Search NASA⌕ Search

SEARCH · Search NASA

Results for “nonconforming”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2016

The NonConforming Virtual Element Method for the Stokes Equations

In this paper, we present the nonconforming virtual element method (VEM) for the numerical approximation of velocity and pressure in the steady Stokes problem. The pressure is approximated using discontinuous piecewise polynomials, while each component of the velocity is approximated using the nonconforming virtual element space. On each mesh element the local virtual space contains the space of polynomials of up to a given degree, plus suitable nonpolynomial functions. The virtual element functions are implicitly defined as the solution of local Poisson problems with polynomial Neumann boundary conditions. As typical in VEM approaches, the explicit evaluation of the non-polynomial functions is not required. This approach makes it possible to construct nonconforming (virtual) spaces for any polynomial degree regardless of the parity, for two- and three-dimensional problems, and for meshes with very general polygonal and polyhedral elements. We show that the nonconforming VEM is inf-sup stable and establish optimal a priori error estimates for the velocity and pressure approximations. Finally, numerical examples confirm the convergence analysis and the effectiveness of the method in providing high-order accurate approximations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2019

The nonconforming Virtual Element Method for eigenvalue problems

In this work, we analyse the nonconforming Virtual Element Method (VEM) for the approximation of elliptic eigenvalue problems. The nonconforming VEM allows to treat in the same formulation the two- and three-dimensional case. We present two possible formulations of the discrete problem, derived respectively by the nonstabilized and stabilized approximation of the $L^2$-inner product, and we study the convergence properties of the corresponding discrete eigenvalue problem. The proposed schemes provide a correct approximation of the spectrum, in particular we prove optimal-order error estimates for the eigenfunctions and the usual double order of convergence of the eigenvalues. Finally we show a large set of numerical tests supporting the theoretical results, including a comparison with the conforming Virtual Element choice.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2018

The fully nonconforming virtual element method for biharmonic problems

Here in this paper, we address the numerical approximation of linear fourth-order elliptic problems on polygonal meshes. In particular, we present a novel nonconforming virtual element discretization of arbitrary order of accuracy for biharmonic problems. The approximation space is made of possibly discontinuous functions, thus giving rise to the fully nonconforming virtual element method. We derive optimal error estimates in a suitable (broken) energy norm and present numerical results to assess the validity of the theoretical estimates.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2018

The nonconforming virtual element method for eigenvalue problems

We analyse the nonconforming Virtual Element Method (VEM) for the approximation of elliptic eigenvalue problems. The nonconforming VEM allow to treat in the same formulation the two- and three-dimensional case.We present two possible formulations of the discrete problem, derived respectively by the nonstabilized and stabilized approximation of the L 2 -inner product, and we study the convergence properties of the corresponding discrete eigenvalue problems. The proposed schemes provide a correct approximation of the spectrum and we prove optimal-order error estimates for the eigenfunctions and the usual double order of convergence of the eigenvalues. Finally we show a large set of numerical tests supporting the theoretical results, including a comparison with the conforming Virtual Element choice.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

hr-Adaptivity for nonconforming high-order meshes with the target matrix optimization paradigm

In this study, we present an \(hr\) -adaptivity framework for optimization of high-order meshes. This work extends the r -adaptivity method by Dobrev et al. (Comput Fluids, 2020), where we utilized the Target-Matrix Optimization Paradigm (TMOP) to minimize a functional that depends on each element’s current and target geometric parameters: element aspect-ratio , size , skew , and rotation . Since fixed mesh topology limits the ability to achieve the target size and aspect-ratio at each position, in this paper, we augment the r -adaptivity framework with nonconforming adaptive mesh refinement to further reduce the error with respect to the target geometric parameters. The proposed formulation, referred to as \(hr\) -adaptivity, introduces TMOP-based quality estimators to satisfy the aspect-ratio target via anisotropic refinements and size target via isotropic refinements in each element of the mesh. The methodology presented is purely algebraic, extends to both simplices and hexahedra/quadrilaterals of any order, and supports nonconforming isotropic and anisotropic refinements in 2D and 3D. Using a problem with a known exact solution, we demonstrate the effectiveness of \(hr\) -adaptivity over both r - and \(h\) -adaptivity in obtaining similar accuracy in the solution with significantly fewer mesh nodes. We also present several examples that show that \(hr\) -adaptivity can help satisfy geometric targets even when \(r\) -adaptivity fails to do so, due to the topology of the initial mesh.

