Search NASA⌕ Search

SEARCH · Search NASA

Results for “operando spectroscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Operando Raman spectroscopy uncovers hydroxide and CO species enhance ethanol selectivity during pulsed CO 2 electroreduction

Pulsed CO 2 electroreduction (CO 2 RR) has recently emerged as a facile way to in situ tune the product selectivity, in particular toward ethanol, without re-designing the catalytic system. However, in-depth mechanistic understanding requires comprehensive operando time-resolved studies to identify the kinetics and dynamics of the electrocatalytic interface. Here, we track the adsorbates and the catalyst state of pre-reduced Cu 2 O nanocubes (~30 nm) during pulsed CO 2 RR using sub-second time-resolved operando Raman spectroscopy. By screening a variety of product-steering pulse length conditions, we unravel the critical role of co-adsorbed OH and CO on the Cu surface next to the oxidative formation of Cu-O ad or CuO x /(OH) y species, impacting the kinetics of CO adsorption and boosting the ethanol selectivity. However, a too low OH ad coverage following the formation of bulk-like Cu 2 O induces a significant increase in the C 1 selectivity, while a too high OH ad coverage poisons the surface for C-C coupling. Thus, we unveil the importance of co-adsorbed OH on the alcohol formation under CO 2 RR conditions and thereby, pave the way for improved catalyst design and operating conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Spatially Mapping the CO 2 Alkaline Sorbent Diffuse Microenvironment Using Operando Raman Spectroscopy

When designing a chemical process, the local balance of transport and kinetics, collectively referred to as the diffuse microenvironment, plays a critical role in performance but is difficult to directly observe. This work demonstrates a method of two-dimensional spatial chemical mapping of the diffuse microenvironment in the context of alkali metal hydroxide direct air capture of carbon dioxide using a custom operando gas-absorption flow cell along with confocal Raman spectroscopy. Notably, we observe the concentration boundary layer near the gas–liquid interface and elucidate the interplay of carbonate and bicarbonate ions within it while inferring local hydroxide depletion through continuum modeling. These first of their kind observations provide a technique to compare the performance of direct air capture solvents based on diffuse microenvironment dynamics while also providing metrics important for air contactor design such as boundary layer thickness. Overall, this work showcases a new experimental platform to study interfacial diffuse microenvironments in and outside of the field of direct air capture of carbon dioxide.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Probing Surface/Bulk Structural Chemistry of Key Components of Solid Oxide Electrochemical Cells with In Situ / Operando Raman Spectroscopy

The remarkable attributes of solid oxide electrochemical cell technology (e.g., energy efficiency, low cost, scalability, low emissions, and operational flexibility, etc.) drive the wider adoption of electrochemical conversion routes for sustainability. It is critical for the codevelopment of solid oxide cell materials and processes to establish the mechanistic understanding of the underlying chemical phenomena at the molecular level. Herein, we summarize the advancements in Raman spectroscopy that provide structural/molecular information on electrode/electrolyte materials typically used in solid oxide cells for energy conversion. In particular, we discuss the multifactorial environment induced chemical processes that govern the performance and longevity of solid oxide electrochemical devices. The in situ/operando Raman spectroscopic investigations on the electrode/electrolyte materials reported in the literature are summarized with the emphasis on identification of key material properties that control the functional aspects of the solid oxide cells. The molecular level understanding of the electrochemical processes will allow advancement of the rational design of electrochemical materials for process level deployment of solid oxide cell technology.

Electrodes↗
DOE OSTI2024

Lanthanum-Promoted Electrocatalyst for the Oxygen Evolution Reaction: Unique Catalyst or Oxide Deconstruction?

