Search NASA⌕ Search

SEARCH · Search NASA

Results for “nickel phosphides”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

17 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Continuous liquid-phase synthesis of nickel phosphide nanoparticles in a helically coiled tube reactor

The continuous liquid phase synthesis of nickel phosphide (Ni 2 P) nanoparticles was studied in a helically coiled tube (HCT) reactor both in single-phase and two-phase slug flows. The reactants were nickel acetylacetonate and tri-n-octylphosphine (TOP) in a 1-octadecane solvent. For the single-phase mode, various parameters such as reaction temperature, residence time, TOP concentration, and P/Ni ratio were studied. It was found that lower temperatures of 320 and 340 °C resulted in the formation of mixed Ni 12 P 5 and Ni 2 P phases, while a higher temperature of 360 °C gave mostly Ni 2 P, with particle sizes increasing from 28 to 42 nm. Upon varying the contact time between 88 and 340 s at 360 °C, a likely sequence of reaction involved an amorphous phase that was transformed in parallel to Ni, Ni 12 P 5 , and Ni 2 P. When the flow in the HCT was changed to a two-phase slug flow by using N 2 to split the continuous liquid phase into small liquid columns, the product was nearly 100% Ni 2 P and the particle size was as small as 3–4 nm. This was attributed to the enhanced mass transfer in the small liquid columns of the slug flow that led to higher reaction rates. Finally, it is highlighted that the HCT operated in a slug flow is an efficient and continuous method for the fabrication of nanoparticles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Covalent Functionalization of Nickel Phosphide Nanocrystals with Aryl-Diazonium Salts

Covalent functionalization of Ni 2 P nanocrystals was demonstrated using aryl-diazonium salts. Spontaneous adsorption of aryl functional groups was observed, with surface coverages ranging from 20 to 96% depending on the native reactivity of the salt as determined by the aryl substitution pattern. Increased coverage was possible for low reactivity species using a sacrificial reductant. Functionalization was confirmed using thermogravimetric analysis, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy. The structure and energetics of this nanocrystal electrocatalyst system, as a function of ligand coverage, were explored with density functional theory calculations. The Hammett parameter of the surface functional group was found to linearly correlate with the change in Ni and P core-electron binding energies and the nanocrystal's experimentally and computationally determined work function. The electrocatalytic activity and stability of the functionalized nanocrystals for hydrogen evolution were also improved when compared to the unfunctionalized material, but a simple trend based on electrostatics was not evident. Density functional theory was used to understand this discrepancy, revealing that H adsorption energies on the covalently functionalized Ni 2 P also do not follow the electrostatic trend and are predictive descriptors of the experimental results.

14 SOLAR ENERGY↗
DOE OSTI2022

Electron Redistributed S-Doped Nickel Iron Phosphides Derived from One-Step Phosphatization of MOFs for Significantly Boosting Electrochemical Water Splitting

Nonprecious transition metal-organic frameworks (MOFs) are one of the most promising precursors for developing electrocatalysts with high porosity and structural rigidity. This study reports the synthesis of high efficiency electrocatalysts based on S-doped NiFeP. MOF-derived S-doped NiFeP structure is synthesized by a one-step phosphorization process with using S-doped MOFs as the precursor, which is more convenient and environment friendly, and also helps retain the samples’ framework. The oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) performance of the NiFeP catalysts can be improved after partially replacing P by S due to the tunable electronic structure. The optimized CCS-NiFeP-10 reaches a current density of 10 mA cm –2 for OER with an overpotential of 201 mV and outperforms most NiFe-based catalysts. The S doping plays an important role in tuning the ΔG values for intermediates formation in Ni atoms to a suitable value and exhibits a pronouncedly improved the OER performance. CCS-NiFeP-20 sample presents excellent HER performance due to the d-band center downshifting from the Fermi level. When the voltage of the electrolytic cell is 1.50 V, a current density of 10 mA cm –2 can be obtained. This strategy paves the way for designing highly active none-noble metal catalysts.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Revealing Structural Evolution of Nickel Phosphide-Iron Oxide Core–Shell Nanocatalysts in Alkaline Medium for the Oxygen Evolution Reaction

