SEARCH · Search NASA
Results for “pH impacts”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Impact of pH on Aqueous-Phase Phenol Hydrogenation Catalyzed by Carbon-Supported Pt and Rh
In aqueous phase, the rates of hydrogenation of aromatic substrates such as phenol on Pt/C and Rh/C are influenced by varying activity of hydronium ions. Decreasing the pH from 8 to 1 increases the rate of hydrogenation of phenol on Pt at 20 bar H 2 and 80 °C by 15-fold. This increase is attributed to weakening of the hydrogen binding energy (HBE) on the metal surface with decreasing pH. A weaker HBE at lower pH is also predicted by ab initio molecular dynamics simulations, providing atomistic insight into the impact of electrolyte ion distribution and interfacial solvent reorganization on HBE. The lower HBE results in a decrease in the activation energy for addition of adsorbed H from the metal to the adsorbed organic (with a Brønsted–Evans–Polanyi slope of ~1). In conclusion, the kinetic model derived accounts also for the lack of pH dependence at low hydrogen coverages (at 1 bar H 2 on Pt or up to 70 bar H 2 on Rh), when the weakening of the HBE decreases the hydrogen coverage.
Impact of pH, Dissolved Inorganic Carbon, and Polyphosphates for the Initial Stages of Water Corrosion of Copper Surfaces Investigated by AFM and NEXAFS
Explore the source record for details and available documents.
Impact of pH and urea content on size and luminescence of upconverting Y2O3:Yb, Er nanophosphors
Highlights: • The granula size, morphology and upconversion luminescence of Y{sub 2}O{sub 3}:Yb{sup 3+}, Er{sup 3+} nanophosphors was tuned via altering the pH values and urea contents. • Steady state and transient spectroscopy along with FTIR analysis are performed to clarify the insight photophysical mechanism. • Nonradiative transition probability modulation due to the OH{sup −} group variation could be responsible for improved R/G intensity ratio. - Abstract: The pH value and urea concentration of precursor dramatically impact on the particle size, morphology and upconversion luminescence of Y{sub 2}O{sub 3}:Yb{sup 3+} , Er{sup 3+} nanophosphors. The lower pH leads to the smaller granula size of the final product, for instance, the crystalline size reduces from ∼30 nm to ∼16 nm as pH value varies from 9.3 to 6.7. The intensity of green (2H11/2, 4S3/2 → 4I15/2) and red emission (4F9/2 → 4I15/2) can be effectively and readily tuned by adjusting the pH value and urea content of precursor solution. The sample derived at pH of 6.7 and urea content of 384 mg/mL exhibits the highest red to green ratio, as a result of more surface defects and hydroxyl residues. Besides, the upconversion lifetime investigation further proved that the quenching and nonradiative relaxation from 2H11/2 and 4S3/2 to 4F9/2 caused by the surface defects could be responsible for the relative enhancement of the red emission.
A spectrophotometric study of the impact of pH and metal-to-ligand ratio on the speciation of the Pu( vi )-oxalate system
The oxalate ligand is prevalent throughout the nuclear fuel cycle. While the Pu(III)- and Pu(IV)-oxalate systems are well studied due to their use in plutonium metal and PuO 2 production, the effect of oxalate on Pu(VI) remains understudied. Absorption spectroscopy was employed to probe the solution behavior of the Pu(VI)-oxalate system as a function of pH (1, 3, 7) and metal-to-ligand ratio (M/L; 10 : 1–1 : 10). Peak changes in the UV-vis-NIR spectra were associated with the formation of multiple Pu(VI)-oxalate species with increasing oxalate concentration. Some insight into identification of species present in solution was gained from the limited Pu(VI)-oxalate literature and comparisons with the assumed isostructural U(VI)-oxalate system. A peak in the UV-vis-NIR spectrum at 839 nm, which corresponds to the formation of a 1 : 1 PuO 2 (C 2 O 4 )(aq) complex, was observed and used to determine the formation constant (log β° = 4.64 ± 0.06). A higher coordinated Pu(VI)-oxalate peak at 846 nm was tentatively assigned as the 1 : 2 complex PuO 2 (C 2 O 4 ) 2 2₋ and a preliminary formation constant was determined (log β° = 9.30 ± 0.08). In conclusion, the predominance of both complexes was shown in speciation diagrams calculated from the formation constants, illustrating the importance of considering the Pu(VI)-oxalate system in the nuclear fuel cycle.
