Search NASA⌕ Search

SEARCH · Search NASA

Results for “oxygen precipitates”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Diffusion-driven precipitate growth and ripening of oxygen precipitates in boron doped silicon by dynamical x-ray diffraction

X-ray Pendellösung fringes from three silicon single crystals measured at 900 °C are analyzed with respect to density and size of oxygen precipitates within a diffusion-driven growth model and compared with TEM investigations. It appears that boron doped (p+) material shows a higher precipitate density and a higher strain than moderately (p-) boron crystals. In-situ diffraction reveals a diffusion-driven precipitate growth followed by a second growth regime in both materials. An interpretation of the second growth regime in terms of Ostwald ripening yields surface energy values (around 70 erg/cm{sup 2}) similar to published data. Further, an increased nucleation rate by a factor of ∼13 is found in the p+ sample as compared to a p- sample at a nucleation temperature of 450 °C.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Morphology of oxygen precipitates in silicon wafers pre-treated by rapid thermal annealing

The morphology of oxygen precipitates in Czochralski silicon wafers pre-treated by rapid thermal annealing (RTA) and subjected to a heat treatment in the temperature range between 800 °C and 1000 °C was investigated by scanning transmission electron microscopy. The samples were pre-treated by RTA in order to establish a defined supersaturation of vacancies. It was found that in such vacancy-rich samples subjected to an annealing at 800 °C three dimensional dendrites are formed. Until now, it was known that during annealing at 800 °C plate-like oxygen precipitates are formed.

36 MATERIALS SCIENCE↗

Tabula Rasa: Oxygen Precipitate Dissolution though Rapid High Temperature Processing in Silicon

Over one fourth of all monocrystalline silicon ingots suffer from a 20% performance degradation due to oxygen precipitates. Tabula Rasa (TR) is a mitigation technique that dissolves these precipitates, making them harmless. This work explores the dependence of oxygen dissolution on annealing time and temperature for the TR process to aid in solar cell process optimization. The dissolution time for oxygen precipitates was found to be more than 10 minutes for total dissolution, longer than normal TR process times in the electronics industry. The activation energy, extracted from the precipitate dissolution curves, is found to be 2.6+/-0.5 eV. This value when compared to the migration enthalpy of oxygen in silicon can be used to reveal the energy limiting proces in TR.

14 SOLAR ENERGY↗

The impact of oxygen precipitation on dislocation generation at small angle grain boundaries during seed‐assisted directional solidification of silicon

We have investigated the source of dislocations generated during growth and subsequent cooling of quasi‐monocrystalline silicon. Bi‐crystals of silicon separated by ∼5.2° tilt small angle grain boundary have been directionally solidified at two different pulling rates, i.e., 3 and 13 μm s −1 . We observe higher density of grain boundary‐associated dislocations at the ingot pulled at a lower rate. This observation is explained by the impact of oxygen precipitation behavior at the grain boundary.

Autruffe, Antoine↗

Dissolution of Oxygen Precipitate Nuclei in n-Type CZ-Si Wafers to Improve Their Material Quality: Experimental Results

We present experimental results which show that oxygen-related precipitate nuclei (OPN) present in p-doped, n-type, Czochralski wafers can be dissolved using a flash-annealing process, yielding very high quality wafers for high-efficiency solar cells. Flash annealing consists of heating a wafer in an optical furnace to temperature between 1150 and 1250 degrees C for a short time. This process produces a large increase in the minority carrier lifetime (MCLT) and homogenizes each wafer. We have tested wafers from different axial locations of two ingots. All wafers reach nearly the same high value of MCLT. The OPN dissolution is confirmed by oxygen analysis using Fourier transform infrared spectra and injection-level dependence of MCLT.

14 SOLAR ENERGY↗

Misfit strain of oxygen precipitates in Czochralski silicon studied with energy-dispersive X-ray diffraction

