Search NASA⌕ Search

SEARCH · Search NASA

Results for “net expansions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Blood Volume: Its Adaptation to Endurance Training

Expansion of blood volume (hypervolemia) has been well documented in both cross-sectional and longitudinal studies as a consequence of endurance exercise training. Plasma volume expansion can account for nearly all of the exercise-induced hypervolemia up to 2-4 wk; after this time expansion may be distributed equally between plasma and red cell volumes. The exercise stimulus for hypervolemia has both thermal and nonthermal components that increase total circulating plasma levels of electrolytes and proteins. Although protein and fluid shifts from the extravascular to intravascular space may provide a mechanism for rapid hypervolemia immediately after exercise, evidence supports the notion that chronic hypervolemia associated with exercise training represents a net expansion of total body water and solutes. This net increase of body fluids with exercise training is associated with increased water intake and decreased urine volume output. The mechanism of reduced urine output appears to be increased renal tubular reabsorption of sodium through a more sensitive aldosterone action in man. Exercise training-induced hypervolemia appears to be universal among most animal species, although the mechanisms may be quite different. The hypervolemia may provide advantages of greater body fluid for heat dissipation and thermoregulatory stability as well as larger vascular volume and filling pressure for greater cardiac stroke volume and lower heart rates during exercise.

Convertino, Victor A.↗

Reduced-Stress Mounting for Thermocouples

Mounting accommodates widely different coefficients of thermal expansion. In new method, legs of thermocouple placed in separate n- and p-type arrays. Two arrays contact common heat pipe as source but have separate heatpipe sinks. Net expansion (or contraction) taken up by spring mounting on heat-pipe sinks.

Wood, C.↗

Solar wind speed and coronal flux-tube expansion

The hypothesis that the solar wind speed at 1 AU and the rate of magnetic flux-tube expansion in the corona are inversely correlated is shown to be consistent with observations extending over the last 22 years. This empirical relationship allows the daily wind speeds at earth to be predicted from a current-free extrapolation of the observed photospheric field into the corona. The narrow boundaries of high-speed wind streams are attributed to steep gradients in the flux-tube expansion rates at the edges of coronal holes. When a heliospheric current sheet is included in the model, it is found that the flux tubes near the hole axis, although diverging more slowly than those near the hole boundary in the corona, have undergone the greatest net expansion at 1 AU, an effect consistent with the low densities within high-speed streams.

Wang, Y.-M.↗

The origin of the Gum nebula

Obsrvations and theoretical investigations of the Gum nebula (GN) since about 1971 are reviewed. Direct observations of the GN, the Vela X supernova remnant (SNR), the Vela pulsar, and other stars in or near the GN are discussed with those of related phenomena such as the radio loops and known SNRs; the emphasis is on studies of the interstellar absorption lines, the evidence for hot gas in the GN, and the extended diffuse emission. The four basic models proposed for the GN are considered: a fossil Stromgren sphere, an old SNR, an H II region, or a superbubble. The GN physical parameters predicted by each model are listed in a table and compared. A minimum explanation which attributes the 36 x 36-deg filamentary structure and the 125-pc radius structure to the action of the stellar winds from Zeta Pup and Gamma-2 Vel (and perhaps the effect of a Vel X supernova explosion 20,000 years ago) is found most appropriate, at least until the questions of the net expansion rate of the GN (about 20 km/sec or about zero?) and the existence of the diffuse emission beyond the filamentary structure are resolved by observations.

Bruhweiler, F. C.↗

Strutjet Matures to Support Propulsion Needs in the 2000+ World

The Strutjet, Aerojet's Rocket Based Combined Cycle (RBCC) concept, was discussed in a previous ISABE paper as an enabling propulsion concept for single stage to orbit applications. This paper describes the technical progress of the Strutjet since 1996 together with a rationale why RBCC engines in general and the Strutjet in particular, lend themselves uniquely to systems having the ability to expand current space and also open new global "rapid delivery" markets. In particular, the paper substantiates the claims why for certain missions RBCC powered vehicles can be operated at higher margins than all rocket systems, and why within the family of conceivable RBCC systems the Strutjet excels due to its unique architecture and design features. A special emphasis is given to the selection of the engine's ram/scram mode design point because only that mode can add significantly to the mission effective Isp. The thrust produced by an airbreathing engine is directly related to the mass of air processed. This air is captured by the inlet and compressed to raise the pressure for combustion and subsequent expansion. The net accelerating force is the difference between the gross thrust and total vehicle drag (including the spill drag). This total drag is highest at low speeds when the gross thrust is lowest. When the net accelerating force is low, most of the fuel burned is wasted overcoming the vehicle drag. Higher thrust is necessary to perform the mission. One method is to leave the rockets on longer but this results in much higher propellant consumption.

