SEARCH · Search NASA

Results for “patch elements”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

All sources NASA NTRS DOE OSTI

DOE OSTI2019

Design of a wideband microstrip nanoantenna array

This paper presents the design of a logarithmic array of microstrip nano-antennas at terahertz frequencies. For applications in which small antennas are required, microstrip antennas are preferred. However, they have a narrow bandwidth. To overcome this problem in microstrip antennas, a log-periodic nanoantenna design is presented which exhibits a wide bandwidth and ultra-compact design. This antenna is smaller in size compared to log-periodic antennas in microwave bands and comparable and better radiation characteristics. The proposed Log-periodic microstrip nanoantenna array consists of seven patch elements on a dielectric layer and are fed directly by a feed line through the branch lines connected to each of the elements. Scaling factor, τ = 0.95 is considered for this design and inset feed is used. In this structure, the substrate has a relative dielectric constant of ε{sub r} = 4.4 and a thickness of h = 800 nm. For good performance at high frequencies, gold is used for the design of the antenna. The considered operating frequency is 3.3 THz corresponding to a wavelength of 91 µm. Good impedance matching and a wide bandwidth of 800 GHz is obtained.

42 ENGINEERING↗

DOE OSTI2023

Local element operations for curved simplex meshes

Summary Mesh optimization procedures are generally a combination of node smoothing and discrete operations which affect a small number of elements to improve the quality of the overall mesh. These procedures are useful as a post‐processing step in mesh generation procedures and in applications such as fluid simulations with severely deforming domains. In order to perform high‐order mesh optimization, these ingredients must also be extended to high‐order (curved) meshes. In this work, we present a method to perform local element operations on curved meshes. The mesh operations discussed in this work are edge/face swaps, edge collapses, and edge splitting (more generally refinement) for triangular and tetrahedral meshes. These local operations are performed by first identifying the patch of elements which contain the edge/face being acted on, performing the operation as a “straight‐sided one" by placing the high‐order nodes via an isoparametric mapping from the master element, and smoothing the high‐order nodes on the elements in the patch by minimizing a Jacobian‐based high‐order mesh distortion measure. Since the initial “straight‐sided guess” from the placement of the nodes via the isoparametric mapping frequently results in invalid elements, the distortion measure must be regularized which allows for mesh untangling for the optimization to succeed. We present several examples in 2D and 3D to demonstrate these local operations and how they can be combined with a high‐order node smoothing procedure to maintain mesh quality when faced with severe deformations.

Shi, A.↗

DOE OSTI2023

A dynamic variational multiscale method on unstructured meshes for stationary transport problems

Here, this paper presents a variational multiscale (VMS) based finite element method where the stabilization parameter is computed dynamically. The current dynamic procedure takes in a general structure/form of the stabilization parameter with unknown coefficients and computes them dynamically in a local fashion resulting in a dynamic VMS-based finite element method. Thus, a static stabilization parameter with pre-defined coefficients is not needed. A variational Germano identity (VGI) based local procedure suitable for unstructured meshes is developed to perform the dynamic computation in a local fashion. The local VGI based procedure is applied for each interior vertex in the mesh and unknown coefficients are first determined locally at each vertex, and subsequently, for each element a maximum value is taken over the vertices of the element. To make the current procedure practical, a coarser secondary solution is constructed from the primary coarse-scale solution, which is done locally over a patch of elements around each interior vertex. Further, averaging steps are employed to make the local dynamic procedure robust. Currently, the new dynamic VMS formulation is applied to steady problems governed by the advection-diffusion and incompressible Navier-Stokes equations in both 1D and 2D to demonstrate its efficacy and effectiveness.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2022

Adaptive workflow for simulation of RF heaters

Accurate RF (Radio Frequency) simulations of fusion systems like ITER require the definition of high-fidelity analysis geometries that include detailed antenna, reactor wall, and physics regions. Here, this paper will describe a workflow for the execution of adaptive high-performance simulations of RF fusion systems. In this workflow, the simulation input consists of a CAD model attributed with the needed analysis attributes. The analysis mesh is automatically generated and the analysis steps are executed using the time-harmonic Maxwell's equations solved using high-order Nédélec finite elements. A patch recovery-based error estimator is used to drive a conforming mesh adaptation procedure.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2023