Lithium Sorption from Simulated Geothermal Brine: Impact of pH, Temperature, and Brine Chemistry
Lithium sorption information from experiments. Data includes the effects of pH, temperature and brine chemistry on the sorption of Lithium from a simulated geothermal brine. The sorbent used in the experiments is "hydrothermally produced, Spinel-LiMn2O4". The sorbent was produced by Carus Corporation.
Carbonate Minerals and Dissimilatory Iron-Reducing Organisms Trigger Synergistic Abiotic and Biotic Chain Reactions under Elevated CO 2 Concentration
Increasing CO 2 emission has resulted in pressing climate and environmental issues. While abiotic and biotic processes mediating the fate of CO 2 have been studied separately, their interactions and combined effects have been poorly understood. To explore this knowledge gap, an iron-reducing organism, Orenia metallireducens, was cultured under 18 conditions that systematically varied in headspace CO 2 concentrations, ferric oxide loading, and dolomite (CaMg(CO 3 ) 2 ) availability. The results showed that abiotic and biotic processes interactively mediate CO 2 acidification and sequestration through "chain reactions", with pH being the dominant variable. Specifically, dolomite alleviated CO 2 stress on microbial activity, possibly via pH control that transforms the inhibitory CO 2 to the more benign bicarbonate species. The microbial iron reduction further impacted pH via the competition between proton (H + ) consumption during iron reduction and H + generation from oxidization of the organic substrate. Under Fe(III)-rich conditions, microbial iron reduction increased pH, driving dissolved CO 2 to form bicarbonate. Spectroscopic and microscopic analyses showed enhanced formation of siderite (FeCO 3 ) under elevated CO 2 , supporting its incorporation into solids. In conclusion, the results of these CO 2 -microbe-mineral experiments provide insights into the synergistic abiotic and biotic processes that alleviate CO 2 acidification and favor its sequestration, which can be instructive for practical applications (e.g., acidification remediation, CO 2 sequestration, and modeling of carbon flux).
Effect of annealing temperature and pH on morphology and optical property of highly dispersible ZnO nanoparticles
Highly dispersible zinc oxide nanoparticles were produced in large quantity via a simple solution method. The effect of temperature and pH impact on as-prepared ZnO nanoparticles with respect to the morphological and optical characteristics has been investigated. The average particle size of ZnO nanoparticles increased with increasing annealing temperature. A sharp UV band-edge emission was observed in as-prepared ZnO nanoparticles with negligibly less intense deep level emission. However, upon annealing at high temperature in air, UV band-edge emission disappears with an evolution of a broad deep level emission in photoluminescence spectra. Similarly, by adjusting the pH of reaction medium from 4 to pH = 8 using ammonium hydroxide solution, particle size gets bigger and bigger leads to red-shift in UV band-edge emission and an appearance of deep level emission peak. At pH = 8, well resolved sharp X-ray diffraction peaks were observed with lower FWHM values due to higher crystallite sizes.
Leaching characteristics of toxic constituents from coal fly ash mixed soils under the influence of pH
Highlights: • The impact of pH on the leaching of elements and metals from fly ash mixed soils. • Generally Ca, Cd, Mg, and Sr follows a cationic leaching pattern. • The leaching of As and Se shows an oxyanionic leaching pattern. • The leaching behavior of elements does not change based on material type. • Different fly ash types show different abilities in immobilizing trace elements. - Abstract: Leaching behaviors of Arsenic (As), Barium (Ba), Calcium (Ca), Cadmium (Cd), Magnesium (Mg), Selenium (Se), and Strontium (Sr) from soil alone, coal fly ash alone, and soil-coal fly ash mixtures, were studied at a pH range of 2–14 via pH-dependent leaching tests. Seven different types of soils and coal fly ashes were tested. Results of this study indicated that Ca, Cd, Mg, and Sr showed cationic leaching pattern while As and Se generally follows an oxyanionic leaching pattern. On the other hand, leaching of Ba presented amphoteric-like leaching pattern but less pH-dependent. In spite of different types and composition of soil and coal fly ash investigated, the study reveals the similarity in leaching behavior as a function of pH for a given element from soil, coal fly ash, and soil-coal fly ash mixtures. The similarity is most likely due to similar controlling mechanisms (e.g., solubility, sorption, and solid-solution formation) and similar controlling factors (e.g., leachate pH and redox conditions). This offers the opportunity to transfer knowledge of coal fly ash that has been extensively characterized and studied to soil stabilized with coal fly ash. It is speculated that unburned carbon in off-specification coal fly ashes may provide sorption sites for Cd resulting in a reduction in concentration of these elements in leachate from soil-coal fly ash mixture. Class C fly ash provides sufficient CaO to initiate the pozzolanic reaction yielding hydrated cement products that oxyanions, including As and Se, can be incorporated into.
