Selective nitrogen adsorption via backbonding in a metal–organic framework with exposed vanadium sites
Abstract not provided
Jaramillo, David E. (ORCID:0000000230684963)↗
SEARCH · Search NASA
Results for “nitrogen adsorption”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Pore characterization of the Marcellus Shale by nitrogen adsorption and prediction of its gas storage capacity
In a shale gas reservoir, pore characterization is an important factor used to determine gas storage capacity. However, the nanometer (nm)-scale pore system in shale is difficult to explore by traditional optical, scanning electron microscopy, or even nuclear magnetic resonance well logging. We have investigated the pore structure and storage capacity of the Marcellus Shale through integration of petrophysical analysis from laboratory and well-logging data and nitrogen adsorption. The isotherm of Marcellus Shale is a composite isotherm, which has features of type I, type II, and type IV isotherms with type H4 of the hysteresis loop, suggesting slit-like pores developed in the Marcellus Shale. Quantitative analysis of pore volumes from the nitrogen adsorption indicates that density porosity may be more properly used to approximate the shale porosity and estimate the shale gas volume. In addition, the specific surface area, micropore, and mesopore volumes have a positive relationship with the kerogen volume and total organic content (TOC). By using the Langmuir and Brunauer-Emmet-Teller models, the simulated result indicates that the higher adsorbed quantity of the Marcellus Shale could be the result of the increase of micropore volume contributed, by the increase of kerogen or TOC content. The proposed equations rapidly compute TOC, a key parameter to predict gas storage capacity in overmature shale such as the Marcellus Shale.
Geochemistry & Geophysics↗
Surface parameters of stannic oxide in powder, ceramic and gel forms by nitrogen adsorption techniques.
Surface parameter measurements of stannic oxide in powder, ceramic and gel forms by nitrogen adsorption techniques
CHEMICAL REACTION↗
Surface parameters of stannic oxide in powder, ceramic, and gel form by nitrogen adsorption techniques Interim report
Surface parameters of stannic oxide in powder, ceramic, and gel form by nitrogen adsorption techniques - analysis of adsorption isotherms
ISOTHERM↗
Gel-Derived Amorphous Bismuth–Nickel Alloy Promotes Electrocatalytic Nitrogen Fixation via Optimizing Nitrogen Adsorption and Activation
To achieve the electrochemical nitrogen reduction reaction (NRR) for efficient and sustainable NH 3 production, catalysts should exhibit high selectivity and activity with optimal adsorption energy. Herein we developed a three-dimensional (3D) amorphous BiNi alloy toward a significantly enhanced NRR compared with its crystalline and metal counterparts. Ni alloying enables the chemisorption of nitrogen and the lower fre-energy change for the *NNH formation, and the 3D alloy electrocatalyst exhibits high catalytic activity for NH 3 production with a yield rate of 17.5 μg h -1 mg cat -1 and Faradaic efficiency of 13.8 %. The enhanced electron transfer and increased electrochemical surface area were revealed in the interconnected porous scaffold, affording it sufficiently efficient and stable activity for potential practical applications. Furthermore, this work offers new insights into optimizing the adsorption energy of reactants and intermediates combined with tuning the crystallinity of NRR electrocatalysts.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Gel‐Derived Amorphous Bismuth–Nickel Alloy Promotes Electrocatalytic Nitrogen Fixation via Optimizing Nitrogen Adsorption and Activation
Abstract To achieve the electrochemical nitrogen reduction reaction (NRR) for efficient and sustainable NH 3 production, catalysts should exhibit high selectivity and activity with optimal adsorption energy. Herein we developed a three‐dimensional (3D) amorphous BiNi alloy toward a significantly enhanced NRR compared with its crystalline and metal counterparts. Ni alloying enables the chemisorption of nitrogen and the lower free‐energy change for the *NNH formation, and the 3D alloy electrocatalyst exhibits high catalytic activity for NH 3 production with a yield rate of 17.5 μg h −1 mg cat −1 and Faradaic efficiency of 13.8 %. The enhanced electron transfer and increased electrochemical surface area were revealed in the interconnected porous scaffold, affording it sufficiently efficient and stable activity for potential practical applications. This work offers new insights into optimizing the adsorption energy of reactants and intermediates combined with tuning the crystallinity of NRR electrocatalysts.
