Search NASA⌕ Search

SEARCH · Search NASA

Results for “optical conductivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

Optical conductivity of alpha-Mn

The optical constants were measured at room temperature in the photon-energy range 0.6 to 6.5 eV on evaporated thin films. Evaporation conditions were chosen that gave the alpha-Mn crystal structure with reasonably large grains. The optical conductivity was separated into intraband and interband contributions by fitting to the Drude formula at low energies. The results are anomalous in comparison to other 3d transition metals. The free-electron lifetime is exceptionally sort (in agreement with the large dc resistivity of Mn), and the interband transitions seem unusually weak at the lower energies. Possible explanations related to the complicated crystal structure of alpha-Mn are discussed.

Scoles, K. J.↗
NASA NTRS1982

Optical conductivity of alpha-Mn

The optical constants were measured at room temperature in the photon-energy range 0.6-6.5 eV on evaporated thin films. Evaporation conditions were chosen that gave the alpha-Mn crystal structure with relatively large grains. The optical conductivity was separated into intraband and interband contributions by fitting to the Drude formula at low energies. The results are anomalous in comparison to other 3d transition metals: the free-electron lifetime is exceptionally short (in agreement with the large dc resistivity of Mn), and the interband transitions seem unusually weak at the lower energies. Possible explanations related to the complicated crystal structure of alpha-Mn with its loss of point symmetry at the atom sites are discussed.

Scoles, K. J.↗
DOE OSTI2025

Optical conductivity study of mixed-valent quasi-one-dimensional CeIr 3 ⁢B 2

Here, we present a combined theoretical and experimental study on the optical conductivity of CeIr 3 ⁢B 2 , where quasi-one-dimensional Ce chains form along the 𝑐 axis of the monoclinic crystal. Significant hybridization-induced features are observed along the Ce chains by broadband infrared spectroscopy, demonstrating mixed-valent behavior over a wide range of temperatures (6–300 K) and energies (up to 0.8 eV). The ferromagnetic transition at 41 K had no noticeable influence on the temperature evolution of the optical conductivity. A comparison with density functional theory plus dynamic mean-field theory calculations demonstrates the quasi-one-dimensional nature of CeIr 3 ⁢B 2 and the local character of the interactions responsible for the electronic renormalization. Furthermore, we demonstrate how the spectroscopic signatures of this mixed-valent compound are captured by theory, providing a clear distinction from the response expected in the integer-valent Kondo regime.

36 MATERIALS SCIENCE↗
NASA NTRS1981

Intraband optical conductivity sigma/omega,T/ of Cu, Ag, and Au - Contribution from electron-electron scattering

The frequency and temperature dependence of the intraband optical conductivity of the noble metals Cu, Ag and Au is measured and contributions of electron-electron scattering are assessed. Optical measurements were performed at temperatures of 77, 295 and 425 K to obtain values of the Drude electron scattering rate with a linear dependence on temperature which may be attributed to electron-phonon scattering, and a quadratic dependence on photon energy, which is suggestive of electron-electron scattering but is a factor of two to three times greater than would be expected. Comparison of the optical data with dc electrical and thermal resistivity data which also show behavior attributed to electron-electron scattering reveals discrepancies of up to an order of magnitude. Other possible mechanisms for the frequency dependence, including absorptance, electron-surface plasmon interactions, a two-carrier model, and a structure dependence are considered, and it is concluded that the frequency dependence in the Drude scattering rates of the noble metals is not yet quantitatively understood

Parkins, G. R.↗
NASA NTRS1982

Optical conductivity of amorphous Ta and beta-Ta films

Tantalum films evaporated in high vacuum onto liquid-nitrogen-cooled substrates had an amorphous structure that persisted even after warming to room temperature. The optical conductivity (as well as the dc conductivity) of the amorphous films differed significantly from that of the bcc films.

Nestell, J. E., Jr.↗
DOE OSTI2026

Optical conductivity of layered topological semimetal TaNiTe 5

Here, we present an infrared spectroscopy study of the layered topological semimetal TaNiTe 5 , a material with a quasi-one-dimensional structure and strong in-plane anisotropy. Despite its structural features, infrared reflectivity and electronic transport measurements along the 𝑎 and 𝑐 crystallographic axes show metallic behavior without evidence of reduced dimensionality. Optical conductivity reveals an anisotropic but conventional metallic response with low scattering rates and a single sharp infrared-active phonon mode at 396cm −1 ⁢(49meV). Ab initio calculations closely match the experimental optical data and confirm a three-dimensional electronic structure. Our results demonstrate that TaNiTe 5 behaves as a three-dimensional anisotropic semimetal in its electronic and optical properties.

