Search NASA⌕ Search

SEARCH · Search NASA

Results for “optical structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Innovative solutions to improve laser damage thresholds of optical structures

Optical structures, including thin film designs and components with topography, are provided that achieve significantly improved laser damage thresholds and/or ultra-low-loss. These advances may be achieved by utilizing a bulk window including a material having a band gap that is at least 5.0 eV and a thickness. The bulk window can be configured to increase the laser induced damage threshold of the underlying optical structure.

Nguyen, Hoang T.↗
DOE OSTI2021

Structural, Optical, and Electronic Properties of Two Quaternary Chalcogenide Semiconductors: Ag 2 SrSiS 4 and Ag 2 SrGeS 4

Quaternary chalcogenide materials have long been a source of semiconductors for optoelectronic applications. Recent studies on the I2-II-IV-X4 (I = Ag, Cu, Li; II = Ba, Sr, Eu, Pb; IV = Si, Ge, Sn; X = S, Se) materials have shown particular versatility and promise among these compounds. These semiconductors take advantage of a diverse bonding scheme and chemical differences among cations to target a degree of anti-site defect resistance. Within this set of compounds, the materials containing both Ag and Sr have not been experimentally studied and leave a gap in the full understanding of the family. Here, we have synthesized powders and single crystals of two Ag- and Sr-containing compounds, Ag 2 SrSiS 4 and Ag 2 SrGeS 4 , each found to form in the tetragonal I4¯2m structure of Ag 2 BaGeS 4 . During the synthesis targeting the title compounds, two additional materials, Ag 2 Sr 3 Si 2 S 8 and Ag 2 Sr 3 Ge 2 S 8 , have also been identified. Furthermore, these cubic compounds represent impurity phases during the synthesis of Ag 2 SrSiS 4 and Ag 2 SrGeS 4 . We show through hybrid density functional theory calculations that Ag 2 SrSiS 4 and Ag 2 SrGeS 4 have highly dispersive band edge states and indirect band gaps, experimentally measured as 2.08(1) and 1.73(2) eV, respectively. Second-harmonic generation measurements on Ag 2 SrSiS 4 and Ag 2 SrGeS 4 powders show frequency doubling capabilities in the near-infrared range.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Extremely Lightweight Optical Structures for Rapid Deployment

The structures that surround and support optical components play a key role in the performance of the overall optical system. For aerospace applications, creating an opto-mechanical structure that is athermal, lightweight, robust, and can be quickly developed from concept through to hardware is challenging. This project demonstrates a design and fabrication method for optical structures using origami-style folded, photo-etched sheetmetal pieces that are micro-welded to each other or to 3d printed metal components. Thin flexures, critical for athermal mounting of optics, can be thinner with sheetmetal than from standard machining, which leads to more compact designs and the ability to mount smaller optics. Building a structure by starting with the thinnest features, then folding that thin material to make the ''thicker'' sections is the opposite of standard machining (cutting thin features from thicker blocks). A design method is shown with mass savings of >90%, and stiffness to weight ratio improvements of 5x to 10x compared to standard methods for space systems hardware. Designs and processes for small, flexured, actively aligned systems are demonstrated as are methods for producing lightweight, structural, Miura-core sandwich panels in both flat and curved configurations. Concepts for deployable panels and component hinges are explored, as is a lens subcell with tunable piston movement with temperature change and an ultralight sunshade.

