Search NASA⌕ Search

SEARCH · Search NASA

Results for “oxidized oxygen”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Mathematical Modeling of the Potential and Time Dependence of Ir Dissolution from Hydrous Ir Oxide Oxygen Evolution Catalysts

One of the main degradation mechanisms of hydrous iridium oxide acidic oxygen evolution reaction (OER) catalysts is dissolution and loss into the acidic membrane. While degradation models have been proposed, there is a gap in understanding the potential and time dependence of the iridium dissolution reaction and its mechanistic underpinnings. In this work, Ir dissolution rates measured as a function of time and potential via time-resolved inductively-coupled plasma mass spectrometry (ICP-MS) in aqueous acidic electrolyte are used to establish a mathematical model for Ir dissolution. The mathematical model is generated using proposed formation and dissolution reactions for Ir species. Through comparison with the ICP-MS data and existing information on the potential-dependent Ir phase, we find that the potential and time-dependence of dissolution can be modeled as dissolution of an oxide phase, here represented as IrO 2 , with potential dependent kinetics and formation of a passivating species, a process with a rate-limiting step that is not potential dependent. This understanding of the potential dependence of dissolution and passivation kinetics using aqueous electrolyte half-cell measurements can be used to predict the degradation of Ir oxide in operating energy conversion devices relying on the OER, such as proton-exchange membrane water electrolyzers.

Kariuki, Nancy N. [Argonne National Laboratory (AN↗
DOE OSTI2023

Assessment of exchange-correlation functionals on oxygen vacancy formation energies of metal oxides

Oxygen vacancies are a common defect in oxides and play vital roles in many technological applications such as oxygen separation, catalytic reactors, solid oxide fuel cells, and solar thermochemical water splitting. The oxygen vacancy formation energy is directly related to the oxide reduction enthalpy and the vacancy concentration and, therefore, is a key quantity underlying these applications. The complexity of measuring oxygen vacancy formation energies experimentally suggests the utility of calculations based on density functional theory (DFT). However, the calculated results are strongly dependent on the exchange-correlation functionals and other parameters such as the Hubbard U . In this work, we compare the performance of the meta-GGA strongly constrained and appropriately normed (SCAN) functional and the commonly used semilocal generalized gradient approximation (GGA) functionals with experimental values of structural parameters, band gaps, magnetic structures, and oxygen vacancy formation energies for six representative oxides, i.e., CaMnO 3 , SrMnO 3 , LaMnO 3 , YMnO 3 , LaFeO 3 , and CeO 2 . Further, our results show that SCAN usually has better agreement with the experimental lattice constants and band gaps and larger magnetic moments than the commonly used GGA functionals. Although SCAN overestimates the oxygen vacancy formation energies of transition metal oxides and therefore requires unusually large Hubbard U values to reproduce the experimental reduction enthalpies, it does predict the correct oxygen vacancy formation energy of CeO 2 , which challenges the commonly used GGA and hybrid functionals. Our results underscore the challenges that exist in describing these complex oxides by DFT and may shed light on developing more accurate exchange-correlation functionals for oxygen vacancy formation energy calculations.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Platinum Surface Oxide and Oxygen Reduction Reaction Kinetics during Transient Fuel Cell Operation

Pt surface oxide coverage (POC) and Oxygen Reduction Reaction (ORR) were measured under a range of operating conditions in a Proton Exchange Membrane Fuel Cell (PEMFC). Sensitivity analysis suggests that adsorption of sulfonate groups of the ionomer on the Pt surface plays an important role in POC and ORR kinetics. Although both Pt oxide growth and ORR activity decay follow a logarithm of time behavior, it is found that ORR kinetics are affected by at least two different types of Pt oxide. A semi-empirical ORR kinetic model is proposed taking into account the effect of ionomer and Pt oxide types. The model is capable of providing a quantitative prediction of POC and ORR activity over a range of potential, temperature, relative humidity, and time that is relevant to normal PEMFC operation.

