Search NASA⌕ Search

SEARCH · Search NASA

Results for “paraffin fuel”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Effects of Critical Compression Ratio on Rating Gasoline Knock Propensity

It is common practice in the automotive industry to explore the knock limits of fuels on an engine by a comparison of the knock limited spark advance (KLSA) at threshold knock intensity. However, the knock propensity of gasolines can be rated by changing one of three metrics on a variable compression ratio Cooperative Fuels Research (CFR) octane rating engine while holding the other two variables constant: knock intensity, spark timing, and critical compression ratio. The operational differences between the standard research octane number (RON) rating and modern engine operation have been explored in three parts. The first part focused on the effects of lambda and knock characterization. The second part studied the effects of spark timing. This third part explores the knock ratings of several gasolines by comparing the critical compression ratios at constant combustion phasing and knock intensity. The threshold knock intensity was based on the standard octane rating D1 pickup or by maximum amplitude of pressure oscillations (MAPO) measured by a piezoelectric cylinder pressure transducer. Several Fuels for Advanced Combustion Engines (FACE) gasolines, primary reference fuels (PRFs), and toluene standardization fuels (TSFs) were tested on a CFR octane rating engine with advanced data acquisition equipment and a piezoelectric cylinder pressure transducer. These tests deviated from the ASTM D2699 standard octane rating procedure. For each test fuel, the CFR engine was operated at stoichiometry at a constant combustion phasing (CA50) and the compression ratio was modified until a threshold knock intensity was realized. It was found that the chemical composition of the fuels affected the relationship of critical compression ratios between the D1 knockmeter and piezoelectric pressure transducer knock intensity thresholds, as well as the measured combustion maximum pressure rise rate and spark timing setting for constant CA50. For highly aromatic fuels tested at a constant MAPO knock intensity threshold, it was found that the maximum pressure rise rate was two to three times higher than that of highly paraffinic fuels with similar RON and the spark advance was several crank angle degrees less for constant combustion phasing.

Kolodziej, Christopher P↗
DOE OSTI2023

Effects of knock intensity measurement technique and fuel chemical composition on the research octane number (RON) of FACE gasolines: Part 2 – Effects of spark timing

The Research and Motor Octane Number (RON, MON) characterize a fuel’s knock resistance by rating the knock intensity of a sample fuel relative to that of Primary Reference Fuels (PRF) in a Cooperative Fuel Research (CFR) Engine. A fuel’s octane number is regulated to prevent damage from autoignition leading to knocking combustion in spark-ignition engines. The operational differences between the standard RON rating and modern engine operation are explored in a three-part publication series. The previous study focused on the effects of lambda and knock characterization. This second study primarily focuses on the effects of spark timing on RON determination. Following the findings from the first publication, the knock intensity was captured by the knockmeter and by the maximum amplitude of pressure oscillations (MAPO) at the lambda of peak knock intensity and stoichiometry. Knock-limited spark advance tests were conducted for a set of seven Fuels for Advanced Combustion Engines (FACE) from the Coordinating Research Council (CRC) with varying chemical composition, PRFs, and Toluene Standardization Fuels (TSFs). For retarded spark timings, pre-spark low-temperature heat release was found for low RON PRFs. Low RON PRFs also showed knocking characteristics before reaching the center of combustion suggesting that the use of knock-limited spark advance (KLSA) was preferred over the knock-limited combustion phasing. Primarily paraffinic fuels tended towards increased pressure oscillations while dominantly aromatic fuels experienced higher pressure rise rates. A MAPO-based KLSA correlated best to Octane Index at a negative K-factor suggesting beyond RON operation despite being at otherwise RON conditions. At stoichiometry, the MAPO-based KLSA did neither correlate to RON nor Octane Index. Finally, good agreement was found between KLSA-based effective RON from this study to the MAPO-based effective RON from the first study.