42 ENGINEERING↗
DOE OSTI2023

Structural, optical, and thermal properties of BN thin films grown on diamond via pulsed laser deposition

Heterostructures based on ultrawide-bandgap (UWBG) semiconductors (bandgap > 4.0 eV), such as BN and diamond, hold significant importance for the development of high-power electronics in the next generation. However, achieving in situ heteroepitaxy of BN/diamond or vice versa remains exceptionally challenging due to the complex growth kinetics involved. In this work, we grew BN thin film on (100) single-crystal diamonds using pulsed laser deposition and investigated its structural, magnetic, optical, and thermal properties. Throughout this study, the structural analyses confirmed the growth of BN films, which exhibited diamagnetic behavior at room temperature. Notably, the film demonstrated anisotropic refractive index characteristics within the visible-to-near-infrared wavelength range. The room-temperature cross-plane thermal conductivity of BN is 1.53 ± 0.77 W/mK, while the thermal conductance of the BN/diamond interface is 20 ± 2 MW/m 2 ⁢K. These findings have significant implications for a range of device applications based on UWBG BN/diamond heterostructures.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Ionization-Based Optical Structures for the Control of Short-Pulse Lasers (Abbreviated LDRD Report)

The intensity of light from the highest-power lasers is limited by the size of the optics required to amplify, compress, transport, and focus a laser beam. Indeed, optics damage puts strict constraints on the laser energy density that solid optics can sustain; this leads to enormous optics sizes and limits the maximum intensity that these lasers can achieve. In this project we investigated new types of diffractive optics based on mixtures of neutral gas and plasmas. The basic idea is to interfere laser beams in a gas near the ionization threshold, so that plasma is created in the constructive interference regions (i.e., the “bright” fringes of the interference pattern) while the destructive interference regions remain a neutral gas. The resulting refractive index modulation, due to the different indices in gas vs. plasma, effectively turns such structures into diffractive optics elements. We proposed several new types of optics based on this general concept: i) reflection gratings, which can act as mirrors of “pulse cleaners” to eliminate laser pre-pulse; ii) transmission gratings, as part of a new type of pulse compression scheme with the potential to achieve laser intensities orders of magnitude above what is currently feasible using solid-state optics; and iii) holographic lenses, to focus high-power lasers. We conducted laboratory experiments which demonstrated high efficiency reflection gratings, paving the way for practical applications of our new concepts.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

Ionization-Based Optical Structures for the Control of Short-Pulse Lasers (Full LDRD Report)

High-power lasers require enormous beam sizes to avoid optics damage; without plasma control of light, future higher-power systems will have prohibitive costs. The laser-induced formation of ionization patterns in gases provides an opportunity to manipulate the spatial and temporal properties of femtosecond to picosecond beams with precise control at high intensity, providing a path towards compact multi-petawatt lasers. In this project, we proposed new concepts of diffractive optics elements relying on ionization-based structures, including a holographic lens and a compression grating. The theoretical characterization of these optical elements was supported by particle-in-cell simulations. Experiments have been carried out to achieve reflective elements (i.e., plasma-based gratings) that demonstrated high robustness and efficiencies on the order of 50%, which validates the feasibility of our new concepts and paves the way for future plasma-based high-power laser systems.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

Elusive Double Perovskite Iodides: Structural, Optical, and Magnetic Properties

Halide double perovskites [A 2 M I M III X 6 ] are an important class of materials that have garnered substantial interest as non-toxic alternatives to conventional lead iodide perovskites for optoelectronic applications. While numerous studies have examined chloride and bromide double perovskites, reports of iodide double perovskites are rare, and their definitive structural characterization has not been reported. Predictive models have aided us here in the synthesis and characterization of five iodide double perovskites of general formula Cs 2 NaLnI 6 (Ln=Ce, Nd, Gd, Tb, Dy). Finally, the complete crystal structures, structural phase transitions, optical, photoluminescent, and magnetic properties of these compounds are reported.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

A-Cation-Dependent Structure–Optical Property Relationships of Halide Perovskite Heterostructures with Complex Interfaces

