Search NASA⌕ Search

SEARCH · Search NASA

Results for “numerical discretization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Lyapunov spectrum of the separated flow around the NACA 0012 airfoil and its dependence on numerical discretization

We investigate the impact of numerical discretization on the Lyapunov spectrum of separated flow simulations. The two-dimensional chaotic flow around the NACA 0012 airfoil at a low Reynolds number and large angle of attack is considered to that end. Time, space and accuracy-order refinement studies are performed to examine each of these effects separately. Numerical results show that the time discretization has a small impact on the dynamics of the system, whereas the spatial discretization can dramatically change them. Also, the finite-time Lyapunov exponents associated to unstable modes are shown to be positively skewed, and quasi-homoclinic tangencies are observed in the attractor of the system. The implications of these results on flow physics and sensitivity analysis of chaotic flows are discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Numerical discreteness errors in multispecies cosmological N -body simulations

ABSTRACT We present a detailed analysis of numerical discreteness errors in two-species, gravity-only, cosmological simulations using the density power spectrum as a diagnostic probe. In a simple set-up where both species are initialized with the same total matter transfer function, biased growth of power forms on small scales when the solver force resolution is finer than the mean interparticle separation. The artificial bias is more severe when individual density and velocity transfer functions are applied. In particular, significant large-scale offsets in power are measured between simulations with conventional offset grid initial conditions when compared against converged high-resolution results where the force resolution scale is matched to the interparticle separation. These offsets persist even when the cosmology is chosen so that the two particle species have the same mass, indicating that the error is sourced from discreteness in the total matter field as opposed to unequal particle mass. We further investigate two mitigation strategies to address discreteness errors: the frozen potential method and softened interspecies short-range forces. The former evolves particles under the approximately ‘frozen’ total matter potential in linear theory at early times, while the latter filters cross-species gravitational interactions on small scales in low-density regions. By modelling closer to the continuum limit, both mitigation strategies demonstrate considerable reductions in large-scale power spectrum offsets.

79 ASTRONOMY AND ASTROPHYSICS↗

Structure-preserving numerical discretizations for domains with boundaries

This SAND report documents Exploratory Express LDRD Project 223790, "Structure-preserving numerical discretizations for domains with boundaries", which developed a method to incorporate consistent treatment of domain boundaries and arbitrary boundary conditions in discrete exterior calculus (DEC) for arbitrary polygonal (2D) and tensor-product structure prism (3D) grids. The new DEC required the development of novel discrete exterior derivatives, boundary operators, wedge products and Hodge stars. This was accomplished through the use of boundary extension and the blending of known 2D operators on the interior with 1D operators on the boundary. The Hodge star was based on the Voronoi Hodge star, and retained the limitation of a triangular circumcentric primal or dual grid along with low-order accuracy. In addition to the new DEC, two related software packages were written: one for the study of DEC operators on arbitrary polygonal and polyhedral grids using both symbolic and numerical approaches and one for a (thermal) shallow water testbed using TRiSK-type numerics. Immediately relevant (already funded, through CANGA) followup work is the development of a high-order, geometrically flexible Hodge star and structure-preserving, high-order, oscillation-limiting transport operators (using WENO) for n-forms on arbitrary 2D and 3D grids. This will provide all of the machinery required for a high-order version of TRiSK with boundaries on arbitrary 2D and tensor-product 3D grids, which is applicable to both the atmospheric (CRM in E3SM-MMF) and oceanic (MPAS-O) components of E3SM.

97 MATHEMATICS AND COMPUTING↗

Effect of the numerical discretization scheme in Shock-Driven turbulent mixing simulations

In this work, we evaluate the effects of distinct numerical strategies in simulations of shock-driven turbulent mixing. An air-SF 6 -air gas curtain subjected to Mach 1.2 shock-waves is computed with Implicit Large-Eddy Simulation based on three numerical schemes: directional-split with Harten-Lax-van Leer (HLL) solver; directional-unsplit using HLL-Contact (HLLC) solver; and directional-unsplit with HLLC solver and a Low Mach number Correction (LMC). The results illustrate the importance of the numerical strategy to the accuracy of the predictions. Whereas both split and unsplit schemes result in a similar spatial development of the initial shock-driven instability, only the unsplit schemes can predict the turbulent mixing transition after reshock observed by the laboratory experiments. Such feature increases the mixing rate of the two fluids, this being particularly pronounced when the LMC is active due to i) the reduced flow Mach number, and ii) the larger effective Reynolds number. Since the selected mixing problem is driven by the deposition of vorticity at the fluids’ interface, the resultant flow physics is analyzed by investigating the contribution of distinct inviscid mechanisms to the production of vorticity: baroclinicity, stretching, and dilatation. As expected, it is observed that the production of vorticity is initially dominated by the baroclinicity mechanism. Yet, the relevance of the remainder mechanisms is enhanced after the reshock and may even surpass the baroclinicity term.