A conventional performance metric for electrocatalysts that promote the oxygen evolution reaction (OER) is the current density at a given overpotential. However, the assumption that increased current density at lower overpotentials indicates superior catalyst design is precarious for OER catalysts in the working environment, as the crystalline lattice is prone to deconstruction and amorphization, thus greatly increasing the concentration of catalytic active sites. We show this to be the case for La 3+ incorporation into Co 3 O 4 . Powder X-ray diffraction (PXRD), Raman spectroscopy and extended X-ray absorption fine structure (EXAFS) reveal smaller domain sizes with decreased long-range order and increased amorphization for La-modified Co 3 O 4 . This lattice deconstruction is exacerbated under the conditions of OER as indicated by operando spectroscopies. The overpotential for OER decreases with increasing La 3+ concentration, with maximum activity achieved at 17% La incorporation. HRTEM images and electron diffraction patterns clearly show the formation of an amorphous overlayer during OER catalysis that is accelerated with La 3+ addition. O 1s XPS spectra after OER show the loss of lattice-oxide and an increase in peak intensities associated with hydroxylated or defective O-atom environments, consistent with Co(O) x (OH) y species in an amorphous overlayer. Furthermore, our results suggest that improved catalytic activity of oxides incorporated with La 3+ ions (and likely other metal ions) is due to an increase in the number of terminal octahedral Co(O) x (OH) y edge sites upon Co 3 O 4 lattice deconstruction, rather than enhanced intrinsic catalysis.

Catalysts↗
DOE OSTI2024

Supramolecular Complexation-Enhanced CO 2 Chemisorption in Amine-Derived Sorbents

A supramolecular complexation approach is developed to improve the CO 2 chemisorption performance of solvent-lean amine sorbents. Operando spectroscopy techniques reveal the formation of carbamic acid in the presence of a crown ether. Here, the reaction pathway is confirmed by theoretical simulation, in which the crown ether acts as a proton acceptor and shuttle to drive the formation and stabilization of carbamic acid. Improved CO 2 capacity and diminished energy consumption in sorbent regeneration are achieved.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Enhanced Methanol Synthesis from CO 2 Hydrogenation Achieved by Tuning the Cu–ZnO Interaction in ZnO/Cu 2 O Nanocube Catalysts Supported on ZrO 2 and SiO 2

The nature of the Cu–Zn interaction and especially the role of Zn in Cu/ZnO catalysts used for methanol synthesis from CO 2 hydrogenation are still debated. Migration of Zn onto the Cu surface during reaction results in a Cu–ZnO interface, which is crucial for the catalytic activity. However, whether a Cu–Zn alloy or a Cu–ZnO structure is formed and the transformation of this interface under working conditions demand further investigation. Here, ZnO/Cu 2 O core–shell cubic nanoparticles with various ZnO shell thicknesses, supported on SiO 2 or ZrO 2 were prepared to create an intimate contact between Cu and ZnO. The evolution of the catalyst’s structure and composition during and after the CO 2 hydrogenation reaction were investigated by means of operando spectroscopy, diffraction, and ex situ microscopy methods. The Zn loading has a direct effect on the oxidation state of Zn, which, in turn, affects the catalytic performance. High Zn loadings, resulting in a stable ZnO catalyst shell, lead to increased methanol production when compared to Zn-free particles. Low Zn loadings, in contrast, leading to the presence of metallic Zn species during reaction, showed no significant improvement over the bare Cu particles. Therefore, our work highlights that there is a minimum content of Zn (or optimum ZnO shell thickness) needed to activate the Cu catalyst. Furthermore, in order to minimize catalyst deactivation, the Zn species must be present as ZnO x and not metallic Zn or Cu–Zn alloy, which is undesirably formed during the reaction when the precatalyst ZnO overlayer is too thin.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Cascade CO 2 Insertion in Carbanion Ionic Liquids Driven by Structure Rearrangement