Siebenhaar, A.↗

AXISYMMETRIC, THROTTLEABLE NON-GIMBALLED ROCKET ENGINE

A rocket engine assembly is provided for a vertically launched rocket vehicle. A rocket engine housing of the assembly includes two or more combustion chambers each including an outlet end defining a sonic throat area. A propellant supply for the combustion chambers includes a throttling injector, associated with each of the combustion chambers and located opposite to sonic throat area, which injects the propellant into the associated combustion chamber. A modulator, which may form part of the injector, and which is controlled by a controller, modulates the flow rate of the propellant to the combustion chambers so that the chambers provide a vectorable net thrust. An expansion nozzle or body located downstream of the throat area provides expansion of the combustion gases produced by the combustion chambers so as to increase the net thrust.

Sackheim, Robert L.↗

Main-Sequence CMEs as Magnetic Explosions: Compatibility with Observed Kinematics

We examine the kinematics of 26 CMEs of the morphological main sequence of CMEs, those having the classic three-part bubble structure of (1) a bright front eveloping (2) a dark cavity within which rides (3) a bright blob/filamentary feature. Each CME is observed in Yohkoh/SXT images to originate from near the limb (> or equal to 0.7 R(sub Sun) from disk center). The basic data (from the SOHO LASCO CME Catalog) for the kinematics of each CME are the sequence of LASCO images of the CME, the time of each image, the measured radial distance of the front edge of the CME in each image, and the measured angular extent of the CME. About half of our CMEs (12) occur with a flare, and the rest (14) occur without a flare. While the average linear-fit speed of the flare CMEs (1000 km/s) is twice that of the non-flare CMEs (510 km/s), the flare CMEs and the non-flare CMEs are similar in that some have nearly flat velocity-height (radial extent) profiles (little acceleration), some have noticeably falling velocity profiles (noticeable deceleration), and the rest have velocity profiles that rise considerably through the outer corona (blatant acceleration). This suggests that in addition to sharing similar morphology, main-sequence CMEs all have basically the same driving mechanism. The observed radial progression of each of our 26 CMEs is fit by a simple model magnetic plasmoid that is in pressure balance with the radial magnetic field in the outer corona and that propels itself outward by magnetic expansion, doing no net work on its surroundings. On average over the 26 CMEs, this model fits the observations as well as the assumption of constant acceleration. This is compatible with main-sequence CMEs being magnetically driven, basically magnetic explosions, with the velocity profile in the outer corona being largely dictated by the initial Alfien speed in the CME (when the front is at approx. 3 (sub Sun), analogous to the mass of a main-sequence star dictating the luminosity.

Moore, Ron↗

Pilot model expansion tunnel test flow properties obtained from velocity, pressure, and probe measurements

Velocity-profile, pitot-pressure, and supplemental probe measurements were made at the nozzle exist of an expansion tunnel (a modification to the Langley pilot model expansion tube) for a nozzle net condition of a nitrogen test sample with a velocity of 4.5 km/sec and a density 0.005 times the density of nitrogen at standard conditions, both with the nozzle initially immersed in a helium atmosphere and with the nozzle initially evacuated. The purpose of the report is to present the results of these measurements and some of the physical properties of the nitrogen test sample which can be inferred from the measured results. The main conclusions reached are that: the velocity profiles differ for two nozzle conditions; regions of the flow field can be found where the velocity is uniform to within 5 percent and constant for several hundred microseconds; the velocity of the nitrogen test sample is reduced due to passage through the nozzle; and the velocity profiles do not significantly reflect the large variations which occur in the inferred density profiles.