Metal phosphide-containing materials have emerged as a potential candidate of non-precious metal-based catalysts for alkaline oxygen evolution reaction (OER). While it is known that metal phosphide undergoes structural evolution, considerable debate persists regarding the effects of dynamics on the surface activation and morphological stability of the catalysts. In this study, we synthesize NiP x -FeO x core-shell nanocatalysts with an amorphous NiP x core designed for enhanced OER activity. Using ex-situ X-ray absorption spectroscopy, we elucidate the local structural changes as a function of cyclic voltammetry cycles. Our studies suggest that the presence of corner-sharing octahedra in the FeO x shell improves structural rigidity through interlayer cross-linking, thereby inhibiting the diffusion of OH - /H 2 O. Thus, the FeO x shell preserves the amorphous NiP x core from rapid oxidation to Ni 3 (PO 4 ) 2 and Ni(OH) 2 . On the other hand, the incorporation of Ni from the core into the FeO x shell facilitates absorption of hydroxide ions for OER. As a result, the Ni/Fe(OH) x at the surface oxidizes to the active γ-(oxy)hydroxide phase under the applied potentials, promoting OER. This intriguing synergistic behavior holds significance as such synthetic route involving the FeO x shell can be extended to other systems, enabling manipulation of surface adsorption and diffusion of hydroxide ions. These findings also demonstrate that nanomaterials with core-shell morphology can be tuned to leverage the strength of each metallic component for improved electrochemical activities.

25 ENERGY STORAGE↗
DOE OSTI2021

Mechanistic Insights into CO 2 Electroreduction on Ni 2 P: Understanding Its Selectivity toward Multicarbon Products

Recently, nickel phosphides (Ni x P y ) have been reported to enable selective electrochemical formation of multicarbon products (C 3 and C 4 ) via the CO 2 reduction reaction (CO 2 RR); nevertheless, their activities remain low. In order to understand the roots of their high selectivity and low activity and to direct the design of more active Ni x P y -based CO 2 RR catalysts, we investigate the CO 2 RR mechanism on Ni 2 P using density functional theory (DFT) calculations. Iin this work, we reveal that the reaction proceeds through the formate pathway, followed by formaldehyde (H 2 CO*) formation and self-condensation. Moreover, we demonstrate that surface hydride transfer steps, along with surface-mediated C–C coupling, are essential in order to avoid C 1 product formation and boost selectivity toward multicarbon products. In addition, we find that the thermal surface hydride transfer from the surface to the physisorbed CO 2 is one of the key rate-limiting steps, and since it is not electroactive, it cannot be accelerated by applying an overpotential. Finally, our results also show that the hydrogen affinity of the surface and the dynamic surface reconstruction via H adsorption facilitate selective CO 2 reduction and C–C coupling on Ni 2 P. These findings provide an impetus for exploring materials design space to identify the physical principles that govern the thermodynamics of rate-limiting thermal steps in electrocatalytic processes.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Enabling technologies for the continuous electrically driven conversion of CO 2 and water to multi-carbon products at high current densities

Here, we demonstrate greatly improved conversion of CO 2 using a gas diffusion electrode (GDE) with flowing electrolyte configuration for CO 2 gas delivery in combination with a high surface area nickel phosphide electrocatalyst. This configuration achieves 40–50% selectivity for total carbon products over H 2 formation (HER) at total current densities ranging from 50 to 300 mA cm -2 . We developed a soft-templating method using CTAB detergent micelles for synthesis of phase-pure Ni 2 P, achieving a 260-fold larger surface area (BET) and porous sponge-like morphology that produces stable currents. This catalyst produces mainly one C-product, methylglyoxal (MG, C 3 H 4 O 2 ) with 38–47% overall selectivity, the highest reported selectivity for a 12-electron reduction product. The versatile soft-templating method for electrocatalyst synthesis uses low-temperature (185 °C) that is permissive for incorporation of co-catalysts that are otherwise destroyed by the high temperatures used in traditional solid-state synthesis (SSS). The non-porous Ni 2 P-SSS catalyst produces mainly H 2 at these current densities. Achieving these high currents and C/H selectivity benefits from use of hydrophobic polymers as co-catalyst binders (cationic = Nafion, anionic = PFAEM and neutral = PTFE) to improve CO 2 conversion. PFAEM is the better ionomer for the CO 2 RR at high current density, postulated as due to suppressing CO 2 conversion to inactive bicarbonate. Precipitation of the carbon products as a polycarbonate polymer occurs at high currents.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Platinum group metal-free (PGM-free) integrated tandem junction photoelectrochemical (PEC) water splitting devices (Final Technical Report)

