Search NASA⌕ Search

SEARCH · Search NASA

Results for “optical switch”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

All-optical switching in optically induced nonlinear waveguide couplers

We experimentally demonstrate all-optical vortex switching in nonlinear coupled waveguide arrays optically induced in photorefractive media. Our technique is based on multiplexing of nondiffracting Bessel beams to induce various types of waveguide configurations. Using double- and quadruple-well potentials, we demonstrate precise control over the coupling strength between waveguides, the linear and nonlinear dynamics and symmetry-breaking bifurcations of guided light, and a power-controlled optical vortex switch.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Latching micro optical switch

An optical switch reliably maintains its on or off state even when subjected to environments where the switch is bumped or otherwise moved. In addition, the optical switch maintains its on or off state indefinitely without requiring external power. External power is used only to transition the switch from one state to the other. The optical switch is configured with a fixed optical fiber and a movable optical fiber. The movable optical fiber is guided by various actuators in conjunction with a latching mechanism that configure the switch in one position that corresponds to the on state and in another position that corresponds to the off state.

42 ENGINEERING↗

Deep Optical Switching on Subpicosecond Timescales in an Amorphous Ge Metamaterial

Active nanostructured optical components show promise as potential building blocks for novel light-based computing and data processing architectures. However, nanoscale all-optical switches that have low activation powers and high-contrast ultrafast switching have been elusive so far. Here, pump–probe measurements performed on amorphous-Ge-based micro-resonator metasurfaces that exhibit strong resonant modes in the mid-infrared are reported. Relative change is observed in transmittance of ΔT/T ≈ 1 with picosecond (down to τ ≈ 0.5 ps) free carrier relaxation rates, obtained with very low pump fluences of 50 μJ cm –2 . In this work, these observations are attributed to efficient free carrier promotion, affecting light transmittance via high quality-factor optical resonances, followed by an increased electron–phonon scattering of free carriers due to the amorphous crystal structure of Ge. Full-wave simulations based on a permittivity model that describes free-carrier damping through crystal structure disorder find excellent agreement with the experimental data. These findings offer an efficient and robust platform for all-optical switching at the nanoscale.

36 MATERIALS SCIENCE↗

In-situ weak-beam and polarization control of multidimensional laser sidebands for ultrafast optical switching

All-optical switching has myriad applications in optoelectronics, optical communications, and quantum information technology. To achieve ultrafast optical switching in a compact yet versatile setup, we demonstrate distinct sets of two-dimensional (2D) broadband up-converted multicolor arrays (BUMAs) in a thin type-I β-barium-borate crystal with two noncollinear near-IR femtosecond pulses at various phase-matching conditions. The unique interaction mechanism is revealed as quadratic spatial solitons (QSSs)-coupled cascaded four-wave mixing (CFWM), corroborated by numerical calculations of the governing phase-matching conditions. Broad and continuous spectral-spatial tunability of the 2D BUMAs are achieved by varying the time delay between the two incident pulses that undergo CFWM interaction, rooted in the chirped nature of the weak white light and the QSSs generation of the intense fundamental beam. The control of 2D BUMAs is accomplished via seeding a weak second-harmonic pulse in situ to suppress the 2D arrays with polarization dependence on the femtosecond timescale that matches the control pulse duration of ∼35 fs. A potential application is proposed on femtosecond all-optical switching in an integrated wavelength-time division multiplexing device.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Configuration of an optical switch fabric using machine learning

An optical switch fabric comprises two or more optical switch elements. The optical switch elements are configured in a topology. A switch control has a plurality of bias control signals. The switch control can address one or more of the optical switch elements and can apply one of the bias control signals to bias of the addressed optical switch element to establish a switch setting. The topology and switch settings determine how each of one of the inputs is connected to each of one of the outputs of the optical switch fabric. The switch settings are determined by a machine learning process which includes a model creation. The model can be made to adapt dynamically during optical switch fabric operation.