The CO 2 chemisorption in state-of-the-art sorbents based on oxide/hydroxide/amine moieties is driven by strong chemical bonding formation in the carbonate/bicarbonate/carbamate products, which in turn leads to high energy input in sorbent regeneration. In addition, the CO 2 uptake capacity was limited by the active sites’ utilization efficiency, with each active site incorporating one CO 2 molecule or less. In this work, a new concept and generation of sorbent was developed to achieve cascade insertion of multiple CO 2 molecules by leveraging structure rearrangement as the driving force, leading to in situ generation of extra CO 2 -binding sites and significantly reduced energy input for CO 2 release. The designed ionic liquids (ILs) containing carbanions with conjugated and asymmetric structure, deprotonated (methylsulfonyl)acetonitrile ([MSA]) anion, allowed the cascade insertion of two CO 2 molecules via consecutive C–C and O–C bond formations. The proton transfer and structure rearrangement of the carboxylic acid intermediates played critical roles in stabilizing the first integrated CO 2 and generating extra electron-rich oxygen sites for the insertion of the second CO 2 . The structure variation and reaction pathway were confirmed by operando spectroscopy, magnetic resonance spectroscopy (NMR), mass spectroscopy, and computational chemistry. The energy input in sorbent regeneration could be further reduced by harnessing the phase-changing behavior of the carbanion salts in ether solutions upon reacting with CO 2 , avoiding the energy consumption in heating the solvent. In conclusion, the fundamental insights obtained herein provide a promising approach to greatly improve the CO 2 sorption performance via sophisticated molecular-scale structural engineering of the sorbents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Creating free standing covalent organic framework membranes by nanocrystal suturing in sol gel solutions

The sol-gel synthesis represents a versatile platform to fabricate ceramic inorganic membranes. However, it is still a grand challenge to push the boundary of sol-gel chemistry towards high-quality organic membrane construction. Herein, a facile and controlled nanocrystal suturing strategy in sol-gel solutions is developed to afford highly crystalline and free-standing covalent organic framework membranes. The key chemistry design lies in deploying tiny threads (1 mol% dual-NH 2 -tail linear polymer) to efficiently suture the highly charged covalent organic framework nanocrystals stabilized and confined in sol-gel solutions, creating a continuous and intact membrane surface. A subsequent treatment heals the sutured covalent organic framework nanocrystals, yielding a free-standing membrane with high crystallinity and ordered pores. The structure evolution and role of the thread linker are elucidated via operando spectroscopy and microscopy. The as-afforded covalent organic framework membranes demonstrate attractive proton transport performance in high temperature and anhydrous fuel cell applications.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Oxygen redox activities governing high-voltage charging reversibility of Ni-rich layered cathodes

A schematic illustration indicative of the improved structural reversibility through stabilizing oxidized oxygen by Al doping. The chemical reactions and phase transitions at high voltages are generally considered to determine the electrochemical properties of high-voltage layered cathodes such as Ni-rich rhombohedral oxides. Even if significantly higher SOCs (states-of-charge) are utilized above the capability of transition metal redox (primarily Ni and Co), the effect of oxygen redox on Ni-rich rhombohedral oxides still looks mysterious thereby necessitating research that can clarify the relationship between redox reactions and phase transitions. Here, we performed a comprehensive and comparative study of the cationic and anionic redox reactions, as well as the structural evolution of a series of commercial Ni-rich layered oxides with and without Al doping. We combined the results from X-ray spectroscopy, operando electrochemical mass spectrometry, and neutron diffraction with electrochemical properties and thereby revealed the different oxygen redox activities associated with structural and electrochemical degradations. We reveal that Al doping suppresses the irreversible oxygen release but enhances the lattice oxygen oxidization. With this modulated oxygen redox activity, the Ni-rich layered oxides’ notorious H2–H3 structural phase transition becomes highly reversible. Our findings disentangle the different oxygen redox activities during high-voltage cycling and clarify the role of dopants in the Ni-rich layered oxides in terms of structural and electrochemical stability, shedding light on the future direction of optimizing layered cathode materials for safer high energy-density secondary batteries.

