Search NASA⌕ Search

SEARCH · Search NASA

Results for “nuclear energy density functional”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Simulation of proton-induced energy deposition in integrated circuits

A time-efficient simulation technique was developed for modeling the energy deposition by incident protons in modern integrated circuits. To avoid the excessive computer time required by many proton-effects simulators, a stochastic method was chosen to model the various physical effects responsible for energy deposition by incident protons. Using probability density functions to describe the nuclear reactions responsible for most proton-induced memory upsets, the simulator determines the probability of a proton hit depositing the energy necessary for circuit destabilization. This factor is combined with various circuit parameters to determine the expected error-rate in a given proton environment. An analysis of transient or dose-rate effects is also performed. A comparison to experimental energy-disposition data proves the simulator to be quite accurate for predicting the expected number of events in certain integrated circuits.

Fernald, Kenneth W.↗
NASA NTRS1985

Galactic propagation models consistent with the cosmic ray lifetime derived from Be-10 measurements

Using a propagation calculation with energy dependent parameters, including the depletion of short pathlengths, and incorporating experimental nuclear excitation functions, the variation of the Be-10/Be9 ratio with the matter densities in two nested confinement regions is investigated. It is shown that there is no unique correspondence between a Be-10/Be9 measurement at low energy and the density of matter in the galaxy. Be-10/Be9 measurements at both low and high energy are needed to fully specify the matter densities.

Guzik, T. G.↗
NASA NTRS1993

Geometric model from microscopic theory for nuclear absorption

A parameter-free geometric model for nuclear absorption is derived herein from microscopic theory. The expression for the absorption cross section in the eikonal approximation, taken in integral form, is separated into a geometric contribution that is described by an energy-dependent effective radius and two surface terms that cancel in an asymptotic series expansion. For collisions of light nuclei, an expression for the effective radius is derived from harmonic oscillator nuclear density functions. A direct extension to heavy nuclei with Woods-Saxon densities is made by identifying the equivalent half-density radius for the harmonic oscillator functions. Coulomb corrections are incorporated, and a simplified geometric form of the Bradt-Peters type is obtained. Results spanning the energy range from 1 MeV/nucleon to 1 GeV/nucleon are presented. Good agreement with experimental results is obtained.

John, Sarah↗
NASA NTRS1993

Geometric model for nuclear absorption from microscopic theory

A parameter-free geometric model for nuclear absorption is derived from microscopic theory. The expression for the absorption cross section in the eikonal approximation taken in integral form is separated into a geometric contribution, described by an energy-dependent effective radius, and two surface terms which are shown to cancel in an asymptotic series expansion. For collisions of light nuclei, an expression for the effective radius is derived using harmonic-oscillator nuclear density functions. A direct extension to heavy nuclei with Woods-Saxon densities is made by identifying the equivalent half density radius for the harmonic-oscillator functions. Coulomb corrections are incorporated and a simplified geometric form of the Bradt-Peters type obtained. Results spanning the energy range of 1 MeV/nucleon to 1 GeV/nucleon are presented. Good agreement with experimental results are obtained.

John, S.↗
NASA NTRSDate not supplied

Nuclear Thermal Propulsion Material Trade for Additively Manufactured Regenerative Chambers

Nuclear thermal propulsion (NTP) is a game changing technology with advantages over chemical propulsion systems for deep space missions but comes with many engineering challenges. This paper focuses on the challenge of material selection for a regeneratively-cooled chamber for use in a nuclear environment with minimal design margins. Chemical compatibility with reactants and products following energy extraction (be it through combustion or neutron bombardment) must be considered. Similarly, mechanical and thermophysical properties (e.g., density, thermal conductivity, yield strength, etc.) as functions of temperature are critical. While hydrogen embrittlement environment (HEE) is a risk and consideration for traditional chemical combustion chambers, application in a nuclear thermal engine adds additional material compatibility and resilience requirements to long-term nuclear radiation exposure. Chamber materials in this trade included, but were not limited to, A-286, Haynes 230, Haynes 282, CRES 347, GRCop-42, GRCop-84, Inconel 625, JBK-75, and NASA HR-1. The material trade focuses on modern additive manufacturing techniques and hypothetical geometric constraints.

