Search NASA⌕ Search

SEARCH · Search NASA

Results for “ordered search”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Translation-Invariant Quantum Algorithms for Ordered Search are Optimal

Ordered search is the task of finding an item in an ordered list using comparison queries. The best exact classical algorithm for this fundamental problem uses [log 2 n] queries for a list of length n. Quantum computers can achieve a constant-factor speedup, but the best possible coefficient of log 2 n for exact quantum algorithms is only known to lie between (ln2)/π ≈ 0.221 and 4/log 2 605 ≈ 0.4333. We consider a special class of translation-invariant algorithms with no workspace, introduced by Farhi, Goldstone, Gutmann, and Sipser, that has been used to find the best known upper bounds. First, we show that any bounded-error, k-query quantum algorithm for ordered search can be implemented by a k-query algorithm in this special class. Second, we use linear programming to show that the best exact 5-query quantum algorithm can search a list of length 7265, giving an ordered search algorithm that asymptotically uses 5 log 7265 n ≈ 0.390 log 2 n quantum queries.

Translation-invariant quantum algorithms↗

Search for octupolar order in NpO 2 by neutron powder diffraction

The magnetic structure of neptunium dioxide (NpO 2 ) remains a mystery despite decades of research. We revisited the search for magnetic ordering in NpO 2 by performing a powder neutron diffraction experiment at low temperatures and relatively large values of Q. Diffraction data were collected for 300 MK, 15 K, and 35 K to understand the phase transition near 25 K. However, no significant changes in the neutron diffraction pattern were identified. Using the octupolar magnetic form factor j 6 , the maximum theoretical expected value of the magnetic moment (3.27 μ B ), the calculated magnetic Bragg peak intensities would not be observable in neutron powder diffraction data. This value is much larger than the previously estimated magnetic moment of ~0.1 μ B . In conclusion, supported by experimental results, these calculations suggest that unpolarized neutron powder diffraction is unsuitable for measuring octupolar ordering in NpO 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Review of honeycomb-based Kitaev materials with zigzag magnetic ordering

The search for a Kitaev quantum spin liquid in crystalline magnetic materials has fueled intense interest in the two-dimensional honeycomb systems. Many promising candidate Kitaev systems are characterized by a long-range-ordered magnetic structure with an antiferromagnetic zigzag-type order, where the static moments form alternating ferromagnetic chains. Recent experiments on high-quality single crystals uncovered the existence of intriguing multi-k magnetic structures, which evolved from zigzag structures. Those discoveries have sparked new theoretical developments and amplified interest in these materials. We present an overview of the honeycomb materials known to display this type of magnetic structure and provide detailed crystallographic information for the possible single- and multi-k variants.

36 MATERIALS SCIENCE↗

Search for Q ~0 Order near a Forbidden Bragg Position in Bi 2.1 Sr 1.9 CaCu 2 O 8+x with Resonant Soft X-ray Scattering

Identifying what broken symmetries are present in the cuprates has become a major area of research. Many authors have reported evidence for so-called “Q ~ 0” order that involves broken inversion, mirror, chiral, or time-reversal symmetry that is uniform in space. Not all these observations are well understood and new experimental probes are needed. Here we use resonant soft x-ray scattering (RSXS) to search for Q ~ 0 order in Bi 2.1 Sr 1.9 CaCu 2 O 8+x (Bi-2212) by measuring the region of a forbidden Bragg peak, (0,0,3), which is normally extinguished by symmetry but may become allowed on resonance if valence band order is present. Using circularly polarized light, we found that this reflection becomes allowed on the CuL 3 resonance for temperatures T c < T < T*, though remains absent in linear polarization and at other temperatures. This observation suggests the existence of spatially uniform valence band order near the pseudogap temperature. In addition, we observed periodic oscillations in the specular reflectivity from the sample surface that resemble thin film interference fringes, though no known film is present. These fringes are highly resonant, appear in all polarizations, and exhibit a period that depends on the location where the beam strikes the sample surface. We speculate that these fringes arise from interaction between some intrinsic valence band instability and extrinsic structural surface morphologies of the material. Our study supports the existence of some kind of Q ~ 0 broken symmetry state in Bi-2212 at intermediate temperatures. Further studies using a microfocused beam, which could disentangle microscopic effects from macroscopic heterogeneities, are needed to ascertain the universality of the effect.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Integration of the Kromek D3S Detector and Spot Robot For Secondary Inspections

