Search NASA⌕ Search

SEARCH · Search NASA

Results for “patterned beam”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

PIP-II 800 MeV Proton Linac Beam Pattern Generator

The PIP2 IT Beam Pattern Generator is the system that synchronizes beam injection and the RF systems between the PIP2 LINAC to the Booster. The RF frequencies of these two accelerator systems are not harmonically related. Synchronization is accomplished by controlling two MEBT Beam Choppers, which select 162.5MHz beam bunches from the LEBT and RFQ to produce an appropriate reduced beam bunch pattern that enables bucket-to-bucket transfer to the Booster RF at 46.46MHz (84th harmonic). This chopping pattern also reduces the beam current to an average of 2mA over the Booster injection, matching the Linac nominal beam current. The BPG also generates the RF frequency/phase reference which the Booster will phase lock to during injection. The BPG is fully programmable, allowing for arbitrary beam patterns with adjustable timing parameters, having a fine adjustment resolution of 38ps. The latter is accomplished using digital signal processing techniques. This paper discusses the design of the BPG, its construction, test results, and operational experience after being integrated into the PIP2 IT test accelerator and concludes with a discussion of the system’s performance and future plans.

43 PARTICLE ACCELERATORS↗

Update on PIP-II beam pattern generator upgrade

The beam pattern generator enables the transfer of beam pulses from the PIP-II linac to the Booster ring, the two RF systems being non-harmonically related. It is synchronized to the timing system to provide beam arrival information to the downstream accelerator subsystems. The design is being upgraded with COTS components and is being developed with a collaboration with SLAC.The pattern generation, digital signal processing and the user interface to an external EPICS server are integrated onto the ARM processor of the SOCFPGA. The progress of the system development is described.

Varghese, P. [Fermilab]↗

Optimization of beam configuration in laser fusion based on the laser beam pattern

A simple method based on the laser beam pattern is proposed and numerically demonstrated to optimize a beam configuration for direct drive laser fusion. In this method, both the geometrical factor G{sub l} and the single beam factor B{sub l} are considered. By diminishing the product of B{sub l}·G{sub l}, the irradiation nonuniformity can be decreased to the order of 10{sup −5}. This optimization method can be applied on the design of irradiation systems for an arbitrary number of beams and any axially symmetric beam patterns.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Optimizing HAARP Beam Pattern for Generation of Strong F‐Region Field‐Aligned Irregularities

Field-aligned irregularities (FAIs) are the signatures of plasma turbulence and convection in the mid- and high-latitude F-region ionosphere, and also provide coherent backscatter targets for HF radars. To serve irregularity generation and characterization studies, we conducted experiments at the High-frequency Active Auroral Research Program (HAARP) in August 2023 with the goal of identifying the optimal HAARP beam pattern for reliable generation of intense FAIs over a large geographic region. The HAARP beam patterns we tested were the commonly-used narrow beam, also known as L0, as well as the wider L1 and L2 “twisted” beam patterns. The size and intensity of the FAI region generated by each HAARP beam pattern was quantified using the Kodiak Island Super Dual Auroral Radar Network (SuperDARN) radar. Stimulated electromagnetic emissions (SEE) from heater wave-FAI scattering were also recorded using a receiver located near HAARP. The L1 beam pattern was found to produce the strongest SuperDARN backscatter over the largest region. Although the heater frequency was intended to be tuned a few hundred kHz below the F-region critical frequency (foF2) during each experiment, difficulty in estimating foF2 during the campaign likely resulted in HAARP heating at significantly different frequency ranges around foF2 during each experiment. Although this additional free parameter complicated data analysis for this study, the SuperDARN and SEE measurements have led to further inquiry into the role heater frequency plays in the artificial generation of FAIs.

