. Overall, the research outcomes from the project showed improvements in CNT wire fabrication from roll-to-roll CVD grown carbon nanotube wires using nanometal interconnects to bridge CNT-to-CNT junctions, thus mitigating network contact resistances. Advanced nanometal interconnected carbon conductors (NICCs) were developed as a means to achieve novel light-weight wiring appropriate for applications that require the conductivity of metallic (i.e., Cu, Al, etc.) wires at elevated temperatures. High conductivity, low TCR electrical conductors such as the nanometal interconnected Cu-CNT hybrids have numerous future applications towards high efficiency motors, generators, and transformers. Specifically, the advanced wires have the ability to operate at lower resistance during conditions for standard electric motors at 150 °C, which would improve the electrical efficiency while lowering energy needs.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Prospects for sub-nanometer scale imaging of optical phenomena using electron microscopy

Imaging of optical phenomena at the sub-nanometer scale can offer fundamental insights into the electronic or vibrational states in atomic-scale defects, molecules, and nanoparticles, which are important in quantum information, heterogeneous catalysis, optoelectronics, and structural biology. Several techniques have surpassed the traditional Abbe diffraction limit and attained spatial resolutions down to a few nanometers, but sub-nanometer scale optics has remained elusive. Here, we propose an approach that combines spectrally specific photoabsorption with sub-nanometer scale resolution transmission electron microscopy (TEM) of photoexcited electrons. We first estimate the signal level and conditions required for imaging nanoscale optical phenomena in core-shell quantum dots (QDs) like CdS/CdTe. Furthermore, we show the possibility of imaging photoexcited states of atomic-scale defects in a monolayer hexagonal boron nitride (h-BN) using ab initio and high resolution (HR)TEM simulations. The ability to directly visualize photoexcited states at the sub-nanometer scale opens opportunities to study properties of individual quantum dots and atomic defects.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2026

Microscopy X-ray imaging enriched with small angle X-ray scattering for few nanometer resolution reveals shock waves and compression in intense short pulse laser irradiation of solids

Understanding how laser pulses compress solids into high-energy-density states requires diagnostics that simultaneously resolve macroscopic geometry and nanometer-scale structure. Here we present a combined X-ray imaging (XRM) and small-angle X-ray scattering (SAXS) approach that bridges this diagnostic gap. Using the Matter in Extreme Conditions end station at LCLS, we irradiated 25 μm copper wires with 45 fs, 0.9 J, 800 nm pulses at 3.5 × 10 19 W/cm 2 while probing with 8.2 keV XFEL pulses. XRM visualizes the evolution of ablation, compression, and inward-propagating fronts with ∼ 200 nm resolution, while SAXS quantifies their nanometer-scale sharpness via the time-resolved evolution of scattering streaks. The joint analysis reveals that an initially smooth compression steepens into a nanometer-sharp shock front after t sh ≈ (18 ± 3) ps, consistent with an analytical steepening model and hydrodynamic simulations. The front reaches a velocity of c sh ≈ 25 k m / s and a lateral width of several tens of microns, demonstrating direct observation of shock formation and decay at solid density for the first time with few-nanometer precision. This integrated XRM–SAXS method establishes a quantitative, multi-scale diagnostic of laser-driven shocks in dense plasmas relevant to inertial confinement fusion, warm dense matter, and planetary physics.

Kluge, Thomas [Helmholtz-Zentrum Dresden-Rossendor↗
DOE OSTI2020

Platinum nanometal interconnection of copper–carbon nanotube hybrid electrical conductors

This study demonstrates the versatility of Joule heating driven chemical vapor deposition to deposit nanometal interconnections into porous CNT roving with application in the production of high electrical conductivity copper-carbon nanotube (Cu-CNT) hybrids. Modifications of vapor deposition parameters allow for deposited nanometal masses from less than 5% w/w to over 85% w/w and distributions that can be controlled towards either hot-spot site-specificity or overall uniformity. Here, depositions of copper, platinum, nickel, palladium, ruthenium, rhodium, and iridium are demonstrated from acetylacetonate precursors. In particular, platinum acetylacetonate [Pt(acac) 2 ] deposits nanometal seeds that adhere tightly to the CNT roving, producing improvements in resistance and specific conductivity. The properties of the platinum deposition compared to the copper deposition motivate an investigation into its use as an interfacial layer for Cu-CNT hybrids. CNT conductors with ~30% w/w platinum are electroplated with copper, densified, and annealed to produce Cu-CNT hybrid conductors with specific conductivities as high as 5772 S m 2 /kg and TCR (from 300 to 600 K) as low as 3.12 × 10 –3 K –1 , indicating good interconnection of the metal and CNT portions. Room temperature conductivities of 29.8 MS/m are achieved, comparable to metallic conductors. Thus, Pt(acac) 2 seeded Cu-CNT hybrids offer abundant promise in high conductivity applications.