Inspecting vehicles and containers for the presence of nuclear material is a challenging task for border control and security. When performed manually by inspectors, this task also has an associated risk of exposing the inspectors to unknown radiation. With the advent of agile, easy-to-program, quadruped robots like the Boston Dynamics Spot, automation of secondary inspection can improve the efficiency of the inspection process and alleviates the radiation risks to inspectors. In this project, Brookhaven National Laboratory and the University of Massachussetts at Lowell explored how to automate a simple secondary inspection mission. The Spot robot comes with its own software development kit (SDK) that allows clients/users to write custom code in the Python programming language to control the robot. Spot also has a payload computer called Spot-CORE, which runs the Ubuntu Linux operating system and allows users to integrate external sensors, such as a radiation detector, with Spot. In this study, the Kromek D3S detector has been integrated with Spot via the Spot-CORE, allowing Spot to capture gamma spectra and neutron counts for a specified acquisition period. Two custom routines, search and confirmation, have been developed and executed in this specified order. The search routine directs Spot to go around the nearest obstacle, e.g., vehicle and container, in a preset distance and step to collect gamma and neutron gross counts with the D3S detector. The radiation data and the robot location corresponding to each step are stored and fed to the confirmation routine at the end of the search. The confirmation routine then navigates Spot to the locations of the highest gamma or neutron counts to perform a long, e.g., one minute, measurement, and gives the operators the signature gamma spectra and neutron counts at the hotspots. This paper presents a detailed description of this automated system along with results of the preliminary tests in identifying the location and signature of a 137Cs radiation source in a vehicle.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

Gamma-Ray Emission from Galaxies Hosting Molecular Outflows

Many star-forming galaxies and those hosting active galactic nuclei show evidence of massive outflows of material in a variety of phases including ionized, neutral atomic, and molecular. Molecular outflows in particular have been the focus of recent interest as they may be responsible for removing gas from the galaxy, thereby suppressing star formation. As material is ejected from the cores of galaxies, interactions of the outflowing material with the interstellar medium can accelerate cosmic rays and produce high-energy gamma rays. In this work, we search for gamma-ray emission from a sample of local galaxies known to host molecular outflows using data collected by the Fermi Large Area Telescope. We employ a stacking technique in order to search for and characterize the average gamma-ray emission properties of the sample. Gamma-ray emission is detected from the galaxies in our sample at the 4.4σ level with a power-law photon index of Γ ≈ 2 in the 1–800 GeV energy range. The emission is found to correlate with tracers of star formation activity, namely the 8–1000 μm infrared luminosity. We also find that the observed signal can be predominantly attributed to H II galaxies hosting energy-driven outflows. While we do not find evidence suggesting that the outflows are accelerating charged particles directly, galaxies with molecular outflows may produce more gamma rays than galaxies without outflows. In particular, the set consisting of gamma-ray-detected galaxies with molecular outflows are nearly perfect calorimeters and may be future targets for searches of high-energy neutrinos.

79 ASTRONOMY AND ASTROPHYSICS↗

Application of Superconducting Cavities as Ultra-Sensitive RF Photon Detectors

Superconducting radio frequency (SRF) cavities are the world’s most efficient engineered oscillators, and they have long been employed for extremely high efficiency transfer of energy to beams of charged particles. Decades of R&D for particle accelerators have led to modern treatments for SRF cavities that achieve higher performance than was previously possible. Advanced SRF cavities using particle accelerator technology are now being used to search for new physics, including dark matter and gravitational waves. The extremely high Q makes it possible to search for very small signals from photons in the radio frequency range, and the extremely high electric fields makes it possible to perform experiments that involve pumping one mode of a cavity in order to search for power transfer mediated by new physics. This talk will present novel experiments that employ SRF cavities, including searches for axions and dark photons dark matter, light-shining-through-walls, and high frequency gravitational waves. Results to be presented include searches with world record sensitivity.