Nuclear Thermal Propulsion↗
NASA NTRSDate not supplied

Nuclear Thermal Propulsion Material Trade for Additively Manufactured Regenerative Chambers

Nuclear thermal propulsion (NTP) is a game changing technology with advantages over chemical propulsion systems for deep space missions but comes with many engineering challenges. This paper focuses on the challenge of material selection for a regeneratively-cooled chamber for use in a nuclear environment with minimal design margins. Chemical compatibility with reactants and products following energy extraction (be it through combustion or neutron bombardment) must be considered. Similarly, mechanical and thermophysical properties (e.g., density, thermal conductivity, yield strength, etc.) as functions of temperature are critical. While hydrogen embrittlement environment (HEE) is a risk and consideration for traditional chemical combustion chambers, application in a nuclear thermal engine adds additional material compatibility and resilience requirements to long-term nuclear radiation exposure. Chamber materials in this trade included, but were not limited to, A-286, Haynes 230, Haynes 282, CRES 347, GRCop-42, GRCop-84, Inconel 625, JBK-75, and NASA HR-1. The material trade focuses on modern additive manufacturing techniques and hypothetical geometric constraints.

Nuclear Thermal Propulsion↗
NASA NTRS1996

Study of Analytic Statistical Model for Decay of Light and Medium Mass Nuclei in Nuclear Fragmentation

The angular momentum independent statistical decay model is often applied using a Monte-Carlo simulation to describe the decay of prefragment nuclei in heavy ion reactions. This paper presents an analytical approach to the decay problem of nuclei with mass number less than 60, which is important for galactic cosmic ray (GCR) studies. This decay problem of nuclei with mass number less than 60 incorporates well-known levels of the lightest nuclei (A less than 11) to improve convergence and accuracy. A sensitivity study of the model level density function is used to determine the impact on mass and charge distributions in nuclear fragmentation. This angular momentum independent statistical decay model also describes the momentum and energy distribution of emitted particles (n, p, d, t, h, and a) from a prefragment nucleus.

Cucinotta, Francis A.↗
NASA NTRS1972

Deformed Brueckner-Hartree-Fock calculations

The renormalized Brueckner-Hartree-Fock (RBHF) theory for many-body nuclear systems is generalized to permit calculations for intrinsic states having permanent deformation. Both Hartree-Fock and Brueckner self-consistencies are satisfied, and details of the numerical techniques are discussed. The Hamada-Johnston interaction is used in a study of deformations, binding, size, and separation energies for several nuclei. Electromagnetic transition rates, moments, and electron scattering form factors are calculated using nuclear wave functions obtained by angular momentum projection. Comparison is made to experiment as well as to predictions of ordinary and density-dependent Hartree-Fock Theory.

Ford, W. F.↗
NASA NTRS1972

Deformed Brueckner-Hartree-Fock calculations.

The renormalized Brueckner-Hartree-Fock (RBHF) theory for many-body nuclear systems has been generalized to permit calculations for intrinsic states having permanent deformation. Both Hartree-Fock and Brueckner self-consistencies are satisfied, and details of the numerical techniques are discussed. The Hamada-Johnston interaction is used in a study of deformations, binding, size, and separation energies for several nuclei. Electromagnetic transition rates, moments, and electron scattering form factors are calculated using nuclear wave functions obtained by angular momentum projection. Comparison is made to experiment as well as to predictions of ordinary and density-dependent Hartree-Fock theory.

Ford, W. F.↗
NASA NTRS1978

Power density in direct nuclear-pumped He-3 lasers

The interaction of neutron beams with He-3 gas is of interest for nuclear pumped lasers. The effects of spectral dependence of the neutron beam, neutron attenuation in the gas-filled laser tube, and transport of the charged-particle He-3(n, p)He-3 reaction products are treated in detail. An expression for the energy density as a function of position within the tube, tube radius, operating pressure, and neutron fluence is given. The maximum energy density within the optical cavity is achieved when the tube radius is 3.26/P where P (atm) is the operating pressure. The variation of radius by 50% above and below optimum will change the energy density at most by 10%, although performance degrades quickly for radii outside this range. If the optimum tube radius is used for each operating pressure, then the power density on the centerline (kW/cu cm) is given as 9.3 x 10 to the -18th power times the operating pressure times flux in a thermal neutron environment of flux (n/sq cm sec).