36 MATERIALS SCIENCE↗
NASA NTRS2009

Electrically conductive, optically transparent polymer/carbon nanotube composites and process for preparation thereof

The present invention is directed to the effective dispersion of carbon nanotubes (CNTs) into polymer matrices. The nanocomposites are prepared using polymer matrices and exhibit a unique combination of properties, most notably, high retention of optical transparency in the visible range (i.e., 400 800 nm), electrical conductivity, and high thermal stability. By appropriate selection of the matrix resin, additional properties such as vacuum ultraviolet radiation resistance, atomic oxygen resistance, high glass transition (T.sub.g) temperatures, and excellent toughness can be attained. The resulting nanocomposites can be used to fabricate or formulate a variety of articles such as coatings on a variety of substrates, films, foams, fibers, threads, adhesives and fiber coated prepreg. The properties of the nanocomposites can be adjusted by selection of the polymer matrix and CNT to fabricate articles that possess high optical transparency and antistatic behavior.

Park, Cheol↗
NASA NTRS2011

Electrically Conductive, Optically Transparent Polymer/Carbon Nanotube Composites and Process for Preparation Thereof

The present invention is directed to the effective dispersion of carbon nanotubes (CNTs) into polymer matrices. The nanocomposites are prepared using polymer matrices and exhibit a unique combination of properties, most notably, high retention of optical transparency in the visible range (i.e., 400-800 nm), electrical conductivity, and high thermal stability. By appropriate selection of the matrix resin, additional properties such as vacuum ultraviolet radiation resistance, atomic oxygen resistance, high glass transition (T.sub.g) temperatures, and excellent toughness can be attained. The resulting nanocomposites can be used to fabricate or formulate a variety of articles such as coatings on a variety of substrates, films, foams, fibers, threads, adhesives and fiber coated prepreg. The properties of the nanocomposites can be adjusted by selection of the polymer matrix and CNT to fabricate articles that possess high optical transparency and antistatic behavior.

Connell, John W.↗
NASA NTRS2011

Electrically conductive, optically transparent polymer/carbon nanotube composites

The present invention is directed to the effective dispersion of carbon nanotubes (CNTs) into polymer matrices. The nanocomposites are prepared using polymer matrices and exhibit a unique combination of properties, most notably, high retention of optical transparency in the visible range (i.e., 400-800 nm), electrical conductivity, and high thermal stability. By appropriate selection of the matrix resin, additional properties such as vacuum ultraviolet radiation resistance, atomic oxygen resistance, high glass transition (T.sub.g) temperatures, and excellent toughness can be attained. The resulting nanocomposites can be used to fabricate or formulate a variety of articles such as coatings on a variety of substrates, films, foams, fibers, threads, adhesives and fiber coated prepreg. The properties of the nanocomposites can be adjusted by selection of the polymer matrix and CNT to fabricate articles that possess high optical transparency and antistatic behavior.

Connell, John W.↗
NASA NTRS2009

Electrically Conductive, Optically Transparent Polymer/Carbon Nanotube Composites and Process for Preparation Thereof

The present invention is directed to the effective dispersion of carbon nanotubes (CNTs) into polymer matrices. The nanocomposites are prepared using polymer matrices and exhibit a unique combination of properties, most notably, high retention of optical transparency in the visible range (i.e., 400-800 nm), electrical conductivity, and high thermal stability. By appropriate selection of the matrix resin, additional properties such as vacuum ultraviolet radiation resistance, atomic oxygen resistance, high glass transition (T(sub g)) temperatures, and excellent toughness can be attained. The resulting nanocomposites can be used to fabricate or formulate a variety of articles such as coatings on a variety of substrates, films, foams, fibers, threads, adhesives and fiber coated prepreg. The properties of the nanocomposites can be adjusted hy selection of the polymer matrix and CNT to fabricate articles that possess high optical transparency and antistatic behavior.

