Search NASA⌕ Search

SEARCH · Search NASA

Results for “numeric profiling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2010

Automatic Tip Vortex Core Profiling for Numerical Flow Simulations of Rotorcraft in Hover

An automated approach is presented that extracts visual and quantitative data from vortex cores produced by Navier-Stokes simulations of rotorcraft in hover mode. This approach extracts contiguous rotor tip vortex-core trajectories, cross-flow velocity profiles, and vortex-core diameter variation with wake age (azimuth angle). This automated approach is faster and more accurate than a conventional manual approach. Moreover, this new approach allows for an efficient way to quantitatively compare vortex-core profiles from different flow simulations, e.g., grid resolution studies, and validate computed results with experimental data

Kao, David L.↗
NASA NTRS1991

Computational analysis of plume induced separation

Full Navier-Stokes simulations around axisymmetric boattailed and flared rockets are numerically investigated for plume induced separation phenomenon. At lower altitudes, the plume interaction with the external flow does not cause any flow separation on the body, but at conditions corresponding to higher altitudes large plume induced separation is observed. Addition of a flare to the afterbody limits the extent of separation at high altitudes. Computational solutions for the boattailed axisymmetric geometry are compared with available wind-tunnel and flight data. The effect of forebody ablation is studied by modifying the inflow boundary layer profile. Numerical solutions with thicker boundary layers show significantly greater plume-induced separation compared with nonablating cases. Heat transfer to the wall was computed for the flared afterbody geometry and is presented.

Venkatapathy, Ethiraj↗
NASA NTRS1995

Hypersonic Combustor Model Inlet CFD Simulations and Experimental Comparisons

Numerous two-and three-dimensional computational simulations were performed for the inlet associated with the combustor model for the hypersonic propulsion experiment in the NASA Ames 16-Inch Shock Tunnel. The inlet was designed to produce a combustor-inlet flow that is nearly two-dimensional and of sufficient mass flow rate for large scale combustor testing. The three-dimensional simulations demonstrated that the inlet design met all the design objectives and that the inlet produced a very nearly two-dimensional combustor inflow profile. Numerous two-dimensional simulations were performed with various levels of approximations such as in the choice of chemical and physical models, as well as numerical approximations. Parametric studies were conducted to better understand and to characterize the inlet flow. Results from the two-and three-dimensional simulations were used to predict the mass flux entering the combustor and a mass flux correlation as a function of facility stagnation pressure was developed. Surface heat flux and pressure measurements were compared with the computed results and good agreement was found. The computational simulations helped determine the inlet low characteristics in the high enthalpy environment, the important parameters that affect the combustor-inlet flow, and the sensitivity of the inlet flow to various modeling assumptions.

Venkatapathy, E.↗
NASA NTRS1974

The broadening of He I lines including ion dynamic corrections, with application to 4471 A

A theory of the broadening of He I lines with forbidden components is developed. The theory takes into account the effects of dynamic ion broadening and is valid at low densities where the forbidden line is reasonably well isolated. Good agreement with experiment and with calculations by Lee (1972) was obtained when the theory was applied at a wavelength of 4471 A. Tables of these data are given and are extended into the line wings beyond the extent of previous tabulations. Reasons for agreement with Lee data are discussed in detail. The density level above which the static ion theory is adequate is defined. A simple numerical profile of allowed lines is also obtained, taking into account dynamic ion effects.

Barnard, A. J.↗
NASA NTRS1981

Solar extinction radiometry

Work on the spectral line parameters of hydroxyl radical band was completed. The UV-visible data obtained during 1977 balloon flights were used for zone quantification. The region between from 3100 A to 3500 A appears to be the best region to use for determining ozone columns with the three wavelength method. Ozone volume mixing ratios determined for the 1977 data were compared with standard middle latitude ozone profiles. Numerous high and low Sun scans were obtained during ascent and from float altitude (1981 balloon flight) at 0.003 A resolution in the 3068 A to 3089 A region. The spectra are being studied for OH identification and quantification.