Multimodal study of the impact of stimulation pH on shale pore structure, with an emphasis on organics behavior in alkaline environments
The tight nature of shale formations calls for hydraulic fracturing techniques able of altering the pore architecture to facilitate the production of hydrocarbon resources. The composition, pH, salinity, density and chemistry of Hydraulic Fracturing Fluids (HFF) vary substantially depending on reservoir characteristics. pH is among the most important stimulation fluid properties, ranging from very acidic, for carbonate reservoirs, to basic, in the case of clay-rich formations. pH regulates what geochemical reactions take place between the stimulation fluid and shale, as well as pore architecture alteration. The dissolution of carbonates and pyrite, and the precipitation of common minerals such as barite, gypsum and iron oxides in acidic environments have been extensively documented. In contrast, alkali stimulation environments and the role of organic components have received less attention. This research provides insight into the role of both minerals and organic components during alkaline stimulation, and the resulting pore architecture alterations. Here, a set of reactive experiments are performed using three different shales, with varying organic matter (OM) content, at different pH (3, 6, 8, 10, 12). The analysis of pore architecture alteration induced by the reaction was performed via nitrogen (N2) gas adsorption and Time-Domain Nuclear Magnetic Resonance (TD-NMR). Inductively Coupled Plasma - Optical Emission Spectrometry (ICP-OES) was used to measure the composition of the stimulation fluid post-reaction. The system with a larger impact on the pore architecture (pH 12) underwent a more extensive analysis through the application of Focused Ion Beam Scanning Electron Microscopy (FIB-SEM) and x-ray Diffraction (XRD). Results show that mineral dissolution contributed to the creation of secondary porosity, mainly through dissolution of clays and silicates. We show that the abundance and distribution of organic matter both play a significant role in changes in pore architecture. Most samples showed an increase in inter-organic porosity, likely due to the organic acids within kerogen reacting with the stimulation fluid. Samples with a larger amount and more widespread distribution of organic matter show the most significant alterations. Finally, we also highlight the dissolution process of iron-rich minerals, including framboidal pyrite, as another important source of secondary porosity.
Environmental impact of solution pH on the formation and migration of iron colloids in deep subsurface energy systems
Deep subsurface stimulation processes often promote fluid-rock interactions that can lead to the formation of small colloidal particles that are suspected to migrate through the rock matrix, partially or fully clog pores and microfractures, and promote the mobilization of contaminants. Thus, the goal of this work is to understand the geochemical changes of the host rock in response to reservoir stimulation that promote the formation and migration of colloids. Two different carbonate-rich shales were exposed to different solution pHs (pH = 2 and 7). In this study, iron and other mineral transformations at the shale-fluid interface were first characterized by synchrotron-based XRF mapping. Then, colloids that were able to migrate from the shale into the bulk fluid were characterized by synchrotron-based extended X-ray absorption structure (EXAFS), scanning electron microscopy (SEM), and single-particle inductively coupled plasma time-of-flight mass spectrometry (sp-icpTOF-MS). When exposed to the pH = 2 solution, extensive mineral dissolution and secondary precipitation was observed; iron-(oxyhydr)oxide colloids colocated with silicates were observed by SEM at the fluid-shale interfaces, and the mobilization of chromium and nickel with these iron colloids into the bulk fluid was detected by sp-icpTOF-MS. Iron EXAFS spectra of the solution at the shale-fluid interface suggests the rapid (within minutes) formation of ferrihydrite-like nanoparticles. Thus, we demonstrate that the pH neutralization promotes the mobilization of existing silicate minerals and the rapid formation of new iron colloids. These Fe colloids have the potential to migrate through the shale matrix and mobilize other heavy metals (such as Cr and Ni, in this study) and impacting groundwater quality, as well produced waters from these hydraulic fracturing operations.
