Negative photoconductivity associated with impurity conduction in germanium.
Negative photoconductivity in germanium at temperature and doping levels important with impurity conduction
GERMANIUM↗
SEARCH · Search NASA
Results for “negative photoconductivity”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Negative photoconductivity associated with impurity conduction in germanium
Negative photoconductivity in doped germanium semiconductor device - solid state physics
PHOTOCONDUCTIVITY↗
High Mobility, High Carrier Density SnSe 2 Field‐Effect Transistors with Ultralow Subthreshold Swing and Gate‐Controlled Photoconductance Switching
2D and layered semiconductors are considered as promising electronic materials, particularly for applications that require high carrier mobility and efficient field-effect switching combined with mechanical flexibility. To date, however, the highest mobility has been realized primarily at low carrier concentration. Here, it is shown that few-layer/multilayer SnSe 2 gated by a solution top gate combines very high room-temperature electron mobility (up to 800 cm 2 V −1 s −1 ), along with large on-off current ratios (>10 5 ) and a subthreshold swing below the thermodynamic limit (50 mV per decade) in field-effect devices, at exceptionally large sheet carrier concentrations of ≈10 13 cm −2 . Observed mobility enhancements upon partial depletion of the channel point to near-surface defects or impurities as the mobility-limiting scattering centers. Under illumination, the resulting gap states give rise to gate-controlled switching between positive and negative photoconductance. The results qualify SnSe 2 as a promising layered semiconductor for flexible and wearable electronics, as well as for the realization of advanced approaches to photodetection.
36 MATERIALS SCIENCE↗
Monolayer Semiconductor Auger Detector
Auger recombination in semiconductors is a many-body phenomenon in which the recombination of electrons and holes is accompanied by excitation of other charge carriers. The excess energy of the excited carriers is normally rapidly converted to heat, making Auger processes difficult to probe directly. In this paper, we employ a technique in which the Auger-excited carriers are detected by their ability to tunnel out of the semiconductor through a thin barrier, generating a current. We use vertical van der Waals heterostructures with monolayer WSe 2 as the semiconductor, with hexagonal boron nitride as the tunnel barrier, and a graphite collector electrode. The Auger processes combined with resonant absorption produce characteristic negative photoconductance. We detect holes Auger-excited by both neutral and charged excitons and find that the Auger scattering is surprisingly strong under weak excitation. Our work expands the range of techniques available for probing relaxation processes in 2D materials.
47 OTHER INSTRUMENTATION↗
Long-Lived Population Inversion in Resonantly Driven Excitonic Antiferromagnet
Van der Waals magnets are an emerging material family for investigating light-matter interactions and spin-correlated excitations. Here, we report the discovery of a photo-induced state with a lifetime of 17 ps in the van der Waals antiferromagnet NiPS 3 , which appears exclusively with resonant pumping at 1.476 eV in the antiferromagnetic state. Furthermore, the long-lived state comes with a negative photoconductivity, a characteristic optical response of population inversion. Our findings demonstrate a promising pathway to potentially achieve long-lived lasing at terahertz frequencies in reduced dimensions.
36 MATERIALS SCIENCE↗
Pulse Compression Photoconductive Switching Using Negative Differential Mobility
Not Available
42 ENGINEERING↗
Hierarchical Hybrid Multifunctional Materials through Interface Engineering
This project focuses on the development of stimuli-responsive hybrid multifunctional materials. We place emphasis on the design, synthesis, structural characterization, evaluation of functional properties (electronic, thermal and optical) of several (1-x)Cu 2 Se/(x)WBGS hierarchical bulk composites between Cu 2 Se, a narrow band gap semiconductor (NBGS), with a range of wider band gap semiconductors (WBGS) such as CuMSe 2 (M = Al, Ga, In, Fe, Cr) and Cu 4 TiSe 4 . Cu2Se is a well-studied NBGS with excellent thermoelectric properties (high electrical conductivity, large thermopower, etc.) while CuMSe 2 and Cu 4 TiSe 4 are high performance solar absorber materials (large band gap, large absorption coefficient, etc.). Our primary objectives are (i) to demonstrate the ability to integrate dissimilar functional properties such as large optical absorption coefficient and high electronic conductivity, within (1-x)Cu 2 Se/(x)WBGS composite; and (ii) to establish the correlation between the hierarchical structural entanglement of Cu 2 Se with WBGS (CuMSe 2 or Cu 4 TiSe 4 ) phase, the interactions between native electronic defects within the coexisting phases in the resulting (1-x)Cu 2 Se/(x)WBGS bulk composites , and the impacts on their electronic conductivity, thermal transport and optical properties.
36 MATERIALS SCIENCE↗
Photon-assisted resonant tunneling through variably spaced superlattice energy filters
The observation of photon-assisted resonant tunneling in a multiple quantum well structure composed of doped quantum wells separated by variably space superlattice energy filters is reported. Electrons confined in the quantum wells are excited to the second quantized state by intersubband absorption of incident infrared radiation and are subsequently emitted through the filters under appropriate bias conditions. This is manifested by a distinct peak, with an associated negative differential photoconductance, in the photocurrent versus bias voltage characteristic at low temperatures.
