Search NASA⌕ Search

SEARCH · Search NASA

Results for “parameter correlations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2016

Comparison of Spatial Correlation Parameters between Full and Model Scale Launch Vehicles

The current vibro-acoustic analysis tools require specific spatial correlation parameters as input to define the liftoff acoustic environment experienced by the launch vehicle. Until recently these parameters have not been very well defined. A comprehensive set of spatial correlation data were obtained during a scale model acoustic test conducted in 2014. From these spatial correlation data, several parameters were calculated: the decay coefficient, the diffuse to propagating ratio, and the angle of incidence. Spatial correlation data were also collected on the EFT-1 flight of the Delta IV vehicle which launched on December 5th, 2014. A comparison of the spatial correlation parameters from full scale and model scale data will be presented.

Kenny, Jeremy↗
NASA NTRS1976

Electron parameter correlations in high-speed streams and heat flux instabilities

Statistical electron parameter correlations associated with high-speed streams are determined with the aim of identifying one or more locally active solar wind heat flux instabilities. Evidence that points toward local regulation of the heat flux at 1 AU is presented, and the results of a search for special signatures expected from the action of the Alfven, magnetosonic, and whistler flux instabilities are discussed. It is shown that under certain conditions, the whistler mode can be active in regulating the heat flux at 1 AU.

Feldman, W. C.↗
DOE OSTI2020

Physics of parameter correlations around the solar-scale enhancement in neutrino theory with unitarity violation

We discuss the physics of the three neutrino flavor transformation with non-unitary mixing matrix, with particular attention to the correlation between the $\nu$SM- and the $\alpha$ parameters which represent the effect of unitarity-violating (UV) new physics. Towards this goal, a new perturbative framework is created to illuminate the effect of non-unitarity in the region of the solar-scale enhanced oscillations. We refute the skepticism about the physical reality of the $\nu$Standard Model CP phase $\delta$–$\alpha$ parameter phase correlation by analysis with the SOL convention of $U_{{\tiny MNS}}$, in which $e^{\pm i \delta}$ is attached to $s_{12}$. Then, a comparative study between the solar- and atmospheric-scale oscillation regions allowed by the framework reveals a dynamical $\delta$–(blobs of the $\alpha$ parameters) correlation in the solar oscillation region, in sharp contrast to the “chiral”-type phase correlation $[e^{- i \delta} \bar{\alpha}_{\mu e},\ e^{- i \delta} \bar{\alpha}_{\tau e},\ \bar{\alpha}_{\tau \mu}]$ in the Particle Data Group convention seen in the atmospheric oscillation region. An explicit perturbative calculation to the first order in the $\nu_{\mu} \rightarrow \nu_{e}$ channel allows us to decompose the UV related part of the probability into the unitary evolution part and the genuine non-unitary part. We observe that the effect of non-unitarity tends to cancel between these two parts, as well as between the different $\alpha_{\beta \gamma}$ parameters.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
NASA NTRS1983

An ISEE 3 high time resolution study of interplanetary parameter correlations with magnetospheric activity

The coupling between the solar wind and the geomagnetic disturbances was examined using data from the ISEE-3 spacecraft at an earth-sun libration point and ground-based data. One minute data were used to avoid aliasing in determining the internal magnetospheric response to solar wind conditions. Attention was given to the cross-correlations between the geomagnetic index (AE), the total energy dissipation rate (UT), and the solar wind parameters, as well as the spatial and temporal scales on which the magnetosphere reacts to the solar wind conditions. It was considered necessary to characterize the physics of the solar wind-magnetosphere coupling in order to define the requirements for a spacecraft like the ISEE-3 that could be used as a real time monitoring system for predicting storms and substorms. The correlations among all but one parameter were lower during disturbance intervals; UT was highly correlated with all parameters during the disturbed times. An intrinsic 25-40 min delay was detected between interplanetary activity and magnetospheric response in quite times, diminishing to no more than 15 min during disturbed times.