Data-Driven Smoothers for Extreme-Scale Computing

Patch-based relaxation refers to a family of methods for solving linear systems which partitions the matrix into smaller pieces often corresponding to groups of adjacent degrees of freedom residing within patches of the computational domain. The two most common families of patch-based methods are block-Jacobi and Schwarz methods, where the former typically corresponds to non-overlapping domains and the later implies some overlap. We focus on cases where each patch consists of the degrees of freedom on a finite element method mesh cell. Patch methods often capture complex local physics much more effectively than simpler point-smoothers such as Jacobi; however, forming, inverting, and applying each patch can be prohibitively expensive in terms of both storage and computation time. To this end, we propose several approaches for performing analysis on these patches and constructing a reduced representation. The compression techniques rely on either matrix norm comparisons or unsupervised learning via a clustering approach. We illustrate how it is frequently possible to retain/factor less than 5% of all patches and still develop a method that converges only a little slower than when all patches are stored/factored.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2016

THE SOLAR INTERNETWORK. II. FLUX APPEARANCE AND DISAPPEARANCE RATES

Small-scale internetwork magnetic fields are important ingredients of the quiet Sun. In this paper we analyze how they appear and disappear on the solar surface. Using high resolution Hinode magnetograms, we follow the evolution of individual magnetic elements in the interior of two supergranular cells at the disk center. From up to 38 hr of continuous measurements, we show that magnetic flux appears in internetwork regions at a rate of 120 ± 3 Mx cm{sup −2} day{sup −1} (3.7 ± 0.4 × 10{sup 24} Mx day{sup −1} over the entire solar surface). Flux disappears from the internetwork at a rate of 125 ± 6 Mx cm{sup −2} day{sup −1} (3.9 ± 0.5 × 10{sup 24} Mx day{sup −1}) through fading of magnetic elements, cancelation between opposite-polarity features, and interactions with network patches, which converts internetwork elements into network features. Most of the flux is lost through fading and interactions with the network, at nearly the same rate of about 50 Mx cm{sup −2} day{sup −1}. Our results demonstrate that the sources and sinks of internetwork magnetic flux are well balanced. Using the instantaneous flux appearance and disappearance rates, we successfully reproduce the time evolution of the total unsigned flux in the two supergranular cells.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2016

Wireless Interrogation of a High Temperature Antenna Sensor Without Electronics

This paper presents a novel interrogation mechanism for an antenna sensor subjected to high temperatures. In sensor node, an Ultra-wide Band (UWB) microstrip antenna was used as a wireless Tx/Rx transceiver to amplify the reflected interrogation signal from the temperature-sensing element, i.e. the patch antenna-sensor. A microstrip delay line was used to connect the Tx/Rx antenna and the antenna-sensor so that the reflected signal from the sensor node is delayed and can be separated from the background clutter using time-domain (T-D) gating technique. In this paper, the principle of operation of the proposed interrogation mechanism is first discussed, followed by the design and simulations of the sensor node circuitry. Finally, a temperature test was conducted to validate the wireless temperature sensing performance of the antenna sensor.

Tchafa, Franck Mbanya↗

DOE OSTI2021

Shared aperture antenna array

A shared aperture antenna array including an array of antennas is disclosed. Elements of neighboring antennas are shared to create additional antennas. The shared elements include radiating patches and apertures. Each antenna shares an aperture with neighboring antennas. The array of antennas may be linear or two-dimensional. A phase shifting network with single-pole-single-throw reflective switches may be coupled to the antennas.

Tedeschi, Jeffrey R.↗

DOE OSTI2024

Shared aperture antenna array

Tedeschi, Jonathan R.↗

DOE OSTI2021

A Novel Miniaturized MIMO Microstrip Patch Antenna Array with EBG- and Slot-Loading

A compact four-element multiple-input multiple-output (MIMO) antenna array based on the miniaturized mi-crostrip patch is presented. The reduction in array form factor is realized by partially populating the ground plane with elec-tromagnetic band gap (EBG) cells constructed from cross slots, in combination with reactively loading each patch with a slot. The resultant 2 × 2 array system demonstrates excellent inter-element isolation and can be easily fabricated using traditional milling and printing techniques, as it exploits a 2D layout that can be conveniently implemented on two sides of a single-layer substrate, without the need for any via structures. The operation of the array near the 2.5 GHz band is verified with full-wave simulations. The size of the new design is approximately 42% of that employing conventional patch elements.