Halide perovskite heterostructures offer promising interfacial interactions for energy conversion, yet challenges in synthesizing structurally well-defined systems limit detailed investigations into structure–property relationships. In this article, we report the synthesis of compositionally controlled 3D/3D and 3D/2D halide perovskite heterostructures using evaporation crystallization-polymer pen lithography (EC-PPL) and a single-particle analysis of their properties. By systematically varying A-site cation combinations and crystal dimensions, we show that heterointerfaces induce local lattice distortions that modulate vibrational dynamics and electron-phonon coupling. These interfacial effects result in significantly extended carrier lifetimes compared to compositionally similar pure phases. Raman spectroscopy, temperature-dependent photoluminescence, and power-dependent emission analysis reveal that localized structural modulations at the interface govern exciton-phonon interactions. These effects are magnified in smaller crystals due to increased interfacial contributions. Our findings highlight the critical role of interface-driven lattice control in tuning the optoelectronic properties of halide perovskites and provide design principles for engineering heterostructures in next-generation optoelectronic devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Crystal Structures, Optical Behavior, and Magnetic Properties in Hydrated Lanthanide Iron Sulfates

Single crystals of LnFe(SO 4 ) 3 (H 2 O) 2 (Ln = La, Ce, Pr, Nd, Sm, Eu, Gd, Dy, Ho, Er, Tm; compounds 1–11) and LnFe(SO 4 ) 3 (H 2 O) (Ln = Tm, Yb, Lu; compounds 12–14) were synthesized under hydrothermal conditions. Single-crystal X-ray diffraction (SCXRD) analysis revealed that the dihydrated compounds (1–11) crystallize in centrosymmetric (CS) structures, with the lanthanide ions adopting eight-coordinate geometries. In contrast, the monohydrated compounds (12–14) exhibit noncentrosymmetric (NCS) structures, where the lanthanide ions are seven-coordinated. Vibrating sample magnetometry (VSM) confirmed that compounds 2, 4, and 7–11 are paramagnetic below 400 K, with compound 8 displaying the highest magnetic susceptibility. Compounds 1, 5, 6, 13, and 14 show a sharp increase in magnetic susceptibility at Néel temperatures ( T N ) of approximately 72, 76, 70, 58, and 56 K, respectively, indicating antiferromagnetic ordering. High-temperature magnetic susceptibility measurements further support the presence of antiferromagnetic transitions in these compounds. Second harmonic generation (SHG) measurements showed that the noncentrosymmetric Yb (compound 13) and Lu (compound 14) compounds exhibit SHG intensities of 0.3× and 1.6× that of potassium dihydrogen phosphate (KDP), respectively.

anions↗
DOE OSTI2022

Structural, Optical and Mechanical Properties of Nanocrystalline Molybdenum Thin Films Deposited under Variable Substrate Temperature

Molybdenum (Mo), which is one among the refractory metals, is a promising material with a wide variety of technological applications in microelectronics, optoelectronics, and energy conversion and storage. However, understanding the structure–property correlation and optimization at the nanoscale dimension is quite important to meet the requirements of the emerging nanoelectronics and nanophotonics. In this context, we focused our efforts to derive a comprehensive understanding of the nanoscale structure, phase, and electronic properties of nanocrystalline Mo films with variable microstructure and grain size. Molybdenum films were deposited under varying temperature (25–500 °C), which resulted in Mo films with variable grain size of 9–22 nm. The grazing incidence X-ray diffraction analyses indicate the (110) preferred growth behavior the Mo films, though there is a marked decrease in hardness and elastic modulus values. In particular, there is a sizable difference in maximum and minimum elastic modulus values; the elastic modulus decreased from ~460 to 260–280 GPa with increasing substrate temperature from 25–500 °C. The plasticity index and wear resistance index values show a dramatic change with substrate temperature and grain size. Additionally, the optical properties of the nanocrystalline Mo films evaluated by spectroscopic ellipsometry indicate a marked dependence on the growth temperature and grain size. This dependence on grain size variation was particularly notable for the refractive index where Mo films with lower grain size fell in a range between ~2.75–3.75 across the measured wavelength as opposed to the range of 1.5–2.5 for samples deposited at temperatures of 400–500 °C, where the grain size is relatively higher. The conductive atomic force microscopy (AFM) studies indicate a direct correlation with grain size variation and grain versus grain boundary conduction; the trend noted was improved electrical conductivity of the Mo films in correlation with increasing grain size. The combined ellipsometry and conductive AFM studies allowed us to optimize the structure–property correlation in nanocrystalline Mo films for application in electronics and optoelectronics.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Influence of gadolinium doping on structural, optical, and electronic properties of polymeric graphitic carbon nitride

