Search NASA⌕ Search

SEARCH · Search NASA

Results for “nitrogen oxides”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Effects of Vegetation on Fluxes of Nitric Oxide, Nitrogen Dioxide, and Nitrous Oxide in a Mixed Deciduous Forest Clearing

Atmosphere-terrestrial exchange of nitrogen oxides, such as nitric oxide (NO), nitrogen dioxide (NO2) and nitrous oxide (N2O), plays an important role in controlling atmospheric composition and the radiative forcing of Earth’s atmosphere. In this study, the impact of vegetation ground cover on NOx (NOx = NO + NO2) and N2O fluxes in a deciduous forest clearing was studied using dynamic flow chambers located on three experimental plots with differing vegetation ground cover. Microbial emissions of NO and N2O were observed throughout the measurement period, while NO2 was exclusively deposited. Vegetation had no observable impact on NO2 deposition. Under dry conditions, total measured nitrogen emissions were numerically similar across all plots, although the N2O:NO ratio was higher for plots containing plants. Vegetation elevates soil water content through enhanced water retention, a condition that favors denitrification and more N2O production, relative to NO. Two rain events induced pulses of NO and N2O that were higher for bare soil compared to the vegetated plots. Lower NO and N2O emissions in plant-containing chambers stemmed from enhanced root uptake of N following rewetting, which diminished the amount of N substrate available for microbial NO and N2O production. The sensitivity of soil N emissions to vegetation ground cover highlights the need for more studies that investigate this effect over a wide range of ecosystems and to include vegetation effects in future parameterizations of soil NOx and N2O used in atmospheric models. This dataset includes processed data collected from 4 dynamic flux chambers and 17 sensors. Data includes ambient gas measurements made 1 m from the surface and soil flux measurements of NO, NO2, N2O, ozone (O3) and carbon dioxide (CO2). Also included is a suite of meteorological (air temperature, humidity, pressure) and soil parameters (water filled pore space, soil temperature). Refer to the readme for more information about each of the data sets.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

A new method for inferring city emissions and lifetimes of nitrogen oxides from high-resolution nitrogen dioxide observations: a model study

We present a new method to infer emissions and lifetimes of nitrogen oxides (NO x ) based on tropospheric nitrogen dioxide (NO 2 ) observations together with reanalysis wind fields for cities located in polluted backgrounds. Since the accuracy of the method is difficult to assess due to lack of “true values” that can be used as a benchmark, we apply the method to synthetic NO 2 observations derived from the NASA-Unified Weather Research and Forecasting (NU-WRF) model at a high horizontal spatial resolution of 4 km × 4 km for cities over the continental United States. We compare the inferred emissions and lifetimes with the values given by the NU-WRF model to evaluate the method. The method is applicable to 26 US cities. The derived results are generally in good agreement with the values given by the model, with the relative differences of 2 % ± 17 % (mean ± standard deviation) and 15 % ± 25 % for lifetimes and emissions, respectively. Our investigation suggests that the use of wind data prior to the satellite overpass time improves the performance of the method. The correlation coefficients between inferred and NU-WRF lifetimes increase from 0.56 to 0.79 and for emissions increase from 0.88 to 0.96 when comparing results based on wind fields sampled simultaneously with satellite observations and averaged over 9 h data prior to satellite observations, respectively. We estimate that uncertainties in NO x lifetime and emissions arising from the method are approximately 15 % and 20 %, respectively, for typical (US) cities. The total uncertainties reach up to 43% (lifetimes) and 45% (emissions) by considering the additional uncertainties associated with satellite NO 2 observations and wind data. We expect this new method to be applicable to NO 2 observations from the TROPOspheric Monitoring Instrument (TROPOMI) and geostationary satellites, such as Geostationary Environment Monitoring Spectrometer (GEMS) or the Tropospheric Emissions: Monitoring Pollution (TEMPO) instrument, to estimate urban NO x emissions and lifetimes globally.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Copper Single Atom-Triggered Niobia–Ceria Catalyst for Efficient Low-Temperature Reduction of Nitrogen Oxides