Lee, Gi-Hyeok↗
DOE OSTI2026

Final Report for Electro-oxidative valorization of biomass: design strategies for selective and stable catalysis

This project aimed to develop a fundamental understanding of the factors that dictate activity and selectivity during electrochemical partial oxidation of multi-carbon organic molecules derived from biomass. Value-adding selective conversions of alcohols to aldehydes, and aldehydes to carboxylic acids were considered, with the ultimate goal to establish general principles for controlling selectivity in organic oxidations. Specific aims involved the use of furfural (FF) and 5-hydoxymethyfurfural (HMF) as model systems and seek to develop knowledge for control of mechanisms that permit selective conversions between oxygenate functional groups with prevention or control of C-C cleavage steps. Another major focus of the work was in achieving these transformations in acidic conditions, which contrasts most existing work (done in base), but is crucial toward compatibility with common pretreatments used to generate small molecules from lignocellulose (e.g. acid hydrolysis or pyrolysis). The work involved well-defined catalyst material synthesis, comparative kinetics, and operando spectroscopies (PI Holewinski), supported by quantum chemical simulations (PI Janik), enabling progress toward efficient, acid-stable oxidation catalysis for biomass upgrading.

Holewinski, Adam [University of Colorado Boulder] ↗
DOE OSTI2025

First in operando transient grating spectroscopy measurements on tungsten during high flux plasma operation in PISCES-RF

This work details the construction and first in operando transient grating spectroscopy measurements conducted on PISCES-RF during plasma operation. A preliminary study on a tungsten sample with varied plasma species (Ar and D 2 ), ion flux (4 × 10 21 to 6 × 10 22 ion/m 2 /s), ion energy (5 to 80 eV), and surface temperature (20 to 200 °C) is presented. Prior to plasma exposure, the thermal diffusivity and surface acoustic wave (SAW) speed, (6.9 ± 0.2) × 10 −5 m 2 /s and (2.66 ± 0.02) km/s, were measured in situ with a thermal grating period of 12.5 μm. During Ar plasma exposure, these two quantities vary according to the sample surface temperature. At low flux and varied ion energy, D 2 plasma exposure also results in thermal diffusivity and SAW speed varying with surface temperature alone. At high flux, D 2 plasma exposure results in no convincing change to the thermal diffusivity, but the SAW speed is reduced. After returning to 20 °C, post plasma exposures, the thermal diffusivity and SAW speed almost recover to the initial value prior to exposure.

Surface acoustic wave SAW↗
DOE OSTI2024

Operando Surface-Enhanced Infrared Spectroscopy Connects Interfacial Dynamics with Reaction Kinetics During Electrochemical CO 2 Reduction on Copper

The reaction microenvironment plays a key role in dictating the selectivity of electrochemical CO 2 reduction. However, understanding the chemical nature of this microenvironment under operating conditions remains a substantial challenge. For this study, we employed attenuated total reflectance surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS) in operando for simultaneous measurements of reaction kinetics and concentrations of reactants and intermediates at the reaction interface, all under controlled mass transport conditions. These operando measurements enable direct correlations between the reaction microenvironment, mass transport, and kinetics for a Cu electrocatalyst, such as higher local concentrations of CO 2 under faster mass transport corresponding to higher rates of CO 2 reduction. We observed that faster mass transport decreased the *CO coverage at less negative potentials (-0.6 V RHE ) and increased the *CO coverage at more negative potentials (-1.1 V RHE ). We developed a transport-coupled kinetic model that captures these spectroscopic observations and provides insight into the processes controlling interfacial concentrations of reactants and intermediates, aiding future efforts toward tailoring reaction microenvironments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Ionic Pairs-Engineered Fluorinated Covalent Organic Frameworks Toward Direct Air Capture of CO 2

The covalent organic frameworks (COFs) possessing high crystallinity and capability to capture low-concentration CO 2 (400 ppm) from air are still underdeveloped. The challenge lies in simultaneously incorporating high-density active sites for CO 2 insertion and maintaining the ordered structure. Herein, a structure engineering approach is developed to afford an ionic pair-functionalized crystalline and stable fluorinated COF (F-COF) skeleton. The ordered structure of the F-COF is well maintained after the integration of abundant basic fluorinated alcoholate anions, as revealed by synchrotron X-ray scattering experiments. The breakthrough test demonstrates its attractive performance in capturing (400 ppm) CO 2 from gas mixtures via O$-$C bond formation, as indicated by the in situ spectroscopy and operando nuclear magnetic resonance spectroscopy using 13 C-labeled CO 2 sources. Both theoretical and experimental thermodynamic studies reveal the reaction enthalpy of ≈-40 kJ mol -1 between CO 2 and the COF scaffolds. This implies weaker interaction strength compared with state-of-the-art amine-derived sorbents, thus allowing complete CO 2 release with less energy input. The structure evolution study from synchrotron X-ray scattering and small-angle neutron scattering confirms the well-maintained crystalline patterns after CO 2 insertion. In conclusion, the as-developed proof-of-concept approach provides guidance on anchoring binding sites for direct air capture (DAC) of CO 2 in crystalline scaffolds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Identification of In Situ Generated High-Spin Fe(II)-N 4 Active Sites for Acidic Oxygen Reduction Reaction via Operando 57 Fe Mössbauer Spectroscopy

