Directed Self Assembly of Block Copolymers onTwo Dimensional Chemical Patterns Fabricated by Electro Oxidation Nanolithography
N/A
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
N/A
The self-assembly of block copolymers thin films laterally confined within square geometries that are incompatible with the bulk packing symmetry of the block copolymer microdomains is investigated. The lateral confinement is provided by chemical patterns made by oxidation nanolithography of octadecyltrichlorosilane-coated silicon surfaces. We find that the size and shape of the confinement affect the order of the block copolymer microdomains and their packing symmetries. Specifically, if the size of the square pattern is smaller than the characteristic grain size the hexagonally packed microdomains form a single-crystal oriented along the edges of the pattern and with 'edge-boundaries' located preferentially at the perimeter of the pattern. If the size of the pattern is comparable with the natural bulk period of the copolymer, the packing symmetry changes from hexagonal to square. In this case the ordering induced by the pattern edges becomes dominant allowing the square lattice to be more stable than the hexagonal one.
Experimental results on the conditions of activation of probe nanolithography of a thin titanium film by means of local anodic oxidation are reported. It is established that ultraviolet stimulation reduces the geometric dimensions of nanometric oxide structures. The stimulation is accompanied by an increase in the amplitude and duration of the threshold voltage pulse, correspondingly, from 6 to 7 V and from 50 to 100 ms at the relative humidity 50%. The experimental data on the effect of the cantilever coating material and substrate temperature on the geometric dimensions of nanometric oxide structures are reported.
The photocatalytic self-cleaning characteristics of titania facilitate the fabrication of reuseable templates for protein nanopatterning. In this work, titania nanostructures were fabricated over square centimeter areas by interferometric lithography (IL) and nanoimprint lithography (NIL). With the use of a Lloyd’s mirror two-beam interferometer, self-assembled monolayers of alkylphosphonates adsorbed on the native oxide of a Ti film were patterned by photocatalytic nanolithography. In regions exposed to a maximum in the interferogram, the monolayer was removed by photocatalytic oxidation. In regions exposed to an intensity minimum, the monolayer remained intact. After exposure, the sample was etched in piranha solution to yield Ti nanostructures with widths as small as 30 nm. NIL was performed by using a silicon stamp to imprint a spin-cast film of titanium dioxide resin; after calcination and reactive ion etching, TiO 2 nanopillars were formed. For both fabrication techniques, subsequent adsorption of an oligo(ethylene glycol) functionalized trichlorosilane yielded an entirely passive, protein-resistant surface. Near-UV exposure caused removal of this protein-resistant film from the titania regions by photocatalytic degradation, leaving the passivating silane film intact on the silicon dioxide regions. Proteins labeled with fluorescent dyes were adsorbed to the titanium dioxide regions, yielding nanopatterns with bright fluorescence. Subsequent near-UV irradiation of the samples removed the protein from the titanium dioxide nanostructures by photocatalytic degradation facilitating the adsorption of a different protein. The process was repeated multiple times. These simple methods appear to yield durable, reuseable samples that may be of value to laboratories that require nanostructured biological interfaces but do not have access to the infrastructure required for nanofabrication.
We investigate the temporal stability of YBa2Cu3O7 Josephson junctions created by ion irradiation through a nano-scale implant mask fabricated using electron beam lithography and reactive ion etching. A comparison of current-voltage characteristics measured for junctions after fabrication and eight years of storage at room temperature show a slight decrease in critical current and increase in normal state resistance consistent with broadening of the weaklink from diffusion of defects. Shapiro step measurements performed 8 years after fabrication reveal that device uniformity is maintained and is strong evidence that these devices have excellent temporal stability for applications.
We have developed a new nanochannel fabrication technique using chemical-mechanical polishing (CMP) and thermal oxidation. With this technique, it is possible to control the width, length, and depth of the nanochannels without the need for nanolithography.
Iron nanoparticles were employed to induce the synthesis of diamond on molybdenum, silicon, and quartz substrates. Diamond films were grown using conventional conditions for diamond synthesis by hot filament chemical vapor deposition, except that dispersed iron oxide nanoparticles replaced the seeding. This approach to diamond induction can be combined with dip pen nanolithography for the selective deposition of diamond and diamond patterning while avoiding surface damage associated to diamond-seeding methods.
We have developed a new nanochannel fabrication technique using chemical-mechanical polishing (CMP) and thermal oxidation. With this technique, it is possible to control the width, length, and depth of the nanochannels without the need for nanolithography. The use of sacrificial SiO2 layers allows the fabrication of centimeter-long nanochannels. In addition, the fabrication process is CMOS compatible. We have successfully fabricated an array of extremely long and narrow nanochannels (i.e. 10 mm long, 25 nm wide and 100 nm deep) with smooth inner surfaces.