Polymeric graphitic carbon nitride (gCN) materials have received great attention in the fields of photo and electrocatalysis due to their distinct properties in metal-free systems with high physicochemical stability. Nevertheless, the activity of undoped gCN is limited due to its relatively low specific surface area, low conductivity, and poor dispersibility. Doping Gd atoms in a gCN matrix is an efficient strategy to fine-tune its catalytic activity and its electronic structure. Herein, the influence of various wt% of gadolinium (Gd) doped in melon-type carbon nitride was systematically investigated. Gadolinium-doped graphitic carbon nitride (GdgCN) was synthesized by adding gadolinium nitrate to dicyandiamide during polymerization. The X-ray diffraction (XRD) and transmission electron microscopy (TEM) results revealed that the crystallinity and the morphological properties are influenced by the % of Gd doping. Furthermore, X-ray photoelectron spectroscopy (XPS) studies revealed that the gadolinium ions bonded with nitrogen atoms. Complementary density functional theory (DFT) calculations illustrate possible bonding configurations of Gd ions both in bulk material and on ultrathin melon layers and provide evidence for the corresponding bandgap modifications induced by gadolinium doping.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Optical, structural and aging properties of Al/Sc-based multilayers for the extreme ultraviolet

This manuscript presents the structural characterization of Al/Sc-based periodic multilayer coatings for the extreme ultraviolet (EUV) spectral range. Based on transmission electron microscopy and electron diffraction as well as grazing-incidence and large-angle x-ray diffraction, a model for the layer structure and the interfacial effects of Al/Sc coatings is built. The onset of crystallization in nanoscale Al and Sc layers as a function of thickness is also revealed in these characterizations. The Al/Sc layer model is validated and further refined by fitting in-band and out-of-band EUV reflectance measurements across 5 orders of magnitude in an extended wavelength range from 17 to 80 nm. Here, the same type of EUV reflectance measurements is used to test the Al/Sc aging properties and to demonstrate the spectral response of optimized two- and tri-material multilayers including Al/Sc, Al/Sc/SiC and Mo/Al/Sc.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Cooling Mixed A-Site Halide Perovskites: Impact of Temperature on Optical and Structural Properties

The widespread utilization of perovskite-based photovoltaics requires probing both the structural and optical properties under extreme operating conditions to gain a holistic understanding of the material behavior under stressors. Here, in this study, we investigate the temperature-dependent behavior of mixed A-site cation lead triiodide perovskite thin films (85% methylammonium and 15% formamidinium) in the range from 300 to 20 K. Through a combination of optical and structural techniques, we find that the tetragonal-to-orthorhombic phase transition occurs at similar to 110 K for this perovskite composition, as indicated by the change in the diffraction pattern. With decreasing temperature, the quantum yield increases with a concurrent elongation of the carrier lifetimes, indicating suppression of nonradiative recombination pathways. Interestingly, in contrast to single A-site cation perovskites, an additional optical transition appears in the absorption spectrum when the phase transition is approached, which is also reflected in the emission spectrum. We propose that the splitting of the optical absorption and emission is due to local segregation of the mixed cation perovskite during the phase transition.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Impact of Transition Metal Doping on the Structural and Optical Properties of Halide Perovskites

Metal ion doping into halide perovskite materials is a promising approach to enhance long-term film stability and improve solar cell performance. Moreover, the idea of doping metals into halide perovskites is also driven by applications in heterogeneous catalysis. Here, we investigate the incorporation of the transition metals Pt and Pd into mixed-halide perovskite materials. We find that Pt aggregates in large clusters in iodine- and bromine-rich perovskite film compositions, whereas Pd incorporation depends on the underlying bromine to iodine ratio. Furthermore, by using optical and structural characterization methods, we observe that phase segregation in the perovskite layer is suppressed upon doping of either of these metals into the material. This approach further shows the potential to obtain catalytically active halide perovskite films in which the perovskite can serve as a host matrix.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