Iron-nitrogen-carbon (FeNC) catalysts are considered among the most promising alternative to Pt catalysts in acidic oxygen reduction reaction (ORR), yet the geometric and electronic structures of the true active site under reaction conditions have not been clearly elucidated. Herein, we synthesized a representative FeNC catalyst by pyrolyzing Fe 3+ absorbed on ZIF-8-derived N-doped carbon at a mild temperature under the H 2 /Ar atmosphere, where a formation mechanism of FeN 4 sites through a Zn-mediated Fe nanoparticle atomization process was proposed. The resulting FeNC-750 catalyst shows high acidic ORR activity with a half-wave potential of 0.838 V and a peak power density of 1 W cm -2 in proton-exchange membrane fuel cell (PEMFC). By using operando 57 Fe Mössbauer spectroscopy on FeNC-750, it was revealed that the pyrrolic N-coordinated high-spin Fe 2+ N 4 sites, which are in situ generated from high-spin Fe 3+ N 4 during ORR, are identified as catalytic active states. Density functional theory calculations further verified that, compared to the pyridinic N-coordinated low-spin Fe 2+ N 4 , the pyrrolic N-coordinated high-spin Fe 2+ exhibits optimized adsorption energy for reaction intermediates, thereby lowering the energy barrier of the rate-determining step (RDS) and facilitating OH* desorption. In conclusion, this work provides both experimental and theoretical evidence of the true active site in the FeNC during acidic ORR, offering significant insights for the rational design of high-performance materials for acidic fuel cells.

FeNC catalyst↗
DOE OSTI2025

Deciphering the local structure of Prussian blue analogue cathodes with Raman spectroscopy for sodium-ion batteries

Iron-based Prussian blue analogues (PBAs) have gained attention as low-cost, relatively higher-potential cathodes for sodium-ion batteries, due to their open 3D-framework structures. However, understanding the local structural changes is critical to unveiling the intercalation pathways and degradation mechanisms. We employ here operando Raman spectroscopy to probe the changes in the cyanide vibrational modes during cycling and degradation after cycling, which are not adequately resolved by X-ray diffraction due to the low structure factor and limited X-ray sensitivity of the cyanide groups. Vibrational spectroscopy has thus proven essential for deciphering these complex materials. Additionally, we implement pre-sodiation strategies to assess the impact of sodium inventory loss by pairing PBAs with a hard carbon anode in a full-cell configuration. Operando galvanostatic electrochemical impedance spectroscopy (EIS) and ex situ X-ray photoelectron spectroscopy (XPS) further elucidate the interface evolution and the role of water molecules in forming the cathode-electrolyte interphase (CEI) and solid-electrolyte interphase (SEI). The insights gained advance the understanding of PBAs and enhance their practical viability.