43 PARTICLE ACCELERATORS↗

Geometry-independent microstructure optimization for electron beam powder bed fusion additive manufacturing

The ability to manipulate the formation of microstructure is one of the potential advantages of additive manufacturing. Yet, the additive manufacturing process is riddled with complex interactions between processing parameters, geometry, and spot melting sequence which makes the task of controlling microstructure challenging. This paper proposes a method to solve the microstructure texture optimization problem by leveraging established optimization techniques and increasingly fast and accurate analytical heat transfer models. Respectively, we apply two different optimization algorithms, genetic algorithm and concurrent greedy line search, in order to induce arbitrarily shaped microstructure regions and we use a heat transfer model to evaluate the fitness of solutions in an iterative approach that is far more efficient than pure trial and error. The objective of the optimization algorithm is to control local thermal conditions – hence microstructure formation – during the melting process by manipulating the order and the dwell time of all the points of the infill pattern sequence. We then analyze the optimized sequence to determine important path characteristics that affect the microstructure formation. Through examples, we show that relative order and frequency, as measured by weighted average and variance of spot order, are important factors that influence the final characteristics.

36 MATERIALS SCIENCE↗

A search for the lenses in the Herschel Bright Sources (HerBS) sample

ABSTRACT Verifying that sub-mm galaxies are gravitationally lensed requires time-expensive observations with oversubscribed high-resolution observatories. Here, we aim to strengthen the evidence of gravitational lensing within the Herschel Bright Sources (HerBS) by cross-comparing their positions to optical (SDSS) and near-infrared (VIKING) surveys, in order to search for the foreground lensing galaxy candidates. Resolved observations of the brightest HerBS sources have already shown that most are lensed, and a galaxy evolution model predicts that ∼76 per cent of the total HerBS sources are lensed, although with the SDSS survey we are only able to identify the likely foreground lenses for 25 per cent of the sources. With the near-infrared VIKING survey, however, we are able to identify the likely foreground lenses for 57 per cent of the sources, and we estimate that 82 per cent of the HerBS sources have lenses on the VIKING images even if we cannot identify the lens in every case. We find that the angular offsets between lens and Herschel source are larger than that expected if the lensing is done by individual galaxies. We also find that the fraction of HerBS sources that are lensed falls with decreasing 500-micron flux density, which is expected from the galaxy evolution model. Finally, we apply our statistical VIKING cross-identification to the entire Herschel-ATLAS catalogue, where we also find that the number of lensed sources falls with decreasing 500-micron flux density.

Bakx, Tom J. L. C.↗

Resolution of zigzag magnetic correlations in Na-deficient Na x IrO 3 without long-range ordering

The materials search for Kitaev quantum spin liquids led to the discovery of many honeycomb lattice materials. Much attention has been paid to materials without magnetic order down to the lowest temperatures. The newly synthesized Na-deficient Na x IrO 3 has been found to bear no sign of long-range magnetic order above 1 K from physical property measurements. In this paper, we report momentum-and energy-resolved excitation spectra in Na-deficient Na x IrO 3 measured using a resonant inelastic x-ray scattering spectrometer. Orbital excitation spectra show that the octahedral and trigonal crystal field splittings are larger in Na x IrO 3 than in Na 2 IrO 3 . On the other hand, the low-energy spectrum at low temperature shows a wave-vector dispersion and a spectral weight distribution that are similar to those of Na 2 IrO 3 , revealing that the two-dimensional zigzag magnetic correlations in Na x IrO 3 are similar to those in Na 2 IrO 3 in terms of the ordered magnetic moment direction and three dynamically fluctuating zigzag orders. The azimuth angle dependence of the low-energy spectrum corroborates these results. The two-dimensional zigzag magnetic correlations rapidly weaken until 50 K. At high temperatures, the spectral weight distribution of the low-energy excitation resembles that of the pure Kitaev model, indicating that the Kitaev interaction dominates the dynamic magnetic response at high temperature. Here we suggest that the larger crystal field and distortion and the weakened longer-range Heisenberg exchange interactions due to the Na deficiency in Na x IrO 3 contribute to bring Na x IrO 3 away from the zigzag long-range magnetic order phase.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Quasar clustering at redshift 6

