Search NASA⌕ Search

SEARCH · Search NASA

Results for “parameter correlations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2016

Comparison of Spatial Correlation Parameters between Full and Model Scale Launch Vehicles

The current vibro-acoustic analysis tools require specific spatial correlation parameters as input to define the liftoff acoustic environment experienced by the launch vehicle. Until recently these parameters have not been very well defined. A comprehensive set of spatial correlation data were obtained during a scale model acoustic test conducted in 2014. From these spatial correlation data, several parameters were calculated: the decay coefficient, the diffuse to propagating ratio, and the angle of incidence. Spatial correlation data were also collected on the EFT-1 flight of the Delta IV vehicle which launched on December 5th, 2014. A comparison of the spatial correlation parameters from full scale and model scale data will be presented.

Kenny, Jeremy↗
NASA NTRS1976

Electron parameter correlations in high-speed streams and heat flux instabilities

Statistical electron parameter correlations associated with high-speed streams are determined with the aim of identifying one or more locally active solar wind heat flux instabilities. Evidence that points toward local regulation of the heat flux at 1 AU is presented, and the results of a search for special signatures expected from the action of the Alfven, magnetosonic, and whistler flux instabilities are discussed. It is shown that under certain conditions, the whistler mode can be active in regulating the heat flux at 1 AU.

Feldman, W. C.↗
NASA NTRS1983

An ISEE 3 high time resolution study of interplanetary parameter correlations with magnetospheric activity

The coupling between the solar wind and the geomagnetic disturbances was examined using data from the ISEE-3 spacecraft at an earth-sun libration point and ground-based data. One minute data were used to avoid aliasing in determining the internal magnetospheric response to solar wind conditions. Attention was given to the cross-correlations between the geomagnetic index (AE), the total energy dissipation rate (UT), and the solar wind parameters, as well as the spatial and temporal scales on which the magnetosphere reacts to the solar wind conditions. It was considered necessary to characterize the physics of the solar wind-magnetosphere coupling in order to define the requirements for a spacecraft like the ISEE-3 that could be used as a real time monitoring system for predicting storms and substorms. The correlations among all but one parameter were lower during disturbance intervals; UT was highly correlated with all parameters during the disturbed times. An intrinsic 25-40 min delay was detected between interplanetary activity and magnetospheric response in quite times, diminishing to no more than 15 min during disturbed times.

Baker, D. N.↗
NASA NTRS1974

Correlation parameters for the study of leeside heating on a lifting body at hypersonic speeds

Leeside heating was studied with the aim of gaining some insight into: (1) the magnitude of the leeside heating rates and (2) the methods to be used to extrapolate wind tunnel leeside heating rates to the full scale flight condition. This study was based on existing experimental data obtained in a hypersonic shock tunnel on lifting body configurations that are typical of shuttle orbiter vehicles. Heat transfer was first measured on the windward side to determine the boundary layer type. Then the leeside heating was investigated with the classified boundary layer. Correlation data are given on the windward turbulent boundary layer, the windward laminar boundary layer, and the leeside surfaces.

Vidal, R. J.↗
NASA NTRS1978

Correlations of catalytic combustor performance parameters

Correlations for combustion efficiency percentage drop and the minimum required adiabatic reaction temperature necessary to meet emissions goals of 13.6 g CO/kg fuel and 1.64 g HC/kg fuel are presented. Combustion efficiency was found to be a function of the cell density, cell circumference, reactor length, reference velocity, and adiabatic reaction temperature. The percentage pressure drop at an adiabatic reaction temperature of 1450 K was found to be proportional to the reference velocity to the 1.5 power and to the reactor length. It is inversely proportional to the pressure, cell hydraulic diameter, and fractional open area. The minimum required adiabatic reaction temperature was found to increase with reference velocity and decrease with cell circumference, cell density and reactor length. A catalyst factor was introduced into the correlations to account for differences between catalysts. Combustion efficiency, the percentage pressure drop, and the minimum required adiabatic reaction temperature were found to be a function of the catalyst factor. The data was from a 12 cm-diameter test rig with noble metal reactors using propane fuel at an inlet temperature of 800 K.

Bulzan, D. L.↗
NASA NTRS2017

Methods of Constructing a Blended Performance Function Suitable for Formation Flight

This paper presents two methods for constructing an approximate performance function of a desired parameter using correlated parameters. The methods are useful when real-time measurements of a desired performance function are not available to applications such as extremum-seeking control systems. The first method approximates an a priori measured or estimated desired performance function by combining real-time measurements of readily available correlated parameters. The parameters are combined using a weighting vector determined from a minimum-squares optimization to form a blended performance function. The blended performance function better matches the desired performance function mini- mum than single-measurement performance functions. The second method expands upon the first by replacing the a priori data with near-real-time measurements of the desired performance function. The resulting blended performance function weighting vector is up- dated when measurements of the desired performance function are available. Both methods are applied to data collected during formation- flight-for-drag-reduction flight experiments.

control systems↗
NASA NTRS1972

Coordinate transformation by minimizing correlations between parameters

This investigation was to determine the transformation parameters (three rotations, three translations and a scale factor) between two Cartesian coordinate systems from sets of coordinates given in both systems. The objective was the determination of well separated transformation parameters with reduced correlations between each other, a problem especially relevant when the sets of coordinates are not well distributed. The above objective is achieved by preliminarily determining the three rotational parameters and the scale factor from the respective direction cosines and chord distances (these being independent of the translation parameters) between the common points, and then computing all the seven parameters from a solution in which the rotations and the scale factor are entered as weighted constraints according to their variances and covariances obtained in the preliminary solutions. Numerical tests involving two geodetic reference systems were performed to evaluate the effectiveness of this approach.