58 GEOSCIENCES↗

The beaming pattern of external Compton emission from relativistic outflows: The case of anisotropic distribution of electrons

The beaming pattern of radiation emitted by a relativistically moving source, such as jets in microquasars, active galactic nuclei, and gamma-ray bursts, is a key issue for understanding acceleration and radiation processes in these objects. In this paper, we introduce a formalism based on a solution of the photon transfer equation to study the beaming patterns for emission produced by electrons accelerated in the jet and the upscattering photons of low-energy radiation fields of external origin (the so-called external Compton scenario). The formalism allows us to treat non-stationary, non-homogeneous, and anisotropic distributions of electrons, but assuming homogeneous/isotropic and non-variable target photon fields. We demonstrate the non-negligible impact of the anisotropy in the electron distribution on angular and spectral characteristics of the EC radiation.

79 ASTRONOMY AND ASTROPHYSICS↗

Selective atomic layer deposition with electron-beam patterned self-assembled monolayers

The authors selectively deposited nanolines of titanium oxide (TiO{sub 2}) through atomic layer deposition (ALD) using an octadecyltrichlorosilane (OTS) self-assembled monolayer (SAM) as a nucleation inhibition layer. Electron-beam (e-beam) patterning is used to prepare nanoline patterns in the OTS SAM on SiO{sub 2}/Si substrates suitable for selective ALD. The authors have investigated the effect of an e-beam dose on the pattern width of the selectively deposited TiO{sub 2} lines. A high dose (e.g., 20 nC/cm) causes broadening of the linewidth possibly due to scattering, while a low dose (e.g., 5 nC/cm) results in a low TiO{sub 2} deposition rate because of incomplete exposure of the OTS SAMs. The authors have confirmed that sub-30 nm isolated TiO{sub 2} lines can be achieved by selective ALD combined with OTS patterned by EBL at an accelerating voltage of 2 kV and line dose of 10 nC/cm. This research offers a new approach for patterned gate dielectric layer fabrication, as well as potential applications for nanosensors and solar cells.

36 MATERIALS SCIENCE↗

Electron Beam Pattern Rotation as a Method of Tunable Bunch Train Generation

Transversely modulated electron beams can be formed in photo injectors via microlens array (MLA) UV laser shap- ing technique. Microlenses can be arranged in polygonal lattices, with resulting transverse electron beam modula- tion mimicking the lenses pattern. Conventionally, square MLAs are used for UV laser beam shaping, and generated electron beam patterns form square beamlet arrays. The MLA setup can be placed on a rotational mount, thereby rotating electron beam distribution. In combination with transverse-to-longitudinal emittance exchange (EEX) beam line, it allows to vary beamlets horizontal projection and tune electron bunch train. In this paper, we extend the technique to the case of different MLA lattice arrangements and explore the benefits of its rotational symmetries.

43 PARTICLE ACCELERATORS↗

Mitigating illumination gradients in a SAR image based on the image data and antenna beam pattern

Illumination gradients in a synthetic aperture radar (SAR) image of a target can be mitigated by determining a correction for pixel values associated with the SAR image. This correction is determined based on information indicative of a beam pattern used by a SAR antenna apparatus to illuminate the target, and also based on the pixel values associated with the SAR image. The correction is applied to the pixel values associated with the SAR image to produce corrected pixel values that define a corrected SAR image.

47 OTHER INSTRUMENTATION↗

Three-dimensional fabrication and characterisation of core-shell nano-columns using electron beam patterning of Ge-doped SiO{sub 2}

A focused electron beam in a scanning transmission electron microscope (STEM) is used to create arrays of core-shell structures in a specimen of amorphous SiO{sub 2} doped with Ge. The same electron microscope is then used to measure the changes that occurred in the specimen in three dimensions using electron tomography. The results show that transformations in insulators that have been subjected to intense irradiation using charged particles can be studied directly in three dimensions. The fabricated structures include core-shell nano-columns, sputtered regions, voids, and clusters.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The effect of residual gas scattering on Ga ion beam patterning of graphene

The patterning of graphene by a 30 kV Ga{sup +} focused ion beam (FIB) is studied by in-situ and ex-situ Raman spectroscopy. It is found that the graphene surrounding the patterned target area can be damaged at remarkably large distances of more than 10 μm. We show that scattering of the Ga ions in the residual gas of the vacuum system is the main cause of the large range of lateral damage, as the size and shape of the tail of the ion beam were strongly dependent on the system background pressure. The range of the damage was therefore greatly reduced by working at low pressures and limiting the total amount of ions used. This makes FIB patterning a feasible alternative to electron beam lithography as long as residual gas scattering is taken into account.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Nanoscale dynamics during self-organized ion beam patterning of Si. II. Kr + bombardment