Friesen, W. J.↗

Preliminary Investigation of an Underwater Ramjet Powered by Compressed Air

Part I contains the results of a preliminary experimental investigation of a particular design of an underwater ramjet or hydroduct powered by compressed air. The hydroduct is a propulsion device in which the energy of an expanding gas imparts additional momentum to a stream of water through mixing. The hydroduct model had a fineness ratio of 5.9, a maximum diameter of 3.2 inches, and a ratio of inlet area to frontal area of 0.32. The model was towed at a depth of 1 inch at forward speeds between 20 and 60 feet per second for airflow rates from 0.1 to 0.3 pound per second. Longitudinal force and pressures at the inlet and in the mixing chamber were determined. The hydroduct produced a positive thrust-minus-drag force at every test speed. The force and pressure coefficients were functions primarily of the ratio of weight airflow to free-stream velocity. The maximum propulsive efficiency based on the net internal thrust and an isothermal expansion of the air was approximately 53 percent at a thrust coefficient of 0.10. The performance of the test model may have been influenced by choking of the exit flow. Part II is a theoretical development of an underwater ramjet using air as "fuel." The basic assumption of the theoretical analysis is that a mixture of water and air can be treated as a compressible gas. More information on the properties of air-water mixtures is required to confirm this assumption or to suggest another approach. A method is suggested from which a more complete theoretical development, with the effects of choking included, may be obtained. An exploratory computation, in which this suggested method was used, indicated that the effect of choked flow on the thrust coefficient was minor.

Mottard, Elmo J.↗

Coupling of solute transport and cell expansion in pea stems

As cells expand and are displaced through the elongation zone of the epicotyl of etiolated pea (Pisum sativum L. var Alaska) seedlings, there is little net dilution of the cell sap, implying a coordination between cell expansion and solute uptake from the phloem. Using [14C] sucrose as a phloem tracer (applied to the hypogeous cotyledons), the pattern of label accumulation along the stem closely matched the growth rate pattern: high accumulation in the growing zone, little accumulation in nongrowing regions. Several results suggest that a major portion of phloem contents enters elongating cells through the symplast. We propose that the coordination between phloem transport and cell expansion is accomplished via regulatory pathways affecting both plasmodesmata conductivity and cell expansion.

NASA Discipline Plant Biology↗

Oscillating-Linear-Drive Vacuum Compressor for CO2

A vacuum compressor has been designed to compress CO2 from approximately equal to 1 psia (approximately equal to 6.9 kPa absolute pressure) to approximately equal to 75 psia (approximately equal to 0.52 MPa), to be insensitive to moisture, to have a long operational life, and to be lightweight, compact, and efficient. The compressor consists mainly of (1) a compression head that includes hydraulic diaphragms, a gas-compression diaphragm, and check valves; and (2) oscillating linear drive that includes a linear motor and a drive spring, through which compression force is applied to the hydraulic diaphragms. The motor is driven at the resonance vibrational frequency of the motor/spring/compression-head system, the compression head acting as a damper that takes energy out of the oscillation. The net effect of the oscillation is to cause cyclic expansion and contraction of the gas-compression diaphragm, and, hence, of the volume bounded by this diaphragm. One-way check valves admit gas into this volume from the low-pressure side during expansion and allow the gas to flow out to the high-pressure side during contraction. Fatigue data and the results of diaphragm stress calculations have been interpreted as signifying that the compressor can be expected to have an operational life of greater than 30 years with a confidence level of 99.9 percent.

Izenson, Michael G.↗

The Thermal Expansion of Ring Particles and the Secular Orbital Evolution of Rings Around Planets and Asteroids

The thermal expansion and contraction of ring particles orbiting a planet or asteroid can cause secular orbit evolution. This effect, called here the thermal expansion effect, depends on ring particles entering and exiting the shadow of the body they orbit. A particle cools off in the shadow and heats up again in the sunshine, suffering thermal contraction and expansion. The changing cross-section it presents to solar radiation pressure plus time lags due to thermal inertia lead to a net along-track force. The effect causes outward drift for rocky particles. For the equatorial orbits considered here, the thermal expansion effect is larger than Poynting-Robertson drag in the inner solar system for particles in the size range approx. 0.001 - 0.02 m. This leads to a net increase in the semimajor axis from the two opposing effects at rates ranging from approx. 0.1 R per million years for Mars to approx. 1 R per million years for Mercury, for distances approx. 2R from the body, where R is the body's radius. Asteroid 243 Ida has approx. 10 R per million years, while a hypothetical Near-Earth Asteroid (NEA) can have faster rates of approx. 0.5 R per thousand years, due chiefly to its small radius compared to the planets. The thermal expansion effect weakens greatly at Jupiter and is overwhelmed by Poynting-Robertson for icy particles orbiting Saturn. Meteoroids in eccentric orbits about the Sun also suffer the thermal expansion effect, but with only approx. 0.0003e2 AU change in semimajor axis over a million years for a 2 m meteoroid orbiting between Mercury and Earth.

