Search NASA⌕ Search

SEARCH · Search NASA

Results for “packet analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

TCP Packet Trace Analysis

Examination of a trace of packets collected from the network is often the only method available for diagnosing protocol performance problems in computer networks. This thesis explores the use of packet traces to diagnose performance problems of the transport protocol TCP. Unfortunately, manual examination of these traces can be so tedious that effective analysis is not possible. The primary contribution of this thesis is a graphical method of displaying the packet trace which greatly reduce, the tediousness of examining a packet trace. The graphical method is demonstrated by the examination of some packet traces of typical TCP connections. The performance of two different implementations of TCP sending data across a particular network path is compared. Traces many thousands of packets long are used to demonstrate how effectively the graphical method simplifies examination of long complicated traces. In the comparison of the two TCP implementations, the burstiness of the TCP transmitter appeared to be related to the achieved throughput. A method of quantifying this burstiness is presented and its possible relevance to understanding the performance of TCP is discussed.

Shepard, Timothy J.↗

Throughput and packet delay analysis for the H-network - CSMA/CD with adaptive and nonadaptive backoff protocols

The structure of a high-data-rate (about 7 Mbytes/sec) local area network named the H-Network is described which is used to provide point to point analysis and broadcast communication in a multiprocessor environment, the Homogeneous Multiprocessor (Dimopoulos, 1983). The throughput and packet delay characteristics for the H-Network operating under CSMA/CD are presented, using adaptive and nonadaptive backoff protocols. The network is found to perform quite well, with an average utilization factor of over 60 percent and a maximum packet delay of less than 500 microsec for the case of 10 competing stations.

Dimopoulos, Nikitas J.↗

Software Development and Testing Support for the Avionics Systems Telemetry Tool Suite

The Customer Avionics Interface Development and Analysis (CAIDA) team provides modeling and simulation software for the verification of the Launch Control System (LCS). In late 2015, CAIDA began development of the Data Exchange Message (DEM) Generator (DEMGen) and development of the DEM Modifier (DEMMod) in early 2017. DEMGen is able to mimic the telemetry streams normally sent by different simulators allowing increased user control and more telemetry instances. DEMMod takes in a telemetry stream and allows the modification of entire packets or simple measurement values. Together, these tools provide the capabilities to simulate and test complex launch scenarios to ensure LCS is fully prepared for any anomalous behavior during an actual launch. In early 2018, CAIDA began a new project called the CAIDA Advanced Telemetry Tool (CATT), which combined the code and documentation of DEMGen and DEMMod. CATT now allows the integration of new tools into a singular program providing compact and easy access. In the fall of 2018, the author worked with another intern, Antonio Negron, to develop several new CATT features along with proper documentation and unit testing. In the following spring, the author continued that work by integrating the features into CATT, solidifying the documentation, and expanding the testing to cover more cases. The outcome of both semesters includes an inspection engine for automated packet analysis, a packet-masking feature, and a multi-measurement sequencing feature.

Thomas, Taylor Walter↗

Design of a microprocessor based packet switch

The design of a packet switch incorporating a minicomputer to control and process data packets in a communications system has been reported. This paper proposes a design which uses a 6500 series microprocessor to realize the functions of a message switch in order to evaluate the viability of microprocessors in this application. The proposed design realizes the functions of header analysis, packet security, error control and line prioritization. The system hardware and software are presented together with a brief description of operation.

Carville, D. E.↗

Securing Inverter Communication: Proactive Intrusion Detection and Mitigation System to Tap, Analyze, and Act

The electric grid has undergone rapid, revolutionary changes in recent years; from the addition of advanced smart technologies to the growing penetration of distributed energy resources (DERs) to increased interconnectivity and communications. However, these added communications, access interfaces, and third-party software to enable autonomous control schemes and interconnectivity also expand the attack surface of the grid. To address the gap of DER cybersecurity and secure the grid-edge to motivate a holistic, defense-in-depth approach, a proactive intrusion detection and mitigation system (PIDMS) device was developed to secure PV smart inverter communications. The PIDMS was developed as a distributed, flexible bump-in-the-wire (BITW) solution for protecting PV smart inverter communications. Both cyber (network traffic) and physical (power system measurements) are processed using network intrusion monitoring tools and custom machinelearning algorithms for deep packet analysis and cyber-physical event correlation. The PIDMS not only detects abnormal events but also deploys mitigations to limit or eliminate system impact; the PIDMS communicates with peer PIDMSs at different locations using the MQTT protocol for increased situational awareness and alerting. The details of the PIDMS methodology and prototype development are detailed in this report as well as the evaluation results within a cyber-physical emulation environment and subsequent industry feedback.