To reduce nitrogen oxide (NO x ) emission from diesel engines in the cold-start process benefitting the atmospheric environment, catalysts with superior low-temperature NO x removal efficiency are highly demanded. Herein, we report an efficient Nb 2 O 5 /CuO/CeO 2 (NbCuCe) oxide catalyst for the selective catalytic reduction (SCR) of NO x , showing much higher DeNO x activity below 200 °C, superior sulfur resistance, faster response, and much less NH 3 slip than the state-of-the-art Cu-CHA zeolite catalyst. Additionally, atomically dispersed Cu species facilitate the strong interaction between Cu and the Nb/Ce base catalyst, which significantly improves the low-temperature redox properties at Cu–O–Ce sites and NH 3 adsorption/activation at Nb–O–Cu sites, thus contributing to the superior SCR performance of NbCuCe at low temperatures. The developed NbCuCe catalyst is highly promising for efficient DeNO x from cold-start diesel engines and can be coupled with Cu-CHA to achieve a broad operation temperature window.

36 MATERIALS SCIENCE↗
DOE OSTI2020

The impact of nitrogen oxides on electrochemical carbon dioxide reduction

The electroreduction of carbon dioxide offers a promising avenue to produce valuable fuels and chemicals using greenhouse gas carbon dioxide as the carbon feedstock. Because industrial carbon dioxide point sources often contain numerous contaminants, such as nitrogen oxides, understanding the potential impact of contaminants on carbon dioxide electrolysis is crucial for practical applications. Herein, we investigate the impact of various nitrogen oxides, including nitric oxide, nitrogen dioxide, and nitrous oxide, on carbon dioxide electroreduction on three model electrocatalysts (i.e., copper, silver, and tin). We demonstrate that the presence of nitrogen oxides (up to 0.83%) in the carbon dioxide feed leads to a considerable Faradaic efficiency loss in carbon dioxide electroreduction, which is caused by the preferential electroreduction of nitrogen oxides over carbon dioxide. The primary products of nitrogen oxides electroreduction include nitrous oxide, nitrogen, hydroxylamine, and ammonia. Despite the loss in Faradaic efficiency, the electrocatalysts exhibit similar carbon dioxide reduction performances once a pure carbon dioxide feed is restored, indicating a negligible long-term impact of nitrogen oxides on the catalytic properties of the model catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

SCILLA nitrogen oxide (NOx) airborne data

Nitrogen oxides mixing ratios in ppb are measured using a Teledyne API Model T200UP. The analyzer uses chemiluminescence to determine NO concentration. Alternating measurement of the concentrations of total NOx (NO + NO2) and just NO are made by directing the sample through a blue light converter that photolyzes NO2 to NO and bypassing it, respectively, with the NO2 concentration calculated as the difference between the two. Sampled air was pulled from above the Naval Postgraduate School’s (NPS) Twin Otter aircraft through a rear-facing, ¼” OD PFA Teflon tube. The sample stream was split between several other gas analyzers (CO, O3, and H2O) and an oxidation flow reactor. The NO, NO2, and NOx mixing ratios were recorded once per minute.

NOx concentration↗
DOE OSTI2023

Experimental Characterization of Hydrocarbons and Nitrogen Oxides Production in a Heavy-Duty Diesel–Natural Gas Reactivity-Controlled Compression Ignition Engine

Reactivity-Controlled Compression Ignition (RCCI) combustion is considered one of the most promising Low-Temperature Combustion (LTC) concepts aimed at reducing greenhouse gases for the transportation and power generation sectors. Due to the spontaneous combustion of a lean, nearly homogeneous mixture of air and low-reactivity fuel (LRF), ignited through the direct injection of a small quantity of high-reactivity fuel (HRF), RCCI (dual-fuel) shows higher efficiency and lower pollutants compared to conventional diesel combustion (CDC) if run at very advanced injection timing. Even though a HRF is used, the use of advanced injection timing leads to high ignition delays, compared to CDC, and generates high cycle-to-cycle variability, limited operating range, and high pressure rise rates at high loads. This work presents an experimental analysis performed on a heavy-duty single-cylinder compression ignited engine in dual-fuel diesel–natural gas mode. The objective of the present work is to investigate and highlight the correlations between combustion behavior and pollutant emissions, especially unburned hydrocarbons (HC) and oxides of nitrogen (NOx). Based on the analysis of crank-resolved pollutants measurements performed through fast FID and fast NOx systems under different engine operating conditions, two correlations were found demonstrating a good accordance between pollutant production and combustion behavior: Net Cyclic Hydrocarbon emission—cyclic IMEP variations (R 2 = 0.86), and Cyclic NOx—maximum value of the Rate of Heat Released (R 2 = 0.82).

