Search NASA⌕ Search

SEARCH · Search NASA

Results for “part parameters”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

PINN surrogate of Li-ion battery models for parameter inference, Part II: Regularization and application of the pseudo-2D model

Bayesian parameter inference is useful to improve Li-ion battery diagnostics and can help formulate battery aging models. However, it is computationally intensive and cannot be easily repeated for multiple cycles, multiple operating conditions, or multiple replicate cells. To reduce the computational cost of Bayesian calibration, numerical solvers for physics-based models can be replaced with faster surrogates. A physics-informed neural network (PINN) is developed as a surrogate for the pseudo-2D (P2D) battery model calibration. For the P2D surrogate, additional training regularization was needed as compared to the PINN single-particle model (SPM) developed in Part I. Both the PINN SPM and P2D surrogate models are exercised for parameter inference and compared to data obtained from a direct numerical solution of the governing equations. A parameter inference study highlights the ability to use these PINNs to calibrate scaling parameters for the cathode Li diffusion and the anode exchange current density. By realizing computational speed-ups of ~2250x for the P2D model, as compared to using standard integrating methods, the PINN surrogates enable rapid state-of-health diagnostics. Finally, in the low-data availability scenario, the testing error was estimated to ~2 mV for the SPM surrogate and ~10 mV for the P2D surrogate which could be mitigated with additional data.

25 ENERGY STORAGE↗

PINN surrogate of Li-ion battery models for parameter inference, Part I: Implementation and multi-fidelity hierarchies for the single-particle model

To plan and optimize energy storage demands that account for Li-ion battery aging dynamics, techniques need to be developed to diagnose battery internal states accurately and rapidly. Here, this study seeks to reduce the computational resources needed to determine a battery's internal states by replacing physics-based Li-ion battery models - such as the single-particle model (SPM) and the pseudo-2D (P2D) model - with a physics-informed neural network (PINN) surrogate. The surrogate model makes high-throughput techniques, such as Bayesian calibration, tractable to determine battery internal parameters from voltage responses. This manuscript is the first of a two-part series that introduces PINN surrogates of Li-ion battery models for parameter inference (i.e., state-of-health diagnostics). In this first part, a method is presented for constructing a PINN surrogate of the SPM. A multi-fidelity hierarchical training, where several neural nets are trained with multiple physics-loss fidelities is shown to significantly improve the surrogate accuracy when only training on the governing equation residuals. The implementation is made available in a companion repository (https://github.com/NREL/PINNSTRIPES). The techniques used to develop a PINN surrogate of the SPM are extended in Part II for the PINN surrogate for the P2D battery model, and explore the Bayesian calibration capabilities of both surrogates.

25 ENERGY STORAGE↗

Market-Based Coordination of Thermostatically Controlled Loads—Part II: Unknown Parameters and Case Studies

This two-part paper considers the coordination of a population of Thermostatically Controlled Loads (TCLs) with unknown parameters to achieve group objectives. The problem involves designing the bidding and market clearing strategy to motivate self-interested users to realize efficient energy allocation subject to a peak power constraint. The companion paper (Part I) formulates the problem and proposes a load coordination framework using the mechanism design approach. To address the unknown parameters, Part II of this paper presents a joint state and parameter estimation framework based on the expectation maximization algorithm. The overall framework is then validated using real-world weather data and price data, and is compared with other approaches in terms of aggregated power response. Simulation results indicate that our coordination framework can effectively improve the efficiency of the power grid operations and reduce power congestion at key times.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Born Qualified Grand Challenge LDRD Final Report