42 ENGINEERING↗

Numerical discretization of completely integrable nonlinear Hamiltonian systems

Completely integrable nonlinear Hamiltonian systems offer attractive models for novel accelerator systems that are being developed to push the frontiers of high intensity and high power beam applications. However, all known numerical methods used to discretize and simulate these systems spoil the integrability property of the original, time-continuous, theoretically integrable system. Since the hallmark of integrability is the existence of sufficiently many functionally independent first integrals in involution, we investigated several methods’ performance in terms of invariant preservation over longer timescales. We conclude that, while novel structure preserving integrators would be ideal, symplectic methods under mild restrictions offer adequate invariant preservation. We especially highlight the very good performance of the Stormer-Verlet method at low accuracy and a modified Lobatto method at high accuracy for the Integrable Optics Test Accelerator (IOTA). However, we show that symplectic integrators are limited by numerically induced resonances, which make interpretation of some simulation results challenging. These limitations and workarounds are discussed.

43 PARTICLE ACCELERATORS↗

Discrete numerical simulations of torpedo anchor installation in granular soils

Torpedo anchors are a viable approach for mooring marine hydrokinetic (MHK) energy devices to the seafloor. These anchors can serve to maintain station and to provide the reaction force for an MHK device. The ability of the anchor to perform these duties is a strong function of its penetration depth during installation. This is a large-strain problem not amenable to typical continuum numerical approaches. In the current work, we propose that the discrete element method (DEM) is a more appropriate tool to investigate the shallow penetration of torpedo anchors in sands. The effects of anchor mass, impact velocity, and soil interparticle friction are considered in the DEM simulations. The relative maximum penetration depths for different penetration conditions are quantified and presented. Granular material response at the microscale during penetration are used to provide insight into system response. Energy dissipation in the assembly by both friction and collision at the particle scale are considered. Results show that anchor penetration increases approximately linearly with an increase in impact velocity or anchor weight. Penetration decreases with an increase in interparticle friction (i.e., soil strength). Observations of microscale behaviors and energy calculations are used to provide insight into overall system response.

58 GEOSCIENCES↗

A Leray regularized ensemble-proper orthogonal decomposition method for parameterized convection-dominated flows

Abstract Partial differential equations (PDEs) are often dependent on input quantities that are uncertain. To quantify this uncertainty PDEs must be solved over a large ensemble of parameters. Even for a single realization this can be a computationally intensive process. In the case of flows governed by the Navier–Stokes equations, an efficient method has been devised for computing an ensemble of solutions. To further reduce the computational cost of this method, an ensemble-proper orthogonal decomposition (POD) method was recently proposed. The main contribution of this work is the introduction of POD spatial filtering for ensemble-POD methods. The POD spatial filter makes possible the construction of the Leray ensemble-POD model, which is a regularized-reduced order model for the numerical simulation of convection-dominated flows of moderate Reynolds number. The Leray ensemble-POD model employs the POD spatial filter to smooth (regularize) the convection term in the Navier–Stokes equations, and diminishes the numerical inaccuracies produced by the ensemble-POD method in the numerical simulation of convection-dominated flows. Specifically, for the numerical simulation of a convection-dominated two-dimensional flow between two offset cylinders, we show that the Leray ensemble-POD method better reflects the dynamics of the benchmark results than the ensemble-POD scheme. The second contribution of this work is a new numerical discretization of the variable viscosity ensemble algorithm in which the average viscosity is replaced with the maximum viscosity. It is shown that this new numerical discretization is significantly more stable than those in current use. Furthermore, error estimates for the novel Leray ensemble-POD algorithm with this new numerical discretization are also proven.