This project involves using solar light, a photoabsorber, and a catalyst to split water and produce hydrogen. The Department of Energy (DOE) targets for integrated photoelectrochemical (PEC) cells emphasize cost (electrode cost < $200/m 2 ), performance (> 15% solar to hydrogen (STH) efficiency), and stability (> 6 months electrode lifetime), but most approaches skew toward one specific metric. This project exploited interfacial integration of platinum group metal-free (PGM-free) catalysts on the high performance and high value tandem solar cells to attain or exceed the DOE benchmark STH energy conversion efficiency and durability. This was investigated in two thrusts by developing two PEC devices for direct comparison: the first is a high-performance monolithic device based on state-of-the-art GaInP 2 /GaAs tandem solar cells developed at National Renewable Energy Laboratory (NREL), and the second is a high-value device based on earth-abundant wide band gap photoabsorber materials including oxynitride and hybrid organic-inorganic perovskite (HOIP) coupled with commercial narrow band gap silicon (Si). Both these devices were paired with electrocatalysts developed for this purpose at Rutgers University by adapting them to thin films on the photoabsorbers. These catalysts are based on the hydrogen evolution reaction (HER) catalysts (Ni 5 P 4 ), oxygen evolution reaction (OER) catalysts (LiCo 2 O 4 ) previously developed at Rutgers for high-efficiency electrolyzers. For using the high-performance tandem solar cell and Ni 5 P 4 catalysts, we achieved a durability of > 200 h at a STH efficiency of > 10%. For using the high-value wide band gap single junction solar cells on n + Si, we achieved 0.73 mA/cm 2 at 1.23V vs reversible hydrogen electrode (RHE) and -15.9 mA/cm 2 at 0V vs RHE using the oxynitride- and HOIP-based photoelectrodes, respectively. After comparing their photocurrent densities, we down selected the HOIP photoabsorber to couple Si for fabrication of a tandem photocathode. However, due to the COVID-19 pandemic, both the laboratories at Rutgers and NREL were locked down for three months and reopened only partially in 2020. The HOIP/Si tandem photocathode using robust nickel phosphide thin film catalysts cannot be developed within the project period, which is expected to achieve a STH efficiency of > 20%. Also, the low-cost LiCo 2 O 4 OER catalysts need to replace the benchmark IrO 2 for evaluation. Finally, techonomic analysis of full high-performance and high-value integrated PEC devices needs to be carried out for comparison in terms of cost.

08 HYDROGEN↗
DOE OSTI2020

Mesoporous 3D/2D NiCoP/g-C 3 N 4 Heterostructure with Dual Co–N and Ni–N Bonding States for Boosting Photocatalytic H 2 Production Activity and Stability

The mesoporous 3D/2D NiCoP/g-C 3 N 4 heterostructure is fabricated by embedding NiCoP nanoclusters on the surfaces of g-C 3 N 4 nanosheets, which exhibit more outstanding photocatalytic H 2 production activity than g-C 3 N 4 modified with Pt and other similar phosphides. The highest H 2 production rate over NiCoP/g-C 3 N 4 heterostructures reaches up to about 2.27 times than that of Pt/g-C 3 N 4 under visible light, and meanwhile, the NiCoP/g-C 3 N 4 heterostructure can maintain a continuously stable H 2 production rate during long cyclic running of 15 times in a total of 60 h. Here, the structure and properties investigations reveal that the splendid H 2 production activity and stability derive from the formed dual Co–N and Ni–N bonding states between 3D NiCoP nanoclusters and 2D g-C 3 N 4 nanosheets that can efficiently facilitate the transfer and separation of charge carriers and improve the interaction at heterointerfaces.