Park, Cheol↗
NASA NTRS1983

Electrically conductive black optical paint

An electrically conductive flat black paint has been developed for use on the Galileo spacecraft which will orbit Jupiter in the late 1980s. The paint, designed for equipment operating in high-energy radiation fields, has multipurpose functions. Its electrical conductivity keeps differential charging of the spacecraft external surfaces and equipment to a minimum, preventing the buildup of electrostatic fields and arcing. Its flat black aspect minimizes the effects of stray light and unwanted reflectances, when used in optical instruments and on sunshades. Its blackness is suitable, also, for thermal control, when the paint is put on spacecraft surfaces. The paint has good adherence properties, as measured by tape tests, when applied properly to a surface. The electrically conductive paint which was developed has the following characteristics: an electrical resistivity of 5 x 10 to the 7th ohms per square; a visual light total reflectance of approximately 5 percent; an infrared reflectance of 0.13 measured over a spectrum from 10 to the (-5.5) power to 0.001 meter; a solar absorptivity, alpha-s, of 0.93, and a thermal emissivity, epsilon, of 0.87, resulting in an alpha-s/epsilon of 1.07. The formula for making the paint and the process for applying it are described.

Birnbaum, M. M.↗
DOE OSTI2025

Second harmonic generation in topological insulators under quantizing magnetic fields

We theoretically investigate the second harmonic generation (SHG) of topological insulator surface states in a perpendicular magnetic field. Our theory is based on the microscopic expression of the second-order magneto-optical conductivity developed from the density matrix formalism, taking into account hexagonal warping effects on the surface states' band structure. Using numerically exact Landau-level energies and wave functions including hexagonal warping, we calculate the spectrum of SHG conductivities under normal incidence for different values of magnetic field and chemical potential. The imaginary parts of the SHG conductivities show prominent resonant peaks corresponding to one-photon and two-photon inter-Landau-level transitions. Treating the hexagonal warping term perturbatively, these transitions are clarified analytically within a perturbation theory from which approximate selection rules for the allowable optical transitions for SHG are determined. Furthermore, our results show extremely high SHG susceptibility that is easily tunable by magnetic field and doping level for topological surface states in the far-infrared regime, exceeding that of many conventional nonlinear materials. This work highlights the key role of hexagonal warping effects in generating second-order optical responses and provides insights into the nonlinear magneto-optical properties of the topological insulators.

Landau levels↗
NASA NTRS1980

Structure and optical properties of evaporated films of the Cr- and V-group metals

Thin films of Cr, Mo, and W rapidly evaporated in high vacuum (5 x 10 to the -7th torr) onto room-temperature substrates show anomalously low reflectance (compared to bulk samples). From electron and X-ray diffraction and electron microscopy, the normal bcc crystal structure is found, but with very fine grains. Columnar grains about 100 A in diameter were separated by a less dense grain-boundary network about 10-A wide. The measured optical conductivity agrees with an inhomogeneous-medium model that assumes the normal crystalline conductivity for the grain interiors, with model parameters that correlate to the observed columnar grain size. In contrast, V and Nb films rapidly evaporated onto room-temperature substrates have the reflectance of bulk crystalline material. On liquid-nitrogen temperature substrates, however, V and Nb have normal bcc crystal structure but with small flat-plate grains, and the same model, with appropriate parameters, accounts for the optical conductivity. The difference between these two groups apparently depends on residual gases segregated at the grain boundaries in the Cr-group films.

Nestell, J. E., Jr.↗
NASA NTRS2011

JPL Thermal Design Modeling Philosophy and NASA-STD-7009 Standard for Models and Simulations - A Case Study

The Standard JPL thermal engineering practice prescribes worst-case methodologies for design. In this process, environmental and key uncertain thermal parameters (e.g., thermal blanket performance, interface conductance, optical properties) are stacked in a worst case fashion to yield the most hot- or cold-biased temperature. Thus, these simulations would represent the upper and lower bounds. This, effectively, represents JPL thermal design margin philosophy. Uncertainty in the margins and the absolute temperatures is usually estimated by sensitivity analyses and/or by comparing the worst-case results with "expected" results. Applicability of the analytical model for specific design purposes along with any temperature requirement violations are documented in peer and project design review material. In 2008, NASA released NASA-STD-7009, Standard for Models and Simulations. The scope of this standard covers the development and maintenance of models, the operation of simulations, the analysis of the results, training, recommended practices, the assessment of the Modeling and Simulation (M&S) credibility, and the reporting of the M&S results. The Mars Exploration Rover (MER) project thermal control system M&S activity was chosen as a case study determining whether JPL practice is in line with the standard and to identify areas of non-compliance. This paper summarizes the results and makes recommendations regarding the application of this standard to JPL thermal M&S practices.