Ring particles↗

A comparison of the bonding in Cr(NO)4 and Ni(CO)4

The bonding in Cr(NO)4 is very ionic, with about 1.5 electrons donated from the Cr to the NO 2pi orbitals. There is also a NO sigma donation of about 0.5 electrons to the Cr, yielding a net charge of Cr of about 1. A large MCSCF expansion is needed to describe both the ionic and covalent contributions to the Cr 3d-NO 2pi bonding. This bonding is compared to that in the isoelectronic Ni(CO)4.

Bauschlicher, C. W., Jr.↗

Impact of an Exhaust Throat on Semi-Idealized Rotating Detonation Engine Performance

A computational fluid dynamic (CFD) model of a rotating detonation engine (RDE) is used to examine the impact of an exhaust throat (i.e., a constriction) on performance. The model simulates an RDE which is premixed, adiabatic, inviscid, and which contains an inlet valve that prevents backflow from the high pressure region directly behind the rotating detonation. Performance is assessed in terms of ideal net specific impulse which is computed on the assumption of lossless expansion of the working fluid to the ambient pressure through a notional diverging nozzle section downstream of the throat. Such a semi-idealized analysis, while not real-world, allows the effect of the throat to be examined in isolation from, rather than coupled to (as it actually is) various loss mechanisms. For the single Mach 1.4 flight condition considered, it is found that the addition of a throat can yield a 9.4 percent increase in specific impulse. However, it is also found that when the exit throat restriction gets too small, an unstable type of operation ensues which eventually leads to the detonation failing. This behavior is found to be somewhat mitigated by the addition of an RDE inlet restriction across which there is an aerodynamic loss. Remarkably, this loss is overcome by the benefits of the further exhaust restrictions allowed. The end result is a configuration with a 10.3 percent improvement in ideal net specific thrust.

combustion↗

Impact of an Exhaust Throat on Semi-Idealized Rotating Detonation Engine Performance

A computational fluid dynamic (CFD) model of a rotating detonation engine (RDE) is used to examine the impact of an exhaust throat (i.e. a constriction) on performance. The model simulates an RDE which is premixed, adiabatic, inviscid, and which contains an inlet valve that prevents backflow from the high pressure region directly behind the rotating detonation. Performance is assessed in terms of ideal net specific impulse which is computed on the assumption of lossless expansion of the working fluid to the ambient pressure through a notional diverging nozzle section downstream of the throat. Such a semi-idealized analysis, while not real-world, allows the effect of the throat to be examined in isolation from, rather than coupled to (as it actually is) various loss mechanisms. For the single Mach 1.4 flight condition considered, it is found that the addition of a throat can yield a 9.4 percent increase in specific impulse. However, it is also found that when the exit throat restriction gets too small, an unstable type of operation ensues which eventually leads to the detonation failing. This behavior is found to be somewhat mitigated by the addition of an RDE inlet restriction across which there is an aerodynamic loss. Remarkably, this loss is overcome by the benefits of the further exhaust restrictions allowed. The end result is a configuration with a 10.3 percent improvement in ideal net specific thrust.

propulsion↗

The Effect on Thrust Minus Base Drag of Exchanging Base Area for Nozzle Expansion in Supersonic Nozzles at Transonic Mach Numbers

A wind-tunnel investigation to determine the effect on thrust minus base drag of exchanging base area for nozzle overexpansion on a cylindrical afterbody with a single supersonic nozzle has been conducted a t Mach numbers from 0.9 t o 1.4. The throat-to-base diameter ratio has been varied from 0.320 to 0.550; the jet-to-base diameter ratio has been varied from 0.320 to 1, resulting in a jet Mach number variation of 1.0 to 3.897. The jet total-pressure ratio ranged from 2 to approximately 22. The results indicated that a proper balance between nozzle over-expansion and base area exists, which will produce the maximum afterbody net-thrust factor over a given operating range. For a given Mach number and throat-to-base diameter ratio, the optimum values of jet-to-base diameter ratio corresponding to the peak values of the net-thrust factor are, in general, larger than the values at the jet design pressure ratio and tend to increase with increasing j e t total-pressure ratio in a manner similar to the design values. Also, for given values of throat-to-base diameter ratio and jet total-pressure ratio, the optimum value of jet-to-base diameter ratio changed as the free-stream Mach number was varied from transonic to low supersonic speeds. The magnitude of the changes varied with jet total-pressure ratio and throat-to-base diameter ratio.