10 SYNTHETIC FUELS↗
DOE OSTI2020

Effects of fuel composition and octane sensitivity on polycyclic aromatic hydrocarbon and soot emissions of gasoline–ethanol blend surrogates

The sooting propensity of a fuel is closely coupled with the fuel composition and chemistry. A detailed understanding of their effects is, therefore, needed to develop next-generation fuels which can minimize particulate emissions. With this overarching goal, the present work numerically investigates the effects of fuel composition and octane sensitivity (S) on polycyclic aromatic hydrocarbons (PAH) and soot emissions, for four-component gasoline-ethanol blend surrogates comprising isooctane, n-heptane, toluene, and ethanol. A partially-premixed counterflow flame is chosen as the canonical configuration for this study and simulations are performed using CHEMKIN-Pro-employing a kinetic mechanism developed by Park et al. (2017). In addition, a, detailed soot model based on the sectional method is used to capture the spatial characteristics of soot emissions. The kinetic mechanism and soot model are validated using available experimental data for various targets. A total of 86 TPRF-E mixtures, spanning a wide range of concentration of each component, and a wide range of S are analyzed. The effect of each non-paraffinic fuel component on the resultant PAH and soot emissions is investigated. PAH and soot emissions are found to vary significantly depending upon the blend composition. Additionally, based on the parametric sweeps, a regression analysis is carried out to identify global parameters that govern the formation of PAHs and soot. The analysis shows that both toluene content and S have a prominent effect on the formation of PAHs and soot, with toluene content having a stronger impact. Moreover, larger PAHs have higher dependency on toluene content and S. Furthermore, a detailed analysis is carried out to understand the physical and chemical phenomena associated with the observed trends of PAH and soot emissions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Oxidation of an iso-paraffinic alcohol-to-jet fuel and n-heptane mixture: an experimental and modelling study

Oxidation of ATJ/n-heptane blends was studied over a wide range of test conditions, using single pulse shock tubes. Test conditions were designed to study the effect of pressure (4 and 50 bar), and fuel loading (~100-1400 ppm) on the oxidation of the blends across a wide range of temperatures (800-1300 K). These effects were observed by measuring concentrations of intermediate species formed using in-line Gas Chromatography (GC) and GCxGC TOF-MS. Results showed that increasing the initial fuel load does not have a significant impact on the results. However, increasing the pressure shifts the mixture reactivity to a lower temperature by about 150 K and causes the fuel to be oxidized instead of decomposing pyrolytically as at lower pressures. Additional experiments for pure ATJ and pure n-heptane were performed at conditions matching the ATJ/n-heptane 50 bar experiments to analyze the differences between the pure and mixed fuels. Speciation measurements were compared against predictions from a detailed kinetic model. The ability of the kinetic model to capture the effects of varying experimental test conditions on the evolution of intermediate species is discussed and kinetic analyses have been conducted to identify the important reaction pathways.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

A transported Livengood-Wu integral model for knock prediction in CFD simulation

This work describes the development of a transported Livengood-Wu (L-W) integral model for computational fluid dynamics (CFD) simulation to predict auto-ignition and engine knock tendency. The currently employed L-W integral model considers both single-stage and two-stage ignition processes, thus can be generally applied to different fuels such as paraffin, olefin, aromatics and alcohol. The model implementation is first validated in simulations of homogeneous charge compression ignition combustion for three different fuels, showing good accuracy in prediction of auto-ignition timing for fuels with either single-stage or two-stage ignition characteristics. Then, the L-W integral model is coupled with G-equation model to indicate end-gas auto-ignition and knock tendency in CFD simulations of a direct injection spark ignition engine. This modeling approach is about 10 times more efficient than the ones that based on detailed chemistry calculation and pressure oscillation analysis. Two fuels with same Research Octane Number (RON) but different octane sensitivity are studied, namely Co-Optima Alkylate and Co-Optima E30. Feed-forward neural network model in conjunction with multi-variable minimization technique is used to generate fuel surrogates with targets of matched RON, octane sensitivity and ethanol content. The CFD model is validated against experimental data in terms of pressure traces and heat release rate for both fuels under a wide range of operating conditions. The knock tendency indicated by the fuel energy contained in the auto-ignited region of the two fuels at different load conditions correlates well with the experimental results and the fuel octane sensitivity, implying the current knock modeling approach can capture the octane sensitivity effect and can be applied to further investigation on composition of octane sensitivity.

