Search NASA⌕ Search

SEARCH · Search NASA

Results for “parallel streamlines”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Modulated stagnation-point flow and steady streaming

Plane stagnation-point flow is modulated in the free stream so that the velocity components are proportional to K(H) + K cos omega t. Similarity solutions of the Navier-Stokes equations are examined using high-frequency asymptotics for K and K(H) of unit order. Special attention is focused on the steady streaming generated in this flow with strongly non-parallel streamlines.

Merchant, Gregory J.↗

A note on secondary flow in rotating radial channels

A general vector differential equation for the vorticity component parallel to a streamline is derived for steady, nonviscous, and incompressible flow in a rotating system. This equation is then simplified by restricting it to rotating radial channels and by making further simplifying assumptions. The simplified equation is used to solve for the secondary vorticity, the vorticity component parallel to the streamline, in three special cases involving different streamtube geometries; the results are presented in a series of figures. The secondary vorticity is shown to decrease with decreased absolute angular velocity of the fluid, decreased inlet total-pressure gradient, decreased length of relative flow path, and increased relative velocity.

Kramer, James J↗

Unsteady supersonic aerodynamic theory for interfering surfaces by the method of potential gradient

A generalized solution of the hyperbolic wave equation was further developed to relate the velocity components at a field point to the potential gradient distribution in the dependence domain. Singular integrals were evaluated in closed form, with numerical integration methods for more complex but analytic functions. Idealization of the lifting surfaces by trapezoidal elements with two sides parallel to the streamlines is computationally efficient. Streamwise integrals were performed analytically, and spanwise integrals were neccessary only on element leading and trailing sides. All integrands vanish on the Mach cone. Pressure distribution on a double delta wing and generalized aerodynamic coefficients for three AGARD planforms were calculated and compared with available results.

Jones, W. P.↗

Unsteady supersonic aerodynamic theory by the method of potential gradient

A generalized solution of the hyperbolic wave equation has been derived. The method used has been further developed to relate the velocity components at a field point to the potential gradient distribution in the dependence domain. Singular integrals have been evaluated in closed form, while numerical integration methods are suggested for treating more complex but analytic functions. Idealization of the lifting surfaces by trapezoidal elements with two sides parallel to the streamlines is computationally efficient because line integrations along the other two sides need only be considered. Furthermore, all the integrands vanish on the Mach cone and the need for determining the hyperbolic curves of intersection of the cone with the lifting surface is avoided. Generalized aerodynamic coefficients for three AGARD planforms have been calculated and compared with the available results.

Jones, W. P.↗

Two-Dimensional Potential Flow Past an Ordinary Thick Wing Profile

This report deals with the development of a method which gives a lucid and convenient solution of the flow conditions in the vicinity of a common, thick airfoil section wherein the thickness of the profile is taken into account. The method consists in making the airfoil the streamline in a parallel flow by disposing on its mean line certain source and vortex distributions the fields of which are superposed on the parallel flow. These distributions of singularities are secured for the generalized Karman-Trefftz profile by means of conformal transformation from the flow about a circle. Five different distribution functions are afforded for the density of superposition, which combine in a specified manner to the necessary distributions of singularity and represent a generalized Karman-Trefftz profile in parallel flow. For these profiles the speed for each of the five distributions is then computed independently of the angle of attack.

Keune, F.↗

On the Transition from Two-Dimensional to Three-Dimensional MHD Turbulence

We report a theoretical investigation of the robustness of two-dimensional inviscid MHD flows at low magnetic Reynolds numbers with respect to three-dimensional perturbations. We analyze three model problems, namely flow in the interior of a triaxial ellipsoid, an unbounded vortex with elliptical streamlines, and a vortex sheet parallel to the magnetic field. We demonstrate that motion perpendicular to the magnetic field with elliptical streamlines becomes unstable with respect to the elliptical instability once the velocity has reached a critical magnitude whose value tends to zero as the eccentricity of the streamlines becomes large. Furthermore, vortex sheets parallel to the magnetic field, which are unstable for any velocity and any magnetic field, are found to emit eddies with vorticity perpendicular to the magnetic field and with an aspect ratio proportional to N(sup 1/2). The results suggest that purely two-dimensional motion without Joule energy dissipation is a singular type of flow which does not represent the asymptotic behaviour of three-dimensional MHD turbulence in the limit of infinitely strong magnetic fields.