Fang, Zhiwei↗
Physical adsorption of nitrogen gas on the polished surface of 347 stainless steel at very low pressures
Physical adsorption of nitrogen gas on polished surface of 347 stainless steel at low pressures
Outlaw, R. A.↗
Measurement of Critical Adsorption of Nitrogen near Its Liquid-vapor Critical Point
The density profile of a critical fluid near a solid surface is expected to show an universal shape. This is known as critical adsorption. The measurement of this effect, especially close to the critical point, is often obscured by gravity. We were able to separate the gravitational effect from critical adsorption by using two capacitors, one with a large gap and one with a small gap of approximately 2 m. Within the uncertainty in the measurement, our data, which ranges between 10(exp -3) to 2 x 10(exp -6) in reduced temperatures, is consistent with the predicted power law dependence. This work is carried out in collaboration with Rafael Garcia, Sarah Scheidemantel and Klaus Knorr. It is funded by NASA's office of Biological and Physical Researchunder.
Chan, Moses↗
Interaction of hydrogen chloride with alumina
The influence of temperature, pressure, and outgas conditions on the absorption of hydrogen chloride and water vapor on both alpha and gamma alumina was studied. Characterization of the adsorbents was performed using X-ray powder diffraction, scanning electron microscopy (SEM), low temperature nitrogen adsorption desorption measurements, BET nitrogen surface area measurements and electron spectroscopy for chemical analysis (ESCA). Water vapor adsorption isotherms at 30, 40, and 50 C were measured on alpha and gamma alumina after outgassing at 80, 200, and 400 C. Both outgas temperature and adsorption temperature influenced the adsorption of water vapor on the aluminas. The water vapor adsorption was completely reversible. Alpha alumina absorbed more water per unit area than gamma alumina. Differences in the adsorption capacity for water vapor of the two aluminas were explained on the basis of ideal surface models of alpha and gamma alumina. Isosteric heats of adsorption for water vapor on the aluminas were determined over a limited range of surface coverage.
Bailey, R. R.↗
A comparative study of silver- and palladium-exchanged zeolites in propylene and nitrogen oxide adsorption and desorption for cold-start applications
Here, silver and palladium ion-exchanged BEA zeolites (Si/Al = 12.5) and silver ion-exchanged ZSM-5 zeolites (Si/Al = 15) were studied for their ability to adsorb and desorb propylene and NO under simulated diesel exhaust conditions. The adsorption experiment results demonstrated the excellent ability of bare BEA zeolites to adsorb propylene, but only a small amount of NO. The presence of H 2 O inhibited the adsorption of both C 3 H 6 and NO. Ion-exchanging BEA zeolites with Ag (1.2 and 5.1 wt.% Ag/BEA) attenuated the inhibiting effect of H 2 O on C 3 H 6 adsorption, while NO storage remained inhibited. Adsorption experiments indicated that C 3 H 6 and NO competed with each other for Pd sites with C 3 H 6 showing stronger adsorption compared to NO, whereas Ag sites preferentially adsorbed C 3 H 6 . DRIFTS data indicated the formation of nitrate, formate and acetate species on Ag and Pd, while C 3 H 6 and NO adsorption was also observed on the zeolite hydroxyl groups in the absence of H 2 O. However, the C 3 H 6 and NO adsorption on the zeolite hydroxyl groups was significantly inhibited in the presence of H 2 O. Additionally, nitrosyl, acrolein and carbonate species were formed over 1.0 wt.% Pd/BEA. The effluent analysis during the temperature-programmed desorption in the DRIFTS reactor revealed that adsorbed C 3 H 6 and NO reacted during the release to form oxidation reaction byproducts. The 1.0 wt.% Pd/BEA zeolite showed the greatest oxidation ability during desorption with the majority of stored C 3 H 6 converted to CO 2 .