This SAND report fulfills the final report requirement for the Born Qualified Grand Challenge LDRD. Born Qualified was funded from FY16-FY18 with a total budget of ~$13M over the 3 years of funding. Overall 70+ staff, Post Docs, and students supported this project over its lifetime. The driver for Born Qualified was using Additive Manufacturing (AM) to change the qualification paradigm for low volume, high value, high consequence, complex parts that are common in high-risk industries such as ND, defense, energy, aerospace, and medical. AM offers the opportunity to transform design, manufacturing, and qualification with its unique capabilities. AM is a disruptive technology, allowing the capability to simultaneously create part and material while tightly controlling and monitoring the manufacturing process at the voxel level, with the inherent flexibility and agility in printing layer-by-layer. AM enables the possibility of measuring critical material and part parameters during manufacturing, thus changing the way we collect data, assess performance, and accept or qualify parts. It provides an opportunity to shift from the current iterative design-build-test qualification paradigm using traditional manufacturing processes to design-by-predictivity where requirements are addressed concurrently and rapidly. The new qualification paradigm driven by AM provides the opportunity to predict performance probabilistically, to optimally control the manufacturing process, and to implement accelerated cycles of learning. Exploiting these capabilities to realize a new uncertainty quantification-driven qualification that is rapid, flexible, and practical is the focus of this effort.

36 MATERIALS SCIENCE↗

NEPTUNE ON TIPTOES: DYNAMICAL HISTORIES THAT PRESERVE THE COLD CLASSICAL KUIPER BELT

The current dynamical structure of the Kuiper Belt was shaped by the orbital evolution of the giant planets, especially Neptune, during the era following planet formation when the giant planets may have undergone planet-planet scattering and/or planetesimal-driven migration. Numerical simulations of this process, while reproducing many properties of the Belt, fail to generate the high inclinations and eccentricities observed for some objects while maintaining the observed dynamically 'cold' population. We present the first of a three-part parameter study of how different dynamical histories of Neptune sculpt the planetesimal disk. Here we identify which dynamical histories allow an in situ planetesimal disk to remain dynamically cold, becoming today's cold Kuiper Belt population. We find that if Neptune undergoes a period of elevated eccentricity and/or inclination, it secularly excites the eccentricities and inclinations of the planetesimal disk. We demonstrate that there are several well-defined regimes for this secular excitation, depending on the relative timescales of Neptune's migration, the damping of Neptune's orbital inclination and/or eccentricity, and the secular evolution of the planetesimals. We model this secular excitation analytically in each regime, allowing for a thorough exploration of parameter space. Neptune's eccentricity and inclination can remain high for a limited amount of time without disrupting the cold classical belt. In the regime of slow damping and slow migration, if Neptune is located (for example) at 20 AU, then its eccentricity must stay below 0.18 and its inclination below 6 Degree-Sign .

79 ASTRONOMY AND ASTROPHYSICS↗

Neutrino interaction physics and the DUNE Near Detector

DUNE is a long-baseline neutrino oscillation experiment that will take data in a wideband neutrino beam at Fermilab, starting in the latter half of the 2020s. The experiment is planning to build a very capable near detector to facilitate the high precision extraction of oscillation parameters. Part of the mission of the near detector is to acquire powerful data sets that can be used to constrain the fits used in the oscillation analyses and improve the neutrino interaction model. In this talk, the importance and the potential of a vibrant program of neutrino interaction physics using this detector is described. A few case studies that illustrate the power of the DUNE near detector for studying neutrino interaction physics are described.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Dirac–Fock photoionization parameters for HAXPES applications, Part II: Inner atomic shells

Highlights: • Photoionization parameters are given for inner atomic shells with binding energies ≳ 1.5 keV. • The data are extension of our calculations for use in the HAXPES spectroscopy studies. • Relativistic calculations were performed by the Dirac–Fock method. • Photoionization cross sections were calculated including all multipoles. • The angular distribution parameters were obtained in the quadrupole approximation. - Abstract: Presented here are the photoionization cross sections and parameters of the photoelectron angular distribution for inner atomic subshells with binding energies beyond 1.5 keV in the photon energy range from 2 keV to 12 keV. The calculations are an extension of our previous paper containing the photoionization parameters for comparatively outer shells with binding energies lower than 1.5 keV (Trzhaskovskaya and Yarzhemsky, 2018). The calculations are intended for use in the experimental HAXPES spectroscopy investigations. The up-to-date HAXPES activity tends to increase the photon energy to investigate the deep core levels resulting in a necessity of theoretical consideration of photoionization parameters for inner atomic shells. Our relativistic calculations have been performed by the Dirac–Fock method. The photoionization cross sections have been found including all multipoles of the radiative field while the photoelectron angular distribution parameters have been obtained in the quadrupole approximation. The effect of the hole resulting in the atomic subshell after photoionization has been taken into account using the frozen orbital model.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Transport of Ion Beams in Matter: Part II