Thess, A.↗

A finite element analysis of the exact nonlinear formulation of a lifting surface in steady incompressible flow, with the evaluation of the correct wake geometry

The problem of steady incompressible flow for lifting surfaces is considered. An integral equation is solved relating the values of the potential discontinuity on the lifting surface and its wake to the values of the normal derivative of the potential which are known from the boundary conditions. The lifting surface and the wake are divided into small quadrilateral surface elements. The values of the potential discontinuity and the normal derivative of the potential are assumed to be constant within each lifting surface element and equal to their values at the centroids of the lifting surface elements. This yields a set of linear algebraic equations. An iteration procedure is used to obtain the wake geometry: the velocities at the corner points of the wake elements are calculated and the wake streamlines are aligned to be parallel to the velocity vector. The procedure is repeated until convergence is attained.

Suciu, E. O.↗

Parallel Eclipse Project Checkout

Parallel Eclipse Project Checkout (PEPC) is a program written to leverage parallelism and to automate the checkout process of plug-ins created in Eclipse RCP (Rich Client Platform). Eclipse plug-ins can be aggregated in a feature project. This innovation digests a feature description (xml file) and automatically checks out all of the plug-ins listed in the feature. This resolves the issue of manually checking out each plug-in required to work on the project. To minimize the amount of time necessary to checkout the plug-ins, this program makes the plug-in checkouts parallel. After parsing the feature, a request to checkout for each plug-in in the feature has been inserted. These requests are handled by a thread pool with a configurable number of threads. By checking out the plug-ins in parallel, the checkout process is streamlined before getting started on the project. For instance, projects that took 30 minutes to checkout now take less than 5 minutes. The effect is especially clear on a Mac, which has a network monitor displaying the bandwidth use. When running the client from a developer s home, the checkout process now saturates the bandwidth in order to get all the plug-ins checked out as fast as possible. For comparison, a checkout process that ranged from 8-200 Kbps from a developer s home is now able to saturate a pipe of 1.3 Mbps, resulting in significantly faster checkouts. Eclipse IDE (integrated development environment) tries to build a project as soon as it is downloaded. As part of another optimization, this innovation programmatically tells Eclipse to stop building while checkouts are happening, which dramatically reduces lock contention and enables plug-ins to continue downloading until all of them finish. Furthermore, the software re-enables automatic building, and forces Eclipse to do a clean build once it finishes checking out all of the plug-ins. This software is fully generic and does not contain any NASA-specific code. It can be applied to any Eclipse-based repository with a similar structure. It also can apply build parameters and preferences automatically at the end of the checkout.

Crockett, Thomas M.↗

Influence of the Convection Electric Field Models on Predicted Plasmapause Positions During Magnetic Storms