First-Principles Calculations of the Structural, Electronic, Optical, and Mechanical Properties of 21 Pyrophosphate Crystals

Pyrophosphate crystals have a wide array of applications in industrial and biomedical fields. However, fundamental understanding of their electronic structure, optical, and mechanical properties is still scattered and incomplete. In the present research, we report a comprehensive theoretical investigation of 21 pyrophosphates A 2 M (H 2 P 2 O 7 ) 2 •2H 2 O with either triclinic or orthorhombic crystal structure. The molecule H 2 P 2 O 7 is the dominant molecular unit, whereas A = (K, Rb, NH 4 , Tl), M = (Zn, Cu, Mg, Ni, Co, Mn), and H 2 O stand for the cation elements, transition metals, and the water molecules, respectively. The electronic structure, interatomic bonding, partial charge distribution, optical properties, and mechanical properties are investigated by first-principles calculations based on density functional theory (DFT). Most of these 21 crystals are theoretically investigated for the first time. The calculated results show a complex interplay between A, M, H 2 P 2 O 7 , and H 2 O, resulting in either metallic, half-metallic, or semi-conducting characteristics. The novel concept of total bond order density (TBOD) is used as a single quantum mechanical metric to characterize the internal cohesion of these crystals to correlate with the calculated properties, especially the mechanical properties. This work provides a large database for pyrophosphate crystals and a road map for potential applications of a wider variety of phosphates.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Twists and turns: stacking and structure-dependent optical response in MoS 2 nanoscrolls

Transition metal dichalcogenide (TMD) nanoscrolls (NSs), specifically MoS 2 NSs, present unique structural and optical properties, exhibiting prominent photoluminescence (PL) signals despite their multilayer nature. Here, this study investigates the structural and spectroscopic characteristics of MoS 2 NSs, correlating them to show the effects of reduced interlayer interactions on excitons of MoS 2 NSs. The reduction in interlayer interaction arises from two main factors: (1) symmetry-broken mixed stacking due to misalignment between layers and (2) a highly inhomogeneous strain profile generated by the Archimedean spiral geometry with positive eccentricity. Transmission electron microscopy, field emission scanning electron microscopy, atomic force microscopy, Raman spectroscopy, and second harmonic generation measurements confirm these findings. Low-temperature PL spectroscopy explores the impact of reduced interlayer interactions on exciton properties such as exciton–phonon coupling and oscillator strength. This study provides crucial insights into the structure, stacking and unique optical properties of TMD NSs, advancing the understanding of interlayer interactions and their impacts in complex quasi-one-dimensional nanostructures.

25 ENERGY STORAGE↗
DOE OSTI2022

Structural and optical properties of cubic GaN on U-grooved Si (100)

Cubic GaN epitaxy on large-area U-grooved silicon (100) dies is demonstrated by metalorganic chemical vapor deposition, and its structural and optical properties are reported. Scanning electron, atomic force, and transmission electron microscopy studies reveal that cubic GaN shows no discernible threading dislocations and a low stacking fault density of 3.27 ± 0.18 × 10 4 cm –1 . Temperature-dependent photoluminescence studies reveal as-grown cubic GaN band edge emission internal quantum efficiency as 25.6% ± 0.9%. Selective etching of the low-temperature AlN buffer layer, SiO 2 sidewalls, and hexagonal-phase GaN is demonstrated, which increases the cubic GaN band edge emission internal quantum efficiency to 31.6% ± 0.8%. This increase is attributed to the decrease in the radiative recombination lifetime via the removal of defective hexagonal-phase GaN. Altogether, cubic GaN on U-grooved silicon with high structural and optical quality is reported, promising its suitability for next-generation devices.

36 MATERIALS SCIENCE↗