The paper deals in tutorial and systematic manner with basic concepts describing ion beams and their transport in matter. In the previous part, relativistic parameters of moving charged particles and related beam-parameters like energy, momentum, magnetic beam rigidity, momentum (energy) spread, emittance diagram and beam emittance were reviewed. The sigma-matrix, the phase-space and the Twiss parameters were introduced. In this part, basic processes of interaction of ion beams with matter are explained with emphasis on the effects especially relevant for isotope production and particle therapy. These effects include energy losses, beam fragmentation, nuclear reactions, target activation, range of ion beams in matter, range straggling, etc. Demonstrative examples are given using Monte Carlo simulations by SRIM (Stopping and Ranges of Ions in Matter) and S{sup 3}M(SRIM Supporting Software Modules).

43 PARTICLE ACCELERATORS↗

A two-fluid single-column model of turbulent shallow convection, Part III: Results and parameter sensitivity

Two-fluid modelling has recently emerged as a promising approach to representing cumulus convection in weather and climate models. This study applies the two-fluid model described in Part II Thuburn et al., 2021b to a shallow cumulus convection case study over land (ARM). Large eddy simulation data is used to tune the majority of the closures that determine the properties of entrained and detrained air. The two-fluid model is generally able to reproduce the profiles of the mean and turbulent quantities over all stages of the diurnal cycle. As such, the initiation of shallow convection and the evolution of the cloud layer are well captured. The robustness of the two-fluid model is further verified using a steady-state test case (BOMEX), in which the cloud properties are also well modelled.

54 ENVIRONMENTAL SCIENCES↗

Starobinsky-type inflation from α{sup ′}-corrections

Working in the Large Volume Scenario (LVS) of IIB Calabi-Yau flux compactifications, we construct inflationary models from recently computed higher derivative (α{sup ′}){sup 3}-corrections. Inflation is driven by a Kähler modulus whose potential arises from the aforementioned corrections, while we use the inclusion of string loop effects just to ensure the existence of a graceful exit when necessary. The effective inflaton potential takes a Starobinsky-type form V=V{sub 0}(1−e{sup −νϕ}){sup 2}, where we obtain one set-up with ν=−1/√3 and one with ν=2/√3 corresponding to inflation occurring for increasing or decreasing ϕ respectively. The inflationary observables are thus in perfect agreement with PLANCK, while the two scenarios remain observationally distinguishable via slightly varying predictions for the tensor-to-scalar ratio r. Both set-ups yield r≃(2…7) ×10{sup −3}. They hence realise inflation with moderately large fields (Δϕ∼6 M{sub Pl}) without saturating the Lyth bound. Control over higher corrections relies in part on tuning underlying microscopic parameters, and in part on intrinsic suppressions. The intrinsic part of control arises as a leftover from an approximate effective shift symmetry at parametrically large volume.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Selective laser melting of oxide dispersion strengthened MA956 alloy and its surface finishing by magnetic field assisted finishing