Liao, DaHan↗

DOE OSTI2012

Miniaturized Multi-Band Antenna via Element Collocation

The resonant frequency of a microstrip patch antenna may be reduced through the addition of slots in the radiating element. Expanding upon this concept in favor of a significant reduction in the tuned width of the radiator, nearly 60% of the antenna metallization is removed, as seen in the top view of the antenna’s radiating element (shown in red, below, left). To facilitate an increase in the gain of the antenna, the radiator is suspended over the ground plane (green) by an air substrate at a height of 0.250" while being mechanically supported by 0.030" thick Rogers RO4003 laminate in the same profile as the element. Although the entire surface of the antenna (red) provides 2.45 GHz operation with insignificant negative effects on performance after material removal, the smaller square microstrip in the middle must be isolated from the additional aperture in order to afford higher frequency operation. A low insertion loss path centered at 2.45 GHz may simultaneously provide considerable attenuation at additional frequencies through the implementation of a series-parallel, resonant reactive path. However, an inductive reactance alone will not permit lower frequency energy to propagate across the intended discontinuity. To mitigate this, a capacitance is introduced in series with the inductor, generating a resonance at 2.45 GHz with minimum forward transmission loss. Four of these reactive pairs are placed between the coplanar elements as shown. Therefore, the aperture of the lower-frequency outer segment includes the smaller radiator while the higher frequency section is isolated from the additional material. In order to avoid cross-polarization losses due to the orientation of a transmitter or receiver in reference to the antenna, circular polarization is realized by a quadrature coupler for each collocated antenna as seen in the bottom view of the antenna (right). To generate electromagnetic radiation concentrically rotating about the direction of propagation, ideally one-half of the power must be delivered to the output of each branch with a phase shift of 90 degrees and identical amplitude. Due to this, each arm of the coupler is spaced λ/4 wavelength apart.

42 ENGINEERING↗

DOE OSTI2014

The solar internetwork. I. Contribution to the network magnetic flux

The magnetic network (NE) observed on the solar surface harbors a sizable fraction of the total quiet Sun flux. However, its origin and maintenance are not well known. Here we investigate the contribution of internetwork (IN) magnetic fields to the NE flux. IN fields permeate the interior of supergranular cells and show large emergence rates. We use long-duration sequences of magnetograms acquired by Hinode and an automatic feature tracking algorithm to follow the evolution of NE and IN flux elements. We find that 14% of the quiet Sun (QS) flux is in the form of IN fields with little temporal variations. IN elements interact with NE patches and modify the flux budget of the NE either by adding flux (through merging processes) or by removing it (through cancellation events). Mergings appear to be dominant, so the net flux contribution of the IN is positive. The observed rate of flux transfer to the NE is 1.5 × 10{sup 24} Mx day{sup –1} over the entire solar surface. Thus, the IN supplies as much flux as is present in the NE in only 9-13 hr. Taking into account that not all the transferred flux is incorporated into the NE, we find that the IN would be able to replace the entire NE flux in approximately 18-24 hr. This renders the IN the most important contributor to the NE, challenging the view that ephemeral regions are the main source of flux in the QS. About 40% of the total IN flux eventually ends up in the NE.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2024

Current potential patches

A novel form of the current potential, a mathematical tool for the design of stellarators and stellarator coils, is developed. Specifically, these are current potentials with a finite-element basis, called current potential patches. Current potential patches leverage the relationship between distributions of magnetic dipoles and current potentials to explore limits of the access properties of stellarator coil sets. An example calculation is shown using the Helically Symmetric Experiment (HSX) equilibrium, demonstrating the method's use in coil design and understanding the limits of the access properties of coil sets. Current potential patches have additional desirable properties such as of promoting sparse current sheet solutions and identifying crucial locations of shaping current placement. A result is found for the HSX equilibrium that shaping currents covering only 22% of the winding surface are sufficient to produce the equilibrium to a good accuracy, provided a toroidal field is generated by an exterior coil set.

Elder, Todd↗

DOE OSTI2017

Layer-by-layer assembly of patchy particles as a route to nontrivial structures

Here, we propose a strategy for robust high-quality self-assembly of nontrivial periodic structures out of patchy particles and investigate it with Brownian dynamics simulations. Its first element is the use of specific patch-patch and shell-shell interactions between the particles, which can be implemented through differential functionalization of patched and shell regions with specific DNA strands. The other key element of our approach is the use of a layer-by-layer protocol that allows one to avoid the formation of undesired random aggregates. As an example, we design and self-assemble in silico a version of a double diamond lattice in which four particle types are arranged into bcc crystal made of four fcc sublattices. The lattice can be further converted to cubic diamond by selective removal of the particles of certain types. These results demonstrate that by combining the directionality, selectivity of interactions, and the layer-by-layer protocol, a high-quality robust self-assembly can be achieved.