14 SOLAR ENERGY↗

Testing Fractal Methods on Observed and Simulated Solar Magnetograms

The term "magnetic complexity" has not been sufficiently quantified. To accomplish this, we must understand the relationship between the observed magnetic field of solar active regions and fractal dimension measurements. Using data from the Marshall Space Flight Center's vector magnetograph ranging from December 1991 to July 2001, we compare the results of several methods of calculating a fractal dimension, e.g., Hurst coefficient, the Higuchi method, power spectrum, and 2-D Wavelet Packet Analysis. In addition, we apply these methods to synthetic data, beginning with representations of very simple dipole regions, ending with regions that are magnetically complex.

Adams, M.↗

Rigid format alter packets for the analysis of electromagnetic field problems

The computer program NASTRAN is used to solve electromagnetic field problems. The diffusion equation and the boundary conditions valid for problems of these kinds together with a replacing potential energy function are given. The extent to which an analogy with finite element displacement and temperature approaches holds is indicated. The outputting of complex quantities is made possible after adjustment of standard rigid format 1 input data blocks to module SDR2. The applications made involve the study of the proximity effect in a system of three parallel conductors and the analysis of the magnetic field in the vicinity of the points of contact in circuit breakers.

Spreeuw, E.↗

An approximate analysis of delay for fixed and variable length packets in an unslotted ALOHA channel

In this paper we compute the mean delay for an unslotted ALOHA random access channel for both fixed and variable length packets. The analysis is based on the concept of a user cycle and obtains steady state results. When the channel is 'stable', the results seem quite accurate. The input parameters to the model are the number of users, the mean think time, and mean retransmission time. The model yields total traffic, throughput and delay but only the latter is emphasized here. Because of the steady state nature of the analysis, no information is obtained on stability. The results are verified by simulation.

Ferguson, M. J.↗

Full Duplex, Spread Spectrum Radio System

The goal of this project was to support the development of a full duplex, spread spectrum voice communications system. The assembly and testing of a prototype system consisting of a Harris PRISM spread spectrum radio, a TMS320C54x signal processing development board and a Zilog Z80180 microprocessor was underway at the start of this project. The efforts under this project were the development of multiple access schemes, analysis of full duplex voice feedback delays, and the development and analysis of forward error correction (FEC) algorithms. The multiple access analysis involved the selection between code division multiple access (CDMA), frequency division multiple access (FDMA) and time division multiple access (TDMA). Full duplex voice feedback analysis involved the analysis of packet size and delays associated with full loop voice feedback for confirmation of radio system performance. FEC analysis included studies of the performance under the expected burst error scenario with the relatively short packet lengths, and analysis of implementation in the TMS320C54x digital signal processor. When the capabilities and the limitations of the components used were considered, the multiple access scheme chosen was a combination TDMA/FDMA scheme that will provide up to eight users on each of three separate frequencies. Packets to and from each user will consist of 16 samples at a rate of 8,000 samples per second for a total of 2 ms of voice information. The resulting voice feedback delay will therefore be 4 - 6 ms. The most practical FEC algorithm for implementation was a convolutional code with a Viterbi decoder. Interleaving of the bits of each packet will be required to offset the effects of burst errors.

Harvey, Bruce A.↗

Program Models A Laser Beam Focused In An Aerosol Spray

Monte Carlo analysis performed on packets of light. Program for Analysis of Laser Beam Focused Within Aerosol Spray (FLSPRY) developed for theoretical analysis of propagation of laser pulse optically focused within aerosol spray. Applied for example, to analyze laser ignition arrangement in which focused laser pulse used to ignite liquid aerosol fuel spray. Scattering and absorption of laser light by individual aerosol droplets evaluated by use of electromagnetic Lorenz-Mie theory. Written in FORTRAN 77 for both UNIX-based computers and DEC VAX-series computers. VAX version of program (LEW-16051). UNIX version (LEW-16065).

Barton, J. P.↗

Nonresonant coherent amplitude transfer in attosecond four-wave-mixing spectroscopy

Attosecond four-wave mixing (FWM) spectroscopy using an extreme ultraviolet (XUV) pulse and two noncollinear near-infrared (NIR) pulses is employed to measure Rydberg wave packet dynamics resulting from XUV excitation of a 3s electron in atomic argon into a series of autoionizing 3s –1 np Rydberg states ~29 eV. The emitted signals from individual Rydberg states exhibit oscillatory structure and persist well beyond the expected lifetimes of the emitting Rydberg states. These results reflect substantial contributions of longer-lived Rydberg states to the FWM emission signals of each individually detected state. A wave packet decomposition analysis reveals that coherent amplitude transfer occurs predominantly from photoexcited 3s –1 (n + 1) p states to the observed 3s –1 np Rydberg states. The experimental observations are reproduced by time-dependent Schrödinger equation simulations using electronic structure and transition moment calculations. Finally, the theory highlights that coherent amplitude transfer is driven nonresonantly to the 3s –1 np states by the NIR light through 3s –1 (n + 1)s and 3s –1 (n – 1)d dark states during the FWM process.