Larsson, A.↗
Pulse compression photoconductive semiconductor switches
A photoconductive switch that uses materials that support negative differential mobility, whose operation leverages the pulse compression of a charge could to generate the “on” time of the pulse in combination with the speed of light to generate the “off” time of the pulse, is described. In one example, a method of operating a photoconductive switch, which includes two electrodes and a light absorbing material positioned therebetween, includes selecting a value for one or more parameters comprising a voltage for generation of an electric field, a spot size of a laser pulse, a temporal pulse width of the laser pulse, or an intensity of the laser pulse, wherein the selected value(s) for the one or more parameters enable the switch to operate in a region where the light absorbing material exhibits negative differential mobility, and illuminating the light absorbing material with the laser pulse to generate a charge cloud within the light absorbing material.
Voss, Lars F.↗
Design considerations for gallium arsenide pulse compression photoconductive switch
In this paper, we present the physics and design-space exploration of a novel pulse compression photoconductive switch (PCPS) using semi-insulating gallium arsenide (GaAs) operating in the negative differential mobility (NDM) regime of electron transport. We systematically quantify the relationship between the PCPS performance and various design options, including contact separation, laser energy and placement, and trap dynamics. Specifically, we report the full-width at half-maximum and the peak output current generated by the PCPS as a function of applied electrical and optical bias. We discuss the optimal spacing between the electrodes and the distance of the laser spot to the anode to achieve higher electron confinement and superior radio-frequency (RF) metrics. Reducing the laser energy is important to prevent the appearance of secondary peaks due to diffusive transport, but there exists a trade-off between the bandwidth and the maximum current of the PCPS. We also compare the PCPS response with and without trap dynamics and find that the electrostatic screening from the trap-induced space charge is time-independent when the trapping time constant is set larger than the recombination lifetime. Overall, trap dynamics are detrimental to performance, unless the compensation doping scheme to achieve semi-insulating GaAs is carefully selected. Results presented in this paper can be used by experimentalists to fine-tune the PCPS design parameters to meet the specifications of various RF applications. Moreover, our results will provide a strong theoretical basis to the measurements of PCPS devices using GaAs and other NDM materials under investigation.
42 ENGINEERING↗
Spectrally-dependent positive and negative photo-plastic effects in CdZnTe and CdZnTeSe
We studied the Vickers microhardness HV0.025 of CdZnTe and CdZnTeSe samples upon illumination with quasi-monochromatic light with wavelengths ranging between 750 and 1540 nm. We observed that light with a wavelength close to or above the bandgap of the samples results in a positive photo-plastic effect (hardening), and light in the spectral range well below the band gap can lead both to positive or negative effects depending on the parameters of deep levels in the bandgap. We performed measurements of spectrally dependent photoconductivity and compared them with HV0.025. Based on the analysis, we propose a complex qualitative model explaining the spectral dependence of HV0.025 by the charging and neutralization of deep levels by optical transitions between the valence and conduction bands and between the bands and deep levels in the band gap. Tuning of parameters of deep levels could be used to control the sign and magnitude of the photo-plastic effect.
36 MATERIALS SCIENCE↗
Residual-Photoconductivity Spectra in HgTe/CdHgTe Quantum-Well Heterostructures
Residual-photoconductivity spectra (RPS) are studied for HgTe/CdHgTe quantum-well heterostructures of n- and p-type conduction at T = 4.2 K. RPS is shown to be both positive (an increase in the carrier concentration in the quantum well) and negative depending on the illumination wavelength. The RPS maxima in the sample with n-type conduction in general correspond to the RPS minima in the p-type samples and vice versa. It is found for p-type samples that illumination at specific wavelengths leads to the “freezing” of free carriers in the quantum well (QW) but not to a change in the conduction type. This fact indicates the important role of the built-in electric field in the RPS mechanism; this field is “switched-off” upon QW neutralization.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Breakdown characteristics of deep-ultraviolet Al 0.6 Ga 0.4 N p-i-n avalanche photodiodes
A top-illuminated deep-ultraviolet Al 0.6 Ga 0.4 N p-i-n avalanche photodiode (APD) structure was designed and grown by metalorganic chemical vapor deposition on an AlN bulk substrate and on two different quality AlN/sapphire templates, and APDs were fabricated and tested. The APD devices with a circular diameter of 20 μm have demonstrated a distinctive reverse-bias breakdown behavior. The reverse breakdown voltage of the APDs is approximately -140 V, which corresponds to a breakdown electric field of 6–6.2 MV/cm for the Al 0.6 Ga 0.4 N material as estimated by Silvaco TCAD simulation. The APDs grown on the AlN bulk substrate show the lowest leakage current density of < 1 × 10 -8 A/cm 2 (at low reverse bias) compared to that of the devices grown on the AlN templates. From the photocurrent measurement, a maximum gain (current limited) of 1.2 × 10 4 is calculated. The average temperature coefficients of the breakdown voltage are negative for APD devices fabricated from both the AlN bulk substrate and the AlN templates, but these data show that the coefficient is the least negative for the APD devices grown on the low-dislocation-density AlN bulk substrate.
71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
Monte Carlo transport analysis to assess intensity dependent response of a carbon-doped GaN photoconductor
In this report evaluation of the photoresponse in wurtzite GaN photoconductive switches is presented based on kinetic Monte Carlo simulations. The focus is on electron transport physics and assessment of high frequency operation. The roles of GaN band structure, Pauli exclusion, and treatment of internal fields based on the fast multipole method are all comprehensively included. The implementation was validated through comparisons of velocity-field characteristics for GaN with computational results in the literature. Photocurrent widths of less than ~7 ps for the 1 μm device can be expected, which translates into a 100 GHz upper bound. Photocurrent pulse compression below the laser full width at half maxima at high applied fields are predicted based on the interplay of space-charge effects and the negative differential velocity characteristics of GaN.
36 MATERIALS SCIENCE↗