Yue, Zongyu↗
DOE OSTI2021

A Transported Livengood–Wu Integral Model for Knock Prediction in Computational Fluid Dynamics Simulation

This work describes the development of a transported Livengood–Wu (L–W) integral model for computational fluid dynamics (CFD) simulation to predict autoignition and engine knock tendency. The currently employed L–W integral model considers both single-stage and two-stage ignition processes, thus can be generally applied to different fuels such as paraffin, olefin, aromatics, and alcohol. The model implementation is first validated in simulations of homogeneous charge compression ignition (HCCI) combustion for three different fuels, showing good accuracy in prediction of autoignition timing for fuels with either single-stage or two-stage ignition characteristics. Then, the L–W integral model is coupled with G-equation model to indicate end-gas autoignition and knock tendency in CFD simulations of a direct-injection spark-ignition engine. This modeling approach is about 10 times more efficient than the ones that based on detailed chemistry calculation and pressure oscillation analysis. Two fuels with same Research Octane Number (RON) but different octane sensitivity are studied, namely, Co-Optima alkylate and Co-Optima E30. Feed-forward neural network model in conjunction with multivariable minimization technique is used to generate fuel surrogates with targets of matched RON, octane sensitivity, and ethanol content. The CFD model is validated against experimental data in terms of pressure traces and heat release rate for both fuels under a wide range of operating conditions. The knock tendency—indicated by the fuel energy contained in the autoignited region—of the two fuels at different load conditions correlates well with the experimental results and the fuel octane sensitivity, implying the current knock modeling approach can capture the octane sensitivity effect and can be applied to further investigation on composition of octane sensitivity.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2022

Catalyst design to direct high-octane gasoline fuel properties for improved engine efficiency

The paraffin-to-olefin (P/O) ratio in gasoline fuel is a critical metric affecting fuel properties and engine efficiency. In the conversion of dimethyl ether (DME) to high-octane hydrocarbons over BEA zeolite catalysts, the P/O ratio can be controlled through catalyst design. Here, we report bimetallic catalysts that balance the net hydrogenation and dehydrogenation activity during DME homologation. The Cu-Zn/BEA catalyst exhibited greater relative dehydrogenation activity attributed to higher ionic site density, resulting in a lower P/O ratio (6.6) versus the benchmark Cu/BEA (9.4). The Cu-Ni/BEA catalyst exhibited increased hydrogenation due to reduced Ni species, resulting in a higher P/O ratio (19). The product fuel properties were estimated with an efficiency merit function and compared against finished gasolines and a typical alkylate blendstock. Merit values for the hydrocarbon product from all three BEA catalysts exceeded those of the comparison fuels (0–5.3), with the product from Cu-Zn/BEA exhibiting the highest merit value (9.7).

Catalyst design↗
DOE OSTI2020

Octane Modeling of Isobutanol Blending into Gasoline

Thirty-four gasoline blendstocks for oxygenate blending were used to create finished gasoline blends with isobutanol content of 12.5 volume percent (vol. %) and 16 vol. %. The gasoline blendstocks and finished fuels were analyzed for octane number (research [RON] and motor [MON]) to determine the effect of blending isobutanol. Volumetric and molar linear blending models were developed to predict finished fuel RON and MON, starting from the properties and composition of the gasoline blendstocks and isobutanol. Results show the molar blending model provided a better fit for the experimental data than the volumetric blending model. The volumetric model was further improved by adding nonlinear terms, improving the error to within ~1 ON. Gasoline blendstock properties impacted the finished fuel RON/MON, with paraffins having a synergistic effect with isobutanol and olefins and aromatics having an antagonistic effect.