Large-scale surveys over the last years have revealed about 300 quasi-stellar objects (QSOs) at redshifts above 6. Follow-up observations have identified surprising properties, such as the very high black hole (BH) masses, spatial correlations with surrounding cold gas of the host galaxy, and high CIV-MgII Velocity shifts. In particular, the discovery of luminous high-redshift quasars suggests that at least some BHs likely have high masses at birth and grow efficiently. Our aim is to quantify quasar pairs at high redshift for a large sample of objects. This provides a new key constraint on a combination of parameters related to the origin and assembly for the most massive BHs: formation efficiency and clustering, growth efficiency, and the relative contribution of BH mergers. We observed 116 spectroscopically confirmed QSOs around redshift 6 with the simultaneous seven-channel imager Gamma-ray Burst Optical/Near-infrared Detector in order to search for companions. Applying colour-colour cuts identical to those which led to the spectroscopically confirmed QSOs, we performed Le PHARE fits to the 26 best QSO pair candidates, and obtained spectroscopic observations for 11 of them. We do not find any QSO pair with a companion brighter than M 1450 (AB) < –26 mag within our 0.1–3.3 h –1 cMpc search radius, in contrast to the serendipitous findings in the redshift range 4–5. However, a small fraction of such pairs at this luminosity and redshift is consistent with indications from present-day cosmological-scale galaxy evolution models. In turn, the incidence of L- and T-type brown dwarfs, which occupy a similar colour space to z ~ 6 QSOs, is higher than expected, by a factor of 5 and 20, respectively.

79 ASTRONOMY AND ASTROPHYSICS↗

Evaporation barrier for dark matter in celestial bodies

The minimum testable dark matter (DM) mass for almost all DM signatures in celestial bodies is determined by the rate at which DM evaporates. DM evaporation has previously been calculated assuming a competition between the gravitational potential of the object, and thermal kicks from the celestial-body matter. We point out a new effect, where mediators with a range larger than the interparticle spacing induce a force proportional to the density gradient of celestial objects, forming an evaporation barrier for the DM. This effect can be so significant that evaporation does not occur even for sub-MeV DM, in stark contrast to previous calculations. This opens up a wide range of new light DM searches, many orders of magnitude in DM mass below the sensitivity of direct detection.

79 ASTRONOMY AND ASTROPHYSICS↗

First-principles calculation of ballistic current from electron-hole interaction

The bulk photovoltaic effect (BPVE) has attracted increasing interest due to its potential to overcome the efficiency limit of traditional photovoltaics, and much effort has been devoted to understanding its underlying physics. However, previous work has shown that theoretical models of the shift current and the phonon-assisted ballistic current in real materials do not fully account for the experimental BPVE photocurrent, so other mechanisms should be investigated in order to obtain a complete picture of BPVE. As such, in this paper, we demonstrate two approaches that enable the ab initio calculation of the ballistic current originating from the electron-hole interaction in semiconductors. Using BaTiO 3 and monolayer MoS 2 as two examples, we show clearly that for them the asymmetric scattering from an electron-hole interaction is less appreciable than that from an electron-phonon interaction, indicating more scattering processes need to be included to further improve the BPVE theory. Moreover, we provide a first-principles approach for material prediction and design in order to search for materials with a larger ballistic current due to electron-hole interactions.

14 SOLAR ENERGY↗

Building the case for forward muon detection at a muon collider

We survey the opportunities offered by the detection of the forward muons that accompany the creation of neutral effective vector bosons at a muon collider, in different kinematic regimes. Vectors with relatively low energy produce the Higgs boson and the extended muon angular coverage enables studies of the Higgs properties, such as the measurement of the inclusive production cross section and the branching ratio to invisible final states. New heavy particles could be produced by vectors of higher energy, through Higgs portal interactions. If the new particles are invisible, the detection of the forward muons is essential in order to search for this scenario. The angular correlations of the forward muons are sensitive to the quantum interference between the vector-boson helicity amplitudes and can be exploited for the characterization of vector-boson scattering and fusion processes. This is illustrated by analyzing the C P properties of the Higgs coupling to the Z boson. Our findings provide a physics case and a set of benchmarks for the design of a dedicated forward muon detector. Published by the American Physical Society 2025

Ruhdorfer, Maximilian (ORCID:0000000288973223)↗

Advanced Ab Initio Methods for Nuclear Structure (Final Report)

Over the past decade, there has been enormous progress in the description of nuclear structure from first principles, using interactions from Chiral Effective Field Theory that are rooted in Quantum Chromodynamics, the fundamental theory of strong interactions, and many-body methods that solve the Schrödinger equation with systematically improvable approximations. Amongst those are the family of In-Medium Similarity Renormalization Group (IMSRG) framework developed by the PI and his co-workers. While these methods scale polynomially in the size N of the single-particle basis, computational efforts still grows dramatically as we increase the degrees of freedom for the nucleons by relaxing symmetries or introducing continuum couplings (see below), or as we push to improved truncations to provide precise inputs for experimental efforts, in particular in fundamental symmetry searches. In order to address this growing computational cost, one focus area of this award was the exploration of compression and factorization methods. The key to success or failure is the presence of low-rank structures within the matrix elements of NN and 3N interactions or the IMSRG evolution operator, and a means to reformulate the method that will let us exploit them.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Calibration and Data Analysis of a Frequency Selectable Laser Source for CMB Detector Characterization

