Search NASA⌕ Search

SEARCH · Search NASA

Results for “organic materials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Organic Light-Emitting Diodes (OLEDs) and Optically-Detected Magnetic Resonance (ODMR) studies on organic materials

Organic semiconductors have evolved rapidly over the last decades and currently are considered as the next-generation technology for many applications, such as organic light-emitting diodes (OLEDs) in flat-panel displays (FPDs) and solid state lighting (SSL), and organic solar cells (OSCs) in clean renewable energy. This dissertation focuses mainly on OLEDs. Although the commercialization of the OLED technology in FPDs is growing and appears to be just around the corner for SSL, there are still several key issues that need to be addressed: (1) the cost of OLEDs is very high, largely due to the costly current manufacturing process; (2) the efficiency of OLEDs needs to be improved. This is vital to the success of OLEDs in the FPD and SSL industries; (3) the lifetime of OLEDs, especially blue OLEDs, is the biggest technical challenge. All these issues raise the demand for new organic materials, new device structures, and continued lower-cost fabrication methods. In an attempt to address these issues, we used solution-processing methods to fabricate highly efficient small molecule OLEDs (SMOLEDs); this approach is costeffective in comparison to the more common thermal vacuum evaporation. We also successfully made efficient indium tin oxide (ITO)-free SMOLEDs to further improve the efficiency of the OLEDs. We employed the spin-dependent optically-detected magnetic resonance (ODMR) technique to study the luminescence quenching processes in OLEDs and organic materials in order to understand the intrinsic degradation mechanisms. We also fabricated polymer LEDs (PLEDs) based on a new electron-accepting blue-emitting polymer and studied the effect of molecular weight on the efficiency of PLEDs. All these studies helped us to better understand the underlying relationship between the organic semiconductor materials and the OLEDs’ performance, and will subsequently assist in further enhancing the efficiency of OLEDs. With strongly improved device performance (in addition to other OLEDs' attributes such as mechanical flexibility and potential low cost), the OLED technology is promising to successfully compete with current technologies, such as LCDs and inorganic LEDs.

36 MATERIALS SCIENCE↗

Embedded Error Bayesian Calibration of Thermal Decomposition of Organic Materials

Organic materials are an attractive choice for structural components due to their light weight and versatility. However, because they decompose at low temperatures relative to tradiational materials they pose a safety risk due to fire and loss of structural integrity. To quantify this risk, analysts use chemical kinetics models to describe the material pyrolysis and oxidation using thermogravimetric analysis. This process requires the calibration of many model parameters to closely match experimental data. Previous efforts in this field have largely been limited to finding a single best-fit set of parameters even though the experimental data may be very noisy. Furthermore the chemical kinetics models are often simplified representations of the true de- composition process. The simplification induces model-form errors that the fitting process cannot capture. In this work we propose a methodology for calibrating decomposition models to thermogravimetric analysis data that accounts for uncertainty in the model-form and experimental data simultaneously. The methodology is applied to the decomposition of a carbon fiber epoxy composite with a three-stage reaction network and Arrhenius kinetics. The results show a good overlap between the model predictions and thermogravimetric analysis data. Uncertainty bounds capture devia- tions of the model from the data. The calibrated parameter distributions are also presented. In conclusion, the distributions may be used in forward propagation of uncertainty in models that leverage this material.

36 MATERIALS SCIENCE↗

Biomimicry in metal-organic materials

Nature has evolved a great number of biological molecules which serve as excellent constructional or functional units for metal-organic materials (MOMs). Even though the study of biomimetic MOMs is still at its embryonic stage, considerable progress has been made in the past few years. In this critical review, we will highlight the recent advances in the design, development and application of biomimetic MOMs, and illustrate how the incorporation of biological components into MOMs could further enrich their structural and functional diversity. More importantly, this review will provide a systematic overview of different methods for rational design of MOMs with biomimetic features. Published by Elsevier B.V.