74 ATOMIC AND MOLECULAR PHYSICS↗

An Overview of the Usefulness of Machine Learning Techniques on Network Packet Data

Understanding the health and behavior of a computer network allows for better network efficiency and security. We present an overview of various machine learning techniques for classifying network packet data via packet metadata. While some classical machine learning approaches achieve reasonable results, the most accurate classification can be achieved with deep learning. On the four data sets studied herein, a basic deep learning model achieved at or near 100\% classification accuracy. We also propose a method for determining variable importance as a means for potential transfer learning applications to classifying yet unseen network packet data.

97 MATHEMATICS AND COMPUTING↗

Simultaneous Observation of Ion-scale Wave Packets with Opposite Polarizations and Their Implications on the Generation Region in the Inner Heliosphere

This paper reports a dispersion analysis of two wave packets simultaneously observed near the local proton gyrofrequency by the Parker Solar Probe. The observed wave event exhibits clear two-banded wave packets both propagating along the magnetic field, characterized by left-handed (L-mode) and right-handed (R-mode) polarizations simultaneously. By incorporating the Doppler shift effect into a linear dispersion analysis, we find two possible scenarios that explain these simultaneous opposite polarizations: (1) Two inherently L-mode waves in the plasma frame, propagate parallel and antiparallel to the solar wind velocity, with similar wave frequencies and wave numbers. The polarization of the antiparallel propagating wave reverses as it moves sunward in the plasma frame while still comoving with the solar wind in the stationary frame. This reversal manifests the polarization of the wave as an R-mode in the spacecraft frame. (2) Simultaneous L-mode and R-mode waves propagate parallel to the solar wind velocity, with different wave frequencies and wave numbers. Concurrent proton observations during the wave event reveal a dominant anisotropic ($T$⟂/$T$ ∥ > 1) core distribution with a drifting beam population. Estimation of the linear growth rate for both L-mode and R-mode waves suggests that both scenarios are plausible, indicating that the observation is near the wave-generation region. We explore the potential impact of these simultaneous waves on solar wind heating and scattering effects, hypothesizing that such waves might enhance efficiency compared to waves with a single wave packet, contingent upon the statistical significance of such waves.

79 ASTRONOMY AND ASTROPHYSICS↗

Phase Coupling in Langmuir Wave Packets: Evidence for Four Wave Interactions in Solar Type III Radio Bursts

The four wave interaction process, known as the oscillating two stream instability (OTSI) is considered as one of the mechanisms responsible for stabilizing the electron beams associated with solar type III radio bursts. It has been reported that (1) an intense localized Langmuir wave packet associated with a type III burst contains the spectral characteristics of the OTSI: (a) a resonant peak at the local electron plasma frequency, f(sub pe), (b) a Stokes peak at a frequency slightly lower than f(sub pe), (c) anti-Stokes peak at a frequency slightly higher than f(sub pe), and (d) a low frequency enhancement below a few hundred Hz, (2) the frequencies and wave numbers of these spectral components satisfy the resonance conditions of the OTSI, and (3) the peak intensity of the wave packet is well above the thresholds for the OTSI as well as spatial collapse of envelope solitons. Here, for the first time, applying the trispectral analysis on this wave packet, we show that the tricoherence, which measures the degree of coherent four-wave coupling amongst the observed spectral components exhibits a peak. This provides an additional evidence for the OTSI and related spatial collapse of Langmuir envelope solitons in type III burst sources.

Thejappa, G.↗

A Simulated Spectrum of Convectively Generated Gravity Waves: Propagation from the Tropopause to the Mesopause and Effects on the Middle Atmosphere

This work evaluates the interaction of a simulated spectrum of convectively generated gravity waves with realistic middle atmosphere mean winds. The wave spectrum is derived from the nonlinear convection model described by Alexander et al. that simulated a two-dimensional midlatitude squall line. This spectrum becomes input to a linear ray tracing model for evaluation of wave propagation as a function of height through climatological background wind and buoyancy frequency profiles. The energy defined by the spectrum as a function of wavenumber and frequency is distributed spatially and temporally into wave packets for the purpose of estimating wave amplitudes at the lower boundary of the ray tracing model. A wavelet analysis provides an estimate of these wave packet widths in space and time. Without this redistribution of energies into wave packets the Fourier analysis alone inaccurately assumes the energy is evenly distributed throughout the storm model domain. The growth with height of wave amplitudes is derived from wave action flux conservation coupled to a convective instability saturation condition. Mean flow accelerations and wave energy dissipation profiles are derived from this analysis and compared to parameterized estimates of gravity wave forcing, providing a measure of the importance of the storm source to global gravity wave forcing. The results suggest that a single large convective storm system like the simulated squall line could provide a significant fraction of the zonal mean gravity wave forcing at some levels, particularly in the mesosphere. The vertical distributions of mean flow acceleration and energy dissipation do not much resemble the parameterized profiles in form because of the peculiarities of the spectral properties of the waves from the storm source. The ray tracing model developed herein provides a tool for examining the role of convectively generated waves in middle atmosphere physics.