10 SYNTHETIC FUELS↗
DOE OSTI2024

Co-hydrotreatment of Bio-oil and Waste Cooking Oil to Produce Transportation Fuels

This paper reports the co-hydrotreatment of the heavy bio-oil fraction with waste cooking oil (WCO) using NiMo/γ-Al 2 O 3 catalyst, followed by the distillation of resulting deoxygenated oil and the characterization of resulting fuel cuts. The heavy BTG bio-oil fraction was obtained by removing the very reactive light-oxygenated compounds via rotary evaporation, subsequently mixed with 1-butanol. The resulting oil was blended with WCO and subjected to a two-step co-hydrotreatment process. The first step, called “stabilization,” is aimed at saturating highly reactive hydrogen-deficient compounds. The second step, called “deoxygenation,” aimed to remove bio-oil oxygen, primarily as H 2 O. This study examined the impact of varying bio-oil concentrations (0, 10, 20, 30, 40 wt.% of WCO) on the upgraded oil's yield, composition, and fuel properties. The resulting hydrotreated oil was distilled into gasoline-range, kerosene-range, and diesel-range hydrocarbons at <150 °C, 150 to 250 °C, and 250 to 350 °C, respectively. The yield of the hydrotreated oil indicates that as the bio-oil concentration increases, the amounts of coke (0.7 to 2.4 %) and water (2 to 10 wt. %) increase while the organic layer yields decrease (80 to 63 %). The coke yield was comparable to the coke yield obtained when co-processing the pyrolytic lignin fraction. This suggests that coke is formed from both the sugar oligomers and the lignin-derived oligomers. The UV-fluorescence analysis on the hydrotreated oil shows that more polycondensed and conjugated ring compounds formed as the bio-oil concentration is increased. These compounds are precursors of coke. FTIR results showed that most raw materials were converted to biofuels after the hydrotreatment. To achieve less than 1 wt. % of coke yield, blends with up to 20 wt. % pyrolysis oil should be used. An increase in bio-oil concentration leads to a slight increase in gasoline yield and a decrease in kerosene and diesel yields. The identified carbon species found in the fuel cuts include n-paraffin, iso-paraffin, cycloparaffin, and aromatics. Further, the jet fuel cut (kerosene) was characterized by density, surface tension, and viscosity. Our product conforms to the standard specifications for sustainable aviation fuels (Jet A-1). Further research is suggested to fine-tune the operating parameters for achieving reduced coke yield and enhanced kerosene yield.

09 BIOMASS FUELS↗
DOE OSTI2021

VFA Biorefinery Design for Informed Production of Ground and Aviation Fuels

The rising demand for low-carbon intensity fuel options requires evaluation of a system which can support their production economically and sustainably. Volatile fatty acids (VFAs) ranging from C2 to C8 can be derived in high yield from arrested anaerobic digestion of biomass. This talk provides an overview of our work in which we upgrade wet waste-derived VFAs using ketonization to elongate their carbon backbone to reach a range relevant to jet or diesel fuels. Kinetic models were used to predict ketone profiles from varying VFA profiles, thereby informing potential carbon flow to either (a) mixed paraffins for use in diesel or aviation fuel, or (b) ethers for use in diesel fuel. To do this, the anticipated products were screened for critical fuel characteristics using predictive tools. The criteria for neat and blended bioblendstocks were chosen based on conventional petrofuel requirements, and they were applied to inform fuel targets, identify limiting characteristics, and guide conversion development. While paraffins can serve as either diesel or aviation fuels, the latter has stringent criteria which include a precise distillation curve range tied to carbon distribution. Fuels which fall outside this range typically fail to meet other property metrics, and as such flashpoint and viscosity were identified as potentially limiting properties of this VFA aviation fuel. However, paraffin fractions which fall outside aviation criteria may meet diesel fuel requirements, which are looser except for the flashpoint minimum. Flashpoint was also a concern for smaller VFA diesel ethers, which posed an additional oxygenate risk of high water solubility. This fuel-informed conversion design process was demonstrated through production of paraffins with reduced sooting as compared to petrodiesel (~34%), and increased renewable aviation fuel blend levels (>70%). VFA-derived ethers improved petrodiesel by increasing fuel autoignition quality by 56% and reducing sooting by 86%. These VFA aviation and diesel fuels could enable greenhouse gas (GHG) reductions of over 165% and 50%, respectively, relative to their purely fossil-derived counterparts. Collectively, this work provides (i) an overview of how we leveraged the flexibility of VFAs for fuel production; and (ii) insight into the potential of a VFA biorefinery to accommodate varied feed and fuel applications, while also considering the merit of tailored fuel production pathways and GHG reduction potential.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2024