Dupuis, Nicolas↗

Supramolecular Metal Halide Complexes for High-Temperature Nonlinear Optical Switches

Nonlinear optical (NLO) switching materials, which exhibit reversible intensity modulation in response to thermal stimuli, have found extensive applications across diverse fields, including sensing, photoelectronics, and photonic applications. While significant progress has been made in solid-state NLO switching materials, these materials typically showcase their highest NLO performance near room temperature. However, this performance drastically deteriorates upon heating, primarily due to the phase transition undergone by the materials from non-centrosymmetric to centrosymmetric phase. Here, we introduce a new class of NLO switching materials, solid-state supramolecular compounds 18-Crown-6 ether@Cu 2 Cl 4 ·4H 2 O (1·4H 2 O), exhibiting reversible and stable NLO switching when subjected to near-infrared (NIR) photoexcitation and/or thermal stimuli. The reversible crystal structure in response to external stimuli is attributed to the presence of a weakly coordinated bridging water molecule, facilitated by hydrogen bonding/chelation interactions between the metal halide and crown-ether supramolecules. We observed an exceptionally high second-harmonic generation (SHG) signal under continuous photoexcitation, even at temperatures exceeding 110°C. In addition, the bridging water molecules within the complex can be released and recaptured in a fully reversible manner, all without requiring excessive energy input. This feature allows for precise control of SHG signal activation and deactivation through structural transformations, resulting in a high-contrast off/on ratio, reaching values in the million-fold range.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Light-Induced Macroscopic Peeling of Single Crystal Driven by Photoisomeric Nano-Optical Switching

Single-crystal optical actuators are emerging as a prospective material form for nano-optical mechanical switching, sensing, or transduction device applications in nano-technology and quantum technology. Crystal-lattice strain effects lie at the molecular origins of their macroscopic optical behavior, and linkage photoisomerization is an attractive source of optical actuation if only suitably functioning materials of this ilk could be found. In this work, we discover η 1 -SO 2 to η 1 -OSO single-crystal linkage photoisomerization in [Ru(NH 3 ) 4 (SO 2 )(3-phenylpyridine)]Cl 2 ·H 2 O, which behaves macroscopically as a single-crystal optical actuator, whereby the crystal peels in response to light-induction at 100 K. It thermally recovers, whereupon the crystal exhibits remarkable restorative properties. We apply photocrystallography alongside concerted optical microscopy and optical absorption spectroscopy to reveal how the molecular origins of photoisomerization induce crystal-lattice strain that engenders this macroscopic crystal peeling effect. Finally, linking structure and function across molecular and macroscopic length scales showcases a means by which single-crystal optically actuating materials could be systematically designed.

36 MATERIALS SCIENCE↗

All-optical switching of magnetoresistive devices using telecom-band femtosecond laser

Ultrafast all-optical switching of the magnetization of various magnetic systems is an intriguing phenomenon that can have tremendous impact on information storage and processing. Here, we demonstrate all-optical switching of GdFeCo alloy films using a telecom-band femtosecond fiber laser. We further fabricate Hall cross devices and electrically readout all-optical switching by measuring anomalous Hall voltage changes. The use of a telecom laser and the demonstrated all-optical switching of magnetoresistive devices represent the first step toward integration of opto-magnetic devices with mainstream photonic devices to enable novel optical and spintronic functionalities.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optical switching and photoluminescence in erbium-implanted vanadium dioxide thin films