Impact of acidic pH on plant cell wall polysaccharide structure and dynamics: insights into the mechanism of acid growth in plants from solid-state NMR
Acidification of plant primary cell walls causes cell wall expansion and plant growth. To understand how acidic pH affects the molecular structure and dynamics of wall polysaccharides, we have now characterized and compared Arabidopsis thaliana primary cell walls in neutral (pH 6.8) and acidic (pH 4.0) conditions using solid-state NMR spectroscopy. Quantitative 13C solid-state NMR spectra indicate that the pH 4.0 cell wall has neutral galacturonic acid residues in homogalacturonan (HG) and rhamnogalacturonan (RG). 13C INEPT spectra, which selectively detect highly dynamic polymers, indicate that some of the HG and RG chains in the interfibrillar region have become more dynamic in the acidic wall compared to the neutral cell wall, whereas other chains have become more rigid. Consistent with this increased dynamic heterogeneity, C–H dipolar couplings and 2D 13C–13C correlation spectra indicate that some of the HG backbones are partially aggregated in the acidic cell wall. Moreover, 2D correlation spectra measured with long mixing times indicate that the acidic cell wall has weaker cellulose–pectin interactions, and water-polysaccharide 1H spin diffusion data show that cellulose microfibrils are better hydrated at low pH. Taken together, these results indicate a cascade of chemical and conformational changes of wall polysaccharides due to cell wall acidification. These changes start with neutralization of the pectic polysaccharides, which disrupts calcium crosslinking of HG, causes partial aggregation of the interfibrillar HG, weakens cellulose–pectin interactions, and increases the hydration of both cellulose microfibrils and matrix polysaccharides. These molecular-level structural and dynamical changes are expected to facilitate polysaccharide slippage, which underlies cell wall loosening and expansion, and may occur both independent of and as a consequence of protein-mediated wall loosening.
Interrogating organo-mineral interactions by Py-GC/MS and ToF-SIMS
Soil organic matter (SOM) is crucial to soil fertility and agricultural sustainability in the face of climate change, and organo-mineral interactions are a key mechanism for stabilizing SOM. The stability of mineral-associated organic matter (MAOM) can be approximated by the strength of bonds between biomolecules and mineral surfaces. We hypothesized that factors such as mineral reactivity and solution pH would impact bonding strength. To test these factors, sorption isotherms were performed on minerals differing in particle size, morphology, and reactivity (quartz, goethite, gibbsite, kaolinite, montmorillonite), under two pH conditions (4 and 6), and across a range of tannic acid concentration (0-1400 ppm). The quantity and quality of organo-mineral bonds was assessed by quantifying post-sorption solution compounds using an absorbance plate reader and assessing the thermal energy needed to break bonds using evolved gas analysis (EGA) on a pyrolysis gas chromatograph-mass spectrometer (Py-GC/MS). Organo-mineral surfaces were also interrogated using Time-of-flight secondary ion mass spectrometry (ToF-SIMS). Sorption experiments revealed an asymptotic relationship between sorbed tannic acid and increasing initial concentrations which suggests our concentration range saturated available mineral surfaces. Results indicated that mineral identity, chiefly surface area and native pH, impacted the amount of compound sorbed to mineral surfaces. Evolved gas analyses of organo-mineral samples uncovered increased thermal stability of sorbed compounds compared to our tannic acid standard particularly on the iron oxide, goethite. ToF-SIMS revealed that goethite surface ions were covered by increasing concentrations of adsorbed tannic acid with the replacement of chlorine and sulfate ions by tannic acid related ions. Our results indicate that Py-GC/MS and ToF-SIMS are useful techniques to determine the nature and strength of organo-mineral bonds and are steppingstones to understanding controls on carbon sequestration in terrestrial systems.