Zhang, MW↗

Organic light emitting device architecture for reducing the number of organic materials

An organic light emitting device is provided. The device includes an anode and a cathode. A first emissive layer is disposed between the anode and the cathode. The first emissive layer includes a first non-emitting organic material, which is an organometallic material present in the first emissive layer in a concentration of at least 50 wt %. The first emissive layer also includes a first emitting organic material. A second emissive layer is disposed between the first emissive layer and the cathode, preferably, in direct contact with the first emissive layer. The second emissive material includes a second non-emitting organic material and a second emitting organic material. The first and second non-emitting materials, and the first and second emitting materials, are all different materials. A first non-emissive layer is disposed between the first emissive layer and the anode, and in direct contact with the first emissive layer. The first non- emissive layer comprises the first non-emissive organic material.

47 OTHER INSTRUMENTATION↗

Hybrid exciton recombination dynamics in inorganic-organic materials

A systematic analysis of hybrid Frenkel–Wannier–Mott excitons recombination dynamics in nanocomposite material (organic–inorganic) is performed. A theoretical model based on the rate equation is used in the calculation of the light intensity and relative quantum efficiency. Numerical results have been presented for low and high concentration of quantum dots (Qds). Our results show that the light emission and relative quantum efficiency are significantly enhanced by incorporation of Qds in polymer matrix. Moreover our calculations were found to be in good agreement with the experimental data.

36 MATERIALS SCIENCE↗

Thermal Desorption/GCMS Analysis of Astrobiologically Relevant Organic Materials

Several macromolecular organic materials, both biologically-derived (type II kerogen and humic acid) and abiotic in origin (Murchison insoluble organic material, cyanide polymer, and Titan tholin) were subjected to thermal desorption using a Chromatoprobe attachment on a Varian Saturn 2000 GCMS system. Each sample was heated sequentially at 100, 200, and 300 C to release volatile components. The evolved compounds were then separated on a Supelco EC-1 dimethylsilica GC column and detected by the Saturn 2000 ion trap mass spectrometer. The various types of macromolecular organic material subjected to thermal desorption produced distinctly different GCMS chromatograms at each temperature, containing fractions of both low and high chromatographic mobility. The relative amounts of detectable volatiles released at each temperature also differed, with type II kerogen and cyanide polymer containing the highest percentage of low-temperature components. In all the samples, the highest yield of released compounds occurred at 300 C. Only cyanide polymer evolved a homologous hydrocarbon series, suggesting that it is the only material among those examined that contains a truly polymeric structure. Pyrolysis/gas chromatography/mass spectrometry has been used extensively for analysis of terrestrial organic macromolecular materials, and was also part of the instrument package on the Viking landers. Thorough analysis by pyrolysis usually employs temperatures of 500 C or higher, which for in situ analyses can be problematic given spacecraft power and materials constraints. This study demonstrates that heating of organic materials of astrobiological relevance to temperatures as low as 200-300 C for short periods releases volatile components that can be analyzed by gas chromatography and mass spectrometry. Even in the absence of full pyrolysis, useful chemical information on samples can be obtained, and materials from different biological and abiological sources can be distinguished. The research described in this paper was carried out at the Jet Propulsion Laboratory, California Institute of Technology, under a contract with the National Aeronautics and Space Administration.

McDonald, Gene D.↗

Impacts of oxo interactions within actinyl metal organic materials: highlight on thermal expansion behaviour

Physical properties of actinyl materials are influenced by the presence of oxo functional groups. Herein, we report large thermal expansion coefficients for a uranyl metal organic nanotube that switch from positive to negative upon dehydration. Finally, different behaviour is observed in the neptunyl system due to variations in the oxo interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermally Activated Delayed Fluorescence (TADF) Path toward Efficient Electroluminescence in Purely Organic Materials: Molecular Level Insight

Since the seminal work of Tang and Vanslyke in 1987 on small-molecule emitters and that of Friend and co-workers in 1990 on conjugated-polymer emitters, organic light-emitting diodes (OLEDs) have attracted much attention from academia as well as industry, as the OLED market is estimated to reach the $30B mark by the end of 2018. In these first-generation organic emitters, on the basis of simple spin statistics, electrical excitation resulted in the formation of ~25% singlet excitons and ~75% triplet excitons. Radiative decay of the singlet excitons to the singlet ground state leads to a prompt fluorescence emission, while the triplet excitons only lead to weak phosphorescence due to the very small spin-orbit couplings present in purely organic molecules. The consequence is a ca. 75% energy loss, which triggered wide-ranging efforts to try and harvest as many of the triplet excitons as possible. In 1998, Thompson, Forrest, and their co-workers reported second-generation OLED emitters based on coordination complexes with heavy transition metals (e.g., iridium or platinum). Here, the triplet excitons stimulate efficient and fast phosphorescence due to the strong spin-orbit couplings enabled by the heavy-metal atoms. Internal quantum efficiencies (IQE) up to 100% have been reported, which means that for every electron injected into the device, a photon is emitted. Here, while these second-generation emitters are those mainly exploited in current OLED applications, there is strong impetus from both cost and environmental standpoints to find new ways of exploiting purely organic emitters, which in addition can offer greater flexibility to fine tune the electronic and optical properties by exploiting the synthetic organic chemistry toolbox.