In the present work, we determine how three well documented models of the magnetospheric electric field, and two different mechanisms proposed for the formation of the plasmapause influence the radial distance, the shape and the evolution of the plasmapause during the geomagnetic storms of 28 October 2001 and of 17 April 2002. The convection electric field models considered are: Mcllwain's E51) electric field model, Volland-Stern's model and Weimer's statistical model compiled from low-Earth orbit satellite data. The mechanisms for the formation of the plasmapause to be tested are: (i) the MHD theory where the plasmapause should correspond to the last-closed- equipotential (LCE) or last-closed-streamline (LCS), if the E-field distribution is stationary or time-dependent respectively; (ii) the interchange mechanism where the plasmapause corresponds to streamlines tangent to a Zero-Parallel-Force surface where the field-aligned plasma distribution becomes convectively unstable during enhancements of the E-field intensity in the nightside local time sector. The results of the different time dependent simulations are compared with concomitant EUV observations when available. The plasmatails or plumes observed after both selected geomagnetic storms are predicted in all simulations and for all E-field models. However, their shapes are quite different depending on the E-field models and the mechanisms that are used. Despite the partial success of the simulations to reproduce plumes during magnetic storms and substorms, there remains a long way to go before the detailed structures observed in the EUV observations during periods of geomagnetic activity can be accounted for very precisely by the existing E-field models. Furthermore, it cannot be excluded that the mechanisms currently identified to explain the formation of "Carpenter's knee" during substorm events, will', have to be revised or complemented in the cases of geomagnetic storms.

Pierrard, V.↗

RANS-MP: A Portable Parallel Navier-Stokes Solver

RANS-MP, a new implementation of a single-grid Navier-Stokes solver using the diagonalized Beam-Warming approximate-factorization scheme, is presented. This first release of the completely rewritten solver employs the following optimizations: (1) Bi-directional multi-partition method for the ADI solver part; this improves granularity and load balance; (2) Improved cache usage through elimination of non-unit-stride array access (possible in part due to multi-partitioning); (3) Preprocessing of communicating boundary conditions to streamline logic during time stepping; (4) Truly parallel, high-performance I/O using the newly-developed MPI-IO library; (5) Elimination of large amounts of redundant operations through efficient use of workspace. Results of some realistic wing computations on the IBM SP2 computer will be presented. We will demonstrate that excellent absolute performance and scalability are obtained with RANS-MP, even for relatively small grid sizes. Besides high performance, an outstanding feature of RANS-MP is its true portability, due to the use of the portable message passing and I/O libraries MPI and MPI-IO.

VanderWijngaart, Rob F.↗

Magnetic field fluctuations in the Venus magnetosheath

Using a model for the convection pattern of the shocked solar wind flow around the Venus obstacle, Pioneer Venus observations of ultra-low-frequency (about 10-40 s period) magnetic field fluctuations in the magnetosheath have been traced along streamlines to the regions of the quasi-parallel bow shock. The periods and polarizations of the sinusoidal fluctuations are similar to those observed upstream of the quasi-parallel bow shock, where streaming superthermal particles are believed to produce MHD waves by a beam-plasma instability. The results suggest that both disturbances at the ionopause at Venus and the earth's magnetopause may be caused by convection of turbulent magnetic fields from the subsolar bow shock when the interplanetary field direction produces a quasi-parallel shock there.

Luhmann, J. G.↗

Spatial distributions of magnetic field fluctuations in the dayside magnetosheath

In a study that tests the hypothesis that magnetosheath magnetic fields are disturbed on plasma streamlines which are connected to the quasi-parallel bow shock, magnetometer observations from the ISEE 2 and IMP 8 spacecraft are used to investigate the dayside spatial distributions of fluctuating magnetosheath fields for different interplanetary field orientations. The results suggest that although other sources such as Kelvin-Helmholtz instabilities and flux transfer processes probably contribute to the fluctuations in the magnetosheath field, the quasi-parallel shock source is an important contributor in the dayside region.

Luhmann, J. G.↗

Morphometry of streamlined forms in terrestrial and Martian channels

Streamlined erosional forms in the Channeled Scabland are compared with streamline features recognized in the region of the Kasei Vallis on Mars shown in Viking imagery. The morphometric analysis considers three physical parameters, length, measured parallel to the suggested flow direction; width, taken as the maximum width of the streamlined form perpendicular to the flow direction; and area, measured with a grid placed over the surface. These parameters are used to calculate a dimensionless parameter k, defined as the square of the length multiplied by pi over four times the area. For the 137 Scabland forms studied k values range from 1.0 to 8.3 with an average of 3.2. The k values for 47 Martian streamlined forms range from 1.5 to 12.0 with an average of 3.8. The rough similarity of these results suggests that the terrestrial and Martian features were formed by similar processes. The forms appear to have developed an ideal shape, sufficiently elongated to reduce pressure drag in the fluid creating them, but not so long as to create excessive skin resistance.