Impacts of glass composition, pH, and temperature on glass forward dissolution rate
Nuclear waste glasses dissolve at the forward dissolution rate (r f ) in very dilute aqueous solutions, which can isolate the impact of the glass composition from solution feedback and alteration product effects. While it has long been known that pH and temperature (T) strongly impact r f , the impacts of glass composition have remained uncertain. In this work, r f data from 19 nuclear waste glasses were used with the aim of identifying the effect of glass composition on r f . The r f values were modeled as: r f = k 0 10 –ηpH exp(-E a /RT), with k 0 , η, E a , and R, respectively, being the intrinsic rate constant, pH coefficient, apparent activation energy, and gas constant. However, no predictive correlation could be established between the individual model parameters (log[k 0 ], η, and E a ) and glass composition for the glasses considered in this study, an outcome that was attributed to the strong positive correlation between the log[$k_0$] and E a parameters. Therefore, a model was fitted directly to the combined r f from all 19 glasses. This approach showed that 90% of the variation in r f data could be accounted for solely by T and pH effects. Therefore, any composition effects must be relatively small. After normalizing for differences in pH and T, the only notable differences in r f between the glasses were found to correlate with variations in the fraction of glass forming tetrahedra contributed by tetrahedral boron, $f$([ 4 ]B), with an abrupt threshold at a high value of $f$([ 4 ]B) (~0.22), where higher r f are predicted with no discernable composition effects below the threshold.
Electron-impact study of the PH radical using the R-matrix method
The PH radical is an interesting case to study because of its {pi}{sup 2} electronic configuration, which leads to the three low-lying electronic states, X {sup 3{Sigma}-}, a {sup 1{Delta}}, and b {sup 1{Sigma}+}. The singlet states possess long lifetimes, because direct combination with the ground state is not allowed. This is similar to the O{sub 2} case. The R-matrix method is employed to calculate elastic differential and integral cross sections, momentum-transfer cross sections, and inelastic cross sections. The energy range is 0-10 eV. The Hartree-Fock ground-state configuration of PH is 1{sigma}{sup 2}2{sigma}{sup 2}3{sigma}{sup 2}1{pi}{sup 4}4{sigma}{sup 2}5{sigma}{sup 2}2{pi}{sup 2}. We have included thirty-seven target states in the trial wave function of the scattering system in our best model. Each target state is represented by a configuration interaction (CI) wave function. In our CI model, we freeze ten electrons in orbitals 1{sigma}, 2{sigma}, 3{sigma}, and 1{pi}; the remaining six electrons are free to move among the seven orbitals 4{sigma}, 5{sigma}, 6{sigma}, 7{sigma}, 8{sigma}, 2{pi}, and 3{pi}. Our CI model yields a dipole moment of 0.67 D at the equilibrium PH bond length, R{sub e}, of 2.687 a{sub 0}; this dipole moment compares favorably with the experimental value 0.70 D. We have carried our scattering calculations in one state with the CI wave function and thirty-seven-state model. We have detected a stable anionic bound state {sup 2}B{sub 1} of PH at various bond lengths of PH molecule. The vertical electron affinity value is 0.97 eV, which is in excellent agreement with experimental value of 1.00 eV. We have included up to g partial waves in the scattering calculations. The contribution of higher partial waves is accounted for by using a Born-closure procedure.
Impact of aqueous solution pH on network structure of corrosion–induced surface layers of boroaluminosilicate glass
Understanding of the long-term stability of vitrified nuclear waste glass is critical to its safe storage, but knowledge gaps remain regarding the corrosion mechanism, especially with respect to surface alteration layers whose presence changes the observed corrosion rates. Here, we report the aqueous corrosion of a model boroaluminosilicate glass at ground water relevant pHs as investigated by vibrational spectroscopy to understand the network structure of the alteration layer that we hypothesize controls the corrosion rates. Both specular reflection infrared spectroscopy and infrared variable angle spectroscopic ellipsometry were used to elucidate details of the structure of the alteration layers formed at pH 7 and pH 9. After 2312 days, the thickness of the alteration layer is found to be ~2000 nm for corrosion at pH 7 and ~300 nm for corrosion at pH 9. Here, the interpretation of the vibrational spectra suggests that alteration layers formed at pH 7 and pH 9 both exhibit a porous network with "silica-like" structures, but with differences in the bond lengths and bond angles in the glass network. Moreover, the relative abundance of the hydrous species within the porous network appears to be dependent on pH. Additionally, the spectroscopic data suggest that the B and Ca trapped in the alteration layer during the secondary corrosion of the pH 9 pre-corroded sample in pH 3 solution are hydrated within the nano-porous layer and not bound to the silicate network. However, the precise chemical form remains to be determined. Based on these findings, we propose that the combination of the network structure of the alteration layer and the relative abundance of hydrous species within the alteration layer act to control the transport of ionic species dissolved from the reaction front to the aqueous solution outside the glass.