36 MATERIALS SCIENCE↗
DOE OSTI2020

High-performance light-driven heterogeneous CO 2 catalysis with near-unity selectivity on metal phosphides

Akin to single-site homogeneous catalysis, a long sought-after goal is to achieve reaction site precision in heterogeneous catalysis for chemical control over patterns of activity, selectivity and stability. Herein, we report on metal phosphides as a class of material capable of realizing these attributes and unlock their potential in solar-driven CO 2 hydrogenation. Selected as an archetype, Ni 12 P 5 affords a structure based upon highly dispersed nickel nanoclusters integrated into a phosphorus lattice that harvest light intensely across the entire solar spectral range. Motivated by its panchromatic absorption and unique linearly bonded nickel-carbonyl-dominated reaction route, Ni 12 P 5 is found to be a photothermal catalyst for the reverse water gas shift reaction, offering a CO production rate of 960 ± 12 mmol g cat –1 h –1 , near 100% selectivity and long-term stability. Successful extension of this idea to Co2P analogs implies that metal phosphide materials are poised as a universal platform for high-rate and highly selective photothermal CO 2 catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Sulfidation and selenidation of nickel nanoparticles

Abstract Transition metal chalcogenide nanoparticles (NPs) are of interest for energy applications, including batteries, supercapacitors, and electrocatalysis. Many methods have been established for synthesizing Ni NPs, and conversion chemistry to form Ni oxide and phosphides from template Ni NPs is well‐understood. Sulfidation and selenidation of Ni NPs have been much less explored, however. We report a method for the conversion of Ni template NPs into sulfide and selenide product NPs using elemental sulfur, 1‐hexadecanthiol, thiourea, trioctylphosphine sulfide, elemental selenium, and selenourea. While maintaining mole ratios of 2 mmol sulfur/selenium precursor: mmol Ni, products with phases of Ni 3 S 2 , Ni 9 S 8 , NiS, NiSO 4 ·6H 2 O, Ni 3 S 4 , Ni 3 Se 2 , and NiSe have been obtained. The products have voids that form through the Kirkendall effect during interdiffusion. Trends relating the chemical properties of the precursors to the phases of the products have been identified. While some precursors contained phosphorus, there was no significant incorporation of phosphorus in any of the products. An increase of the NP size during sulfidation and selenidation is consistent with ripening. The application of Ni sulfide and selenide NPs as electrocatalysts for the hydrogen evolution reaction is also demonstrated.

Lynch, Brian B.↗
DOE OSTI2025

Coupling Amorphization and Compositional Optimization of Ternary Metal Phosphides toward High-Performance Electrocatalytic Hydrogen Production

Amorphous materials, with abundant active sites and unique electronic configurations, have the potential to outperform their crystalline counterparts in high-performance catalysis for clean energy. However, their synthesis and compositional optimization remain underexplored due to the strict conditions required for their formation. Here, in this study, we report the synthesis of ternary platinum-nickel-phosphorus (PtNiP) amorphous nanoparticles (ANPs) within milliseconds by flash Joule heating, which features ultrafast cooling that enables the vitrification of metal precursors. Through compositional optimization, the Gibbs free energy of hydrogen adsorption for Pt 4 Ni 4 P 1 ANPs is optimized at 0.02 eV, an almost ideal value, even surpassing that of the benchmark metallic platinum catalyst. As a result, the PtNiP ANPs exhibited superior activity in electrocatalytic hydrogen evolution in acid electrolyte (η 10 ∼ 14 mV, Tafel slope ∼ 18 mV dec –1 , and mass activity 5× higher than state-of-the-art Pt/C). Life-cycle assessment and technoeconomic analysis suggest that, compared to existing processes, our approach enables notable reductions in greenhouse gas emission, energy consumption, and production cost for practical electrolyzer catalyst manufacturing.

36 MATERIALS SCIENCE↗