Annealed Czochralski Silicon wafers containing SiO{sub x} precipitates have been studied by high energy X-ray diffraction in a defocused Laue setup using a laboratory tungsten tube. The energy dispersive evaluation of the diffracted Bragg intensity of the 220 reflection within the framework of the statistical dynamical theory yields the static Debye-Waller factor E of the crystal, which gives access to the strain induced by the SiO{sub x} precipitates. The results are correlated with precipitate densities and sizes determined from transmission electron microscopy measurements of equivalent wafers. This allows for the determination of the constrained linear misfit ε between precipitate and crystal lattice. For samples with octahedral precipitates the values ranging from ε = 0.39 (+0.28/−0.12) to ε = 0.48 (+0.34/−0.16) indicate that self-interstitials emitted into the matrix during precipitate growth contribute to the lattice strain. In this case, the expected value calculated from literature values is ε = 0.26 ± 0.05. Further, the precise evaluation of Pendellösung oscillations in the diffracted Bragg intensity of as-grown wafers reveals a thermal Debye-Waller parameter for the 220 reflection B{sup 220}(293 K) of 0.5582 ± 0.0039 Å{sup 2} for a structure factor based on spherically symmetric scattering contributions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of Tabula Rasa on Process- and Light-Induced Degradation of Solar Cells Fabricated From Czochralski Silicon

Monocrystalline Si solar cells are fabricated from Czochralski (Cz) Si, which contains 10 17 –10 18 cm -3 oxygen atoms. Cz Si undergoes degradation during high-temperature thermal processing steps, such as dopant diffusion to form the p - n junction. This degradation in the bulk minority carrier lifetime can be related to the formation of oxygen precipitates. We found that a high-temperature annealing process known as tabula rasa (TR) not only mitigates process-induced degradation via oxygen precipitate nuclei dissolution, but also modifies subsequent light-induced degradation. We report on the bulk carrier lifetime of n - and p -type Cz Si after TR, which homogenizes the interstitial oxygen in the bulk Si to its monoatomic form in either an N 2 or O 2 environment. A control sample, which was not subjected to a TR processing step, experienced severe process-induced degradation during a boron emitter thermal budget as oxygen precipitates were formed in the Si bulk. These precipitates could be imaged using photoluminescence. Additionally, samples that underwent a TR processing step prior to the boron emitter thermal budget show efficient gettering of metallic impurities compared to the control sample, which showed a decline in the implied open-circuit voltage after the gettering step. Furthermore, modification of the interstitial oxygen bonding by TR had a strong effect on the light-induced degradation kinetics. Instead of a typically observed monotonic decrease, minority carrier lifetime increases first, followed by a nonmonotonic decrease over a ~20 h period. Finally, we conclude that by modifying the interstitial oxygen bonding via TR pretreatment, p -type Cz Si wafers become substantially resistant to harsh solar cell processes and strongly modified light-induced degradation, which would open alternative ways to mitigate this degradation mechanism.

14 SOLAR ENERGY↗

Tabula Rasa for n -Cz silicon-based photovoltaics

High-temperature annealing, known as Tabula Rasa (TR), proves to be an effective method for dissolving oxygen precipitate nuclei in n-Cz silicon and makes this material resistant to temperature-induced and process-induced lifetime degradation. Tabula Rasa is especially effective in n-Cz wafers with oxygen concentration >15 ppma. Vacancies, self-interstitials, and their aggregates result from TR as a metastable side effect. Temperature-dependent lifetime spectroscopy reveals that these metastable defects have shallow energy levels ~0.12 eV. Their concentrations strongly depend on the ambient gases during TR because of an offset of the thermal equilibrium between vacancies and self-interstitials. However, these metastable defects anneal out at typical cell processing temperatures =850 degrees C and have little effect on the bulk lifetime of the processed cell structures. Without dissolving built-in oxygen precipitate nuclei, high-temperature solar cell processing severely degrades the minority carrier lifetimes to below 0.1 millisecond, while TR-treated n-Cz wafers after the cell processing steps exhibit carrier lifetimes above 2.2 milliseconds.

14 SOLAR ENERGY↗

Mitigating Process Induced Degradation in p- and n-Czochralski Silicon Wafers with Tabula Rasa

We report on the bulk properties of of n- and p- type Czochralski silicon (Cz-Si) after a high-temperature annealing process known as Tabula Rasa (TR), which is primarily used to annihilate oxygen precipitates. We find significant differences in n- and p-type substrates as well as a strong dependence on the ambient in the resulting process induced degradation. We attribute this ambient dependence to either injection of interstitials or vacancies into the bulk during TR. Finally, we show that subsequent gettering is enhanced due to the annihilation of oxygen precipitates.

14 SOLAR ENERGY↗

Mitigating Process Induced Degradation in p- and n-Czochralski Silicon Wafers with Tabula Rasa: Preprint

We report on the bulk properties of of n- and p-type Czochralski silicon (Cz-Si) after a high-temperature annealing process known as Tabula Rasa (TR), which is primarily used to annihilate oxygen precipitates. We find significant differences in n- and p-type substrates as well as a strong dependence on the ambient in the resulting process induced degradation. We attribute this ambient dependence to either injection of interstitials or vacancies into the bulk during TR. Finally, we show that subsequent gettering is enhanced due to the annihilation of oxygen precipitates.