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2024

High-resolution mapping of nitrogen oxide emissions in large US cities from TROPOMI retrievals of tropospheric nitrogen dioxide columns

Satellite-derived spatiotemporal patterns of nitrogen oxide (NOx) emissions can improve accuracy of emission inventories to better support air quality and climate research and policy studies. In this study, we develop a new method by coupling the chemical transport Model-Independent SATellite-derived Emission estimation Algorithm for Mixed-sources (MISATEAM) with a divergence method to map high-resolution NO x emissions across US cities using TROPOspheric Monitoring Instrument (TROPOMI) tropospheric nitrogen dioxide (NO 2 ) retrievals. The accuracy of the coupled method is validated through application to synthetic NO 2 observations from the NASA-Unified Weather Research and Forecasting (NU-WRF) model, with a horizontal spatial resolution of 4 km × 4 km for 33 large and mid-size US cities. Validation reveals excellent agreement between inferred and NU-WRF-provided emission magnitudes (R= 0.99, normalized mean bias, NMB = —0.01) and a consistent spatial pattern when comparing emissions for individual grid cells (R = 0.88 ± 0.06). We then develop a TROPOMI-based database reporting annual emissions for 39 US cities at a horizontal spatial resolution of 0.05° × 0.05° from 2018 to 2021. This database demonstrates a strong correlation (R= 0.90) with the National Emission Inventory (NEI) but reveals some bias (NMB = —0.24). There are noticeable differences in the spatial patterns of emissions in some cities. Our analysis suggests that uncertainties in TROPOMI-based emissions and potential misallocation of emissions and/or missing sources in bottom-up emission inventories both contribute to these differences.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Molecular Understanding of Nitrogen Oxide Fixation of Water-Lean Carbon Capture Solvents by Atomistic Modeling

Nitrogen oxides, present in flue gas, can cause negative impacts on amine carbon capture solvents by the formation of heat-stable salts and suspected carcinogens. Thus, to maximize the performance of water-lean solvents, a better understanding of this process in these systems is necessary. Here, a computational study for the fixation of the CO 2 capture solvent N-(2-ethoxyethyl)-3-morpholinopropan-1-amine (EEMPA) to nitramine/nitrosamine was conducted. The first step involves the dissociation of the NH bond of EEMPA, in which the homolytic mechanism is energetically more favorable than the heterolytic mechanism. The second step involves radical recombination to form N–N bonds. While NO 2 directly reacts with EEMPA, NO has almost no effect. However, in the presence of O 2 , fixation of EEMPA by NO is enhanced via the formation of N 2 O 4 species. Finally, low reaction energies indicate that the formation of nitramine/nitrosamine may be a reversible process, suggesting that EEMPA could be recovered under thermal stripping conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

In-Use Passenger Vessel Emission Rates of Black Carbon and Nitrogen Oxides

This study quantified emission factors of black carbon (BC) and nitrogen oxides (NO x ) from 21 engines on in-use excursion vessels and ferries operating in California's San Francisco Bay, including EPA uncertified and Tier 1-4 engines and across engine operating modes. On average, ~60 fuel-based emission factors per engine were measured using a novel combination of exhaust plume capture combined with GPS location and speed data that can be more readily deployed than common portable emissions measurement systems. Here, BC and NO x emission factors (g kg -1 ) were lowest and least variable during fast cruising and highest during maneuvering and docked operation. Selective catalytic reduction (SCR) reduced NO x emissions by ~80% when functional. However, elevated NO x emissions that exceeded corresponding exhaust standards were measured on most Tier 3 and Tier 4 engines sampled, which can be attributed to inactive SCR during frequent low engine load operation. In contrast, BC emissions exceeded the PM emission standard for only one engine, and SCR systems employed as a NO x reduction technology also reduced emitted BC. Using these measured emission factors to compare commuting options, we show that the CO 2 -equivalent emissions per passenger-kilometer are comparable when commuting by car and ferry, but BC and NO x emissions can be several to more than ten times larger when commuting by ferry.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Preliminary Evidence of Gas-Phase Water Splitting on Holmium Nitrogen Oxide Clusters