42 ENGINEERING↗
DOE OSTI2021

Photoabsorption Imaging at Nanometer Scales Using Secondary Electron Analysis

Optical imaging with nanometer resolution offers fundamental insights into light–matter interactions. Traditional optical techniques are diffraction limited with a spatial resolution >100 nm. Optical super-resolution and cathodoluminescence techniques have higher spatial resolutions, but these approaches require the sample to fluoresce, which many materials lack. Here, we introduce photoabsorption microscopy using electron analysis, which involves spectrally specific photoabsorption that is locally probed using a scanning electron microscope, whereby a photoabsorption-induced surface photovoltage modulates the secondary electron emission. We demonstrate spectrally specific photoabsorption imaging with sub-20 nm spatial resolution using silicon, germanium, and gold nanoparticles. Theoretical analysis and Monte Carlo simulations are used to explain the basic trends of the photoabsorption-induced secondary electron signal. Based on our current experiments and this analysis, we expect that the spatial resolution can be further improved to a few nanometers, thereby offering a general approach for nanometer-scale optical spectroscopic imaging and material characterization.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2020

Fracture toughness of zirconia with a nanometer size notch fabricated using focused ion beam milling

Zirconia with 3 mol% yttria (3Y-TZP) has been used for dental crowns and bridges due to its excellent mechanical behavior. Performing fracture toughness testing on this nanograin material, however, can be a challenge. For reliable results, fracture toughness testing requires an extremely sharp notch in the test specimen that closely approximates a very sharp crack. This study was to investigate an alternative method to produce nanometer-sized notches, which are less than the average grain size of 3Y-TZP, during the preparation of single-edge V-notched beam specimens and report the resulting fracture toughness value. We present a method using focused ion beam (FIB) milling to fabricate nanometer-sized notches in 3Y-TZP. The notch tip is <100 nm wide, which is smaller than the grain size, and is consistent throughout the thickness of the specimen. The FIB-notched specimens show a much reduced average fracture toughness of 5.64 ± 1.14 MPa√m compared to 8.90 ± 0.23 MPa√m for the specimens without FIB-notches. The FIB-milling did not appear to create any monoclinic phase prior to fracture toughness testing. Fractures originated at the FIB-notches, and the notch size can be readily identified post-mortem using a microscope. A considerable amount of tetragonal-to-monoclinic phase transformation was observed throughout the fracture surfaces. FIB milling provides an alternative method to fabricate nanometer-sized notches that are smaller than the grain size of tetragonal zirconia polycrystal. The fracture toughness determined using FIB-notches was ~5.64 MPa√m, smaller than the specimens with V-notches fabricated using saw blades.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Effect of CO 2 on the water slip flow at silica surfaces for nanometer slit pores of talc

In our previous study, Molecular Dynamics (MD) simulated water flow with no dissolved gas in nanometer slit pores of the hydrophobic talc surfaces revealed a slip length of about 0.5 nm, which is close to the size of “water exclusion zone” but much less than experimental slip length. Atomic Force Microscopy (AFM) imaging confirmed the presence of pancake shape nanobubbles at the hydrophobic talc (001) surface (size from tens to hundreds of nanometers). The effect of CO 2 on water slip flow in talc nanopores is reported to reveal the importance of dissolved gas for confined fluid flow. MD simulated 7 nm CO 2 nanobubbles were found to attach and spread at the talc (001) surface, consistent with the AFM observation. Simulated CO 2 saturated water flow in the slit pores of talc (001) surfaces predicted the generation of CO 2 nanobubbles at the end of the slit pore, due to the stabilization of a CO 2 film at the talc (001) surfaces and a water barrier at the edge surfaces of talc. A “critical thickness” of about 1.5 nm was found for CO 2 nanobubbles to be stabilized at the end of the talc (001) surface. With 1.5 nm CO 2 nanobubbles at the talc (001) surface of a 6 nm slit pore, a water slip length of 1.8 nm was determined. Furthermore, the nanometer slit pore simulations with dissolved CO 2 in water revealed an increased slip length. It is expected that an increased slip length value would be found with an increased CO 2 film thickness.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Grafting nanometer metal/oxide interface towards enhanced low-temperature acetylene semi-hydrogenation