Vanadium dioxide (VO{sub 2}) is under intensive consideration for optical switching due to its reversible phase transition, which features a drastic and rapid shift in infrared reflectivity. Classified as an insulator–to–metal transition, the phase transition in VO{sub 2} can be induced thermally, electrically, and optically. When induced optically, the transition can occur on sub-picosecond time scales. It is interesting to dope VO{sub 2} with erbium ions (Er{sup 3+}) and observe their combined properties. The first excited-state luminescence of Er{sup 3+} lies within the wavelength window of minimal transmission-loss in silicon and has been widely utilized for signal amplification and generation in silicon photonics. The incorporation of Er{sup 3+} into VO{sub 2} could therefore result in a novel photonic material capable of simultaneous optical switching and amplification. In this work, we investigate the optical switching and photoluminescence in Er-implanted VO{sub 2} thin films. Thermally driven optical switching is demonstrated in the Er-implanted VO{sub 2} by infrared reflectometry. Photoluminescence is observed in the thin films annealed at ∼800 °C or above. In addition, Raman spectroscopy and a statistical analysis of switching hysteresis are carried out to assess the effects of the ion implantation on the VO{sub 2} thin films. We conclude that Er-implanted VO{sub 2} can function as an optical switch and amplifier, but with reduced switching quality compared to pure VO{sub 2}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Engineering the temporal dynamics of all-optical switching with fast and slow materials

Abstract All-optical switches control the amplitude, phase, and polarization of light using optical control pulses. They can operate at ultrafast timescales – essential for technology-driven applications like optical computing, and fundamental studies like time-reflection. Conventional all-optical switches have a fixed switching time, but this work demonstrates that the response-time can be controlled by selectively controlling the light-matter-interaction in so-called fast and slow materials. The bi-material switch has a nanosecond response when the probe interacts strongly with titanium nitride near its epsilon-near-zero (ENZ) wavelength. The response-time speeds up over two orders of magnitude with increasing probe-wavelength, as light’s interaction with the faster Aluminum-doped zinc oxide (AZO) increases, eventually reaching the picosecond-scale near AZO’s ENZ-regime. This scheme provides several additional degrees of freedom for switching time control, such as probe-polarization and incident angle, and the pump-wavelength. This approach could lead to new functionalities within key applications in multiband transmission, optical computing, and nonlinear optics.

42 ENGINEERING↗

Controllable optical switch using a Bose-Einstein condensate in an optical cavity

The optical bistability of an ultracold atomic ensemble located in a small-volume ultrahigh-finesse optical cavity is investigated. We find that a transverse pumping field can be used to control the bistable behavior of the intracavity photons induced by the input pumping along the cavity axis. This phenomenon can be used as a controllable optical switch.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Plasmonic optical switches based on Mach-Zender interferometer

Electro-optical switches composed of two Mach-Zehnder interferometer waveguides filled with 4-dimethylamino-N-methyl-4-stilbazolium tosylate (DAST) have been proposed and investigated. The characteristics of the switch waveguide are analyzed. The finite-difference time domain simulation results reveal that the structure can operate as an optical switch by controlling the voltage V{sub 1} or V{sub 2} applied on the region filled with the DAST material with the {pi} phase shift voltage as V{sub {pi}} = 2.9 V. The structure has a small dimension of hundreds of nanometers.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

RKKY Exchange Bias Mediated Ultrafast All-Optical Switching of a Ferromagnet

The discovery of ultrafast helicity-independent all-optical switching (HI-AOS), as well as picosecond all-electrical switching of a ferrimagnet, has inspired the ultrafast spintronics community to explore ultrafast switching of a ferromagnet to achieve practical ultrafast storage and memory devices. Two explored mechanisms of HI-AOS of a ferromagnet in ferromagnet-ferrimagnet heterostructure are: a) exploiting the indirect exchange coupling with and b) injection of non-local spin current originated from a switching ferrimagnet. Here, in this manuscript, exchange mediated HI-AOS of a Ruderman–Kittel–Kasuya–Yosida (RKKY) exchange coupled “[Co/Pt]-multilayers/Pt spacer/CoGd” heterostructure is demonstrated. The authors have measured layer-resolved static magnetic properties, single-shot HI-AOS, and magnetization dynamics of the ferromagnetic Co/Pt multilayers (MLs), that are ferromagnetically or antiferromagnetically coupled with ferrimagnetic CoGd layers. Time-resolved magnetization dynamics reveal a 3.5 ps switching time of the Co/Pt MLs, which is the fastest switching of a ferromagnet reported to date. Employing an extended microscopic three-temperature model, the temporal dynamics of the exchange coupled ferromagnet–ferrimagnet heterostructure are simulated, qualitatively and quantitatively explaining the experimental switching phenomena. This work experimentally as well as theoretically establishes the mechanism of exchange mediated all-optical switching of ferromagnet-ferrimagnet heterostructures, which can be integrated with a magnetic tunnel junction for efficient reading after ultrafast energy-efficient switching.