Preliminary Evidence of Gas-Phase Water Splitting on Holmium Nitrogen Oxide Clusters Christopher A. Zarzana1, Makayla R. Baxter , Introduction: Molecular hydrogen is a potential energy carrier that could be used to help implement a clean energy economy if it is generated from splitting of water. Improvements in the efficiencies of water-splitting electrolyzers relies on development of novel materials with enhanced performance. However, research in this area is slowed due to underdeveloped understanding of the mechanisms of device performance due to challenges interrogating the fundamental chemical reactions at play in bulk materials. Studies of the intrinsic reactivity of clusters that are representative of the reactive sites of these materials can increase understanding of the fundamental reaction mechanisms involved in hydrogen production, allowing for more efficient development of new water-splitting materials. Methods: Holmium tetranitrato ([Ho(NO3)4]-) clusters were generated in gas-phase using the electrospray ionization source of a Bruker (Billerica, MA, USA) micrOTOF-Q II quadrupole time-of-flight mass spectrometer. Spray solutions consisted of aqueous holmium (Ho) nitrate solutions (at nominally 3 mM) diluted to 30 µM in acetonitrile. The holmium (Ho) tetranitrato clusters were isolated using the quadrupole and were subsequently activated and allowed to react with background water in the collision cell. High resolution, high mass accuracy spectra were recorded using the time-of-flight. Mass accuracy was ensured using external calibration with Agilent (Santa Clara, CA, USA) ESI-L Low Concentration tuning mix. Preliminary data: Collisional activation of the holmium tetranitrato complexes ([Ln(NO3)4]-) resulted in an expected series of ions resulting from the loss of ·NO and ·NO2. This included an ion at m/z = 382.885 assigned as [HoO2(NO3)3]- (theoretical m/z=382.884, error=-1.2 ppm), resulting from loss of ·NO, and an ion at m/z=366.890 assigned as [HoO(NO3)3]- (theorical m/z=366.889, error=-1.8 ppm), resulting from loss of ·NO2. Additional ions were detected that would result from more complicated losses from [Ho(NO3)4]-, including ions at m/z=320.898 assigned as [HoO2(NO3)2]- (theoretical m/z=320.896, error=-4.9 ppm), at m/z=304.904 assigned as [HoO(NO3)2]- (theoretical m/z=304.901, error=-8.1 ppm, very low signal), and at m/z=288.908 assigned as [Ho(NO3)2]- (theoretical m/z=288.907, error=-3.4 ppm). This ion series would arise from loss of some combination of ·NO, ·NO2, and ·NO3, although it is not known whether these losses occur sequentially (e.g. loss of ·NO and ·NO3 to yield [HoO2(NO3)2]-) or as a single species (e.g. direct loss of N2O4). These ions were accompanied by a complementary series representing addition of a single water molecule. This included an ion at m/z=338.908 assigned as [HoO2(NO3)2H2O]- (theoretical m/z=338.907, error=-4.1 ppm), an ion at m/z=322.912 assigned as [HoO(NO3)2H2O]- (theoretical m/z=322.912, error=1.2 ppm), and an ion at m/z=306.918 assigned as [Ho(NO3)2H2O]-, (theoretical m/z=306.918, error=-3.7 ppm). An additional hydrated ion was observed at m/z=276.921 assigned as [HoO2(NO3) H2O]- (theoretical m/z=276.919, error=-7.3 ppm), although corresponding dehydrated ion was not observed. An additional ion was observed at m/z=367.898 that has been assigned as [Ho(NO3)3OH]- (theoretical m/z=367.897, error=-2.5 ppm). It is hypothesized that this ion arises from addition of water to [Ho(NO3)3]- followed by elimination of a hydrogen radical. Neither [Ho(NO3)3]- nor [Ho(NO3)3H2O]- were detected, suggesting that, if the hypothesis is correct, addition of water to [Ho(NO3)3]- and its subsequent splitting is rapid. Elimination of HNO3 from [Ho(NO3)4H2O]- could also yield [Ho(NO3)3OH]-; however, no [Ho(NO3)4H2O]- ions were observed. Novelty: Potential evidence of water splitting on gas-phase lanthanide clusters offers a way to study the intrinsic reactivity of hydrogen-generation materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Decarbonizing nitrogen fertilizer production via the electrochemical nitrogen oxidation reaction