Metal/oxide interface is of fundamental significance to heterogeneous catalysis because the seemingly “inert” oxide support can modulate the morphology, atomic and electronic structures of the metal catalyst through the interface. The interfacial effects are well studied over a bulk oxide support but remain elusive for nanometer-sized systems like clusters, arising from the challenges associated with chemical synthesis and structural elucidation of such hybrid clusters. We hereby demonstrate the essential catalytic roles of a nanometer metal/oxide interface constructed by a hybrid Pd/Bi 2 O 3 cluster ensemble, which is fabricated by a facile stepwise photochemical method. The Pd/Bi 2 O 3 cluster, of which the hybrid structure is elucidated by combined electron microscopy and microanalysis, features a small Pd-Pd coordination number and more importantly a Pd-Bi spatial correlation ascribed to the heterografting between Pd and Bi terminated Bi 2 O 3 clusters. The intra-cluster electron transfer towards Pd across the as-formed nanometer metal/oxide interface significantly weakens the ethylene adsorption without compromising the hydrogen activation. As a result, a 91% selectivity of ethylene and 90% conversion of acetylene can be achieved in a front-end hydrogenation process with a temperature as low as 44 °C.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Sequential surface synthesis of dispersed sub-nanometer iridium on titanium nitride for acidic water oxidation

Maximizing iridium utilization while maintaining high oxygen evolution reaction (OER) performance remains a persistent challenge in acidic water electrolysis. Immobilizing Ir on conductive, acid-stable supports is promising, yet simultaneously achieving sub-nanometer size, high area coverage, and strong electronic coupling is difficult. Here, we report a sequential surface synthesis on titanium nitride (TiN) that yields uniformly distributed sub-nanometer Ir arrays (∼0.7 nm). Our method uses ethylenediaminetetraacetic acid (EDTA) as a temporal scaffold: it chemisorbs to TiN to install dense chelating sites, captures Ir 3+ ions, and confines Ir cluster growth. A subsequent thermal treatment at 500 °C in a reducing atmosphere removes the ligand shell, while preserving ultrasmall particle size and establishing direct Ir–TiN electronic coupling. The optimized catalyst exhibits mixed Ir 0 /Ir x+ coordination with low charge-transfer resistance (R ct = 19.2 Ω), delivering a mass activity of 342 A g Ir −1 at 1.54 V in acidic electrolyte. In situ X-ray absorption spectroscopy reveals irreversible surface oxidation as the primary stability-limiting factor. This stepwise strategy provides a general framework for supported catalysts that maximize precious metal utilization via sub-nanometer dispersion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Fast quantum interferometry at the nanometer and attosecond scales with energy-entangled photons

In classical optical interferometry, loss and background complicate achieving fast nanometer-resolution measurements with illumination at low light levels. Conversely, quantum two-photon interference is unaffected by loss and background, but nanometer-scale resolution is physically difficult to realize. As a solution, we enhance two-photon interference with highly nondegenerate energy entanglement featuring photon frequencies separated by 177 THz. We observe measurement resolution at the nanometer (attosecond) scale with only O(10 4 ) photon pairs, despite the presence of background and loss. Our nondestructive thickness measurement of a metallic thin film agrees with atomic force microscopy, which often achieves better resolution via destructive means. With contactless, nondestructive measurements in seconds or faster, our instrument enables metrological studies in optically challenging contexts where background, loss, or photosensitivity are factors.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

RISE: robust iterative surface extension for sub-nanometer X-ray mirror fabrication

Precision optics have been widely required in many advanced technological applications. X-ray mirrors, as an example, serve as the key optical components at synchrotron radiation and free electron laser facilities. They are rectangular silicon or glass substrates where a rectangular Clear Aperture (CA) needs to be polished to sub-nanometer Root Mean Squared (RMS) to keep the imaging capability of the incoming X-ray wavefront at the diffraction limit. The convolutional polishing model requires a CA to be extended with extra data, from which the dwell time is calculated via deconvolution. However, since deconvolution is very sensitive to boundary errors and noise, the existing surface extension methods can hardly fulfill the sub-nanometer requirement. On one hand, the figure errors in a CA were improperly modeled during the extension, leading to continuity issues along the boundary. On the other hand, uncorrectable high-frequency errors and noise were also extended. In this study, we propose a novel Robust Iterative Surface Extension (RISE) method that resolves these problems with a data fitting strategy. RISE models the figure errors in a CA with orthogonal polynomials and ensures that only correctable errors are fit and extended. Combined with boundary conditions, an iterative refinement of dwell time is then proposed to compensate the errors brought by the extension and deconvolution, which drastically reduces the estimated figure error residuals in a CA while the increase of total dwell time is negligible. To our best knowledge, RISE is the first data fitting-based surface extension method and is the first to optimize dwell time based on iterative extension. An experimental verification of RISE is given by fabricating two elliptic cylinders (10 mm × 80 mm CAs) starting from a sphere with a radius of curvature around 173 m using ion beam figuring. The figure errors in the two CAs greatly improved from 204.96 nm RMS and 190.28 nm RMS to 0.62 nm RMS and 0.71 nm RMS, respectively, which proves that RISE is an effective method for sub-nanometer level X-ray mirror fabrication.

36 MATERIALS SCIENCE↗