Search NASA⌕ Search

SEARCH · Search NASA

Results for “nonlinear characterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Nonlinear Characterization of a Joint Exhibiting a Reduction in Damping at High Energy

Even with the advent of additive manufacturing, the vast majority of complex structures are comprised of individual components held together with bolted joints. However, bolted joints present a challenge for mechanical design as they are a source of nonlinearity and increase the uncertainty in the overall behavior of the system in a dynamic environment. While many advances have been made in the ability to accurately model and test bolted joints, it is still an open area of research. Modes of vibration that exercise bolted joints typically exhibit nonlinear behavior where, with increased excitation level, the natural frequency decreases (i.e. softens) and the damping increases. However, the system under study for this work has an axial mode which does not follow this trend; it does soften as expected, but, after an initial increase, the apparent damping decreases with excitation amplitude. At the highest excitation level, the frequency of the mode decreases to that of a nearby bending mode and the response is amplified nearly 500% above that at lower levels. It is unclear whether the decrease in damping is due to the coupling of the two modes or if it is a characteristic of the axial mode. Therefore, the objective of this project is to investigate the coupling between the axial and bending modes and the dynamics leading to the decrease in damping.

42 ENGINEERING↗
DOE OSTI2021

Effectiveness and nonlinear characterization of vibro-impact energy harvesting absorbers in controlling base-excited systems

In this study, model derivations are carried out of a dynamical system under base excitations with a piezoelectric energy harvesting absorber as the tuned-mass-damper. Additionally, amplitude stoppers are included to the absorber in order to create a broadband resonant response, increasing the window of operational use for energy harvesting and system's control. This study is unique in the fact that the energy harvester is coupled to the source of its excitation. A nonlinear reduced-order model is developed using Euler–Lagrange principle and the Galerkin method to accurately estimate the energy harvesting absorber's displacement, harvested power, and the oscillating response of the primary structure. The nonlinear interaction of the energy harvesting absorber and the amplitude stoppers are the focus of this study, where an in-depth investigation of bifurcation points of the primary structure and energy harvesting absorber responses is performed. Due to a transfer of energy between the primary structure and the absorber, it is shown that a soft stopper with stiffness $5 \times {10^3}\,{\text{N}}\;{{\text{m}}^{ - 1}}\,$ has great control of the primary structure with 60% of the uncontrolled amplitude being reduced, as well as an increase of the harvested energy. Medium stoppers with small initial gaps size and hard stoppers do not control the primary structure and show a decrease in the energy harvesting capabilities due to the activation of the nonlinear contact-impact interactions. Finally, these stoppers also generate aperiodic regions due to the possible presence of grazing bifurcations.

36 MATERIALS SCIENCE↗
NASA NTRS1984

A nonlinear viscoelastic characterization of graphite/epoxy composites

A nonlinear viscoelastic model based on the procedure of Findley et al., (1948) has been used to accurately represent the creep of several graphite/epoxy composites. Applying this approach to unidirectional 0, 90 and 10 deg off-axis tensile specimens, the viscoelastic response of a lamina can be characterized. The resulting lamina model has been useful for representing the behavior of a lamina in a numerical procedure to predict creep and delayed failures of general laminates. Also, independently, the Findley procedure has been used to characterize the nonlinear viscoelastic behavior of general laminates.

Dillard, D. A.↗
NASA NTRS1995

Nonlinear viscoelastic characterization of polymer materials using a dynamic-mechanical methodology

Polymer materials retrieved from LDEF exhibit nonlinear constitutive behavior; thus the authors present a method to characterize nonlinear viscoelastic behavior using measurements from dynamic (oscillatory) mechanical tests. Frequency-derived measurements are transformed into time-domain properties providing the capability to predict long term material performance without a lengthy experimentation program. Results are presented for thin-film high-performance polymer materials used in the fabrication of high-altitude scientific balloons. Predictions based upon a linear test and analysis approach are shown to deteriorate for moderate to high stress levels expected for extended applications. Tests verify that nonlinear viscoelastic response is induced by large stresses. Hence, an approach is developed in which the stress-dependent behavior is examined in a manner analogous to modeling temperature-dependent behavior with time-temperature correspondence and superposition principles. The development leads to time-stress correspondence and superposition of measurements obtained through dynamic mechanical tests. Predictions of material behavior using measurements based upon linear and nonlinear approaches are compared with experimental results obtained from traditional creep tests. Excellent agreement is shown for the nonlinear model.