Electrochemistry↗
DOE OSTI2024

Tuning Catalytically Active Single Sites in Nonstoichiometric, Mixed Metal Oxides for Oxygen Electrocatalysis (Final Technical Report)

The objective of the proposed work is to employ controlled synthesis, advanced characterization, detailed electrochemical testing and theoretical calculations to develop a framework that would guide the design of robust, non-stoichiometric mixed metal oxides for oxygen electrocatalysis. In this research plan, we focus around the idea of tuning the metal ion composition and environment to create single atom centers with the utmost electrocatalytic activity. We hypothesized that tuning the cationic sites in nonstoichiometric mixed metal oxides will lead to single 4d/5d metal surface sites with optimal catalytic activity for low temperature oxygen reduction (ORR) and oxygen evolution (OER) at solid/liquid interfaces. We will focus on different crystal structures of these oxides including Ruddlesden-Popper (R-P) oxides, simple perovskites and pyrochlores due to their flexibility in accommodating different metal cation dopants, and the fact that they represent variations in the cationic arrangements in non-stoichiometric mixed metal oxide structures, which will lead to an understanding of how bulk crystal structure effects catalytic activity and stability of these systems.

08 HYDROGEN↗
DOE OSTI2024

Investigating New Particle Formation and Growth Over an Urban Location in the Eastern Mediterranean

Abstract This study investigates the new particle formation (NPF) events at an urban location in the Eastern Mediterranean. Particle size distribution, particulate chemical composition, and gaseous pollutants were monitored in Rehovot, Israel (31°53″N 34°48″E) during two campaigns: from April 29 to 3 May 2021 (Campaign 1) and from May 3 to 11 May 2023 (Campaign 2), coinciding with an intensive bonfire burning festival. The organic aerosols (OA) source apportionment identified two major factors—Hydrocarbon‐like OA and Biomass‐burning OA—as well as two secondary factors—MO‐OOA (more oxidized‐oxygenated OA) and LO‐OOA (low oxidized oxygenated OA). NPF events were frequently observed during the day (mostly well‐defined nucleation events) and at night (burst of ultrafine mode particles without any discernible growth). A condensation sink value of (9.4 ± 4.0) × 10 −3 s −1 during Campaign 1 and (14.2 ± 6.0) × 10 −3 s −1 during Campaign 2 was obtained. The daytime events were associated with enhanced sulfuric acid proxy concentrations of (2–12) × 10 6 molecules cm −3 , suggesting the role of gas‐phase photochemistry in promoting NPF. A novel approach of hybrid positive matrix factorization analysis was used to deconvolve the chemical species responsible for the observed events. The results suggest the involvement of multiple components, including ammonium sulfate and MO‐OOA, in the nucleation; Nitrate, HOA and LO‐OOA participate in the subsequent particle growth for the daytime events. Nighttime events involve only semi‐volatile species (LO‐OOA, HOA and nitrate) along with ammonium sulfate.

Meteorology & Atmospheric Sciences↗
DOE OSTI2024

Epitaxial oxide ionotronics: Interfaces and oxygen vacancies

Oxide ionotronics is an interdisciplinary field in which systems and devices rely on the migration of ions/ionic defects to alter or drive functionality. In this perspective, we focus on epitaxial oxide heterostructures and the contributing roles of oxygen vacancies and interfaces in ionotronics. We begin with a description of oxygen vacancy behavior, with a focus on vacancy ordering and the effects of interfaces and electric fields on particular epitaxial oxide systems. We then emphasize the use of synchrotron x-ray techniques for investigating system structure and dynamics in situ at interfaces and surfaces. Finally, an outlook on the future of epitaxial oxide ionotronics is provided, and several key areas for research are identified, such as freestanding heterostructures, combinatorial synthesis and machine learning, and next-generation synchrotron x-ray characterization.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Constraining Interlayer Slipping in P2-Type Layered Oxides with Oxygen Redox by Constructing Strong Covalent Bonds

Lattice oxygen redox (LOR) in P2-type layered oxides is an effective strategy to break through the limit of energy density of conventional cathodes due to its high redox potential (>4 V vs. Na + /Na) as well as extra capacity. Nevertheless, LOR induced local structure distortion and irreversible phase transitions cause serious electrochemical performance degradation, hindering the practical applications. In this work, we propose that the generation of the OP4 phase can be replaced with the Z phase by introducing Sb element with higher ionic potential and strong covalent bonds within the TMO 6 octahedron. Z phase transition is realized by constraining interlayer slipping between adjacent TM layers compared to OP4, which reduces the strain in the layered structure, lowers the Na+ diffusion energy barrier and creates more efficient Na+ diffusion channels. Consequently, Sb-substituted oxides demonstrates excellent kinetics, rate capability (79 mAh g -1 at 1 A g -1 ) in half cell and a high energy density of 487 Wh kg -1 (on cathode) in full cell.