Selective laser melting (SLM) is a prominent metal additive manufacturing (AM) capable of processing a myriad of engineering materials with high precision and design freedom. However, similar to other AM processes, poor surface finishing has been an omnipresent problem in SLM technology. In this study, magnetic field assisted finishing (MAF) was used to finish SLM fabricated oxide dispersion strengthened (ODS) MA956, an iron-chromium-aluminum alloy. The effect of laser processing parameters on part density and surface roughness was first studied. Using a multi-objective optimization technique, the optimal parameters to obtain the highest density and lowest surface roughness were determined. Finally, MAF was applied to the parts built with the obtained optimal SLM parameters, but without significant improvement on the surfaces of as-printed samples. Hence, the surfaces of as-printed samples were post-processed (ground) to yield better initial surface conditions prior to MAF. The effect of initial roughness, iron particles size, and abrasive size on MAF performance was studied. Initial roughness had the most dominant effect followed by abrasive size. The underlying mechanism behind the dependency on initial roughness on final surface quality was analyzed by studying the change on the surface profiles with different starting initial roughness. The initial roughness required for MAF to be effective was determined. In conclusion, using the optimal processing conditions, MAF was applied to the post-processed samples to attain the final average surface roughness (R a ) as little as 0.36 μm starting from initial average roughness (R a ) of 1.53 μm.

36 MATERIALS SCIENCE↗

Radiative and flavor-violating transitions of leptons from interactions with color-octet particles

It has recently been proposed that neutrino mass could originate from Yukawa interactions of leptons with new colored particles. This raises the interesting possibility of testing mass generation through copious production of those particles at hadron colliders. A realistic assessment of this, however, should take into account how large those interactions could be, based on available precision results. In this work we make a systematic analysis of the flavor structure in Yukawa couplings, provide a convenient parametrization, and investigate the rare radiative and pure leptonic decays of the muon and tau leptons. For general values of the parameters, the muon decays set stringent constraints on the couplings, and all rare tau decays are far below the current experimental sensitivity. However, there is room in parameter space in which the muon decays could be significantly suppressed by destructive interference between colored particles without generically reducing the couplings themselves. This is also the region of parameters that is relevant to collider physics. We show that for this part of parameter space some tau decays can reach or are close to the current level of precision.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Zener Diode Compact Model Parameter Extraction Using Xyce-Dakota Optimization.

This report presents a detailed process for compact model parameter extraction for DC circuit Zener diodes. Following the traditional approach of Zener diode parameter extraction, circuit model representation is defined and then used to capture the different operational regions of a real diode's electrical behavior. The circuit model contains 9 parameters represented by resistors and characteristic diodes as circuit model elements. The process of initial parameter extraction, the identification of parameter values for the circuit model elements, is presented in a way that isolates the dependencies between certain electrical parameters and highlights both the empirical nature of the extraction and portions of the real diode physical behavior which of the parameters are intended to represent. Optimization of the parameters, a necessary part of a robost parameter extraction process, is demonstrated using a 'Xyce-Dakota' workflow, discussed in more detail in the report. Among other realizations during this systematic approach of electrical model parameter extraction, non-physical solutions are possible and can be difficult to avoid because of the interdependencies between the different parameters. The process steps described are fairly general and can be leveraged for other types of semiconductor device model extractions. Also included in the report are recommendations for experiment setups for generating optimum dataset for model extraction and the Parameter Identification and Ranking Table (PIRT) for Zener diodes.

42 ENGINEERING↗

Optical photon transport in powdered-phosphor scintillators. Part II. Calculation of single-scattering transport parameters