Strganac, Thomas W.↗
DOE OSTI2022

Characterization of nonlinear ultrasonic waves behavior while interacting with poor interlayer bonds in large-scale additive manufactured materials

Over the past decades, researchers have developed several nonlinear ultrasonic techniques for quality control of materials commonly used in different applications. Owing to the superior sensitivity of nonlinear ultrasound waves to small defects such as micro-cracks, their applicability in different nondestructive testing (NDT) problems has been investigated in numerous studies. These studies utilize frequency domain analysis to detect the generation of higher harmonics because of the formation of defects in the inspected medium. Frequency domain analysis based on the Fourier transform is a significant approach used in linear systems; however, it may not perform adequately on nonlinear systems. Hence, studies on nonlinear dynamics and physics consider analyzing systems' behavior in the phase-space domain. In contrast to the frequency domain analysis, which can result in information loss, analysis in the phase-space domain retains all the information regarding a system's states. Here, we investigate the nonlinearities induced by poor interlayer bonding in polymer-based additive manufactured parts in the phase-space domain. It is convenient to characterize the nonlinearity in the phase-space domain because it provides a geometrical representation of a system's states. Two types of low quality interlayer bond are considered. The first type is simulated artificially while the second type is manufactured by reducing the bond quality during the printing process. The analysis verified that the received ultrasonic signals exhibit classical nonlinear behavior in the phase-space domain while interacting with simulated poor interlayer bonds. In addition, the results showed that the behavior of ultrasonic waves is amplitude-dependent and evolves into models that have not been previously reported. Furthermore, Largest Lyapunov Exponent (LLE) is used to quantify the behavior of nonlinear ultrasonic waves while interacting with poor interlayer bonds. Using LLE, it was observed that the divergence rate of the phase-space trajectories depends on the amplitude of the excitation. This observation quantitatively proves that nonlinear behavior of ultrasound while interacting with poor interlayer bonds can be amplitude-dependent. The results of both simulated and inherent poor interlayer bond cases showed that LLE can be used as a reliable quantitative damage-sensitive feature to detect and potentially characterize weak bonds, which are difficult to detect using conventional approaches. Additionally, the reported results in the phase-space domain provide a basis for proposing a new mathematical model for ultrasonic waves interacting with poor interlayer bonds.

36 MATERIALS SCIENCE↗
NASA NTRS1981

Nonlinear viscoelastic characterization of thin polyethylene film

In order to understand the state of stress and strain in a typical balloon fabricated from thin polyethylene film, experiment data in the literature reviewed. It was determined that the film behaves as a nonlinear viscoelasticity material and should be characterized accordingly. A simple uniaxial, nonlinear viscoelastic model was developed for predicting stress given a certain strain history. The simple model showed good qualitative agreement with results of constant rate, uniaxial accurately predicting stresses for cyclic strain histories typical of balloon flights. A program was outlined which will result in the development of a more complex nonlinear viscoelastic model.

Wilbeck, J. S.↗
DOE OSTI2022

Characterization and interaction of geometric and contact/impact nonlinearities in dynamical systems