36 MATERIALS SCIENCE↗

Micro electro mechanical system optical switching

The present disclosure includes apparatus, system, and method embodiments that provide micro electo mechanical system optical switching and methods of manufacturing switches. For example, one optical switch embodiment includes at least one micro electro mechanical system type pivot mirror structure disposed along a path of an optical signal, the structure having a mirror and an actuator, and the mirror having a pivot axis along a first edge and having a second edge rotatable with respect to the pivot axis, the mirror being capable of and arranged to be actuated to pivot betweeen a position parallel to a plane of an optical signal and a position substantially normal to the plane of the optical signal.

42 ENGINEERING↗

Four Channel Time Multiplexed Photonic Doppler Velocimetry using an Optical Switch

Photonic Doppler Velocimetry (PDV) is a diagnostic commonly used in shock physics and dynamic compression experiments to reliably get velocity information from experiments. In PDV systems, a common method of reducing experimental cost is to use time and frequency multiplexing to increase the number of PDV probes. With time multiplexing, interference between probes is a frequent problem. In this report, we look at using a high-speed optical switch to reduce this interference, including measuring the amount of interference generated to determine if it has the potential to affect experiments and integrating a time multiplexing system into an experiment. We find that, when applied to PDV systems, there is approximately (-23.4 ± 0.9) dB of interference measured in the short time Fourier transform between switch inputs. When an optical switch based time multiplexing system was integrated into a dynamic compression experiment, the system was able to successfully combine the signals from four different PDV probes onto a single optical cable without unacceptable levels of interference in the spectrogram. An optical switch based time multiplexing system appears to be a promising method for reducing the cost of fielding larger numbers of PDV probes in an experiment.

47 OTHER INSTRUMENTATION↗

Electro-Optical Switching of Gradient 2D-PDLC Films

A tunable electro-optical switching is reported for single-layered polymer-dispersed liquid crystal (PDLC) films, controlled by the film thickness. Thin planar film of two-dimensional layer of thickness continuously varying from a few micrometers to several tens of micrometers is examined. The wedge-confined PDLC single layer contains E7 liquid-crystal microdroplets dispersed in a transparent polymer matrix of NOA65. The diameters of the droplets with a linear-gradient size distribution along the wedge slope reach several tens of micrometers, defined by the wedge geometry of the film. The electro-optical switching of the single-layered PDLC film is linked to its microstructure and droplet organization.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Design and modelling of the photonic crystal fano structure for all optical switching applications

In this paper, the optical Fano switch based on the 2D slab photonic crystal is analyzed. Switching characteristics are improved by manipulating the Q factors of cavities. Modified device with enhanced Fano resonance has lower energy consumption than other previous optical switches. Results show that, the switching contrast is enhanced while the quality factor has remained in its highest value. Therefore, the typical important trade off between switching contrast and quality factor has vanished in the modified structure. The switching contrast is improved from 7 to 34 db in constant Δλ{sub peak−peak} of 0.3 nm in the modified structure which leads to decreasing the energy consumption of the device. In the previous devices, the maximum reported contrast is about 20 db for Δλ{sub peak−peak} of 0.6 nm. A coupled mode theory for analyzing the structure is developed. The results of finite difference time domain numerical simulation are in good agreement with the theoretical coupled mode theory. Results show that the switching contrast of the modified Fano switch is enhanced two times, consequently the loss is suppressed and the bandwidth is improved.

36 MATERIALS SCIENCE↗