25 ENERGY STORAGE↗
DOE OSTI2023

Synergistic effects of mixing and strain in high entropy spinel oxides for oxygen evolution reaction

Developing stable and efficient electrocatalysts is vital for boosting oxygen evolution reaction (OER) rates in sustainable hydrogen production. High-entropy oxides (HEOs) consist of five or more metal cations, providing opportunities to tune their catalytic properties toward high OER efficiency. This work combines theoretical and experimental studies to scrutinize the OER activity and stability for spinel-type HEOs. Density functional theory confirms that randomly mixed metal sites show thermodynamic stability, with intermediate adsorption energies displaying wider distributions due to mixing-induced equatorial strain in active metal-oxygen bonds. The rapid sol-flame method is employed to synthesize HEO, comprising five 3d-transition metal cations, which exhibits superior OER activity and durability under alkaline conditions, outperforming lower-entropy oxides, even with partial surface oxidations. The study highlights that the enhanced activity of HEO is primarily attributed to the mixing of multiple elements, leading to strain effects near the active site, as well as surface composition and coverage.

08 HYDROGEN↗
DOE OSTI2025

Enhanced Activity in Layered Metal-Oxide-Based Oxygen Evolution Catalysts by Layer-by-Layer Modulation of Metal-Ion Identity

Few-layered potassium nickel and cobalt oxides show drastic differences in catalytic activity based on metal ion preorganization. Uniform compositions [(CoO 2 /K) 6 or (NiO 2 /K) 6 ] show limited activity, while homogeneously mixed-metal cobalt/nickel oxides [(Co n Ni (1–n) O 2 /K) 6 ] display moderate improvement. However, a layer-by-layer arrangement of alternating cobalt and nickel oxide sheets [e.g., (CoO 2 /K/NiO 2 /K)] provides superior catalytic performance, reducing the oxygen evolution overpotential by ∼200–400 mV. Density functional theory simulations provide an illustration of the electronic properties (density of states and localization of orbitals) that promote catalysis in the layer-segregated materials over those of homogeneous composition. This study reveals that atomic preorganization of metal ions within layered catalysts plays a more crucial role than the overall metal composition in enhancing catalytic efficiency for oxygen evolution.

catalysts↗
DOE OSTI2023

Structural modulation and spin glassiness upon oxidation in oxygen storage material LnFeMnO 4+x for Ln = Y, Lu, and Yb

The mixed valence multiferroic LnFe 2+ Fe 3+ O 4 (where Ln = Y, Lu, and Yb) can reversibly uptake oxygen into its lattice, which is evidenced by a crystallographic phase transition along with the appearance of structural modulations. In this study, we show that the Mn-substituted version of this multiferroic can also be readily oxidized to LnFe 3+ Mn 3+ O 4.5 revealing similar oxygen storage behavior. Through neutron, electron, and synchrotron x-ray diffraction studies, we observe a structural modulation that we attribute to a displacement wave in the fully oxidized compound. This wave exhibits commensurability with a wavevector q = (-2/7, 1/7, 0). Bond valence summation analysis of plausible interstitial oxygen positions suggests that oxygen insertion likely occurs at the middle of the Fe/Mn–O bipyramid layers. The structural modulation of LnFeMnO 4.5 is two-dimensional, propagates along the ab-plane, and is highly symmetric as 12 identical modulation vectors are observed in the diffraction patterns. The nature of the lanthanide, Ln 3+ , does not seem to influence such modulations since we observe identical satellite reflections for all three samples of Ln = Y, Lu, and Yb. Both LnFeMnO 4 and LnFeMnO 4.5 display spin glassy behavior with 2D short-range magnetic ordering being observed in LnFeMnO 4 . Analysis of the neutron diffraction data reveals a correlation length of ~10 nm. Upon oxidation to LnFeMnO 4.5 , the short-range magnetic order is significantly suppressed.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Deciphering competing elementary steps to correlate electrocatalyst chemical state with activity