Production of a Sustainable Aviation Fuel Additive from Waste Polystyrene

Sustainable aviation fuels (SAFs) are an important lever to achieving net zero CO 2 emissions in aviation. Fuel quality standards limit the blend volume of nonpetroleum-based jet fuel such as synthetic paraffinic kerosene (SPK) in Jet A to 50 vol %. One reason for this limit is the limited seal-swelling ability of SPK. Ethylbenzene (EB) as an additive can improve the swelling propensity of SPK. In this study, EB was produced through polystyrene pyrolysis, hydrogenation, and separation. The thermal pyrolysis of polystyrene produced a styrene-rich pyrolyzate. The pyrolyzate was hydrogenated by using Pd/C to produce an EB-rich mixture that yielded a crude EB of ∼90% purity on distillation. The O-ring swelling ability of crude EB of ∼90% purity was tested as a 12 and 16 vol % blend with SPK. Results reveal that EB addition enhanced seal swelling, but a more refined EB grade would be preferable. The results provide a pathway to address the twin issues of plastic pollution and SPK property improvement.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2020

Cool flame chemistry of diesel surrogate compounds: n -Decane, 2-methylnonane, 2,7-dimethyloctane, and n -butylcyclohexane

Elucidating the formation of combustion intermediates is crucial to validate reaction pathways, develop reaction mechanisms and examine kinetic modeling predictions. While high-temperature pyrolysis and oxidation intermediates of alkanes have been thoroughly studied, comprehensive analysis of cool flame intermediates from alkane autoxidation is lacking and challenging due to the complexity of intermediate species produced. Here, jet-stirred reactor autoxidation of four C 10 alkanes: n -decane, 2-methylnonane, 2,7-dimethyloctane, and n -butylcyclohexane, as model compounds of diesel fuel, was investigated from 500 to 630 K using synchrotron vacuum ultraviolet photoionization molecular beam mass spectrometry (SVUV-PIMS). Around 100 intermediates were detected for each fuel. The classes of molecular structures present during the autoxidation of the representative paraffinic functional groups in transport fuels, i.e., n -alkanes, branched alkanes, and cycloalkanes were established and were found to be similar from the oxidation of various alkanes. A theoretical approach was applied to estimate the photoionization cross sections of the intermediates with the same carbon skeleton as the reactants, e.g., alkene, alkenyl keto, cyclic ether, dione, keto-hydroperoxide, diketo-hydroperoxide, and keto-dihydroperoxide. These species are indicators of the first, second, and third O 2 addition reactions for the four C 10 hydrocarbons, as well as bimolecular reactions involving keto-hydroperoxides. Chemical kinetic models for the oxidation of these four fuels were examined by comparison against mole fraction of the reactants and final products obtained in additional experiments using gas chromatography analysis, as well as the detailed species pool and mole fractions of aforementioned seven types of intermediates measured by SVUV-PIMS. This works reveals that the models in the literature need to be improved, not only the prediction of the fuel reactivity and final products, but also the reaction network to predict the formation of many previous undetected intermediates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Process Intensification for Direct Conversion of Biomass-Based Syngas to High Octane Gasoline