Mathematics↗

Validation of SAS4A/SASSYS-1 for Steady-State Single-Phase Natural Circulation

The development of numerical software for engineering applications requires the validation of the code against experimental benchmark datasets. To support the validation of SAS4A/SASSYS-1 in simulating the single-phase natural circulation within nuclear reactor systems, high-precision steady-state experiments are performed to capture single-phase natural circulation phenomena on an existing scaled facility with comprehensive instrumentation. Forced convection tests are designed precisely capturing the facility’s critical thermal-hydraulic parameters required for one-dimensional modeling, and a comprehensive single-phase natural circulation dataset is obtained with well-documented experimental uncertainty and facility description. Analysis and discussion based on the finalized dataset confirm the dataset’s ability in capturing dominant phenomena and address important physical interpretation of parameters. The dataset reported in this project provides a valuable benchmark resource for the validation of system analysis codes under single-phase natural circulation inside nuclear reactors. Validation of SAS4A/SASSYS-1 is then performed against the obtained benchmark dataset to confirm the capability of its physics model in simulating the steady-state single-phase natural circulation. The experimental facility is modeled in the candidate code. Solution verification is performed using Richardson-extrapolation-based estimators to quantify and restrict numerical errors from discretization. Numerical uncertainty originating from finite maximum pseudo-transient time is also quantified and restricted. Input uncertainty provided by the benchmark dataset is forward propagated through the candidate code, directly quantifying the simulation output in a Monte Carlo approach. The composition of the output uncertainty is further determined by the estimators of Sobol’ indices through a variance-based sensitivity analysis. With uncertainty quantified for each individual condition, detailed comparison between the simulation results and experimental data is performed covering the whole dataset, which shows consistent agreement for all important quantities. The validation activity reported in this project demonstrates that SAS4A/SASSYS-1 can predict the primary parameters with satisfactorily accuracy under steady-state single-phase natural circulation.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Discretization of the Joule heating term for plasma discharge fluid models in unstructured meshes

The fluid (continuum) approach is commonly used for simulation of plasma phenomena in electrical discharges at moderate to high pressures (>10's mTorr). The description comprises governing equations for charged and neutral species transport and energy equations for electrons and the heavy species, coupled to equations for the electromagnetic fields. The coupling of energy from the electrostatic field to the plasma species is modeled by the Joule heating term which appears in the electron and heavy species (ion) energy equations. Proper numerical discretization of this term is necessary for accurate description of discharge energetics; however, discretization of this term poses a special problem in the case of unstructured meshes owing to the arbitrary orientation of the faces enclosing each cell. We propose a method for the numerical discretization of the Joule heating term using a cell-centered finite volume approach on unstructured meshes with closed convex cells. The Joule heating term is computed by evaluating both the electric field and the species flux at the cell center. The dot product of these two vector quantities is computed to obtain the Joule heating source term. We compare two methods to evaluate the species flux at the cell center. One is based on reconstructing the fluxes at the cell centers from the fluxes at the face centers. The other recomputes the flux at the cell center using the common drift-diffusion approximation. The reconstructed flux scheme is the most stable method and yields reasonably accurate results on coarse meshes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Large-Eddy Simulations of Idealized Atmospheric Boundary Layers Using Nalu-Wind

Accurate prediction of wind-plant performance relies, in part, on properly characterizing the turbulent atmospheric boundary layer (ABL) flow in which wind turbines operate. Large-eddy simulation (LES) is a powerful tool for simulating ABLs because it resolves the largest, most energetic scales of three-dimensional turbulent motions. Yet LES predictions are well known to depend on modeling choices such as grid resolution, numerical discretization schemes, and closures for unresolved scales of turbulence. Here, we evaluate how these choices influence predictions of ABL winds using Nalu-Wind, a wind-specific fork of the open-source, generalized, unstructured, massively parallel flow solver NaluCFD/Nalu.

17 WIND ENERGY↗

Removing Numerical Pathologies in a Turbulence Parameterization Through Convergence Testing

Abstract Discretized numerical models of the atmosphere are usually intended to faithfully represent an underlying set of continuous equations, but this necessary condition is violated sometimes by subtle pathologies that have crept into the discretized equations. Such pathologies can introduce undesirable artifacts, such as sawtooth noise, into the model solutions. The presence of these pathologies can be detected by numerical convergence testing. This study employs convergence testing to verify the discretization of the Cloud Layers Unified By Binormals (CLUBB) model of clouds and turbulence. That convergence testing identifies two aspects of CLUBB's equation set that contribute to undesirable noise in the solutions. First, numerical limiters (i.e., clipping) used by CLUBB introduce discontinuities or slope discontinuities in model fields. Second, nonlinear artificial diffusion employed for improving numerical stability can introduce unintended small‐scale features into the solution of the model equations. Smoothing the limiters and using linear artificial diffusion reduces the noise and restores the expected first‐order convergence in CLUBB's solutions. These model reformulations enhance our confidence in the trustworthiness of solutions from CLUBB by eliminating the unphysical oscillations in high‐resolution simulations. The improvements in the results at coarser, near‐operational grid spacing and timestep are also seen in cumulus cloud and dry turbulence tests. In addition, convergence testing is proven to be a valuable tool for detecting pathologies, including unintended discontinuities and grid dependence, in the model equation set.