36 MATERIALS SCIENCE↗

Effects of microwave and ultrasound exposure to microsphere particles made out of different classes of inorganic and organic materials

In this study polymer, metal oxide and polymer-PZT composite microsphere materials were prepared by either hydrothermal or microwave assisted methods. Materials were subjected to microwave and ultrasound irradiation under specific conditions in order to understand their mechanical stability and morphological changes in dimensions. Scanning electron microscopy imaging was carried out before and after each irradiation and clear differences were observed depending on irradiation method and sample composition.

36 MATERIALS SCIENCE↗

Physical and Thermodynamic Properties of Secondary Organic Materials for Modeling (Final Technical Report)

Secondary organic material constitutes more than 50% of the submicron component of atmospheric aerosol particles. This organic material is produced by oxidation of biogenic and anthropogenic volatile organic compounds. The physicochemical properties of these aerosol particles and their variability with atmospheric conditions influence many climate-relevant endpoints, such as rates of chemical reactions, production of secondary organic material, number-diameter distributions, direct radiative forcing, and cloud condensation nuclei. The results of the project research highlight a nonlabile-to-labile transition for material representative of anthropogenic secondary organic particulate matter at a threshold humidity range. This behavior differs markedly from materials representing biogenic aerosol sources, which lack such a transition. More specifically, the mass lability of atmospheric organic particulate matter, meaning its tendency to evaporate, is an important property in the mechanisms governing the climate effects. This property is affected by both the volatility and the molecular diffusivity of the constituent organic species. Via a series of laboratory experiments, the project directly determined the mass labilities of films of secondary organic material representative of anthropogenic and biogenic organic particulate matter (PM). The evaporation rates for anthropogenic organic PM increased above a threshold relative humidity (RH) between 20% and 30%, indicating rapid partitioning above a transition RH. Below the threshold, the characteristic time for equilibration was estimated at up to 1 week for a typically sized particle. In contrast, for films representing biogenic PM, no RH threshold was observed, suggesting equilibrium partitioning is rapidly obtained for all RHs. The effective molecular diffusivity for the biogenic case was at least 1000 times greater than that of the anthropogenic case. The results allow for an improved representation of anthropogenic and biogenic secondary organic aerosol formation in climate models. The results of the project also provide new measurements on how organic aerosol particles take up water and serve as cloud condensation nuclei, thus explaining the observed complex thermodynamic behaviors using a simple thermodynamic model. The project results reconciled the discrepancy between sub-saturation hygroscopicity and super-saturation cloud condensation nuclei activity for organic aerosol particles. The key to the explanation is the phase separation between hydrophobic and hydrophilic organics and the induced surface tension lowering. The results are essential for the assessment of the aerosol indirect effect on climate. In more detail, hygroscopic growth and cloud condensation nuclei activation are key processes for accurately modeling the climate impacts of organic particulate matter. Nevertheless, the microphysical mechanisms of these processes remain unresolved. The project results focus on complex thermodynamic behaviors, including humidity-dependent hygroscopicity, diameter-dependent cloud condensation nuclei activity, and liquid-liquid phase separation in the laboratory for biogenically derived secondary organic material representative of similar atmospheric organic particulate matter. These behaviors can be explained by the non-ideal mixing of water with hydrophobic and hydrophilic organic components. The non-ideality-driven liquid-liquid phase separation further enhances water uptake and induces lowered surface tension at high relative humidity, which results in a lower barrier to cloud condensation nuclei activation. By comparison, secondary organic material representing anthropogenic sources does not exhibit complex thermodynamic behavior. The combined results highlight the importance of detailed thermodynamic representations of the hygroscopicity and cloud condensation nuclei activity in models of the Earth’s climate system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Exciton size and binding energy limitations in one-dimensional organic materials