Nitric acid is an important commodity chemical with extensive applications in both agricultural and industrial sectors. However, current production methods involve a combination of the Haber–Bosch and Ostwald processes, which are both energy and carbon emission intensive. The electrochemical nitrogen oxidation reaction (NOR) to produce nitric acid or nitrates shows great potential as an environmentally friendly method for producing fertilizers under mild conditions. The key to progress in this field lies in understanding the fundamental mechanistic insights and establishing robust experimental methods, which is essential for the efficient design and synthesis of electrocatalysts for NOR. Additionally, poor gas mass transport in conventional electrochemical reactors at present lead to lower NOR activity, thereby limiting the progress in this field. In this work, we present a synergistic computational and experimental approach to map out the potential chemical and electrochemical steps and determine the energetics on PtO 2 catalyst to gain mechanistic insights into NOR. Here, this study marks the first attempt to perform NOR in a vapor-fed reactor designed using advanced (additive) manufacturing. The vapor-fed reactor significantly improved the N 2 mass transport to the catalyst, allowing us to report the highest rate for nitrate production to date at 3.3 μmol cm -2 h -1 at 2.01 V vs RHE.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2021

Plasma-catalyst modeling for materials selection: challenges and opportunities in nitrogen oxidation

Reliable kinetic models are essential to rationalize observations and to guide the selection of appropriate plasma-catalyst combinations. Kinetic models coupling plasma- and heterogeneous-catalytic-chemistries, however, are primitive. Here, we combine reduced plasma chemistries and density functional theory parameterized surface reactions to model NO formation from N2 oxidation, an alternative nitrogen fixation process. We first show plasma excited species can enhance turnover frequencies of both Pt and Au. The enhancing potential is a function of plasma species and their densities. We then compare NO production between plasma/Pt and plasma/Au with an integral reactor model and explore the dependence of NO production as a function of plasma conditions, reactor configurations and chemical compositions. Plasma/Pt generates more NO than plasma/Au under most thermal and plasma parametric conditions. Plasma/Au outperforms plasma/Pt under high plasma excitations at low temperatures. Furthermore, these results highlight that selection of plasma-catalyst combinations should consider the properties of plasmas, materials and the coupling of the two.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Zeolite-promoted platinum catalyst for efficient reduction of nitrogen oxides with hydrogen

Internal combustion engine fueled by carbon-free hydrogen (H 2 -ICE) offers a promising alternative for sustainable transportation. Herein, we report a facile and universal strategy through the physical mixing of Pt catalyst with zeolites to significantly improve the catalytic performance in the selective catalytic reduction of nitrogen oxides (NO x ) with H 2 (H 2 -SCR), a process aiming at NO x removal from H 2 -ICE. Via the physical mixing of Pt/TiO 2 with Y zeolite (Pt/TiO 2 + Y), a remarkable enhancement of NO x reduction activity and N 2 selectivity was simultaneously achieved. The incorporation of Y zeolite effectively captured the in-situ generated water, fostering a water-rich environment surrounding the Pt active sites. This environment weakened the NO adsorption while concurrently promoting the H 2 activation, leading to the strikingly elevated H 2 -SCR activity and N 2 selectivity on Pt/TiO 2 + Y catalyst. This study provides a unique, easy and sustainable physical mixing approach to achieve proficient heterogeneous catalysis for environmental applications.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Overcoming fundamental challenges of the electrochemical nitrogen oxidation reaction

Nitric acid and nitrates play a crucial role in modern agriculture and medicine; however, their commercial production through the Haber–Bosch and Ostwald processes is energy-intensive and generates significant greenhouse gas emissions. Additionally, the rapidly growing global population is expected to significantly increase food demand in the coming decades. Therefore, there is a pressing need to explore sustainable alternatives for synthetic fertilizer production to meet increasing global crop demands while reducing the carbon footprint. The electrochemical nitrogen oxidation reaction (NOR) presents a viable alternative which produces nitrates using renewable electricity. However, NOR is still a nascent reaction that has not been studied extensively, and several key challenges must be addressed as the field develops. In this feature article review, we highlight the set of effective approaches that we have employed for studying this complex reaction and overcoming these challenges, as well as discuss future directions for advancing NOR technology.