Here, we study how a contact/impact nonlinearity interacts with a geometric cubic nonlinearity in an oscillator system. Specific focus is shown to the effects on bifurcation behavior and secondary resonances (i.e., super- and sub-harmonic resonances). The effects of the individual nonlinearities are first explored for comparison, and then the influences of the combined nonlinearities, varying one parameter at a time, are analyzed and discussed. Nonlinear characterization is then performed on an arbitrary system configuration to study super- and sub-harmonic resonances and grazing contacts or bifurcations. Both the cubic and contact nonlinearities cause a drop in amplitude and shift up in frequency for the primary resonance, and they activate high-amplitude subharmonic resonance regions. The nonlinearities seem to never destructively interfere. The contact nonlinearity generally affects the system’s superharmonic resonance behavior more, particularly with regard to the occurrence of grazing contacts and the activation of many bifurcations in the system’s response. The subharmonic resonance behavior is more strongly affected by the cubic nonlinearity and is prone to multistable behavior. Perturbation theory proved useful for determining when the cubic nonlinearity would be dominant compared to the contact nonlinearity. The limiting behaviors of the contact stiffness and freeplay gap size indicate the cubic nonlinearity is dominant overall. It is demonstrated that the presence of contact may result in the activation of several bifurcations. In addition, it is proved that the system’s subharmonic resonance region is prone to multistable dynamical responses having distinct magnitudes.

42 ENGINEERING↗
NASA NTRS1982

Nonlinear viscoelastic characterization of polycarbonate

Uniaxial tensile creep and recovery data from polycarbonate at six temperatures and six stress levels are analyzed for nonlinear viscoelastic constitutive modeling. A theory to account for combined effects of two or more accelerating factors is presented.

Caplan, E. S.↗
NASA NTRS2001

Nonlinear Ultrasonic Characterization of Fatigue Microstructures

Dislocation dipole substructures formed during metal fatigue are shown to produce a substantial distortion of ultrasonic waves propagating through the fatigued material. A model of ultrasonic wave-dislocation dipole interactions is developed that quantifies the wave distortion by means of a material nonlinearity parameter (beta). Application of the model to AA2024-T4 predicts a value of p approximately 300% larger in material cyclically loaded for 100 kcycles in stress-control at 276 MPa and R=0 than that measured for virgin material. Experimental measurements show a monotonic increase in p as a function of the number of fatigue cycles that closely approaches the predicted increase. The experiments also suggest that the relevant dislocation substructures are localized in the material.

Cantrell, John H.↗
NASA NTRS2007

Characterization of Nonlinear Rate Dependent Response of Shape Memory Polymers

Shape Memory Polymers (SMPs) are a class of polymers, which can undergo deformation in a flexible state at elevated temperatures, and when cooled below the glass transition temperature, while retaining their deformed shape, will enter and remain in a rigid state. Upon heating above the glass transition temperature, the shape memory polymer will return to its original, unaltered shape. SMPs have been reported to recover strains of over 400%. It is important to understand the stress and strain recovery behavior of SMPs to better develop constitutive models which predict material behavior. Initial modeling efforts did not account for large deformations beyond 25% strain. However, a model under current development is capable of describing large deformations of the material. This model considers the coexisting active (rubber) and frozen (glass) phases of the polymer, as well as the transitions between the material phases. The constitutive equations at the continuum level are established with internal state variables to describe the microstructural changes associated with the phase transitions. For small deformations, the model reduces to a linear model that agrees with those reported in the literature. Thermomechanical characterization is necessary for the development, calibration, and validation of a constitutive model. The experimental data reported in this paper will assist in model development by providing a better understanding of the stress and strain recovery behavior of the material. This paper presents the testing techniques used to characterize the thermomechanical material properties of a shape memory polymer (SMP) and also presents the resulting data. An innovative visual-photographic apparatus, known as a Vision Image Correlation (VIC) system was used to measure the strain. The details of this technique will also be presented in this paper. A series of tensile tests were performed on specimens such that strain levels of 10, 25, 50, and 100% were applied to the material while it was above its glass transition temperature. After deforming the material to a specified applied strain, the material was then cooled to below the glass transition temperature (Tg) while retaining the deformed shape. Finally, the specimen was heated again to above the transition temperature, and the resulting shape recovery profile was measured. Results show that strain recovery occurs at a nonlinear rate with respect to time. Results also indicate that the ratio of recoverable strain/applied strain increases as the applied strain increases.

Volk, Brent↗