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Effect of oxygen and nitrogen interactions on friction of single-crystal silicon carbide
Friction studies were conducted with single-crystal silicon carbide contacting silicon carbide and titanium after having been exposed to oxygen and nitrogen in various forms. After they had been sputter cleaned, the surfaces were (1) exposed to gaseous oxygen and nitrogen (adsorption), (2) ion bombarded with oxygen and nitrogen, or (3) reacted with oxygen (SiC only). Auger emission spectroscopy was used to determine the presence of oxygen and nitrogen. The results indicate that the surfaces of silicon carbide with reacted and ion-bombarded oxygen ions give higher coefficients of friction than do argon sputter-cleaned surfaces. The effects of oxygen on friction may be related to the relative chemical, thermodynamic properties of silicon, carbon, and titanium for oxygen. The adsorbed films of oxygen, nitrogen, and mixed gases of oxygen and nitrogen on sputter-cleaned, oxygen-ion bombarded, and oxygen-reacted surfaces generally reduce friction. Adsorption to silicon carbide is relatively weak.
Miyoshi, K.↗
The interaction of water vapor with a lunar soil, a compacted soil, and a cinder-like rock fragment
A volumetric adsorption system incorporating a pressure gauge was employed to determine nitrogen adsorption and evaluate surface areas. The water adsorption of the lunar samples was measured with the aid of a gravimetric adsorption system including a microbalance. The results obtained in the investigation for the three samples are discussed in detail, giving attention to aspects of dehydroxylation and rehydroxylation.
Cadenhead, D. A.↗
Measuring Multicomponent Adsorption of Tracer Gases on Natural Zeolites
A natural clinoptilolite sample near the Nevada National Security Site was obtained to study adsorption and retardation on gas transport. Of interest is understanding the competition for adsorption sites that may reduce tracer gas adsorption relative to single-component measurements, which may be affected by the multi-scale pore structure of clinoptilolite. Clinoptilolite has three distinct domains of pore size distributions ranging from nanometers to micrometers: micropores with 0.4–0.7 nm diameters, measured on powders by CO2 adsorption at 273 K, representing the zeolite cages; mesopores with 4–200 nm diameters, observed using liquid nitrogen adsorption at 77 K; and macropores with 300–1000 nm diameters, measured by mercury injection on rock chips (~ 100 mesh), likely representing the microfractures. These pore size distributions are consistent with X-ray computed tomography (CT) and focused ion beam scanning electron microscope (FIB-SEM) images, which are used to construct the three-dimensional (3D) pore network to be used in future gas transport modeling. To quantify tracer gas adsorption in this multi-scale pore structure and multicomponent gas species environment, natural zeolite samples initially in equilibrium in air were exposed to a mixture of tracer gases. As the tracer gases diffuse and adsorb in the sample, the remaining tracer gases outside the sample fractionate. Using a quadrupole mass spectrometer to quantify this fractionation, the degree of adsorption of tracer gases in the multicomponent gas environment and multi-scale pore structure is assessed. The major finding is that Kr reaches equilibrium much faster than Xe in the presence of ambient air, which leads to more Kr uptake than Xe over limited exposure periods. When the clinoptilolite chips were exposed to humid air, the adsorption capability decreases significantly for both Xe and Kr with relative humidity (RH) as low as 3%. Both Xe and Kr reaches equilibrium faster at higher RH. The different, unexpected, adsorption behavior for Xe and Kr is due to their kinetic diameters similar to the micropores in clinoptilolite which makes it harder for Xe to access compared to Kr.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
The interaction of acetonitrile with H-terminated and depassivated (100) diamond surfaces
Molecular adsorption on reactive semiconductor surfaces may enable novel surface functionalisation and atomically-precise dopant formation. In this work synchrotron-based x-ray photoelectron spectroscopy and near edge x-ray absorption spectroscopy are used to examine the interaction between acetonitrile and diamond (100) surfaces under ultrahigh vacuum (UHV) conditions. We observe two surface-bound nitrogen species on hydrogen terminated surfaces after thermal depassivation or following synchrotron radiation and subsequent exposure to acetonitrile, but find no evidence of nitrogen adsorption on the hydrogen-terminated diamond surface, at room temperature. Subsequent measurements explore the stability of the surface-bound nitrogen under various temperature conditions and with atmospheric exposure. While the nitrogen coverage achieved in this study is low, this study serves as a proof-of-concept demonstration of a UHV molecular dosing approach to selective nitrogen functionalisation of diamond surfaces as an alternative to plasma-based approaches. This development may be critical for proposed surface-based fabrication workflows using atomic placement of nitrogen-vacancy centres to create quantum devices.