14 SOLAR ENERGY↗

IR luminescence in thermally treated silicon

Near-edge IR luminescence with peak emission at E = 1.084 eV has been studied in n- and p-type silicon samples with different contents of interstitial oxygen under excitation with a Nd: YAG laser diode. Thermal treatments of the samples demonstrated that the luminescence nearly completely disappears upon thermal treatments at T = 1050 deg. C and is partly restored in two stages in subsequent thermal treatments in the temperature range 550-800 deg. C. The temperature intervals of luminescence quenching and restoration (500-600 and 700-800 deg. C) correlate with the temperature ranges of dissolution for shallow oxygen precipitates (1000 deg. C) and the generation of oxygen-containing thermal defects, the so-called thermal donors of types I and II. The data obtained suggest that the electronic states related to thermal donors are traps for nonequilibrium carriers and the emptying of these traps contributes to the near-edge emission.

36 MATERIALS SCIENCE↗

Improving Silicon Solar Cell Efficiency Through Advanced Cell Processing, Highly Uniform Texturing, and Thinner Cells

This CRADA is aimed at developing silicon solar cell technologies that can yield higher efficiency solar cells. Specifically, this CRADA cover three technologies: (i) developing a high temperature process for dissolution of oxygen precipitates, (ii) uniform texturization of diamond wire sawn wafers, and (iii) evaluation of techniques to bond techniques thin wafers and thin films.

14 SOLAR ENERGY↗

Growth and nucleation regimes in boron doped silicon by dynamical x-ray diffraction

The oxygen precipitation of highly (17.5 mΩ cm) and moderately (4.5 Ω cm) boron (B) doped silicon (Si) crystals at 780 °C is investigated by following in-situ the evolution of diffraction Pendellösung oscillations. All samples show an initial diffusion-driven growth process which may change over into Ostwald ripening. For the highly doped sample and involving a nucleation step at 450 °C for 30 h, the precipitate density ρ is enhanced by a factor of 8 as compared to the moderately doped sample. The influence of a high B concentration on ρ is dramatically higher for the samples directly heated to 780 °C, where an enhancement factor of 80 is found. Considering Ostwald ripening as a second growth regime reveals consistent ripening rates and surface energies σ with those found at 900 °C in a previous publication.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Utilization of Tabula Rasa to Stabilize Bulk Lifetimes in n-Cz Silicon for High-Performance Solar Cell Processing

We investigate a high temperature, high cooling-rate anneal Tabula Rasa (TR) and report its implications on n-type Czochralski-grown silicon (n-Cz Si) for photovoltaic fabrication. Tabula Rasa aims at dissolving and homogenizing oxygen precipitate nuclei that can grow during the cell process steps and degrade the cell performance due to their high internal gettering and recombination activity. The Tabula Rasa thermal treatment is performed in a clean tube furnace with cooling rates >100 degrees C/s. We characterize the bulk lifetime by Sinton lifetime and photoluminescence mapping just after Tabula Rasa, and after the subsequent cell processing. After TR, the bulk lifetime surprisingly degrades to <; 0.1ms, only to recover to values equal or higher than the initial non-treated wafer (several ms), after typical high temperature cell process steps. Those include boron diffusion and oxidation; phosphorus diffusion/oxidation; ambient annealing at 850 degrees C; and crystallization annealing of tunneling-passivating contacts (doped polycrystalline silicon on 1.5 nm thermal oxide). The drastic lifetime improvement during high temperature cell processing is attributed to improved external gettering of metal impurities and annealing of intrinsic point defects. Time and injection dependent lifetime spectroscopy further reveals the mechanisms of lifetime improvement after Tabula Rasa treatment. Additionally, we report the efficacy of Tabula Rasa on n-type Cz-Si wafers and its dependence on oxygen concentration, correlated to position within the ingot.