Wilson, J. W.↗
NASA NTRS2007

Comparison of Integrated Radiation Transport Models with TEPC Measurements for the Average Quality Factors in Spaceflights

The purpose of this work is to test our theoretical model for the interpretation of radiation data measured in space. During the space missions astronauts are exposed to the complex field of radiation type and kinetic energies from galactic cosmic rays (GCR), trapped protons, and sometimes solar particle events (SPEs). The tissue equivalent proportional counter (TEPC) is a simple time-dependent approach for radiation monitoring for astronauts on board the International Space Station. Another and a newer approach to Microdosimetry is the use of silicon-on-insulator (SOI) technology launched on the MidSTAR-1 mission in low Earth orbit (LEO). In the radiation protection practice, the average quality factor of a radiation field is defined as a function of linear energy transfer (LET), Q(sub ave)(LET). However, TEPC measures the average quality factor as a function of the lineal energy y, Q(sub ave)(y), defined as the average energy deposition in a volume divided by the average chord length of the volume. Lineal energy, y, deviates from LET due to energy straggling, delta-ray escape or entry, and nuclear fragments produced in the detector volume. Monte Carlo track structure simulation was employed to obtain the response of a TEPC irradiated with charged particle for an equivalent site diameter of 1 micron of wall-less counter. The calculated data of the energy absorption in the wall-less counter were compiled for various y values for several ion types at various discrete projectile energy levels. For the simulation of TEPC response from the mixed radiation environments inside a spacecraft, such as, Space Shuttle and International Space Station, the complete microdosimetric TEPC response, f( y, E, Z), were calculated with the Monte Carlo theoretical results by using the first order Lagrangian interpolation for a monovariate function at a given y value (y = 0.1 keV/micron 5000 keV/micron) at any projectile energy level (E = 0.01 MeV/u to 50,000 MeV/u) of each specific radiation type (Z = 1 to 28). Because the anomalous response has been observed at large event sizes in the experiment due to the escape of energy out of sensitive volume by delta-rays and the entry of delta-rays from the high-density wall into the low-density gas-volume cavity, Monte Carlo simulation was also made for the response of a walled-TEPC with wall thickness 2 mm and density 1 g/cm(exp 3). The radius of cavity was set to 6.35 mm and a gas density 7.874 x 10(exp -5) g/cm(exp 3). The response of the walled- and the wall-less counters were compared. The average quality factor Q(sub ave)(y) for trapped protons on STS-89 demonstrated the good agreement between the model calculations and flight TEPC data as shown. Using an integrated space radiation model (this includes the transport codes HZETRN and BRYNTRN, the quantum nuclear interaction model QMSFRG) and the resultant response distribution functions of walled-TEPC from Monte-Carlo track simulations, we compared model calculations with walled-TEPC measurements from NASA missions in LEO and made predictions for the lunar and the Mars missions. The Q(sub ave)(y) values for the trapped or the solar protons ranged from 1.9-2.5. This over-estimates the Qave(LET) values which ranged from 1.4-1.6. Both quantities increase with shield thickness due to nuclear fragmentation. The Q(sub ave)(LET) for the complete GCR spectra was found to be 3.5-4.5, while flight TEPCs measured 2.9-3.4 for Q(sub ave)(y). The GCR values are decreasing with the shield thickness. Our analysis for a proper interpretation of data supports the use of TEPCs for monitoring space radiation environment.

Kim, Myung-Hee Y.↗
NASA NTRS2001

Endo-Fullerene and Doped Diamond Nanocrystallite Based Models of Qubits for Solid-State Quantum Computers