Lithographic patterning on emerging nanomaterials is one of essential ingredients for the development of new functional nanomaterial and device systems. Focused electron beam induced processing (FEBIP) in combination with an on-demand reconfigurable precursor injection system enables the highest resolution and controllability of nanolithography on two-dimensional (2D) nanomaterials. FEBIP allows for localized atomic-to-nanoscale engineering of nanomaterials and devices in a multi-mode format including geometrical patterning, functionalization/defect formation/doping, metal/metal oxide deposition, interface fusion and activation, active channel cleaning. This chapter discusses the scientific bases and showcases the state-of-the-art FEBIP technologies with a specific focus on functional lithography of 2D nanomaterials and provides future prospects of FEBIP technologies to address real industrial needs for the development of high-performance, next-generation functional devices.
The Keggin structure is prevalent in nature and synthesis, self-assembled from many metals across the periodic table as both isolated clusters and building blocks of condensed framework oxides. Here we present a one-step synthesis to obtain the sodium-centered butyltin Keggin ion in high yield and high purity, important for mechanistic nanolithography studies. Extensive solution characterization (small-angle X-ray scattering, 1 H, 13 C and 119 Sn nuclear magnetic resonance, electrospray mass spectrometry) also confirms solutions contain only the Na-centered dodecamers. We report three butyltin Keggin structures: the β-isomer (β-NaSn 12 ), the γ-isomer (γ-NaSn 12 ), and a γ-isomer capped with an additional butyltin (γ-NaSn 13 ). All Keggin ions presented here have the general formula [NaO 4 BuSn 12 (OCH 3 ) 12 (O,OH) 12 ] (Bu = butyl), and are of neutral charge. The lack of counterions (OH – ) facilitates mechanistic lithographic studies without inference from hydrolysis chemistry. The methanol reaction media enables solubility and ligates the cluster, both important to obtain high purity materials. Despite the monospecific nature of the NaSn 12 solutions, NMR reveals both isomer interconversion and ligand exchange. DFT computational comparisons of our three isolated structures, the capped β-isomer (β-NaSn 13 ), along with hypothetical α-isomers (α-NaSn 12 and α-NaSn 13 ), showed that the stability ranks β-NaSn 12 > γ-NaSn 12 > α-NaSn 12 , consistent with experimental observation. The uncapped isomers were computationally determined to be more stable than the respective capped analogues. These clusters provide a unique opportunity to investigate the lower-symmetry Keggin isomers, and to determine structural factors that control isomer selectivity as well as isomer labilization.
Silicon nanowires are key elements to fabricate very sensitive mechanical and electronic devices. We provide a method to fabricate sub-12 nm silicon nanowires in thickness by combining oxidation scanning probe lithography and anisotropic dry etching. Extremely thin oxide masks (0.3–1.1 nm) are transferred into nanowires of 2–12 nm in thickness. The width ratio between the mask and the silicon nanowire is close to one which implies that the nanowire width is controlled by the feature size of the nanolithography. This method enables the fabrication of very small single silicon nanowires with cross-sections below 100 nm{sup 2}. Those values are the smallest obtained with a top-down lithography method.
We report our studies of the nanolithographic surface modifications induced by an Atomic Force Microscope (AFM) in epitaxial thin films of oxygen deficient Lanthanum Barium Manganese Oxide (La{sub 0.67}Ba{sub 0.33}MnO{sub 3−δ}). The pattern characteristics depend on the tip voltage, tip polarity, voltage duration, tip force, and humidity. We have used Electron Energy Dispersive X-Ray Spectroscopy (EDS) to analyze the chemical changes associated with the surface modifications produced with a negatively biased AFM tip. A significant increase in the oxygen stoichiometry for the patterned regions relative to the pristine film surface is observed. The results also indicate changes in the cation stoichiometry, specifically a decrease in the Lanthanum and Manganese concentrations and an increase in the Barium concentration in the patterned regions.
Organic–inorganic hybrid resists are emerging as an effective way of addressing stringent process requirements for aggressive down-scaling of semiconducting devices. Yet, hybrid resists generally require complex chemical synthesis while being predominantly negative-tone with high dose requirements. For positive-tone processes and high-aspect-ratio pattern transfers, resist choices are limited to costly, non-hybrid alternatives, whose etch resistance is still inferior compared with hybrid resists. In this work, we demonstrate a novel hybrid positive-tone resist platform utilizing simple ex situ vapor-phase inorganic infiltration into standard resist materials. A model system based on poly(methyl methacrylate) (PMMA) thin film hybridized with aluminum oxide has been demonstrated for electron-beam lithography patterning, featuring a fully controllable critical exposure dose, contrast, and etch resistance. The hybrid resist not only achieves contrast as high as ~30, six-fold enhancement over standard PMMA, but also enables Si nanostructures with resolution down to ~30 nm and an aspect ratio as high as ~17, owing to enhancement of the Si etch selectivity to ~70, with an estimated achievable maximum of ~300, far exceeding known commercial positive-tone resist systems. The easy implementabilility, combined with versatile ex situ control of resist characteristics, makes this hybrid resist synthesis method uniquely suited for addressing the resist performance and high throughput required for advanced nanolithography techniques, such as extreme ultraviolet lithography, possibly.