74 ATOMIC AND MOLECULAR PHYSICS↗
Effect of amine type on acidic toxic gas adsorption at ambient conditions on modified CuBTC
We report two amine-modified copper-based Metal Organic Frameworks (MOF (CuBTC)) of different surface chemical and textural features were synthesized and used as adsorbents of acidic toxic gases (NO 2 and H 2 S) in both moist (71% relative humidity (R.H.)) and dry conditions. The initial and exhausted samples were characterized by nitrogen adsorption, powder X-ray diffraction, scanning electron microscopy, thermal gravimetric analysis and Fourier transform infrared spectroscopy. The addition of melamine prevented full growth of CuBTC crystals and resulted in amorphous-like particles with sizes less than 200 nm. The material was non-porous with a small surface area. When urea was used as an amine source, the resulting particles maintained the overall octahedral shape of the parent CuBTC MOF and the material was more porous than the parent MOF. While the urea-modified CuBTC sample performed well as an NO 2 adsorbent in the presence of moisture, the reactivity of the melamine-modified sample and its physical properties provided a favorable environment for the removal of H 2 S. The incorporation of amines into the MOF structure also resulted in surface defects /open copper sites that favored the removal of toxic gases in dry conditions. The reactivity of the adsorbents with toxic gases was demonstrated by the changes in the adsorbent colors, in texture, and in surface chemistry (organic salts, complexes, sulfides and nitrates were formed).
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Group-Additivity–Embedded Multiscale Modeling for Electric Field-Enhanced Nanocatalysis
Elucidating structure-performance relationships remains a central challenge in field-enhanced catalysis, where nanoparticles exhibit nonuniform surface sites with site-dependent responses to electric fields. Low-coordination sites (edges, corners, and tips) are particularly electric field-sensitive (EF), leading to nonuniform charge distribution, adsorption energies, and catalytic activity. Here, using ammonia decomposition on a ruthenium cluster as a model system, we develop a transferable multiscale framework integrating density functional theory, group additivity (GA), Brønsted-Evans-Polanyi scaling, and microkinetic modeling to predict EF-dependent activity across nonuniform cluster sites. Across sites and fields, the nitrogen adsorption energy (E N ) emerges as the governing descriptor, yielding robust volcano relationships whose optimum shifts systematically with field: negative fields strengthen N binding via electron accumulation, while positive fields weaken N binding via charge depletion, moving the optimal E N toward weaker binding. Microkinetic analysis shows that N≡N bond formation remains the key kinetic bottleneck over most conditions; positive fields lower the effective barrier and, critically, increase the fraction of near-optimal active sites, leading to a net enhancement in overall activity relative to zero-field and negative-field cases. By capturing EF- and site-dependent energetics with high accuracy and low computational cost, this GA-embedded multi-scale simulation workflow provides a physically interpretable route to predict and design field-enhanced nanocatalysis.