Baker, D. N.↗
DOE OSTI2020

Uncertainty analysis of correlated parameters in automated reaction mechanism generation

Abstract Uncertainty analysis is a useful tool for inspecting and improving detailed kinetic mechanisms because it can identify the greatest sources of model output error. Owing to the very nonlinear relationship between kinetic and thermodynamic parameters and computed concentrations, model predictions can be extremely sensitive to uncertainties in some parameters while uncertainties in other parameters can be irrelevant. Error propagation becomes even more convoluted in automatically generated kinetic models, where input uncertainties are correlated through kinetic rate rules and thermodynamic group values. Local and global uncertainty analyses were implemented and used to analyze error propagation in Reaction Mechanism Generator (RMG), an open‐source software for generating kinetic models. A framework for automatically assigning parameter uncertainties to estimated thermodynamics and kinetics was created, enabling tracking of correlated uncertainties. Local first‐order uncertainty propagation was implemented using sensitivities computed natively within RMG. Global uncertainty analysis was implemented using adaptive Smolyak pseudospectral approximations as implemented in the MIT Uncertainty Quantification Library to efficiently compute and construct polynomial chaos expansions to approximate the dependence of outputs on a subset of uncertain inputs. Cantera was used as a backend for simulating the reactor system in the global analysis. Analyses were performed for a phenyldodecane pyrolysis model. Local and global methods demonstrated similar trends; however, many uncertainties were significantly overestimated by the local analysis. Both local and global analyses show that correlated uncertainties based on kinetic rate rules and thermochemical groups drastically reduce a model's degrees of freedom and have a large impact on the determination of the most influential input parameters. These results highlight the necessity of incorporating uncertainty analysis in the mechanism generation workflow.

Gao, Connie W.↗
DOE OSTI2025

Insights into Slip-Rate Time Functions, Rupture Parameter Correlations, and Ground Motions from Validated Multicycle Earthquake Ruptures

Earthquake strong-motion predictions using kinematic source modeling require knowledge of the slip-rate functions (SRFs) along the rupture and their distinct characteristics in asperities, background (off-asperity) areas and near the surface. Here, in this study we analyzed SRFs from well-validated, self-consistent, and fully dynamic rupture models from earthquake cycles obeying a rate-and-state friction law, from our companion study (Galvez et al., 2021). The shapes of SRFs in asperities are well described by the regularized Yoffe function (RYF), which has only two parameters: rise time T r and smoothing time T s , which control the generation of long- and short-period ground motions, respectively. In background areas, we demonstrate that, in addition to the primary rupture, multiple secondary ruptures may also nucleate from rupture heterogeneities related to asperities, resulting in SRFs with multiple peaks. Because it is impossible to fit a multiple-peak SRF by the single-peak RYF, we describe SRFs in background areas in an effective way by fitting their amplitude spectra with the RYF spectra. Such spectrally effective RYFs capture salient aspects of seismic-wave generation and can be used in rupture generators for strong motion prediction. We found that small T s values correlate with small characteristic weakening distances, large peak slip rates (PSRs), and large rupture velocities. T r values are larger in background areas and smaller in asperities. Within the shallow aseismic zone, T s values approximately quadruple whereas T r values approximately double. Because of this dominant T s increase, PSR values decrease in the near-surface zone. These features indicate that the generation of strong motions by the near-surface portions of the rupture is negligible in the studied scenarios.

Geosciences↗
NASA NTRS1974

Correlation parameters for the study of leeside heating on a lifting body at hypersonic speeds

Leeside heating was studied with the aim of gaining some insight into: (1) the magnitude of the leeside heating rates and (2) the methods to be used to extrapolate wind tunnel leeside heating rates to the full scale flight condition. This study was based on existing experimental data obtained in a hypersonic shock tunnel on lifting body configurations that are typical of shuttle orbiter vehicles. Heat transfer was first measured on the windward side to determine the boundary layer type. Then the leeside heating was investigated with the classified boundary layer. Correlation data are given on the windward turbulent boundary layer, the windward laminar boundary layer, and the leeside surfaces.

Vidal, R. J.↗
NASA NTRS1978

Correlations of catalytic combustor performance parameters

Correlations for combustion efficiency percentage drop and the minimum required adiabatic reaction temperature necessary to meet emissions goals of 13.6 g CO/kg fuel and 1.64 g HC/kg fuel are presented. Combustion efficiency was found to be a function of the cell density, cell circumference, reactor length, reference velocity, and adiabatic reaction temperature. The percentage pressure drop at an adiabatic reaction temperature of 1450 K was found to be proportional to the reference velocity to the 1.5 power and to the reactor length. It is inversely proportional to the pressure, cell hydraulic diameter, and fractional open area. The minimum required adiabatic reaction temperature was found to increase with reference velocity and decrease with cell circumference, cell density and reactor length. A catalyst factor was introduced into the correlations to account for differences between catalysts. Combustion efficiency, the percentage pressure drop, and the minimum required adiabatic reaction temperature were found to be a function of the catalyst factor. The data was from a 12 cm-diameter test rig with noble metal reactors using propane fuel at an inlet temperature of 800 K.