Goldman, A.↗
NASA NTRS1980

The applicability of the piecewise linear current profile in the baroclinic instability problem

The applicability of the piecewise linear function in place of a similar smoothly-varying current profile is examined in the baroclinic context. Within the framework of small-perturbation linearization, the behavior of the vertical velocity and the horizontal divergence is analyzed at the discontinuity of the current shear. In the conventional geostrophic-type instability regime, the discontinuity in the horizontal divergence at the shear discontinuity is suppressed, and, therefore, the piecewise linear profile leads to a useful approximation to the true solution. In the symmetric-type instability regime, however, due to the magnified discontinuity in the horizontal divergence at the shear discontinuity, the solution thus obtained will show a major distortion, rendering the piecewise linear profile inadequate for modeling the smoothly-varying current profile. Using exemplary current profiles, numerical results are presented to demonstrate the behavior of the horizontal divergence near the discontinuity of current shear.

Hyun, J. M.↗
NASA NTRS1990

Analysis of the single-blow transient testing technique for perforated plate heat exchangers

An analysis of the single-blow transient testing technique for heat exchanger surfaces is made for perforated plate and similar discontinuous surfaces. The model assumes that there is no temperature variation across each plate, and allows for axial conduction in spacers: the resulting axial fluid temperature profile is discontinuous, rather than the usual continuous profile. Numerical solutions are obtained to the resulting set of coupled first-order differential equations for a step change in inlet fluid temperature. Results are presented in tabular form, which allow the heat transfer coefficients to be calculated from test data using the maximum slope technique.

Rodriguez, Jose I.↗
NASA NTRS1992

A statistical model for evaluating GOPEX uplink performance

This article describes a statistical model to analyze the signal intensity received at the solid-state imaging (SSI) camera of the Galileo optical communications system from an Earth-based transmitter (GOPEX) demonstration. The analytical model assumes that the optical beam possesses a Gaussian profile and the communication channel has a log-normal scattering characteristic. The atmospheric-induced jitter is modelled as two independent zero mean Gaussian random variables. By modelling the system parameters as a set of independent and identically distributed (iid) random variables, the combined impact of uncertainties due to system parameters and the turbulent atmosphere can be approximated by a log-normal distributed signal intensity at the spacecraft. A Monte-Carlo software simulation package was also developed to compute the confidence interval probabilities for general optical beam profiles. Numerical results show that the approximation is valid for a wide range of operation scenarios.

Kiesaleh, K.↗
NASA NTRS1944

The flow of a compressible fluid past a circular arc profile

The Ackeret iteration process is utilized to obtain higher approximations than that of Prandtl and Glauert for the flow of a compressible fluid past a circular arc profile. The procedure is to expand the velocity potential in a power series of the camber coefficient. The first two terms of the development correspond to the Prandtl-Glauert approximation and yield the well-known correction to the circulation about the profile. The second approximation, involving the square of the camber coefficient, improves the velocity and pressure fields but yields no new results with regard to the circulation, since the circulation about the profile is an odd function of the camber coefficient. The third approximation, involving the cube of the camber coefficient, permits the use of higher values of the camber coefficient and furthermore yields an improvement to the Prandtl-Glauert rule with regard to the effect of compressibility on the circulation of the circular arc profile. Numerical examples with tables and graphs illustrate the results of the analysis.

Kaplan, Carl↗
NASA NTRS1978

Numerical spatial marching techniques for estimating duct attenuation and source pressure profiles

A numerical method was developed that could predict the pressure distribution of a ducted source from far field pressure inputs. Using an initial value formulation, the two-dimensional homogeneous Helmholtz wave equation (no steady flow) was solved using explicit marching techniques. The Von Neumann method was used to develop relationships which describe how sound frequency and grid spacing effect numerical stability. At the present time, stability considerations limit the approach to high frequency sound. Sample calculations for both hard and soft wall ducts compare favorably to known boundary value solutions. In addition, assuming that reflections in the duct are small, this initial value approach was successfully used to determine the attenuation of a straight soft wall duct. Compared to conventional finite difference or finite element boundary value approaches, the numerical marching technique is orders of magnitude shorter in computation time and required computer storage and can be easily employed in problems involving high frequency sound.

Baumeister, K. J.↗
NASA NTRS1978

Numerical spatial marching techniques for estimating duct attenuation and source pressure profiles

A numerical method is developed that could predict the pressure distribution of a ducted source from far-field pressure inputs. Using an initial value formulation, the two-dimensional homogeneous Helmholtz wave equation (no steady flow) is solved using explicit marching techniques. The Von Neumann method is used to develop relationships which describe how sound frequency and grid spacing effect numerical stability. At the present time, stability considerations limit the approach to high frequency sound. Sample calculations for both hard and soft wall ducts compare favorably to known boundary value solutions. In addition, assuming that reflections in the duct are small, this initial value approach is successfully used to determine the attenuation of a straight soft wall duct. Compared to conventional finite difference or finite element boundary value approaches, the numerical marching technique is orders of magnitude shorter in computation time and required computer storage and can be easily employed in problems involving high frequency sound.