Slocumb, Travis H.↗

Extraction of Oxygen from the Martian Atmosphere

A mechanical process was designed for direct extraction of molecular oxygen from the martian atmosphere based on liquefaction of the majority component, CO2, followed by separation of the lower-boiling components. The atmospheric gases are compressed from about 0.007 bar to 13 bar and then cooled to liquefy most of the CO2. The uncondensed gases are further compressed to 30 bar or more, and then cooled again to recover water as ice and to remove much of the remaining CO2. The final gaseous products consisting mostly of nitrogen, oxygen, and carbon monoxide are liquefied and purified by cryogenic distillation. The liquefied CO2 is expanded back to the low-pressure atmosphere with the addition of heat to recover a majority of the compression energy and to produce the needed mechanical work. Energy for the process is needed primarily as heat to drive the CO2-based expansion power system. When properly configured, the extraction process can be a net producer of electricity. The conceptual design, termed 'MARRS' for Mars Atmosphere Resource Recovery System, was based on the NASA/JSC Mars Reference Mission (MRM) requirement for oxygen. This mission requires both liquid oxygen for propellant, and gaseous oxygen as a component of air for the mission crew. With single redundancy both for propellant and crew air, the oxygen requirement for the MRM is estimated at 5.8 kg/hr. The process thermal power needed is about 120 kW, which can be provided at 300-500 C. A lower-cost nuclear reactor made largely of stainless steel could serve as the heat source. The chief development needed for MARRS is an efficient atmospheric compression technology, all other steps being derived from conventional chemical engineering separations. The conceptual design describes an exceptionally low-mass compression system that can be made from ultra-lightweight and deployable structures. This system adapts to the rapidly changing martian environment to supply the atmospheric resource to MARRS at constant conditions.

England, C.↗

Content and Representation of Information Needed to Support Time-Constrained Problem Solving

NASA’s current mission-operations paradigm originated with Project Mercury and endured with minimum evolution through the Apollo Program, Space Shuttle Program, and ISS missions. At its foundation is a near-complete real-time dependence on a ground team to manage the combined state of the mission, vehicle, and crew. Utilizing many engineers and operators with broad and deep expertise; large, distributed datasets including extensive telemetry; and expansive analytical and computing power, this ground team has served as the safety net for crewed spaceflight missions over the past 60 years. This approach must change to address challenges associated with missions beyond low Earth orbit (BLEO), including infrequent resupply, reduced ability to evacuate, and delayed communications that prohibit real-time operational support. We anticipate that a necessary part of this change will be increased independence for the crew, as roles and responsibilities traditionally performed by ground teams move on board the vehicle. While many risks are associated with Earth-independent operations, one particular concern is ensuring that the crew will have adequate onboard support to perform urgent problem solving when communication with the ground is delayed or intermittent. A key resource that enables the ground team to respond to anomalies quickly and effectively is the extraordinary expertise and experience it possesses. It is comprised of 80+ experts on at any given time, with a combined 600+ years of system-specific experience across 22 unique console disciplines. A small crew will face the unprecedented challenge of independently responding to anomalies that have historically been handled by a team 20 times their size. Another important resource upon which the ground heavily relies to support procedure execution and anomaly response is data. The amount of telemetry data that each flight controller monitors is extensive. In addition, as the ground team works to further assess impacts, trouble shoot, identify workarounds, and oversee procedure execution, it accesses and synthesizes engineering and procedure information, as well as system build, test, and configuration documentation. It is not feasible nor useful to put all these data onboard as crews become more Earth independent. Each member of a small Mars mission small crew will have multiple roles beyond monitoring telemetry and data gathering, and multiple roles within anomaly resolution processes, thereby limiting their capacity for copious amounts of information. Moreover, while access is necessary, it alone is insufficient. Information will need to be compiled, refined, and represented appropriately to support the crew’s reduced attention and expertise. This work seeks to understand the content and representation of information needed to support time-constrained problem solving and decision making by the crew without real-time ground support. To build this understanding, we first surveyed the literature, focusing on how expert problem solvers construct and manipulate their mental models. Next, we interviewed expert problem solvers in spaceflight and analogous domains and surveyed industry solutions for data presentation. Finally, we analyzed current spaceflight operations by investigating flight controller anomaly resolution processes during ISS training simulations and real operational events. These methods led to creating a problem-solving framework that details common themes and features of attending to, assessing, analyzing, and acting on problems in complex, time-constrained domains. Using this framework and the results of our analysis, we identified conceptual data representations needed for crew-led problem-solving. Preliminary onboard user interface concepts to meet identified needs will be presented.

anomaly response↗