The overpotential in multielectron transfer heterogeneous electrocatalysis fundamentally arises from thermodynamic and kinetic disparities among elementary steps; however, deciphering coupled and competing steps has long remained a challenge. Here, we establish an electrochemical deconvolution paradigm based on key processes in electrocatalytic reactions, such as charge accumulation, electron/proton transfer, and intermediate evolution, to resolve competing elementary steps. Taking the oxygen evolution reaction as a prototypical reaction, we design a model catalyst featuring a precise isolated cation-anion vacancy pair and track the previously elusive electrochemical behavior of lattice oxygen by disentangling interference from adsorbed oxygen intermediates. Mechanistically, the lattice oxygen oxidation pathway originates from the spontaneous, nonelectrochemical deprotonation of replenished water molecules coordinated to unsaturated cation sites. Alternating current techniques further reveal that although lattice oxygen oxidation requires a higher potential than metal oxidation, it exhibits faster kinetics, providing insight into its superior catalytic activity. These findings establish a direct experimental correlation between the initial chemical state and the catalytic activity and prove surface-confined lattice oxygen cycling. Furthermore, expanding conventional potential-current analysis into a multidimensional framework enables disentanglement of thermodynamic and kinetic contributions of key elementary steps, thereby guiding the rational optimization of various complex multielectron transfer reactions.

OER↗
DOE OSTI2023

Highly Oxidized Oxide Surface toward Optimum Oxygen Evolution Reaction by Termination Engineering

The oxygen evolution reaction (OER) is a critical step for sustainable fuel production through electrochemistry process. Maximizing active sites of nanocatalyst with enhanced intrinsic activity, especially the activation of lattice oxygen, is gradually recognized as the primary incentive. Since the surface reconfiguration to oxyhydroxide is unavoidable for oxygen-activated transition metal oxides, developing a surface termination like oxyhydroxide in oxides is highly desirable. In this work, we demonstrate an unusual surface termination of (111)-facet Co 3 O 4 nanosheet that is exclusively containing edge-sharing octahedral Co 3+ similar to CoOOH that can perform at approximately 40 times higher current density at 1.63 V (vs RHE) than commercial RuO 2 . It is found that this surface termination has an oxidized oxygen state in contrast to standard Co-O systems, which can serve as active site independently, breaking the scaling relationship limit. Finally, this work forwards the applications of oxide electrocatalysts in the energy conversion field by surface termination engineering.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Surface Vacancy Engineering Re-Routes First-Cycle Redox for Stabilized Li-Rich Layered Cathodes

We demonstrate that atomic-scale surface disorder can control the first-cycle redox sequence of Li-rich layered oxides, eliminating the detrimental process of oxygen release and lattice collapse that degrades performance. In Li1.14Ni0.32Mn0.54O2 (LNMO), a simple chemical treatment introduces oxygen and transition metal (TM) vacancies confined to the particle surface while preserving the bulk layered framework. Multi-modal synchrotron analyses reveal that these vacancies trigger an early oxygen oxidation below 4.4 V, delay nickel oxidation to higher potential, and suppress the formation of covalent Ni4+─O states. This modified pathway prevents irreversible oxygen release, suppresses manganese dissolution, and maintains metal-oxygen coordination at high voltages. Consequently, the treated cathode delivers higher first-cycle Coulombic efficiency (CE), mitigated voltage fade, and superior capacity retention. By directly linking engineered surface disorder to redox reactions and associated structural transformations, this work establishes a general design principle for durable, high-energy-density cathodes.

Kang, Seongkoo↗
DOE OSTI2024

Oxygen redox activities governing high-voltage charging reversibility of Ni-rich layered cathodes

A schematic illustration indicative of the improved structural reversibility through stabilizing oxidized oxygen by Al doping. The chemical reactions and phase transitions at high voltages are generally considered to determine the electrochemical properties of high-voltage layered cathodes such as Ni-rich rhombohedral oxides. Even if significantly higher SOCs (states-of-charge) are utilized above the capability of transition metal redox (primarily Ni and Co), the effect of oxygen redox on Ni-rich rhombohedral oxides still looks mysterious thereby necessitating research that can clarify the relationship between redox reactions and phase transitions. Here, we performed a comprehensive and comparative study of the cationic and anionic redox reactions, as well as the structural evolution of a series of commercial Ni-rich layered oxides with and without Al doping. We combined the results from X-ray spectroscopy, operando electrochemical mass spectrometry, and neutron diffraction with electrochemical properties and thereby revealed the different oxygen redox activities associated with structural and electrochemical degradations. We reveal that Al doping suppresses the irreversible oxygen release but enhances the lattice oxygen oxidization. With this modulated oxygen redox activity, the Ni-rich layered oxides’ notorious H2–H3 structural phase transition becomes highly reversible. Our findings disentangle the different oxygen redox activities during high-voltage cycling and clarify the role of dopants in the Ni-rich layered oxides in terms of structural and electrochemical stability, shedding light on the future direction of optimizing layered cathode materials for safer high energy-density secondary batteries.