In current organic photovoltaic devices, the loss in energy caused by the charge transfer step necessary for exciton dissociation leads to a low open circuit voltage, being one of the main reasons for rather low power conversion efficiencies. A possible approach to avoid these losses is to tune the exciton binding energy to a value of the order of thermal energy, which would lead to free charges upon absorption of a photon, and therefore increase the power conversion efficiency towards the Shockley-Queisser limit. We determine the size of the excitons for different organic molecules and polymers by time dependent density functional theory calculations. For optically relevant transitions, the exciton size saturates around 0.7 nm for one-dimensional molecules with a size longer than about 4 nm. For the ladder-type polymer poly(benzimidazobenzophenanthroline), we obtain an exciton binding energy of about 0.3 eV, serving as a lower limit of the exciton binding energy for the organic materials investigated. Furthermore, we show that charge transfer transitions increase the exciton size and thus identify possible routes towards a further decrease of the exciton binding energy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Gas cluster ion beam for the characterization of organic materials in submarine basalts as Mars analogs

The solar system contains large quantities of organic compounds that can form complex molecular structures. The processing of organic compounds by biological systems leads to molecules with distinctive structural characteristics; thus, the detection and characterization of organic materials could lead to a high degree of confidence in the existence of extra-terrestrial life. Given the nature of the surface of most planetary bodies in the solar system, evidence of life is more likely to be found in the subsurface where conditions are more hospitable. Basalt is a common rock throughout the solar system and the primary rock type on Mars and Earth. Basalt is therefore a rock type that subsurface life might exploit and as such a suitable material for the study of methods required to detect and analyze organic material in rock. Telluric basalts from Earth represent an analog for extra-terrestrial rocks where the indigenous organic matter could be analyzed for molecular biosignatures. This study focuses on organic matter in the basalt with the use of surface analysis techniques utilizing Ar gas cluster ion beams (GCIB); time of flight secondary ion mass spectrometry (ToF-SIMS), and x-ray photoelectron spectroscopy (XPS), to characterize organic molecules. Tetramethylammonium hydroxide (TMAH) thermochemolysis was also used to support the data obtained using the surface analysis techniques. The authors demonstrate that organic molecules were found to be heterogeneously distributed within rock textures. A positive correlation was observed to exist between the presence of microtubule textures in the basalt and the organic compounds detected. From the results herein, the authors propose that ToF-SIMS with an Ar GCIB is effective at detecting organic materials in such geological samples, and ToF-SIMS combined with XPS and TMAH thermochemolysis may be a useful approach in the study of extra-terrestrial organic material and life.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hybrid Inorganic-Organic Materials with an Optoelectronically Active Aromatic Cation: (C 7 H 7 ) 2 SnI 6 and C 7 H 7 PbI 3

Inorganic materials with organic constituents—hybrid materials—have shown incredible promise as chemically tunable functional materials with interesting optical and electronic properties. Here, the preparation and structure are reported of two hybrid materials containing the optoelectronically active tropylium ion within tin- and lead-iodide inorganic frameworks with distinct topologies. The crystal structures of tropylium tin iodide, (C 7 H 7 ) 2 SnI 6 , and tropylium lead iodide, C 7 H 7 PbI 3 , were solved using high-resolution synchrotron powder X-ray diffraction informed by X-ray pair distribution function data and high-resolution time-of-flight neutron diffraction. Tropylium tin iodide contains isolated tin(IV)-iodide octahedra and crystallizes as a deep black solid, while tropylium lead iodide presents one-dimensional chains of face-sharing lead(II)-iodide octahedra and crystallizes as a bright red-orange powder. Experimental diffuse reflectance spectra are in good agreement with density functional calculations of the electronic structure. Calculations of the band decomposed charge densities suggest that the deep black color of tropylium tin iodide is attributed to iodide ligand to tin metal charge transfer, while the bright red-orange color of tropylium lead iodide arises from charge transfer between iodine and tropylium states. Understanding the origins of the observed optoelectronic properties of these two compounds, with respect to their distinct topologies and organic–inorganic interactions, provides insight into the design of tropylium-containing compounds for potential optical and electronic applications.

Maughan, Annalise E.↗