Energy - Conversion↗
DOE OSTI2022

Observation and rationalization of nitrogen oxidation enabled only by coupled plasma and catalyst

Abstract Heterogeneous catalysts coupled with non-thermal plasmas (NTP) are known to achieve reaction yields that exceed the contributions of the individual components. Rationalization of the enhancing potential of catalysts, however, remains challenging because the background contributions from NTP or catalysts are often non-negligible. Here, we first demonstrate platinum (Pt)-catalyzed nitrogen (N 2 ) oxidation in a radio frequency plasma afterglow at conditions at which neither catalyst nor plasma alone produces significant concentrations of nitric oxide (NO). We then develop reactor models based on reduced NTP- and surface-microkinetic mechanisms to identify the features of each that lead to the synergy between NTP and Pt. At experimental conditions, NTP and thermal catalytic NO production are suppressed by radical reactions and high N 2 dissociation barrier, respectively. Pt catalyzes NTP-generated radicals and vibrationally excited molecules to produce NO. The model construction further illustrates that the optimization of productivity and energy efficiency involves tuning of plasma species, catalysts properties, and the reactor configurations to couple plasma and catalysts. These results provide unambiguous evidence of synergism between plasma and catalyst, the origins of that synergy for N 2 oxidation, and a modeling approach to guide material selection and system optimization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Assessment of sulfur trioxide formation due to enhanced interaction of nitrogen oxides and sulfur oxides in pressurized oxy-combustion

Pressurized oxy-combustion is emerging to be one of the best technologies for significantly decreasing the energy penalty for CO 2 capture in coal-fired power plants. However, the higher pressure boosts the formation of acid gases, including SO 3 and NO 2 , which could increase the risk of corrosion. The synergistic promotion of SO 3 and NO 2 formation in pressurized oxy-combustion is kinetically evaluated under representative conditions (1 ~ 30 atm, 600 ~ 1200 °C, NO/SO 2 = 0.1 ~ 5). We begin with a comprehensive mechanism (72 species and 428 reactions), covering nitrogen and sulfur chemistry, relying on GRI-Mech 3.0. This analysis shows that the interaction of SO X and NO X enhances the conversion rates of SO 2 → SO 3 , and this effect is more apparent at elevated pressures and lower temperatures. Mechanism analyses indicate that at elevated pressures, the formation pathways of SO 3 through HOSO 2 + O 2 = SO 3 + HO 2 , and NO 2 through HO 2 + NO = NO 2 + OH, are promoted due to the strong interaction between SO X and NO X . The intermediate between these two reactions is SO 2 + OH + M = HOSO 2 + M, resulting in a strong cycle, that can be expressed by the global reaction NO + SO 2 + O 2 = NO 2 + SO 3 . Finally, a nine-step reduced chemistry is developed and validated to accurately predict the formation of SO 3 in the post-flame region at elevated pressures.

42 ENGINEERING↗
DOE OSTI2023

Silica modulated palladium catalyst with superior activity for the selective catalytic reduction of nitrogen oxides with hydrogen

A significant promotion effect of colloidal SiO 2 on Pd/TiO 2 catalyst for improving the activity and N 2 selectivity in the selective catalytic reduction of NO with H 2 (H 2 -SCR) was reported, both before and after hydrothermal aging. The SiO 2 addition not only benefited the formation of more oxygen vacancies but also increased Pd dispersion and created rich Pd-SiO 2 interfaces on Pd-SiO 2 /TiO 2 catalyst. The H 2 -SCR of NO on both Pd/TiO 2 and Pd-SiO 2 /TiO 2 followed a Langmuir-Hinshelwood mechanism, in which the adsorbed bridging bidentate nitrates on TiO 2 could react with dissociated H 2 species on Pd sites at Pd-TiO 2 interface. Particularly, on the promoted Pd-SiO 2 /TiO 2 , the Pd-TiO 2 interface could facilitate NO adsorption and activation, and the created Pd-SiO 2 interface could benefit H 2 adsorption and dissociation, thus contributing to its significantly improved H 2 -SCR activity. Additionally, the active Pd species (which should be Pd0 under reaction condition with higher surface concentration) within Pd-SiO 2 /TiO 2 could be well stabilized during long-term hydrothermal aging process through the formation of rich Pd-SiO 2 interfaces.

36 MATERIALS SCIENCE↗