thermal blanket performance↗
DOE OSTI2026

First-Principles Discovery of Novel LiInP 2 S 6 Polymorphs with Promising Optoelectronic Responses

Recent advances in two-dimensional (2D) van der Waals (vdW) metal thiophosphates have attracted considerable attention due to their promising ionic conductivity, optical characteristics, and tunable physical properties. Within this material family, LiInP 2 S 6 has emerged as an intriguing candidate, not only because of its sensitivity to air and moisture but also due to its suitable band gap within the UV−vis range, enabling potential optoelectronic and photocatalytic applications. In this study, through comprehensive first-principles investigations, we unveil two previously unreported polymorphs of LiInP 2 S 6 in the monoclinic C2/c and trigonal P3̅1c (in-gap) space groups, in addition to examining the experimentally synthesized P3̅1c (in-layer) phase. Our studies identify the C2/c structure as the ground state, lying 9 meV per unit cell lower in energy than the experimentally realized trigonal P3̅1c (in-layer) phase. Further, we systematically examine the elastic, mechanical, thermodynamical, dynamical, electronic, and optical properties of all three polymorphs, confirming their mechanical, thermal, and dynamical stability. Notably, the P3̅1c (in-gap) phase exhibits enhanced stiffness, while the calculated indirect band gaps and strong photon absorption in the UV−vis range (∼3 eV) highlight the potential of the studied LiInP 2 S 6 phases for iontronic devices and optoelectronic applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Unraveling the Mechanism of Interfacial Charge Transfer and Photoresponsivity of WS 2 Quantum Dots/MoS 2 (0D–2D) Heterostructure-Based Transistors

To assess the efficacy of a mixed-dimensional van der Waals (vdW) heterostructure in modulating the optoelectronic responses of nanodevices, the charge transport properties of the transition-metal dichalcogenide (TMD)-based heterostructure comprising zero-dimensional (0D) WS 2 quantum dots (QDs) and two-dimensional (2D) MoS 2 flakes are critically analyzed. Herein, a facile strategy was materialized in developing an atomically thin phototransistor assembled from mechanically exfoliated MoS 2 and WS 2 QDs synthesized using a one-pot hydrothermal route. The amalgamated photodetectors exhibited a high responsivity of ∼8000 A/W at an incident power of 0.05 nW of white light, surpassing that of the pristine MoS 2 devices. Furthermore, the detectivity of pristine MoS 2 , which was on the order of 10 10 , increased to 10 12 Jones for the WS 2 QDs/MoS 2 heterostructure photodetector, outperforming other WS 2 -based materials. The quasiparticle band gap and density of states (DOS) are further analyzed to elucidate the photophysics of the WS 2 QD/MoS 2 hybrid assembly. The difference in the work function between MoS 2 and WS 2 QDs gives rise to an electric field across the 0D–2D interface, facilitating effective charge separation and migration and contributing to the enhancement of photoresponsivity. The analysis of optical responses using density functional theory (DFT) revealed stronger absorption and less reflection over a broader spectrum of wavelengths for the heterostructure compared to the pristine materials. The estimated optical conductivity aligns well with the experimentally predicted maximum photoresponsivity under visible light, which is attributed to the high absorbance of 2D MoS 2 . In conclusion, combining diverse spectroscopic and imaging techniques with quantum simulation provides insights that clarify the pertinence of 0D–2D TMDs in designing phototransistors.

WS2 QDs/MoS2 heterostructure↗
DOE OSTI2025

Ultrabroadband THz conductivity of gated graphene in- and out-of-equilibrium

We employ ultrabroadband terahertz (THz) spectroscopy to expose the high-frequency transport properties of Dirac fermions in monolayer graphene. By controlling the carrier concentration via tunable electrical gating, both equilibrium and transient optical conductivities are obtained for a range of Fermi levels. The frequency-dependent equilibrium response is determined through a combination of time-domain THz and Fourier-transform infrared spectroscopy for energies up to the near-infrared, which also provides a measure of the gate-voltage dependent Fermi level. Transient changes in the real and imaginary parts of the graphene conductivity are electro-optically resolved for frequencies up to 15 THz after near-infrared femtosecond excitation, both at the charge-neutral point and for higher electrostatic-doping levels. Modeling of the THz response provides insight into changes of the carrier spectral weights and scattering rates, and reveals an additional broad-frequency ($$\approx$$ 8 THz) component to the photo-induced response, which we attribute to the zero-momentum mode of quantum-critical transport observed here in large-area CVD graphene.

Coslovich, G↗