42 ENGINEERING↗
DOE OSTI2018

SUPG stabilization for the nonconforming virtual element method for advection–diffusion–reaction equations

We present here the design, convergence analysis and numerical investigations of the nonconforming virtual element method with Streamline Upwind/Petrov–Galerkin (VEM-SUPG) stabilization for the numerical resolution of convection–diffusion–reaction problems in the convective-dominated regime. According to the virtual discretization approach, the bilinear form is split as the sum of a consistency and a stability term. The consistency term is given by substituting the functions of the virtual space and their gradients with their polynomial projection in each term of the bilinear form (including the SUPG stabilization term). Polynomial projections can be computed exactly from the degrees of freedom. The stability term is also built from the degrees of freedom by ensuring the correct scalability properties with respect to the mesh size and the equation coefficients. The nonconforming formulation relaxes the continuity conditions at cell interfaces and a weaker regularity condition is considered involving polynomial moments of the solution jumps at cell interface. Optimal convergence properties of the method are proved in a suitable norm, which includes contribution from the advective stabilization terms. Experimental results confirm the theoretical convergence rates.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2026

A cell-centered AMR-ALE framework for 3D multi-material hydrodynamics. Part II: linesweep ALE rezoning for nonconformal block-structured AMR meshes

The simulation of flows presenting contact discontinuities, vorticity, and large variations in spatial scales can be performed in a framework coupling Arbitrary Lagrangian Eulerian (ALE) algorithms and Adaptive Mesh Refinement (AMR). This coupling requires adaptation of ALE rezoning techniques to meshes containing nonconformal nodes arising from both the AMR topology and the junction of mesh blocks. Here, in this paper, we present an ALE rezoning strategy that is compatible with such meshes, and that can also act as a disentangling algorithm. Emphasis is put on an algorithm that respects intrinsic Lagrangian mesh properties in order to preserve accuracy around discontinuities. To that end, we adapt the weighted linesweep algorithm to nonconformal block-structured AMR meshes. Then, we present control parameters introduced in the method for it to be applicable in practical situations. Notably, the method is coupled to a specific metric optimization in order to palliate some shortcomings of the linesweep method. Finally, numerical test cases are presented that feature the capabilities of the ALE-AMR algorithm for flows that present discontinuities, vorticity, and a variety of scales. Notably, we show that our ALE-AMR algorithm gives results at least similar to Euler-AMR, but provides better accuracy in cases where discontinuities are involved, thanks to a method that respects the Lagrangian features of the mesh. Additionally, it enables Euler-AMR-like computations on domains with temporally varying domain boundaries.

Adaptive mesh refinement↗
DOE OSTI2023

Novel features of attractors and transseries in nonconformal Bjorken flows

In this work we investigate the impact of conformal symmetry breaking on hydrodynamization of a far-from-equilibrium fluid. We find a new kind of transseries solutions for the nonconformal hydrodynamic equations of a longitudinal boost invariant expanding plasma. The new transseries solutions unveil a rich physical structure which arises due to the interplay of different physical scales. In the perfect fluid case the nonconformal speed of sound slows down the cooling of the temperature due to the emergence of logarithmic corrections that depends on the mass of the particle. Further, these terms propagate into the perturbative and nonperturbative sectors of the transseries once viscous corrections are included. The logarithmic mass contributions increase the asymptotic value of the Knudsen number while decreasing the damping rate of the transient nonhydrodynamic modes and thus, yielding to an extremely slow hydrodynamization process where flow lines merge to their forward attractor at extremely late times. The early time free streaming expansion is modified and receives logarithmic mass corrections induced by the shear-bulk couplings. The global flow structure and numerical analyses carried out in our work demonstrate the existence of local attraction at early and late times for the shear viscous tensor and bulk viscous pressure.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

A Condensed Constrained Nonconforming Mortar-Based Approach for Preconditioning Finite Element Discretization Problems

This paper presents and studies an approach for constructing auxiliary space preconditioners for finite element problems using a constrained nonconforming reformulation that is based on a proposed modified version of the mortar method. The well-known mortar finite element discretization method is modified to admit a local structure, providing an element-by-element or subdomain-by-subdomain assembly property. This is achieved via the introduction of additional trace finite element spaces and degrees of freedom (unknowns) associated with the interfaces between adjacent elements or subdomains. The resulting nonconforming formulation and a reduced-via-static-condensation Schur complement form on the interfaces are used in the construction of auxiliary space preconditioners for a given conforming finite element discretization problem. Overall, the properties of these preconditioners are studied and their performance is illustrated on model second order scalar elliptic problems utilizing high order elements.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2018