The conversion of lignocellulosic-derived carbon sources via the creation of a CO2 rich syngas stream provides means to produce liquid hydrocarbon fuels, with advancements intended to create a cost-competitive method of sequential conversion via methanol and dimethyl ether intermediates. Previously developed methods with Cu/Beta zeolites enabled the conversion of dimethyl ether to linear and branched hydrocarbons, with high selectivities towards products with high-octane fuel properties. Through process intensification, use of a single reactor to convert syngas to methanol and DME, then further to hydrocarbons, allows for reduced capitol and operation cost for the same chemistries that typically use 3 reactors instead of one. Utilization of commercially available methanol synthesis catalyst (Megamax 800, Clariant, CZA) and methanol dehydration catalyst with the Cu/Beta catalyst allowed for conversion into hydrocarbon products in this single reactor set up. Reactor configuration with CZA and alumina catalysts mixed with or stacked in a bed physically above the Cu/Beta catalyst provided a system for the direct conversion of the syngas to hydrocarbons with improved yields and selectivities with higher net C1 conversions for stacked bed configurations. Through control of the process conditions, greater conversion of C1 oxygenate intermediates (i.e., methanol and dimethyl ether) was achieved with concomitant increase in selectivities towards gasoline and jet fuel range olefin and paraffin products. Lower hydrocarbon number products and less naphthenes were observed for the conversion of syngas compared to DME conversion on only the Cu/Beta system with prominent selectivities observed for C4, C5, and C7 hydrocarbons. The DME and methanol formation rates, with understanding of the equilibria for both processes, were determined as important factors to allow for improved performance of the Cu/Beta. Determination of the factors which allow for tuning of selectivities and yields created an intensified process which allows for a "market-responsive" biorefinery design, which can produce high octane gasoline or jet fuel range hydrocarbons to meet demands for a more sustainable route to liquid fuels.

BIOMASS FUELS↗
DOE OSTI2024

Lignin Deoxygenation for the Production of Sustainable Aviation Fuel Blendstocks

Lignin is an abundant source of renewable aromatics that has long been targeted for valorization. Traditionally, the inherent heterogeneity and reactivity of lignin has relegated it to direct combustion, but its higher energy density compared with polysaccharides makes it an ideal candidate for biofuel production. This Review critically assesses lignin's potential as a substrate for sustainable aviation fuel blendstocks. Lignin can generate the necessary cyclic compounds for a fully renewable, sustainable aviation fuel when integrated with current paraffinic blends and can meet the current demand 2.5 times over. Using an energy-centric analysis, we show that lignin conversion technologies have the near-term potential to match the enthalpic yields of existing commercial sustainable aviation fuel production processes. Key factors influencing the viability of technologies for converting lignin to sustainable aviation fuel include lignin structure, delignification extent, depolymerization performance, and the development of stable and tunable deoxygenation catalysts.

09 BIOMASS FUELS↗
DOE OSTI2022

Detailed Compositional Comparison of Hydrogenated Vegetable Oil with Several Diesel Fuels and Their Effects on Engine-Out Emissions

The Coordinating Research Council (CRC) is actively involved in developing and applying advanced analytical techniques to the chemical characterization of transportation fuels. Here, this article complements a 2017 CRC project to quantify and compare the effects of a commercially available renewable diesel fuel (hydrotreated vegetable oil [HVO]) and an ultralow sulfur diesel (ULSD) fuel on engine-out gaseous and particulate matter (PM) emissions from a light-duty vehicle. Results showed that the combustion of HVO fuel had an advantage over ULSD in terms of lowering engine-out emissions (THC, CO, NO x , etc.). Furthermore, this advantage is strongly related to the fuel composition. This article summarizes the results of advanced and comprehensive analytical tests on the same ULSD and HVO fuels and attempts to connect some of the engine-out emissions results to fuel composition and specific chemical structures. A variety of test methods, generally unavailable in combination, were employed, such as one-dimensional (1D) and two-dimensional (2D) gas chromatography (GC), nuclear magnetic resonance spectroscopy (NMR), and high-pressure solid-liquid phase transition experiments. In summary, the ULSD sample was found to have representation across the expected set of hydrocarbon classes typical for the sample type. Interestingly, a high content of cycloparaffins (>50 wt%) and a very low content of diaromatics (~2 wt%) were present. While not without precedent, these are higher and lower, respectively, than typically found for commercial ULSD compositions. In contrast, HVO was found to consist of only two hydrocarbon classes: n-paraffins (~10 wt%) and iso-paraffins (~90 wt%), both predominantly in a narrow carbon atom number range (i.e., C14–C18). HVO engine-out emissions results for the LA-92 and steady-state testing can be tracked to the narrow carbon atom number range of the n-paraffins and iso-paraffins, which result in a high cetane number fuel having a narrow distillation range. Previously, the low-temperature operability of HVO has been a concern, but that appears not be the case for this particular HVO. HVO and ULSD were evaluated at pressures up to ~275 MPa and found to have comparable solid-liquid equilibria despite significant compositional differences.