Models of encapsulated 1/2 nuclear spin H-1 and P-31 atoms in fullerene and diamond nanocrystallite, respectively, are proposed and examined with ab-initio local density functional method for possible applications as single quantum bits (qubits) in solid-state quantum computers. A H-1 atom encapsulated in a fully deuterated fullerene, C(sub 20)D(sub 20), forms the first model system and ab-initio calculation shows that H-1 atom is stable in atomic state at the center of the fullerene with a barrier of about 1 eV to escape. A P-31 atom positioned at the center of a diamond nanocrystallite is the second model system, and 3 1P atom is found to be stable at the substitutional site relative to interstitial sites by 15 eV, Vacancy formation energy is 6 eV in diamond so that substitutional P-31 atom will be stable against diffusion during the formation mechanisms within the nanocrystallite. The coupling between the nuclear spin and weakly bound (valance) donor electron coupling in both systems is found to be suitable for single qubit applications, where as the spatial distributions of (valance) donor electron wave functions are found to be preferentially spread along certain lattice directions facilitating two or more qubit applications. The feasibility of the fabrication pathways for both model solid-state qubit systems within practical quantum computers is discussed with in the context of our proposed solid-state qubits.

Park, Seongjun↗
NASA NTRS1990

Low-energy gamma ray attenuation characteristics of aviation fuels

Am241 (59.5 keV) gamma ray attenuation characteristics were investigated in 270 aviation fuel (Jet A and Jet A-1) samples from 76 airports around the world as a part of world wide study to measure the variability of aviation fuel properties as a function of season and geographical origin. All measurements were made at room temperature which varied from 20 to 27 C. Fuel densities (rho) were measured concurrently with their linear attenuation coefficients (mu), thus providing a measure of mass attenuation coefficient (mu/rho) for the test samples. In 43 fuel samples, rho and mu values were measured at more than one room temperature, thus providing mu/rho values for them at several temperatures. The results were found to be independent of the temperature at which mu and rho values were measured. It is noted that whereas the individual mu and rho values vary considerably from airport to airport as well as season to season, the mu/rho values for all samples are constant at 0.1843 + or - 0.0013 cu cm/gm. This constancy of mu/rho value for aviation fuels is significant since a nuclear fuel quantity gauging system based on low energy gamma ray attenuation will be viable throughout the world.

Singh, Jag J.↗
NASA NTRS1974

Low-temperature thermostatics of face-centered-cubic metallic hydrogen

The thermostatic properties of a high-symmetry phase of metallic hydrogen with atomic sphere radius between 0.1 and 1.5 bohr are studied, with special emphasis accorded to electronic screening and quantum proton motion. The electron-proton and proton-proton interactions receive a perturbation treatment based on the Singwi dielectric function, while the proton motion is handled by self-consistent harmonic approximation. Quantum behavior is found to be less pronounced than expected, and nuclear magnetism is absent. The phonon spectrum is, however, affected by screening and large proton motion. The zero-point vibrational energy and the superconducting critical temperature are below previous estimates. The crystalline-defect formation energies are a few times the Debye energy, which implies that defects contribute significantly to melting at the lower particle densities.

Caron, L. G.↗
NASA NTRS1995

Contribution of proton-induced short range secondaries to the LET spectra on LDEF

The contribution to the LET (linear energy transfer) spectrum from proton-induced short range secondaries was investigated by making measurements of total track density and LET spectra in CR-39 Plastic Nuclear Track Detectors (PNTD's) at varying shielding depths in the A0015 West-side stack. Proton-induced short range secondaries were found to make a significant contribution to the LET spectra, especially in the region above 100 keV/micron. At present, calculational models do not include this component. Total track density was measured at five shielding depths and was seen to increase as a function of shielding. LET spectra were measured under two shielding depths (2.6 and 9.2 g/cm(exp 2)) and stayed fairly constant as a function of shielding. Prerecovery estimates of LET spectra dropped off rapidly in the 100-300 keV/micron region, while the measured LET spectra extended to higher LET's. Track density and LET spectra measurements of secondaries were made in a CR-39 PNTD stack exposed to 154 MeV accelerator protons. Similarities in LET spectra measured in the A0015 experiment and in the 154 MeV accelerator proton stack demonstrate that a useful first step in modeling the contribution to the LET spectra of secondaries induced by the spectrum of trapped protons would be to model a mono-energetic proton beam being transported through a one-dimensional geometry.