Design, analysis and preliminary numerical results for the nonconforming VEM for parabolic problems

The virtual element method (VEM) is a numerical methodology for solving partial differential equations on unstructured polytopal meshes. In this work, we extend the nonconforming high-order formulation suitable to time-dependent diffusion problems with possibly nonlinear forcing terms. Coupling high-order virtual element formulations in space with time-marching schemes based on Backward Differention Formulas (BDFs) makes a fully discrete method with optimal order of convergence in the Method of Lines framework. We investigate and assess the performance of the method through theoretical analysis and a set of numerical experiments.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2018

Superconvergence analysis for nonlinear parabolic equation with EQ{sub 1}{sup rot} nonconforming finite element

EQ{sub 1}{sup rot} nonconforming finite element method (FEM) applied to a class of nonlinear parabolic equation is discussed. First, by use of two typical characters of this element (one is that the associated FE interpolation operator is identical to its traditional Ritz projection operator; the other is that the consistency error is of order O(h{sup 2}), one order higher than the interpolation error, when the exact solution of the problems belongs to H{sup 3}(Ω)), the supercloseness of order O(h{sup 2}) in broken H{sup 1}-norm for semi-discrete scheme is obtained without the boundedness of numerical solution in L{sup ∞}-norm through splitting the numerical solution into several parts. Moreover, we get the desired result with requirement of u,u{sub t}∈H{sup 3}(Ω) only. Secondly, a linearized Crank–Nicolson fully discrete scheme is proposed and the superclose property of order O(h{sup 2}+τ{sup 2}) is derived by constructing a suitable auxiliary problem. Finally, a numerical example is carried out to confirm our theoretical analysis. Here, h is the subdivision parameter and τ is the time step.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2016

Conforming and nonconforming virtual element methods for elliptic problems

Here we present, in a unified framework, new conforming and nonconforming virtual element methods for general second-order elliptic problems in two and three dimensions. The differential operator is split into its symmetric and nonsymmetric parts and conditions for stability and accuracy on their discrete counterparts are established. These conditions are shown to lead to optimal H 1 - and L 2 -error estimates, confirmed by numerical experiments on a set of polygonal meshes. The accuracy of the numerical approximation provided by the two methods is shown to be comparable.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2019

Nonconforming Mesh Refinement for High-Order Finite Elements

In this study, we propose a general algorithm for nonconforming adaptive mesh refinement (AMR) of unstructured meshes in high-order finite element codes. Our focus is on $h$-refinement with a fixed polynomial order. The algorithm handles triangular, quadrilateral, hexahedral, and prismatic meshes of arbitrarily high-order curvature, for any order finite element space in the de Rham sequence. We present a flexible data structure for meshes with hanging nodes and a general procedure to construct the conforming interpolation operator, both in serial and in parallel. The algorithm and data structure allow anisotropic refinement of tensor product elements in two and three dimensions and support unlimited refinement ratios of adjacent elements. We report numerical experiments verifying the correctness of the algorithms and perform a parallel scaling study to show that we can adapt meshes containing billions of elements and run efficiently on 393,000 parallel tasks. Finally, we illustrate the integration of dynamic AMR into a high-order Lagrangian hydrodynamics solver.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Responses to Nonconformances, AIHA Onsite Assessment August 29-31, 2022

A nonconformance report (NCR) was not generated to document the original Beryllium (Be) positive result being changed to negative due to an oversight by the lab. The sample was re-analyzed on the Agilent ICP-OES which includes software to deal with interferences and resulted in a negative for Be. In order to determine the cause of the false positive, which was originally thought to be due to the Titanium interference in the sample, the laboratory analyzed a blank and a reporting limit standard with 5 ppm and 10 ppm of Titanium added in. These were analyzed on the Perkin Elmer ICP 5 instrument to see if the positive Be was reproducible.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Nonconformance Report Coordinators (NCRCs) Training Course #57109 [Slides]

This course applies to persons performing work under P-330-6, Nonconformance Control and Reporting(NCR), who will be assigned the NCR Coordinator role. Upon completion of the course, employees will have a clear understanding of the unique role and responsibilities of an NCR Coordinator during the Initiation, Investigation and Closure Processes.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗
DOE OSTI2023

Nonconformance Control & Reporting Owning Managers (NCR OMS): Training Course #58013

This course applies to persons performing work under P330-6, Nonconformance Control and Reporting (NCR), who will be assigned the NCR Owning Manager role. Upon completion of the course, employees will have a clear understanding of the unique role and responsibilities of an NCR Manager during the Initiation, Investigation, Disposition and Closure Processes.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