Understanding the self-organized ion beam nanopatterning of elemental semiconductors, particularly silicon, is of intrinsic scientific and technological interest. This is the second component of a two-part coherent x-ray scattering and x-ray photon correlation spectroscopy (XPCS) investigation of the kinetics and fluctuation dynamics of nanoscale ripple development on silicon during 1 keV Ar + (part I) and Kr + bombardment at 65° polar angle. Here it is found that the ion-enhanced viscous flow relaxation is essentially equal for Kr + -induced patterning as previously found for Ar + patterning despite the difference in ion masses. However, the magnitude of the surface curvature-dependent roughening rate in the early-stage kinetics is larger for Kr + than for Ar + , consistent with expectations that the heavier ion gives an increased mass redistributive contribution to the initial surface instability. As with the Ar + case, fluctuation dynamics in the late stage show a peak in correlation times at the length scale corresponding to the dominant structural feature on the surface—the ripples. Finally, it is shown that speckle motion during the surface evolution can be analyzed to determine spatial inhomogeneities in erosion rate and ripple velocity. This allows the direction and speed of ripple motion to be measured in a real time experiment. In the present case, ripple motion is found to be into the projected direction of the ion source, in contrast to expectations from an existing sputter erosion driven model with parameters derived from binary collision approximation simulations.

36 MATERIALS SCIENCE↗

Effects of Beam Filling Pattern on Beam Ion Instability and Beam Loading In PEP-X

A proposed high-brightness synchrotron light source (PEP-X) is under design at SLAC. The 4.5-GeV PEP-X storage ring has four theoretical minimum emittance (TME) cells to achieve the very low emittance and two double-bend achromat (DBA) cells to provide spaces for IDs. Damping wigglers will be installed in zero-dispersion straights to reduce the emittance below 0.1 nm. Ion induced beam instability is one critical issue due to its ultra small emittance. Third harmonic cavity can be used to lengthen the bunch in order to improve the beam's life time. Bunch-train filling pattern is proposed to mitigate both the fast ion instability and beam loading effect. This paper investigates the fast ion instability and beam loading for different beam filling patterns.

43 PARTICLE ACCELERATORS↗

Direct electron beam patterning of electro-optically active PEDOT:PSS

The optical and electronic tunability of the conductive polymer poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) has enabled emerging applications as diverse as bioelectronics, flexible electronics, and micro- and nano-photonics. High-resolution spatial patterning of PEDOT:PSS opens up opportunities for novel active devices in a range of fields. However, typical lithographic processes require tedious indirect patterning and dry etch processes, while solution-processing methods such as ink-jet printing have limited spatial resolution. Here, we report a method for direct write nano-patterning of commercially available PEDOT:PSS through electron-beam induced solubility modulation. The written structures are water stable and maintain the conductivity as well as electrochemical and optical properties of PEDOT:PSS, highlighting the broad utility of our method. We demonstrate the potential of our strategy by preparing prototypical nano-wire structures with feature sizes down to 250 nm, an order of magnitude finer than previously reported direct write methods, opening the possibility of writing chip-scale microelectronic and optical devices. We finally use the high-resolution writing capabilities to fabricate electrically-switchable optical diffraction gratings. We show active switching in this archetypal system with >95 % contrast at CMOS-compatible voltages of +2 V and -3 V, offering a route towards highly-miniaturized dynamic optoelectronic devices.