14 SOLAR ENERGY↗

Dynamical theoretical model of the high-resolution double-crystal x-ray diffractometry of imperfect single crystals with microdefects

The dynamical diffraction model has been developed for the quantitative description of rocking curves (RCs) measured in the Bragg diffraction geometry from single crystals containing homogeneously distributed microdefects of several types and with arbitrary sizes. The analytical expressions for coherent and diffuse RC components, which take self-consistently multiple-scattering effects into account and depend explicitly on microdefect characteristics (radius, concentration, strength, etc.), have been derived with taking into account the instrumental factors. The developed model has been applied to determine the characteristics of oxygen precipitates and dislocation loops in silicon crystals grown by Czochralsky and float-zone methods using RCs measured by the high-resolution double-crystal x-ray diffractometer. It has been shown, particularly, that completely dynamical consideration of Huang as well as Stockes-Wilson diffuse scattering (DS) in both diffuse RC component and coefficient of extinction of coherent RC component due to DS, together with taking asymmetry and thermal DS effects into account, provides the possibility to distinguish contributions into RC from defects of different types, which have equal or commensurable effective radii.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhanced work hardening from oxygen-stabilized ω precipitates in an aged metastable β Ti-Nb alloy

High levels of oxygen in solid solution in Ti alloys are considered detrimental to mechanical properties because of embrittlement concerns. In metastable β titanium alloys, the formation of isothermal ω precipitates is also known to cause severe embrittlement and ductility reduction. However, oxygen has been shown to partition to the ω phase during ageing, and this partitioning behavior may potentially impact ω’s mechanical contribution. Using micropillar compression, we compared the deformation behavior of Ti-20Nb (at. %) with oxygen-stabilized ω precipitates to the behavior of oxygen-free specimens. The oxygen-stabilized microstructures showed increased compressive yield strength and enhanced work hardening behavior compared to oxygen-free specimens. In the absence of oxygen, the compressed pillars showed slip band formation and catastrophic failure, and transmission electron microscopy imaging revealed that ω precipitates were sheared within the continuous deformation channels resulting in slip localization. In contrast, oxygen-stabilized ω precipitates were harder to shear and the formation of continuous deformation channels was suppressed during compression, leading to improved work hardening behavior up to 15% strain. Furthermore, this counter-intuitive role of oxygen may offer design strategies to address the significant embrittlement and loss of ductility observed for ω-strengthened β Ti alloys without oxygen and avenues to expand the use of β Ti alloys.

36 MATERIALS SCIENCE↗

Effect of rapid thermal processing on copper precipitation in p/p{sup +} silicon epitaxial wafers with heavily boron-doped substrates

The effect of rapid thermal processing (RTP) on the formation of copper precipitation in p/p{sup +} silicon (Si) epitaxial wafers was systematically investigated by defect etching and optical microscopy. After RTP preannealing at high temperature (1250 °C/60 s, with cooling rate 30 K/s) followed by the 750 °C/8 h + 1050 °C/16 h low-high (L-H) two-step annealing, it was revealed that the bulk microdefects were found only inside the p{sup +} substrate, manifesting no defects generated in the epitaxial layer. However, it was found that the width of denude zone (DZ) in samples only subjected to L-H two-step annealing was narrower than that of epitaxial layer, which meant that oxygen precipitation was formed in epitaxial layer. It can be concluded that RTP was beneficial to the formation of DZ. Additionally, it was found that the width of DZ has a sharp dependence on the introducing temperature of copper contamination, that is, the corresponding equilibrium concentration of interstitial copper in the Si influence the thermodynamics and kinetics process of the formation of copper precipitation significantly.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Revealing the Mechanism of Light-Induced Degradation and Regeneration of p-type Cz-Si

The goal of this SIPS project was to develop advanced spectroscopic tools to explore boron- oxygen related defects in p-type Czochralski (Cz) monocrystalline Si (c-Si) to inform processing strategies to permanently suppress these defects and improve cell efficiency. Our work can be divided into three categories: (a) establishment of surface passivation and fast-firing protocols for light induced degradation (LID) and regeneration in p-Cz Si; (b) sample preparation and identification of spectral features for LID and hydrogen in c-Si with vibrational and electron spin resonance (ESR) spectroscopies; (c) demonstration of the interrelation between high-temperature thermal annealing, which breaks nuclei for oxygen precipitates in LID and regeneration. To our knowledge, this is the first study that has identified LID defects using ESR. The magnetic properties of the LID defects will be invaluable in validating the structure of the LID defects through atomistic simulations. The results generated from this project were disseminated through conference presentations and proceedings, and a peer reviewed publication. The tools developed in this project will be used to study other forms of degradation in c-Si including light and elevated-temperature induced degradation in p-type Cz Si and process induced degradation in n-type Cz Si.

14 SOLAR ENERGY↗