In this paper, we developed a new dip-pen nanolithography (DPN) method. Using this method, we fabricated conductive nanowires with diameters of 30–50 nm on silicon substrates. To accomplish this, indium was transferred from an atomic force microscopy tip to the surface by applying a potential difference between the tip and substrate. The fabricated indium nanowires were several micrometers in length. Unlike thermal DPN, our DPN method hardly oxidized the indium, producing nanowires with conductivities from 5.7 × 10{sup −3} to 4 × 10{sup −2} Ω cm.
Artificial spin-ice systems are patterned arrays of magnetic nanoislands arranged into frustrated geometries and provide insight into the physics of ordering and emergence. The majority of these systems have been realized in two-dimensions, mainly due to the ease of fabrication, but with recent developments in advanced nanolithography, three-dimensional artificial spin ice (ASI) structures have become possible, providing a new paradigm in their study. Such artificially engineered 3D systems provide new opportunities in realizing tunable ground states, new domain wall topologies, monopole propagation, and advanced device concepts, such as magnetic racetrack memory. Direct imaging of 3DASI structures with magnetic force microscopy has thus far been key to probing the physics of these systems but is limited in both the depth of measurement and resolution, ultimately restricting measurement to the uppermost layers of the system. In this work, a method is developed to fabricate 3DASI lattices over an aperture using two-photon lithography, thermal evaporation, and oxygen plasma exposure, allowing the probe of element-specific structural and magnetic information using soft x-ray microscopy with x-ray magnetic circular dichroism (XMCD) as magnetic contrast. The suspended polymer–permalloy lattices are found to be stable under repeated soft x-ray exposure. Analysis of the x-ray absorption signal allows the complex cross section of the magnetic nanowires to be reconstructed and demonstrates a crescent-shaped geometry. Measurement of the XMCD images after the application of an in-plane field suggests a decrease in magnetic moment on the lattice surface due to oxidation, while a measurable signal is retained on sub-lattices below the surface.
The self-assembly behaviors of specifically designed giant surfactants are systematically studied in thin films using grazing incident X-ray and transmission electron microscopy (TEM), focusing on the effects of head surface functionalities and molecular architectures on nanostructure formation. Two molecular nanoparticles (MNPs) with different affinities, i.e., hydrophilic carboxylic acid functionalized [60]fullerene (AC60) and omniphobic fluorinated polyhedral oligomeric silsesquioxane (FPOSS), are utilized as heads of the giant surfactants. By covalently tethering these functional MNPs onto the chain end or the junction point of polystyrene-block-poly(ethylene oxide) (PS-b-PEO) diblock copolymer, linear and star-like giant surfactants possess distinct molecular architectures are constructed. With fixed length of the PEO block, the molecular weight change of the PS block originates the phase formation and transition. Due to the distinct affinity, the AC60-based giant surfactants form two-component morphologies, while three-component morphologies are found in the FPOSS-based ones. A PS block stretching parameter is introduced to characterize the PS chain conformation in different morphologies. The highly diverse self-assembly behaviors and the tunable dimensions in thin films suggest the giant surfactants could be a promising and robust platform for nanolithography applications.
We report the controlled integration, via dip pen nanolithography, of monolayer dots of ferritin-based CoO nanoparticles (12 μ{sub B}) into the most sensitive areas of a microSQUID sensor. The nearly optimum flux coupling between these nanomagnets and the microSQUID improves the achievable sensitivity by a factor 10{sup 2}, enabling us to measure the linear susceptibility of the molecular array down to very low temperatures (13 mK). This method opens the possibility of applying ac susceptibility experiments to characterize two-dimensional arrays of single molecule magnets within a wide range of temperatures and frequencies.
Here we report that enabling memristive, neuromorphic, and quantum based computing as well as efficient mainstream energy storage and conversion technologies requires next generation of materials customized at the atomic scale. This requires full control of atomic arrangement and bonding in three dimensions. The last two decades witnessed substantial industrial, academic, and government research efforts directed towards this goal through various lithographies and scanning probe based methods. These technologies emphasize 2D surface structures, with some limited 3D capability. Recently, a range of focused electron and ion based methods have demonstrated compelling alternative pathways to achieving atomically precise manufacturing of 3D structures in solids, liquids, and at interfaces. Electron and ion microscopies offer a platform that can simultaneously observe dynamic and static structures at the nano and atomic scales, and also induce structural rearrangements and chemical transformation. The addition of predictive modeling or rapid image analytics and feedback enables guiding these in a controlled manner. Here, we review the recent results that used focused electron and ion beams to create free-standing nanoscale 3D structures, radiolysis and the fabrication potential with liquid precursors, epitaxial crystallization of amorphous oxides with atomic layer precision, as well as visualization and control of individual dopant motion within a 3D crystal lattice. These works lay the foundation for new approaches to directing nanoscale level architectures and offer a potential roadmap to full 3D atomic control in materials. Lastly, in this perspective we lay out the gaps that currently constrain the processing range of these platforms, reflect on indirect requirements, such as the integration of large scale data analysis with theory, and discuss future prospects of these technologies.