36 MATERIALS SCIENCE↗

DOE OSTI2019

Non-contact optical system for detecting ultrasound waves from a surface

A system for detecting pressure, acoustic or ultrasound waves within an entity having a surface including the steps of attaching a signal converting material to the surface. The waves are generated by direct ejection from the surface, generation via energy deposition on the surface, generated spontaneously or, generated by directing light energy to the light absorbing target. The absorbing target subsequently generates acoustic pressure waves. The acoustic waves propagate to the surface of the entity and the signal converting material, wherein the acoustic pressure waves create vibrations in the signal converting material; and detecting the waves in the signal converting material with an optical detection system. Information about the absorbing target is obtained by the absorbing target reflecting the waves. The signal converting material can be a gel-like material containing optical elements, a multi-layer patch, or other material.

Demos, Stavros G.↗

DOE OSTI2016

Far-Field Interrogation of Microstrip Patch Antenna for Temperature Sensing Without Electronics

Temperature sensing without electronics is demonstrated through wireless interrogation of passive antenna-sensors. The sensor node is equipped with an ultra-wide-band microstrip antenna as the transmitting/receiving (Tx/Rx) antenna and a microstrip patch antenna serving as the temperature-sensing element. A microstrip transmission line connecting the Tx/Rx antenna and the antenna-sensor delays the signal reflected from the sensing element and thus separated it from the background clutter. The operation principle of the wireless sensing scheme is first discussed, followed by the design and simulations of the sensor node circuitry. Furthermore, a digital signal processing algorithm that extracts the antenna resonant frequency from the wirelessly received signal is also described. Temperature tests were conducted to validate the performance of the wireless antenna sensor inside an oven.

42 ENGINEERING↗

DOE OSTI2016

TH-CD-206-09: Learning-Based MRI-CT Prostate Registration Using Spare Patch-Deformation Dictionary

Purpose: To enable MRI-guided prostate radiotherapy, MRI-CT deformable registration is required to map the MRI-defined tumor and key organ contours onto the CT images. Due to the intrinsic differences in grey-level intensity characteristics between MRI and CT images, the integration of MRI into CT-based radiotherapy is very challenging. We are developing a learning-based registration approach to address this technical challenge. Methods: We propose to estimate the deformation between MRI and CT images in a patch-wise fashion by using the sparse representation technique. Specifically, we assume that two image patches should follow the same deformation if their patch-wise appearance patterns are similar. We first extract a set of key points in the new CT image. Then, for each key point, we adaptively construct a coupled dictionary from the training MRI-CT images, where each coupled element includes both appearance and deformation of the same image patch. After calculating the sparse coefficients in representing the patch appearance of each key point based on the constructed dictionary, we can predict the deformation for this point by applying the same sparse coefficients to the respective deformations in the dictionary. Results: This registration technique was validated with 10 prostate-cancer patients’ data and its performance was compared with the commonly used free-form-deformation-based registration. Several landmarks in both images were identified to evaluate the accuracy of our approach. Overall, the averaged target registration error of the intensity-based registration and the proposed method was 3.8±0.4 mm and 1.9±0.3 mm, respectively. Conclusion: We have developed a novel prostate MR-CT registration approach based on patch-deformation dictionary, demonstrated its clinical feasibility, and validated its accuracy. This technique will either reduce or compensate for the effect of patient-specific treatment variation measured during the course of radiotherapy, is therefore well-suited for a number of MRI-guided adaptive radiotherapy, and potentially enhance prostate radiotherapy treatment outcome.

60 APPLIED LIFE SCIENCES↗

DOE OSTI2020

Constructing protein polyhedra via orthogonal chemical interactions

Many proteins exist naturally as symmetrical homooligomers or homopolymers. The emergent structural and functional properties of such protein assemblies have inspired extensive efforts in biomolecular design2–5. As synthesized by ribosomes, proteins are inherently asymmetric. Therefore, they must acquire multiple surface patches that selectively associate to generate the different symmetry elements needed to form higher-order architectures—a daunting task for protein design. Here we address this problem using an inorganic chemical approach, whereby multiple modes of protein–protein interactions and symmetry are simultaneously achieved by selective, ‘one-pot’ coordination of soft and hard metal ions. We show that a monomeric protein (protomer) appropriately modified with biologically inspired hydroxamate groups and zinc-binding motifs assembles through concurrent Fe 3+ and Zn 2+ coordination into discrete dodecameric and hexameric cages. Our cages closely resemble natural polyhedral protein architectures and are, to our knowledge, unique among designed systems in that they possess tightly packed shells devoid of large apertures. At the same time, they can assemble and disassemble in response to diverse stimuli, owing to their heterobimetallic construction on minimal interprotein-bonding footprints. With stoichiometries ranging from [2 Fe:9 Zn:6 protomers] to [8 Fe:21 Zn:12 protomers], these protein cages represent some of the compositionally most complex protein assemblies—or inorganic coordination complexes—obtained by design.

36 MATERIALS SCIENCE↗