Benton, E. R.↗
NASA NTRS2023

Homogeneity Study of ZrC, NbC, and TaC Binary Carbide Fuels for the Application of Nuclear Thermal Propulsion

In alignment with NASA and DARPA goals, efforts towards Nuclear Thermal Propulsion (NTP) have increased in recent years. As progress is made, a main challenge still exists; the fuel in an NTP system must survive the extreme environment experienced during operating conditions. Three fuel forms have been studied including a ceramic-metallic matrix, a ceramic-ceramic matrix, and solid solution carbides. Solid solution carbides were studied previously as a fuel for NTP and was shown to be a promising technology; however, the programs were canceled before demonstration in an NTP engine test. Of the refractory metal carbides of interest, zirconium carbide (ZrC), niobium carbide (NbC) and tantalum carbide (TaC) were studied. ZrC, NbC, and TaC powders were consolidated in monocarbide (ZrC, NbC, TaC) and bi-carbide (ZrC-NbC, ZrC-TaC, NbC-TaC) forms using spark plasma sintering (SPS), with 50-50 mol% compositions of the bi-carbides of interest. The time and temperature conditions to achieve a completely homogeneous solid solution for the mixed carbides is of interest for NTP fuel applications, since this homogeneity is considered to be essential for this fuel form. Homogeneity is typically not achieved during sintering, as surface diffusion (predominant for sintering to near ideal density) tends to occur at lower temperatures than bulk volumetric diffusion (required for solute interdiffusion to achieve a homogeneous solid solution). High temperature isochronal annealing was performed to identify the conditions to achieve a chemically homogeneous sample. The solute interpenetration vs annealing temperature was quantified using energy dispersion spectroscopy (EDS) in a scanning electron microscope (SEM). X-ray diffraction (XRD) was used to accurately measure the phase stability and lattice parameter as a function of annealing conditions. The diffusion data from each sample was then used to determine self-diffusion coefficients for interdiffusion of the Nb, Zr, and Ta solutes and compared to existing literature values. The minimum annealing conditions to achieve complete chemical homogeneity for each carbide was determined.

nuclear thermal propulsion↗
NASA NTRS2013

Galactic Cosmic Ray Event-Based Risk Model (GERM) Code

This software describes the transport and energy deposition of the passage of galactic cosmic rays in astronaut tissues during space travel, or heavy ion beams in patients in cancer therapy. Space radiation risk is a probability distribution, and time-dependent biological events must be accounted for physical description of space radiation transport in tissues and cells. A stochastic model can calculate the probability density directly without unverified assumptions about shape of probability density function. The prior art of transport codes calculates the average flux and dose of particles behind spacecraft and tissue shielding. Because of the signaling times for activation and relaxation in the cell and tissue, transport code must describe temporal and microspatial density of functions to correlate DNA and oxidative damage with non-targeted effects of signals, bystander, etc. These are absolutely ignored or impossible in the prior art. The GERM code provides scientists data interpretation of experiments; modeling of beam line, shielding of target samples, and sample holders; and estimation of basic physical and biological outputs of their experiments. For mono-energetic ion beams, basic physical and biological properties are calculated for a selected ion type, such as kinetic energy, mass, charge number, absorbed dose, or fluence. Evaluated quantities are linear energy transfer (LET), range (R), absorption and fragmentation cross-sections, and the probability of nuclear interactions after 1 or 5 cm of water equivalent material. In addition, a set of biophysical properties is evaluated, such as the Poisson distribution for a specified cellular area, cell survival curves, and DNA damage yields per cell. Also, the GERM code calculates the radiation transport of the beam line for either a fixed number of user-specified depths or at multiple positions along the Bragg curve of the particle in a selected material. The GERM code makes the numerical estimates of basic physical and biophysical quantities of high-energy protons and heavy ions that have been studied at the NASA Space Radiation Laboratory (NSRL) for the purpose of simulating space radiation biological effects. In the first option, properties of monoenergetic beams are treated. In the second option, the transport of beams in different materials is treated. Similar biophysical properties as in the first option are evaluated for the primary ion and its secondary particles. Additional properties related to the nuclear fragmentation of the beam are evaluated. The GERM code is a computationally efficient Monte-Carlo heavy-ion-beam model. It includes accurate models of LET, range, residual energy, and straggling, and the quantum multiple scattering fragmentation (QMSGRG) nuclear database.

Cucinotta, Francis A.↗