Bulzan, D. L.↗
NASA NTRS2017

Methods of Constructing a Blended Performance Function Suitable for Formation Flight

This paper presents two methods for constructing an approximate performance function of a desired parameter using correlated parameters. The methods are useful when real-time measurements of a desired performance function are not available to applications such as extremum-seeking control systems. The first method approximates an a priori measured or estimated desired performance function by combining real-time measurements of readily available correlated parameters. The parameters are combined using a weighting vector determined from a minimum-squares optimization to form a blended performance function. The blended performance function better matches the desired performance function mini- mum than single-measurement performance functions. The second method expands upon the first by replacing the a priori data with near-real-time measurements of the desired performance function. The resulting blended performance function weighting vector is up- dated when measurements of the desired performance function are available. Both methods are applied to data collected during formation- flight-for-drag-reduction flight experiments.

control systems↗
NASA NTRS1972

Coordinate transformation by minimizing correlations between parameters

This investigation was to determine the transformation parameters (three rotations, three translations and a scale factor) between two Cartesian coordinate systems from sets of coordinates given in both systems. The objective was the determination of well separated transformation parameters with reduced correlations between each other, a problem especially relevant when the sets of coordinates are not well distributed. The above objective is achieved by preliminarily determining the three rotational parameters and the scale factor from the respective direction cosines and chord distances (these being independent of the translation parameters) between the common points, and then computing all the seven parameters from a solution in which the rotations and the scale factor are entered as weighted constraints according to their variances and covariances obtained in the preliminary solutions. Numerical tests involving two geodetic reference systems were performed to evaluate the effectiveness of this approach.

Kumar, M.↗
NASA NTRS1994

Elevated Temperature Crack Propagation

This paper is a summary of two NASA contracts on high temperature fatigue crack propagation in metals. The first evaluated the ability of fairly simple nonlinear fracture parameters to correlate crack propagation. Hastelloy-X specimens were tested under isothermal and thermomechanical cycling at temperatures up to 980 degrees C (1800 degrees F). The most successful correlating parameter was the crack tip opening displacement derived from the J-integral. The second evaluated the ability of several path-independent integrals to correlate crack propagation behavior. Inconel 718 specimens were tested under isothermal, thermomechanical, temperature gradient, and creep conditions at temperatures up to 650 degrees C (1200 degrees F). The integrals formulated by Blackburn and by Kishimoto correlated the data reasonably well under all test conditions.

Orange, Thomas W.↗
NASA NTRS1972

Correlation of total sound power and peak sideline OASPL from jet exhausts

An empirical analysis of jet noise is made for convergent exhaust nozzles. An engineering approach to the correlation of total sound power and miximum sideline overall sound pressure level (OASPL), at 200 ft, is presented for both subsonic and supersonic jets based on available data. Data correlation for subsonic jets shows no dependency of total sound power and maximum sideline OASPL on jet density. The analysis for supersonic jets results in a correlation parameter for jet total sound power consisting of the conventional Lighthill parameter modified by considerations of jet Mach number and jet acoustic velocity. Similar parameters also correlate the maximum sideline OASPL for supersonic jets.

Vonglahn, U. H.↗
NASA NTRS1972

Correlation of total sound power and peak sideline OASPL from jet exhausts.

An empirical analysis of jet noise is made for convergent exhaust nozzles. This study, conducted at the Lewis Research Center, presents an engineering approach to the correlation of total sound power and maximum sideline OASPL (at 200 ft) for both subsonic and supersonic jets based on available data. Data correlation for subsonic jets shows no dependency of total sound power and maximum sideline OASPL on jet density. The analysis for supersonic jets results in a correlation parameter for jet total sound power consisting of the conventional Lighthill parameter modified by considerations of jet Mach number and jet acoustic velocity. Similar parameters also correlate the maximum sideline OASPL for supersonic jets.

Von Glahn, U. H.↗