Kumar, M.↗
NASA NTRS1994

Elevated Temperature Crack Propagation

This paper is a summary of two NASA contracts on high temperature fatigue crack propagation in metals. The first evaluated the ability of fairly simple nonlinear fracture parameters to correlate crack propagation. Hastelloy-X specimens were tested under isothermal and thermomechanical cycling at temperatures up to 980 degrees C (1800 degrees F). The most successful correlating parameter was the crack tip opening displacement derived from the J-integral. The second evaluated the ability of several path-independent integrals to correlate crack propagation behavior. Inconel 718 specimens were tested under isothermal, thermomechanical, temperature gradient, and creep conditions at temperatures up to 650 degrees C (1200 degrees F). The integrals formulated by Blackburn and by Kishimoto correlated the data reasonably well under all test conditions.

Orange, Thomas W.↗
NASA NTRS1972

Correlation of total sound power and peak sideline OASPL from jet exhausts

An empirical analysis of jet noise is made for convergent exhaust nozzles. An engineering approach to the correlation of total sound power and miximum sideline overall sound pressure level (OASPL), at 200 ft, is presented for both subsonic and supersonic jets based on available data. Data correlation for subsonic jets shows no dependency of total sound power and maximum sideline OASPL on jet density. The analysis for supersonic jets results in a correlation parameter for jet total sound power consisting of the conventional Lighthill parameter modified by considerations of jet Mach number and jet acoustic velocity. Similar parameters also correlate the maximum sideline OASPL for supersonic jets.

Vonglahn, U. H.↗
NASA NTRS1972

Correlation of total sound power and peak sideline OASPL from jet exhausts.

An empirical analysis of jet noise is made for convergent exhaust nozzles. This study, conducted at the Lewis Research Center, presents an engineering approach to the correlation of total sound power and maximum sideline OASPL (at 200 ft) for both subsonic and supersonic jets based on available data. Data correlation for subsonic jets shows no dependency of total sound power and maximum sideline OASPL on jet density. The analysis for supersonic jets results in a correlation parameter for jet total sound power consisting of the conventional Lighthill parameter modified by considerations of jet Mach number and jet acoustic velocity. Similar parameters also correlate the maximum sideline OASPL for supersonic jets.

Von Glahn, U. H.↗
NASA NTRS1975

Flight transition data for angles of attack at Mach 22 with correlations of the data

Boundary-layer transition data for angles of attack from 2.5 to 47 deg from a flight experiment with a cone that reentered at angles of attack up to 75 deg were analyzed and their local flow conditions are presented. The transition data were obtained from both acoustic and electrostatic sensors. The data from the acoustic and electrostatic sensors were correlated by use of three different sets of correlating parameters. For each set of correlating parameters, the transitional and turbulent data from the acoustic and electrostatic sensors were plotted separately. Each of the correlations was compared with a linear curve fit of previous cone-flight data at near zero angle of attack. Results indicate that the data from acoustic sensors falls below the linear curve fits to the flight data and indicates the sensitivity of the sensors. It is shown that the transition data from the electrostatic sensors tends to scatter much more than the data from the acoustic sensors. However, the data from the electrostatic sensors tends to scatter about the linear curve fits based on previous flight data.

Johnson, C. B.↗
NASA NTRS1975

Diffusion in mixed solvents. II - The heat of mixing parameter

Correlation of second-order rate constants for many reactions involving electron transfer between organic molecules, solvated electron reactions, iodine diffusion coefficients, and triplet state electron transfer reactions has been made with the heat of mixing parameter (HMP) for the aqueous binary solvent systems. The aqueous binary solvents studied are those containing methanol or ethanol (type I solvent); 1-propanol or tert-butyl alcohol (type II solvent); or sucrose or glycerol (type III solvent). A plot of the HMP vs. the diffusion parameter for each reaction yields superimposable curves for these reactions in a particular solvent mixture over the entire solvent mixture range, irrespective of the value of the reaction's rate constant or diffusion coefficient in water.

Carapellucci, P. A.↗
NASA NTRS1973

Cavitation in liquid cryogens. 2: Hydrofoil

Boundary layer principles, along with two-phase concepts, are used to improve existing correlative theory for developed cavity data. Details concerning cavity instrumentation, data analysis, correlative techniques, and experimental and theoretical aspects of a cavitating hydrofoil are given. Both desinent and thermodynamic data, using liquid hydrogen and liquid nitrogen, are reported. The thermodynamic data indicated that stable thermodynamic equilibrium exists throughout the vaporous cryogen cavities. The improved correlative formulas were used to evaluate these data. A new correlating parameter based on consideration of mass limiting two-phase flow flux across the cavity interface, is proposed. This correlating parameter appears attractive for future correlative and predictive applications. Agreement between theory and experiment is discussed, and directions for future analysis are suggested. The front half of the cavities, developed on the hydrofoil, may be considered as parabolically shaped.

Hord, J.↗
NASA NTRS1982

A bivariate gamma probability distribution with application to gust modeling

A five-parameter gamma distribution (BGD) having two shape parameters, two location parameters, and a correlation parameter is investigated. This general BGD is expressed as a double series and as a single series of the modified Bessel function. It reduces to the known special case for equal shape parameters. Practical functions for computer evaluations for the general BGD and for special cases are presented. Applications to wind gust modeling for the ascent flight of the space shuttle are illustrated.

Smith, O. E.↗