42 ENGINEERING↗

Focused ion beam patterned Fe thin films A study by selective area Stokes polarimetry and soft x-Ray microscopy

We demonstrate the potential to modify the magnetic behavior and structural properties of ferromagnetic thin films using focused ion beam 'direct-write' lithography. Patterns inspired by the split-ring resonators often used as components in meta-materials were defined upon 15 nm Fe films using a 30 keV Ga{sup +} focused ion beam at a dose of 2 x 10{sup 16} ions cm{sup -2}. Structural, chemical and magnetic changes to the Fe were studied using transmission soft X-ray microscopy at the ALS, Berkeley CA. X-ray absorption spectra showed a 23% reduction in the thickness of the film in the Ga irradiated areas, but no chemical change to the Fe was evident. X-ray images of the magnetic reversal process show domain wall pinning around the implanted areas, resulting in an overall increase in the coercivity of the film. Transmission electron microscopy showed significant grain growth in the implanted regions.

36 MATERIALS SCIENCE↗

Asymmetry and non-random orientation of the inflight effective beam pattern in the WMAP data

Tentative evidence for statistical anisotropy in the Wilkinson Microwave Anisotropy Probe data was alleged to be due to 'insufficient handling of beam asymmetries'. In this paper, we investigate this issue and develop a method to estimate the shape of the inflight effective beam, particularly the asymmetry and azimuthal orientation. We divide the whole map into square patches and exploit the information in the Fourier space. For patches containing bright extragalactic point sources, we can directly estimate their shapes, from which the inflight effective beam can be estimated. For those without, we estimate the pattern from iso-power contours in two-dimensional Fourier space. We show that the inflight effective beam convolving the signal is indeed non-symmetric for most of the sky, and it is not randomly oriented. Around the ecliptic poles, however, the asymmetry is smaller due to the averaging effect from different orientations of the beam from the scan strategy. The orientations of the effective beam with significant asymmetry are parallel to the lines of ecliptic longitude. In the foreground-cleaned Internal Linear Combination map, however, the systematics caused by beam effect is significantly lessened.

79 ASTRONOMY AND ASTROPHYSICS↗

Reversible Electron-Beam Patterning of Colloidal Nanoparticles at Fluid Interfaces

The directed self-assembly of colloidal nanoparticles (NPs) using external fields guides the formation of sophisticated hierarchical materials but becomes less effective with decreasing particle size. As an alternative, electron-beam-driven assembly offers a potential avenue for targeted nanoscale manipulation, yet remains poorly controlled due to the variety and complexity of beam interaction mechanisms. Here, we investigate the beam–particle interaction of silica NPs pinned to the fluid–vacuum interface of ionic liquid droplets. In these experiments, scanning electron microscopy of the droplet surface resolves NP trajectories over space and time while simultaneously driving their reorganization. With this platform, we demonstrate the ability to direct particle transport and create transient, reversible colloidal patterns on the droplet surface. By tuning the beam voltage, we achieve precise control over both the strength and sign of the beam–particle interaction, with low voltages repelling particles and high voltages attracting them. This response stems from the formation of well-defined solvent flow fields generated from trace radiolysis of the ionic liquid, as determined through statistical analysis of single-particle trajectories under varying solvent composition. Altogether, electron-beam-guided assembly introduces a versatile strategy for nanoscale colloidal manipulation, offering new possibilities for the design of dynamic, reconfigurable systems with applications in adaptive photonics and catalysis.

36 MATERIALS SCIENCE↗

Nanoscale dynamics during self-organized ion beam patterning of Si. I. Ar + bombardment

X-ray photon correlation spectroscopy (XPCS) is used to investigate the fluctuation dynamics during self- organized nanopatterning of silicon by Ar + bombardment at 65° polar angle. Rich structure is observed in the development of the correlation dynamics as seen in the evolving correlation time τ(q || ) and fluctuation relaxation exponent n(q || ). Furthermore, on length scales of the ripple structure, local structure becomes ever more long lived as coarsening progresses. In addition, τ (q || ) develops a peak on length scales corresponding to the ripple wavelength. As patterning progresses, correlation times become asymmetric between the positive and negative directions, suggesting the possibility of different dynamics on the slopes facing toward and away from the ion beam. Relaxation exponents show evolution from linear dynamics at early times to compressed exponential relaxation at low wave numbers and stretched exponential relaxation at high wave numbers. Compressed exponential behavior is reminiscent of stress relaxation processes observed in glasses.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