25 ENERGY STORAGE↗
DOE OSTI2024

Monitoring Redox Processes in Lithium-Ion Batteries by Laboratory-Scale Operando X-ray Emission Spectroscopy

Tracking changes in the chemical state of transition metals in alkali-ion batteries is crucial to understanding the redox chemistry during operation. X-ray absorption spectroscopy (XAS) is often used to follow the chemistry through observed changes in the chemical state and local atomic structure as a function of the state-of-charge (SoC) in batteries. In this study, we utilize an operando X-ray emission spectroscopy (XES) method to observe changes in the chemical state of active elements in batteries during operation. Operando XES and XAS were compared by using a laboratory-scale setup for four different battery systems: LiCoO 2 (LCO), Li[Ni 1/3 Co 1/3 Mn 1/3 ]O 2 (NMC111), Li[Ni 0.8 Co 0.1 Mn 0.1 ]O 2 (NMC811), and LiFePO 4 (LFP) under a constant current charging the battery in 10 h (C/10 charge rate). We show that XES, despite narrower chemical shifts in comparison to XAS, allows us to fingerprint the battery SOC in real time. We further demonstrate that XES can be used to track the change in net spin of the probed atoms by analyzing changes in the emission peak shape. As a test case, the connection between net spin and the local chemical and structural environment was investigated by using XES and XAS in the case of electrochemically delithiated LCO in the range of 2–10% lithium removal.

25 ENERGY STORAGE↗
DOE OSTI2025

Lewis Acid Site Engineering in Chromite Spinels Orchestrated Surface Reconstruction and Surpasses RuO 2 in Oxygen Evolution

Atomic-scale engineering of chromite spinels featuring redox-active tetrahedral A-sites and strong Cr–O covalency offers a promising route to superior platinum-group-metal-free oxygen evolution reaction (OER) catalysts. However, comprehensive studies addressing how cation substitution influences surface chemistry and governs OER activity and durability in chromite spinels remain limited. Here, in this work, a systematic investigation of the multicationic chromite series Ni x Fe y Cr 3−x−y O 4 is presented, identifying composition-dependent Lewis acidity as a descriptor of superior OER performance. It is further demonstrated that tuning surface acidity directly controls dynamic reconstruction processes and lattice-oxygen participation during spinel-based electrocatalysis. Following activation, the optimized Ni 0.8 Fe 0.3 Cr 1.9 O 4 catalyst delivers a current density of 10 mA cm −2 at an overpotential of 235 mV, surpassing RuO 2 , with excellent long-term stability. Integrating microscopic and spectroscopic analysis with operando impedance spectroscopy, it shows that activation generates an oxyhydroxide overlayer and reveals a previously unrecognized link between surface Lewis acidity and the growth kinetics and activity of these shells. Density functional theory calculations indicate that Fe incorporation at octahedral sites raises the O 2p-band center and lowers oxygen-vacancy formation energy, promoting lattice-oxygen activation and triggering reconstruction, yielding enhanced OER. This work integrates cation-driven surface-acidity modulation, acidity-governed reconstruction, and OER activity enhancement into a unified predictive framework for designing earth-abundant spinel-based catalysts.

operando impedance spectroscopy↗
DOE OSTI2024

Active species in chloroaluminate ionic liquids catalyzing low-temperature polyolefin deconstruction

Abstract Chloroaluminate ionic liquids selectively transform (waste) polyolefins into gasoline-range alkanes through tandem cracking-alkylation at temperatures below 100 °C. Further improvement of this process necessitates a deep understanding of the nature of the catalytically active species and the correlated performance in the catalyzing critical reactions for the tandem polyolefin deconstruction with isoalkanes at low temperatures. Here, we address this requirement by determining the nuclearity of the chloroaluminate ions and their interactions with reaction intermediates, combining in situ 27 Al magic-angle spinning nuclear magnetic resonance spectroscopy, in situ Raman spectroscopy, Al K-edge X-ray absorption near edge structure spectroscopy, and catalytic activity measurement. Cracking and alkylation are facilitated by carbenium ions initiated by AlCl 3 - tert -butyl chloride (TBC) adducts, which are formed by the dissociation of Al 2 Cl 7 − in the presence of TBC. The carbenium ions activate the alkane polymer strands and advance the alkylation cycle through multiple hydride transfer reactions. In situ 1 H NMR and operando infrared spectroscopy demonstrate that the cracking and alkylation processes occur synchronously; alkenes formed during cracking are rapidly incorporated into the carbenium ion-mediated alkylation cycle. The conclusions are further supported by ab initio molecular dynamics simulations coupled with an enhanced sampling method, and model experiments using n-hexadecane as a feed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