09 BIOMASS FUELS↗
DOE OSTI2021

Interfacial thermal conductance between multi-layer graphene sheets and solid/liquid octadecane: A molecular dynamics study

Mixtures of paraffin and carbon nanofillers have promising potential for thermal storage, as paraffin (the matrix) possesses high latent heat and the nanofillers compensate for the low thermal conductivity (TC) of paraffin. Understanding thermal transport in these materials is essential for practical applications, as weak thermal transport hinders fast charge/discharge of thermal energy. Here, we use non-equilibrium molecular dynamics (NEMD) simulations to study the interfacial thermal conductance (ITC) between graphene sheets and octadecane (C18H38) matrix under the limiting conditions of the sheets being parallel or perpendicular to the direction of the imposed heat flux. The findings show that the systems containing thin graphene layers exhibit higher values of ITC. This study captures the asymptotic saturation of thermal conductance for the liquid phase of the perpendicular structure. Besides, given the greater number of structured layers of paraffin upon phase change, the ITC for the solid paraffin-graphene system is higher than the conductance of the liquid paraffin-graphene interface. We use the Pearson correlation coefficients of the vibrational power spectrum (VPS) of interfacing materials to explain the orders of magnitude variations of the observed ITC.

25 ENERGY STORAGE↗
DOE OSTI2025

Sustainable Graphite and Jet Fuel from Biorefinery Residue

Abstract Battery‐grade graphite and aviation fuel are traditionally produced from non‐renewable, fossil carbon feedstocks and result in substantial greenhouse gas emissions. Biomass holds exciting potential as a renewable and sustainable feedstock for the production of graphite and aviation fuel, but challenges exist including the necessity of a catalyst when producing graphite and low selectivity when producing aviation fuel. A process to convert a biomass‐derived feedstock into graphite without the use of a catalyst and fuels with high selectivity towards sustainable aviation fuel (SAF) is innovated. Heavy bio‐oil undergoes a conversion process similar to the commercial production of synthetic graphite including coking at 500 °C, calcination at 1000 °C, and graphitization at 2800 °C. The resulting biographite exhibits excellent performance in lithium‐ion battery configurations with specific capacity of ~330 mAh g −1 and a 96.8 % capacity rebound after high rate cycling. The liquid hydrocarbon co‐product from coking is suitable for hydrotreating into SAF. The aviation fuel fraction (70 wt % of the fuel produced) meets ASTM standards and is composed primarily of cycloalkanes (~80 wt %) which improves energy density compared to paraffins produced by other SAF pathways and may replace aromatics for elastomer swelling in traditional jet fuel with less soot production.

09 BIOMASS FUELS↗
DOE OSTI2022

A scalable compressible volume of fluid solver using a stratified flow model

Here, in this paper, a Volume of Fluid method which uses a Stratified Flow model for flux calculation is proposed to solve a compressible multiphase flow in a way that has high parallel efficiency. The solver is part of an open-source computing tool to study fuel entrainment and combustion in the application of paraffin-based hybrid rocket motors. This paper focuses on the compressible Volume of Fluid solver for the liquid and gaseous phases in this environment. This solver uses perfect gas and stiffened gas models for equation of state, with the ability to easily add other models as desired. Additionally a comparison of a Riemann solver versus an AUSM+up scheme is conducted, showing improvement with the later in the solution of multiphase flows. This solver successfully reproduces shock tube cases with the expected accuracy, as well as simulating two-dimensional shear and gravity-driven flows. Results also show that the code is able to utilize a Stratified Flow model to evaluate shear flow without the need for interface reconstruction or gradient calculations. Finally, it is shown that the solver has near-ideal scaling under strong scaling tests as well as good performance in static scaling, giving improved performance over current options and implying future advancement of high-performance computing efficiency for multiphase flow solvers.

97 MATHEMATICS AND COMPUTING↗