Purpose: Monte Carlo methods based on the Boltzmann transport equation (BTE) have previously been used to model light transport in powdered-phosphor scintillator screens. Physically motivated guesses or, alternatively, the complexities of Mie theory have been used by some authors to provide the necessary inputs of transport parameters. The purpose of Part II of this work is to: (i) validate predictions of modulation transform function (MTF) using the BTE and calculated values of transport parameters, against experimental data published for two Gd{sub 2}O{sub 2}S:Tb screens; (ii) investigate the impact of size-distribution and emission spectrum on Mie predictions of transport parameters; (iii) suggest simpler and novel geometrical optics-based models for these parameters and compare to the predictions of Mie theory. A computer code package called phsphr is made available that allows the MTF predictions for the screens modeled to be reproduced and novel screens to be simulated. Methods: The transport parameters of interest are the scattering efficiency (Q{sub sct}), absorption efficiency (Q{sub abs}), and the scatter anisotropy (g). Calculations of these parameters are made using the analytic method of Mie theory, for spherical grains of radii 0.1-5.0 {mu}m. The sensitivity of the transport parameters to emission wavelength is investigated using an emission spectrum representative of that of Gd{sub 2}O{sub 2}S:Tb. The impact of a grain-size distribution in the screen on the parameters is investigated using a Gaussian size-distribution ({sigma}= 1%, 5%, or 10% of mean radius). Two simple and novel alternative models to Mie theory are suggested: a geometrical optics and diffraction model (GODM) and an extension of this (GODM+). Comparisons to measured MTF are made for two commercial screens: Lanex Fast Back and Lanex Fast Front (Eastman Kodak Company, Inc.). Results: The Mie theory predictions of transport parameters were shown to be highly sensitive to both grain size and emission wavelength. For a phosphor screen structure with a distribution in grain sizes and a spectrum of emission, only the average trend of Mie theory is likely to be important. This average behavior is well predicted by the more sophisticated of the geometrical optics models (GODM+) and in approximate agreement for the simplest (GODM). The root-mean-square differences obtained between predicted MTF and experimental measurements, using all three models (GODM, GODM+, Mie), were within 0.03 for both Lanex screens in all cases. This is excellent agreement in view of the uncertainties in screen composition and optical properties. Conclusions: If Mie theory is used for calculating transport parameters for light scattering and absorption in powdered-phosphor screens, care should be taken to average out the fine-structure in the parameter predictions. However, for visible emission wavelengths ({lambda} < 1.0 {mu}m) and grain radii (a > 0.5 {mu}m), geometrical optics models for transport parameters are an alternative to Mie theory. These geometrical optics models are simpler and lead to no substantial loss in accuracy.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Beam experiments related to the head-on beam-beam compensation project at RHIC

Beam experiments have been performed in RHIC to determine some key parameters of the RHIC electron lenses, and to test the capability of verifying lattice modifications by beam measurements. We report the status and recent results of these experiments. The Relativistic Heavy Ion Collider (RHIC) consists of two superconducting storage rings that intersect at six locations around its circumference. Beams collide in interaction points (IPs) 6 and 8, which are equipped with the detectors STAR and PHENIX, respectively (Fig. 1). With the polarized proton working point constrained between 2/3 and 7/10 to achieve good luminosity lifetime and maintain polarization, the proton bunch intensity is limited to 2 {center_dot} 10{sup 11} protons per bunch by the resulting beam-beam tuneshift. To overcome this limitation, installation of an electron lens in IP 10 is foreseen to partially compensate the beam-beam effect and reduce the beam-beam tuneshift parameter. As part of this project, beam experiments are being performed at RHIC to determine key parameters of the electron lens as well as to verify lattice modifications.

43 PARTICLE ACCELERATORS↗

Data for: Ultrasonic characterization of material heterogeneities in stainless steel parts fabricated by powder bed fusion

These are the raw ultrasonic waveform files and nanoindentation measurements for three additively manufactured 316L stainless steel components with different fabrication parameters. Each part's length is divided into four segmented regions where their fabrication energy densities change. Part V+ begins at 33 J/mm^3 and increases in energy density by 3 J/mm^3 with each segment. Part C remains at a constant 33 J/mm^3 throughout the part. Part V- begins at 33 J/mm^3 and decreases in energy density by 3 J/mm^3 with each segment. We have found that the ultrasonic waves in regions with higher energy densities will traverse more quickly, as shown by the shorter time of flight, and vice versa. Similarly, nanoindentation measurements of reduced modulus and hardness follow this trend. We have measured the direction in which the parts were fabricated (build direction) and the segmented regions that are perpendicular to the build direction (transverse directions). The build direction longitudinal wave velocity measurements are considerably lower than their transverse direction counterparts, indicating anisotropy between the two directions. In Part C, we have removed material from one of its surfaces and recorded its ultrasonic and nanoindentation measurements with each material removal iteration. Changes in the material properties are more prominent by nanoindentation, suggesting material heterogeneity between the part's surface and interior. The README.txt file has information on how to navigate the files and process the data.

Anisotropy↗