58 GEOSCIENCES↗

DCMIP2016: the splitting supercell test case

Abstract. This paper describes the splitting supercell idealized test case used in the 2016 Dynamical Core Model Intercomparison Project (DCMIP2016). These storms are useful test beds for global atmospheric models because the horizontal scale of convective plumes is O(1 km), emphasizing non-hydrostatic dynamics. The test case simulates a supercell on a reduced-radius sphere with nominal resolutions ranging from 4 to 0.5 km and is based on the work of Klemp et al. (2015). Models are initialized with an atmospheric environment conducive to supercell formation and forced with a small thermal perturbation. A simplified Kessler microphysics scheme is coupled to the dynamical core to represent moist processes. Reference solutions for DCMIP2016 models are presented. Storm evolution is broadly similar between models, although differences in the final solution exist. These differences are hypothesized to result from different numerical discretizations, physics–dynamics coupling, and numerical diffusion. Intramodel solutions generally converge as models approach 0.5 km resolution, although exploratory simulations at 0.25 km imply some dynamical cores require more refinement to fully converge. These results can be used as a reference for future dynamical core evaluation, particularly with the development of non-hydrostatic global models intended to be used in convective-permitting regimes.

Zarzycki, Colin M.↗

Removing numerical pathologies in a turbulence parameterization through convergence testing

Discretized numerical models of the atmosphere are usually intended to faithfully represent an underlying set of continuous equations, but this necessary condition is violated sometimes by subtle pathologies that have crept into the discretized equations. Such pathologies can introduce undesirable artifacts, such as sawtooth noise, into the model solutions. The presence of these pathologies can be detected by numerical convergence testing. This study employs convergence testing to verify the discretization of the Cloud Layers Unified By Binormals (CLUBB) model of clouds and turbulence. That convergence testing identifies two aspects of CLUBB's equation set that contribute to undesirable noise in the solutions. First, numerical limiters (i.e. clipping) used by CLUBB introduce discontinuities or slope discontinuities in model fields. Second, this noise can be amplified by an advective term in CLUBB's background diffusion. Smoothing the limiters and removing the advective component of the background diffusion reduces the noise and restores the expected first-order convergence in CLUBB's solutions. These model reformulations improve the results at coarser, near-operational grid spacing and time step in cumulus cloud and dry turbulence tests. In addition, convergence testing is proved to be a valuable tool for detecting pathologies, including unintended discontinuities and grid dependence, in the model equation set.

Mathematics and Computing, Geosciences↗

A New Class of Non-Linear, Finite-Volume Methods for Vlasov Simulation

Methods for the numerical discretization of the Vlasov equation should efficiently use the phase space discretization and should introduce only enough numerical dissipation to promote stability and control oscillations. A new high-order, non-linear, finite-volume algorithm for the Vlasov equation that discretely conserves particle number and controls oscillations is presented. The method is fourth-order in space and time in well-resolved regions, but smoothly reduces to a third-order upwind scheme as features become poorly resolved. The new scheme is applied to several standard problems for the Vlasov-Poisson system, and the results are compared with those from other finite-volume approaches, including an artificial viscosity scheme and the Piecewise Parabolic Method. It is shown that the new scheme is able to control oscillations while preserving a higher degree of fidelity of the solution than the other approaches.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Neural entropy-stable conservative flux form neural networks for learning hyperbolic conservation laws

We propose a neural entropy-stable conservative flux form neural network (NESCFN) for learning hyperbolic conservation laws and their associated entropy functions directly from solution trajectories, without requiring any predefined numerical discretization. While recent neural network architectures have successfully integrated classical numerical principles into learned models, most rely on prior knowledge of the governing equations or assume a fixed discretization. Our approach removes this dependency by embedding entropy-stable design principles into the learning process itself, enabling the discovery of physically consistent dynamics in a fully data-driven setting. By jointly learning both the flux function and a corresponding entropy, NESCFN promotes conservation and entropy dissipation, which is critical for long-term stability and fidelity in the system of hyperbolic conservation laws. Furthermore, numerical results demonstrate that the method achieves stability and conservation over extended time horizons and accurately captures shock propagation speeds, even without oracle access to future-time solution profiles in the training data.

Conservative flux form↗

Comparative Study of Finite Element Methods Using the Time-Accuracy-Size(TAS) Spectrum Analysis

We present a performance analysis appropriate for comparing algorithms using different numerical discretizations. By taking into account the total time-to-solution, numerical accuracy with respect to an error norm, and the computation rate, a cost-benefit analysis can be performed to determine which algorithm and discretization are particularly suited for an application. This work extends the performance spectrum model in for interpretation of hardware and algorithmic tradeoffs in numerical PDE simulation. As a proof-of-concept, popular finite element software packages are used to illustrate this analysis for Poisson’s equation.

97 MATHEMATICS AND COMPUTING↗