Baumeister, K. J.↗
NASA NTRS1974

Radiation from an array of gray circular fins of trapezoidal profile

A numerical method is developed to calculate the temperature distribution and radiation heat transfer for an annular fin and tube radiator, with fins having trapezoidal profiles. All surfaces are assumed gray and to emit and reflect diffusely. Radiative interactions between adjacent fins and between the fins and tube are included. The thermal conductivity of the fin material may vary linearly with temperature. Results of a parametric study of the special case of circular fins of triangular profile having constant thermal conductivity are presented and used to optimize a fin array with respect to minimum weight.

Schnurr, N. M.↗
NASA NTRS1991

A study of high-temperature heat pipes with multiple heat sources and sinks. I - Experimental methodology and frozen startup profiles. II - Analysis of continuum transient and steady-state experimental data with numerical predictions

Experimental profiles for heat pipe startup from the frozen state were obtained, using a high-temperature sodium/stainless steel pipe with multiple heat sources and sinks to investigate the startup behavior of the heat pipe for various heat loads and input locations, with both low and high heat rejection rates at the condensor. The experimental results of the performance characteristics for the continuum transient and steady-state operation of the heat pipe were analyzed, and the performance limits for operation with varying heat fluxes and location are determined.

Faghri, A.↗
NASA NTRS1972

A direct numerical method for predicting concentration profiles in a turbulent boundary layer over a flat plate

A numerical solution of the turbulent mass transport equation utilizing the concept of eddy diffusivity is presented as an efficient method of investigating turbulent mass transport in boundary layer type flows. A FORTRAN computer program is used to study the two-dimensional diffusion of ammonia, from a line source on the surface, into a turbulent boundary layer over a flat plate. The results of the numerical solution are compared with experimental data to verify the results of the solution. Several other solutions to diffusion problems are presented to illustrate the versatility of the computer program and to provide some insight into the problem of mass diffusion as a whole.

Dow, J. W.↗
NASA NTRS1988

Numerical simulations of the profile properties of undeformed first-year sea ice during the growth season

A model is presented for estimating salinity profiles for the first-year sea ice during the growth season, in which ice growth equations were coupled with salt entrapment and brine drainage relations to obtain the relationship between the initial ice salinity and the ice-growth velocity and seawater salinity, as well as the subsequent drainage of brine from the ice. The results obtained were found to be in reasonable agreement with field observations in that they showed characteristic C-shaped profiles similar to natural profiles. The average ice salinity values were also in reasonable agreement with field data. The predicted ice property profiles give composite plate properties that are significantly different from bulk property estimates that would result by assuming that sea ice could be represented as a homogeneous plate.

Cox, G. F. N.↗
NASA NTRS2000

Convection Induced by Traveling Magnetic Fields in Semiconductor Melts

Axisymmetric traveling magnetic fields (TMF) can be beneficial for crystal growth applications. such as the vertical Bridgman, float zone or traveling heater methods. TMF induces a basic flow in the form of a single roll. This type of flow can enhance mass and heat transfer to the growing crystal. More importantly, the TMF Lorentz body force induced in the system can counterbalance the buoyancy forces, so the resulting convection can be much smaller and even the direction of it can be changed. In this presentation, we display basic features of this novel technique. In particular, numerical calculations of the Lorentz force for arbitrary frequencies will be presented along with induced steady-state fluid flow profiles. Also, numerical modeling of the TMF counter-balancing natural convection in vertical Bridgman systems will be demonstrated.

Konstantin, Mazuruk↗
NASA NTRS1979

Numerical calculations of high-altitude differential charging: Preliminary results

A two dimensional simulation program was constructed in order to obtain theoretical predictions of floating potential distributions on geostationary spacecraft. The geometry was infinite-cylindrical with angle dependence. Effects of finite spacecraft length on sheath potential profiles can be included in an approximate way. The program can treat either steady-state conditions or slowly time-varying situations, involving external time scales much larger than particle transit times. Approximate, locally dependent expressions were used to provide space charge, density profiles, but numerical orbit-following is used to calculate surface currents. Ambient velocity distributions were assumed to be isotropic, beam-like, or some superposition of these.

Laframboise, J. G.↗