Cosmic Microwave Background (CMB) experiments study faint radiation left over from the early universe. The CMB was created when the universe became cool enough for light to travel freely through space, and today it gives scientists one of the earliest images of the universe. One important goal of modern CMB experiments is to measure this radiation with higher precision in order to search for evidence that supports the theory of cosmic inflation. To do this, scientists use extremely sensitive detectors that must be calibrated accurately. The Frequency Selectable Laser Source, or FLS, is a new calibration tool that can send selected frequencies to detectors and help measure their response. During my internship, I worked on the FLS after it returned to Fermilab from Chile, where it had been used to characterize detectors at the Simons Observatory. The system came back in parts, so the first part of my project was helping rebuild the optical and mechanical setup. After the system was rebuilt, we performed alignments to maximize the receiver photocurrent. We then collected calibration measurements over different frequency ranges, including 543 GHz to 568 GHz, 740 GHz to 766 GHz, and 60 GHz to 500 GHz. These measurements were used to check waterline calibration and reflectivity features and compare new data with previous data. Another major part of my project was learning Python so I could understand previous analysis code, modify it for new files, and write my own code to compare the mean response between datasets. The results showed that the new data was close to previous measurements and that waterline features near 556 GHz and 752 GHz were found within less than 1.5 GHz of the expected values. I also completed the reflectivity analysis for five prisms in two polarization orientations. In the original orientation, the results were consistent between the five prisms and close to values measured on a different system at the University of Chicago. I then collected a second set of measurements on my own with the polarization of the laser rotated by 90 degrees and compared them with the original data using the same Python workflow. The measured reflectivity increased for all five prisms in the new orientation, showing that the prism reflectivity depends on polarization. Future work will focus on using the FLS to characterize real CMB detectors.

Pumarino, Rafael [Unlisted]↗

The High-energy Radiation Environment around a 10 Gyr M Dwarf: Habitable at Last?

Recent work has demonstrated that high levels of X-ray and UV activity on young M dwarfs may drive rapid atmospheric escape on temperate, terrestrial planets orbiting within the habitable zone. However, secondary atmospheres on planets orbiting older, less active M dwarfs may be stable and present more promising candidates for biomarker searches. In order to evaluate the potential habitability of Earth-like planets around old, inactive M dwarfs, we present new Hubble Space Telescope and Chandra X-ray Observatory observations of Barnard’s Star (GJ 699), a 10 Gyr old M3.5 dwarf, acquired as part of the Mega-MUSCLES program. Despite the old age and long rotation period of Barnard’s Star, we observe two FUV (δ 130 ≈ 5000 s; E 130 ≈ 10 29.5 erg each) and one X-ray (E X ≈ 10 29.2 erg) flares, and we estimate a high-energy flare duty cycle (defined here as the fraction of the time the star is in a flare state) of ~25%. A publicly available 5 Å to 10 μm spectral energy distribution of GJ 699 is created and used to evaluate the atmospheric stability of a hypothetical, unmagnetized terrestrial planet in the habitable zone (r HZ ~ 0.1 au). Both thermal and nonthermal escape modeling indicate (1) the quiescent stellar XUV flux does not lead to strong atmospheric escape: atmospheric heating rates are comparable to periods of high solar activity on modern Earth, and (2) the flare environment could drive the atmosphere into a hydrodynamic loss regime at the observed flare duty cycle: sustained exposure to the flare environment of GJ 699 results in the loss of ≈87 Earth atmospheres Gyr -1 through thermal processes and ≈3 Earth atmospheres Gyr -1 through ion loss processes. These results suggest that if rocky planet atmospheres can survive the initial ~5 Gyr of high stellar activity, or if a second-generation atmosphere can be formed or acquired, the flare duty cycle may be the controlling stellar parameter for the stability of Earth-like atmospheres around old M stars.

79 ASTRONOMY AND ASTROPHYSICS↗