Baker, V. R.↗

Real-time dynamics and control strategies for space operations of flexible structures

This project (NAG9-574) was meant to be a three-year research project. However, due to NASA's reorganizations during 1992, the project was funded only for one year. Accordingly, every effort was made to make the present final report as if the project was meant to be for one-year duration. Originally, during the first year we were planning to accomplish the following: we were to start with a three dimensional flexible manipulator beam with articulated joints and with a linear control-based controller applied at the joints; using this simple example, we were to design the software systems requirements for real-time processing, introduce the streamlining of various computational algorithms, perform the necessary reorganization of the partitioned simulation procedures, and assess the potential speed-up realization of the solution process by parallel computations. The three reports included as part of the final report address: the streamlining of various computational algorithms; the necessary reorganization of the partitioned simulation procedures, in particular the observer models; and an initial attempt of reconfiguring the flexible space structures.

Park, K. C.↗

A method for the direct determination of wing-section drag

In order that the method may be more easily understood, we will first consider the simpler case when there is no lift, but only drag, and when the streamlines at the measuring point behind the obstacle are nearly parallel. Moreover, the flow is assumed not to deviate much from the two-dimensional flow.

Betz, A↗

Coupling Advanced Modeling and Visualization to Improve High-Impact Tropical Weather Prediction

To meet the goals of extreme weather event warning, this approach couples a modeling and visualization system that integrates existing NASA technologies and improves the modeling system's parallel scalability to take advantage of petascale supercomputers. It also streamlines the data flow for fast processing and 3D visualizations, and develops visualization modules to fuse NASA satellite data.

Shen, Bo-Wen↗

An Extended Lagrangian Method

A unique formulation of describing fluid motion is presented. The method, referred to as 'extended Lagrangian method,' is interesting from both theoretical and numerical points of view. The formulation offers accuracy in numerical solution by avoiding numerical diffusion resulting from mixing of fluxes in the Eulerian description. The present method and the Arbitrary Lagrangian-Eulerian (ALE) method have a similarity in spirit-eliminating the cross-streamline numerical diffusion. For this purpose, we suggest a simple grid constraint condition and utilize an accurate discretization procedure. This grid constraint is only applied to the transverse cell face parallel to the local stream velocity, and hence our method for the steady state problems naturally reduces to the streamline-curvature method, without explicitly solving the steady stream-coordinate equations formulated a priori. Unlike the Lagrangian method proposed by Loh and Hui which is valid only for steady supersonic flows, the present method is general and capable of treating subsonic flows and supersonic flows as well as unsteady flows, simply by invoking in the same code an appropriate grid constraint suggested in this paper. The approach is found to be robust and stable. It automatically adapts to flow features without resorting to clustering, thereby maintaining rather uniform grid spacing throughout and large time step. Moreover, the method is shown to resolve multi-dimensional discontinuities with a high level of accuracy, similar to that found in one-dimensional problems.

Liou, Meng-Sing↗

Slow shocks around the sun

It is inferred from this study that magnetohydrodynamic slow shocks can exist in the vicinity of the sun. The study uses a two-hole corona model, the sub-Alfvenic streams originating from the edge of the polar open-field regions are forced to turn towards equator in coronal space following the curved boundary of the closed field region. When the streamlines from the opposite poles merge at a neutral point, their directions become parallel to the neutral sheet. An oblique slow shock can develop near or at the neutral point, the shock extends polewards to form a surface of discontinuity around the sun.

Whang, Y. C.↗