Alexander, Joan↗

A Simulated Spectrum of Convectively Generated Gravity Waves: Propagation from the Tropopause to the Mesopause and Effects on the Middle Atmosphere

This work evaluates the interaction of a simulated spectrum of convectively generated gravity waves with realistic middle atmosphere mean winds. The wave spectrum is derived from the nonlinear convection model described by Alexander et al. [1995] that simulated a two-dimensional midlatitude squall line. This spectrum becomes input to a linear ray tracing model for evaluation of wave propagation as a function of height through climatological background wind and buoyancy frequency profiles. The energy defined by the spectrum as a function of wavenumber and frequency is distributed spatially and temporally into wave packets for the purpose of estimating wave amplitudes at the lower boundary of the ray tracing model. A wavelet analysis provides an estimate of these wave packet widths in space and time. Without this redistribution of energies into wave packets the Fourier analysis alone inaccurately assumes the energy is evenly distributed throughout the storm model domain. The growth with height of wave amplitudes is derived from wave action flux conservation coupled to a convective instability saturation condition. Mean flow accelerations and wave energy dissipation profiles are derived from this analysis and compared to parameterized estimates of gravity wave forcing, providing a measure of the importance of the storm source to global gravity wave forcing. The results suggest that a single large convective storm system like the simulated squall line could provide a significant fraction of the zonal mean gravity wave forcing at some levels, particularly in the mesosphere. The vertical distributions of mean flow acceleration and energy dissipation do not much resemble the parameterized profiles in form because of the peculiarities of the spectral properties of the waves from the storm source. The ray tracing model developed herein provides a tool for examining the role of convectively generated waves in middle atmosphere physics.

Alexander, M. Joan↗

Vulcan-Forge: Architecture and Design of a Multi-Modal Forensic Analysis Plugin for CALDERA

Forge and VULCAN together describe an open-architecture cybersecurity analysis ecosystem that unifies forensic artifact processing, detection engineering, and vulnerability intelligence within integrated platforms. Forge operates as a plugin for MITRE CALDERA, ingesting diverse evidence formats—including EVTX, PCAP/PCAPNG, CSV, JSON, YAML, XML, binaries, and archives—to construct a unified artifact graph enriched with severity scoring, TLP classification, and audit trails. It provides subsystems for artifact parsing, streaming structured-data visualization, NetworkMiner-based packet inspection, PE/.NET binary analysis, and LLM-assisted triage and rule generation, with outputs validated against CCCS-YARA and pySigma schemas. VULCAN complements this by serving as a cybersecurity analyst platform that integrates a Neo4j knowledge graph, Qdrant vector retrieval, SSVC-based triage, and a local LLM to deliver CVE intelligence and forensic analysis through a multi-source ingest pipeline drawing from NVD, CISA KEV, EPSS, MITRE ATT&CK, and CAPEC. Together, they bridge structured threat intelligence with automated forensic analysis and detection workflows.

97 MATHEMATICS AND COMPUTING↗

Phase Coupling Between Spectral Components of Collapsing Langmuir Solitons in Solar Type III Radio Bursts

We present the high time resolution observations of one of the Langmuir wave packets obtained in the source region of a solar type III radio burst. This wave packet satisfies the threshold condition of the supersonic modulational instability, as well as the criterion of a collapsing Langmuir soliton, i.e., the spatial scale derived from its peak intensity is less than that derived from its short time scale. The spectrum of t his wave packet contains an intense spectral peak at local electron plasma frequency, f(sub pe) and relatively weaker peaks at 2f(sub pe) and 3f(sub pe). We apply the wavelet based bispectral analysis technique on this wave packet and compute the bicoherence between its spectral components. It is found that the bicoherence exhibits two peaks at (approximately f(sub pe), approximately f(sub pe)) and (approximately f(sub pe) approximately 2f(sub pe)), which strongly suggest that the spectral peak at 2f(sub pe) probably corresponds to the second harmonic radio emission, generated as a result of the merging of antiparallel propagating Langmuir waves trapped in the collapsing Langmuir soliton, and, the spectral peak at 3f(sub pe) probably corresponds to the third harmonic radio emission, generated as a result of merging of a trapped Langmuir wave and a second harmonic electromagnetic wave.

Thejappa, G.↗