Lee, Gi-Hyeok↗
DOE OSTI2025

Mechanistic study of a CO-free pathway in the methanol oxidation reaction over oxygen vacancies in NiOOH

The methanol oxidation reaction is a key reaction in direct methanol fuel cells. Prior research indicates that if oxygen vacancies in NiOOH serve as the active sites, the methanol oxidation mainly proceeds through the formate-involving pathway, which is a CO-free pathway, distinct from the conventional path over transition metal catalysts, though the fundamental reason for this suppressed CO formation is unclear. Herein, we report density functional theory calculations, through which we uncover the underlying reasons for this alternate path of methanol oxidation over the oxygen vacancies in NiOOH. We find that the existence of oxygen vacancies in NiOOH affects the adsorption configuration of adsorbates and that the interfacial charge transfer is minimal for CHO and CO intermediates. In addition, CHO, a key intermediate to form CO, adsorbs at the oxygen vacancy through the oxygen atom, leading to low stability due to the incomplete valence saturation of the carbon atom. This weak electronic interaction and instability effectively inhibit CHO formation and, consequently, CO formation. These insights provide valuable guidance for the development of efficient and CO-tolerant catalysts for methanol oxidation.

Ho, Thy [University of Oklahoma, Norman, OK (Unite↗
DOE OSTI2023

Understanding the Degradation of La 1−x Sr x FeO 3−δ (0 ≤ x ≤ 1) Perovskite Oxides during the Oxygen Evolution Reaction in Alkaline Solution

Perovskite oxides are an emerging class of highly active catalysts for the oxygen evolution reaction (OER); however, their electrochemical stability remains poorly understood. Here, we report a systematic evaluation of the OER activity and stability of La 1−x Sr x FeO 3-δ perovskites in 1 M KOH. Their initial OER activity first increases with increasing Sr content (fromx= 0 to 0.8), and then decreases when the Sr content is increased to 1. Their stability evaluated by monitoring the element leaching from the electrodes show that La does not leach at a detectable rate, but Sr and Fe leach substantially. The leaching of Sr occurs at similar rates under open circuit potential (OCP) and OER potential, suggesting a nonelectrochemical dissolution process. The leaching of Fe is, however, strongly dependent on the electrode potential. More Fe leaching is observed under the OER potential than OCP. Additionally, the electrode with higher initial OER activity leaches more Fe. These results indicate that OER facilitates the dissolution of Fe from the electrode. The leaching of Fe, in turn, is considered responsible for the activity loss of La 1-x Sr x FeO 3−δ during OER. This study brings new insight into the degradation mechanism of La 1-x Sr x FeO 3−δ and their related perovskite oxides during electro-oxidation processes.

Electrochemistry↗
DOE OSTI2022

Silica-encapsulated Fe 2 O 3 oxygen carriers for selective chemical looping combustion of hydrogen

Methane dehydroaromatization (MDA) combined with chemical looping (CL) combustion of hydrogen can overcome the MDA thermodynamic constraints conventionally limiting conversion. Development of selective hydrogen-oxidation oxygen carriers in the presence of aromatics in the CL is key to improve MDA performance in the coupled reaction system. Here, in this paper, we show that a novel oxygen carrier (silica-encapsulated Fe 2 O 3 with Fe/Si mole ratio of 1.2) yields high overall methane conversion (49%) and aromatics yield (up to 36%) during 4 h of recirculating a stream in the developed system. A silica layer encapsulating Fe 2 O 3 favors hydrogen transport and oxidation, preventing aromatics diffusing to the Fe 2 O 3 surface. A close physical contact between iron oxide particles and silica, and near complete encapsulation of the particles by the silica layer can facilitate hydrogen conversion without full depletion of iron oxides by forming iron silicates. The silica-encapsulated iron oxide particles can be reoxidized in air after depletion of its oxidative capacity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