ammonia decomposition↗
Insights into Controls of Mineralogy and Pore Structure on the Density of Methane Adsorption Phase in Shales under Supercritical Conditions
With gradually increasing enhancing population and industrialization, exploitation of shale gas is enhancing in the world to satisfy the growing demand for energy worldwide. To exploit shale gas efficiently, accurate assessment of shale gas in place (GIP) is necessary for determining production strategies. Unlike free and dissolved gas, adsorbed gas contributes to the shale GIP up to 85% due to the well-developed surface area and micropores. Measured excess adsorption of methane (up to over 95% of subsurface shale gas) is often corrected to absolute adsorption to obtain the actual amount of adsorption under supercritical (or geological) conditions. During the correction, adsorption phase density (APD) is critical. However, the APD of subsurface shale gas and the effects of shale properties (e.g., mineralogy and pore structure) on APD remain poorly understood. A series of high-pressure methane adsorption isotherms (HPMAI) on Caney Shales were collected and analyzed in conjunction with other United States and Chinese shales from the literature at 35–125 °C and up to 15 MPa. Here, a three-layer Ono–Kondo (OK3) model is utilized to derive the temperature- and pressure-dependent APD coupling low-pressure nitrogen adsorption isotherms (LPNAI) and HPMAI. X-ray diffraction and organic geochemistry are combined to reveal the mineralogy. Brunauer–Emmett–Teller, Barrett–Joyner–Halenda, and Horvath–Kawazoe analyses via LPNAI are used to investigate the pore structures. Results show that APD increases with organic matter (OM) proxied by total organic carbon and decreases with clay minerals and the sum of quartz and feldspar. OM dramatically contributes to the APD as multiple-layer adsorption exists, and the APD for OM could be 1.4–8.5 times that for clay minerals. Other inorganic minerals contribute less to APD. The properties and constitution of the surface area instead of the volume fraction contribute to the APD in shales. APD does not show an obvious correlation with micropore volume, likely related to the ratio of micropore volume to the total pore volume. Here, we provide a significant and comprehensive study of petrological factors that impact the APD of subsurface shale gas, which will improve the estimation of supercritical adsorption and shale GIP under reservoir conditions. Also, the findings in this work can provide applications for subsurface carbon dioxide adsorption and storage.
58 GEOSCIENCES↗
Synthesis and Characterization of Silver-Modified Nanoporous Silica Materials for Enhanced Iodine Removal
In aquatic environments, the presence of iodine species, including radioactive isotopes like 129 I and I 2 , poses significant environmental and health concerns. Iodine can enter water resources from various sources, including nuclear accidents, medical procedures, and natural occurrences. To address this issue, the use of natural occurring nanoporous minerals, such as zeolitic materials, for iodine removal will be explored. This study focuses on the adsorption of iodine by silver-modified zeolites (13X-Ag, 5A-Ag, Chabazite-Ag, and Clinoptilolite-Ag) and evaluates their performance under different conditions. All materials were characterized using scanning electron microscopey (SEM), energy-dispersive X-ray spectroscopy (EDS), powdered X-ray diffraction (P-XRD), Fourier-transform infrared spectrometry (FTIR), and nitrogen adsorption studies. The results indicate that Chabazite-Ag exhibited the highest iodine adsorption capacity, with an impressive 769 mg/g, making it a viable option for iodine removal applications. 13X-Ag and 5A-Ag also demonstrated substantial adsorption capacities of 714 mg/g and 556 mg/g, respectively, though their behavior varied according to different models. In contrast, Clinoptilolite-Ag exhibited strong pH-dependent behavior, rendering it less suitable for neutral to slightly acidic conditions. Furthermore, this study explored the impact of ionic strength on iodine adsorption, revealing that Chabazite-Ag is efficient in low-salinity environments with an iodine adsorption capacity of 51.80 mg/g but less effective in saline conditions. 5A-Ag proved to be a versatile option for various water treatments, maintaining its iodine adsorption capacity across different salinity levels. In contrast, Clinoptilolite-Ag exhibited high sensitivity to ionic competition, virtually losing its iodine adsorption ability at a NaCl concentration of 0.1 M. Kinetic studies indicated that the pseudo-second-order model best describes the adsorption process, suggesting chemisorption mechanisms dominate iodine removal. Chabazite-Ag exhibited the highest initial adsorption rate with a k 2 value of 0.002 mg g -1 h -1 , emphasizing its superior adsorption capabilities. Chabazite and Clinoptilolite, naturally occurring minerals, provide eco-friendly solutions for iodine adsorption. Chabazite superior iodine removal highlights its value in critical applications and its potential for addressing pressing environmental challenges.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