SEARCH · Search NASA

Results for “pblh”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

12 records

All sources NASA NTRS DOE OSTI

NASA NTRS2018

Relationships Between the Planetary Boundary Layer Height and Surface Pollutants Derived from Lidar Observations over China: Regional Pattern and Influencing Factors

The frequent occurrence of severe air pollution episodes in China has been a great concern and thus the focus of intensive studies. Planetary boundary layer height (PBLH) is a key factor in the vertical mixing and dilution of near-surface pollutants. However, the relationship between PBLH and surface pollutants, especially particulate matter (PM) concentration across China, is not yet well understood. We investigate this issue at 1600 surface stations using PBLH derived from space-borne and ground-based lidar, and discuss the influence of topography and meteorological variables on the PBLH–PM relationship. Albeit the PBLH–PM correlations are roughly negative for most cases, their magnitude, significance, and even sign vary considerably with location, season, and meteorological conditions. Weak or even uncorrelated PBLH–PM relationships are found over clean regions (e.g., Pearl River Delta), whereas nonlinearly negative responses of PM to PBLH evolution are found over polluted regions (e.g., North China Plain). Relatively strong PBLH–PM interactions are found when the PBLH is shallow and PM concentration is high, which typically corresponds to wintertime cases. Correlations are much weaker over the highlands than the plains regions, which may be associated with lighter pollution loading at higher elevations and contributions from mountain breezes. The influence of horizontal transport on surface PM is considered as well, manifested as a negative correlation between surface PM and wind speed over the whole nation. Strong wind with clean upwind air plays a dominant role in removing pollutants, and leads to obscure PBLH–PM relationships. A ventilation rate is used to jointly consider horizontal and vertical dispersion, which has the largest impact on surface pollutant accumulation over the North China Plain. As such, this study contributes to improved understanding of aerosol–planetary boundary layer (PBL) interactions and thus our ability to forecast surface air pollution.

Su, Tianning↗

NASA NTRS2019

A New Method to Retrieve the Diurnal Variability of Planetary Boundary Layer Height from Lidar Under Different Thermodynamic Stability Conditions

The planetary boundary layer height (PBLH) is an important parameter for understanding the accumulation of pollutants and the dynamics of the lower atmosphere. Lidar has been used for tracking the evolution of PBLH by using aerosol backscatter as a tracer, assuming aerosol is generally well-mixed in the PBL; however, the validity of this assumption actually varies with atmospheric stability. This is demonstrated here for stable boundary layers (SBL), neutral boundary layers (NBL), and convective boundary layers (CBL) using an 8-year dataset of micropulse lidar (MPL) and radiosonde (RS) measurements at the ARM Southern Great Plains, and MPL at the GSFC site. Due to weak thermal convection and complex aerosol stratification, traditional gradient and wavelet methods can have difficulty capturing the diurnal PBLH variations in the morning and forenoon, as well as under stable conditions generally. A new method is developed that combines lidar-measured aerosol backscatter with a stability dependent model of PBLH temporal variation (DTDS). The latter helps “recalibrate” the PBLH in the presence of a residual aerosol layer that does not change in harmony with PBL diurnal variation. The hybrid method offers significantly improved PBLH detection, with better correlation and smaller biases, under most thermodynamic conditions, especially for SBL and CBL. Relying on the physical process of PBL diurnal development, different schemes are developed for growing, maintenance, and decaying periods. Comprehensive evaluation of this new method shows much better tracking of diurnal PBLH variation and significantly smaller biases under various pollution levels.

Tianning Su↗

NASA NTRS2021

Determining Planetary Boundary Layer Height by Micro-pulse Lidar with Validation by UAV Measurements

Planetary boundary layer height (PBLH) is often used to characterize the structure of the lower atmosphere. Aerosol lidar, a ground-based remote sensing method, provides the vertical distribution of aerosol at a high temporal resolution observation data, from which, the PBL structure and the position of the PBL top can be comprehensively studied. PBLH determination with lidar data depends primarily on the characteristic turbulent motions in the atmosphere and the geophysical location. However, lidar determination of PBLH over densely populated subtropical locations has rarely been discussed; thus, developing retrieval techniques suitable to these areas is necessary. In this study, four PBLH determination methods (Gradient, δ–threshold, Haar wavelet transform, and hybrid image processing) are applied to estimate the PBLH from lidar observations over an urban area in East Asia, and one—the Gradient method—relied on potential temperature measurements from an unmanned aerial vehicle (UAV) flights to validate our results. Our results indicate that a combination of the gradient method and δ-threshold method can provide better results, in terms of diurnal pattern, than using either method individually. Furthermore, the Haar wavelet and the Hybrid image processing can detect the PBL development comparably well, but both methods are dependent on their initial conditions and optimized algorithm settings. In addition, the accompanying UAV observations are conclusively shown to have a high degree of efficacy for validating the lidar data. This research highlights that a combination of PBLH determination methods can better describe the PBLH evolution throughout a day in some cases, while in others less common determination methods are proving useful, and a suite of retrieval methods should still be explored for precisely mapping the PBL in densely populated subtropical areas.

Yueh-Chen Wang↗

NASA NTRS2021

PBL Height from AIRS, GPS RO, and MERRA-2 Products in NASA GES DISC and Their 10 Year Seasonal Mean Intercomparison

Within the planetary boundary layer (PBL), surface forcing response, drag, turbulence, and vertical mixing are important processes and play a more critical role here than in the overlying “free atmosphere”. The PBL Height (PBLH) is an important parameter in climate models, weather forecasts, and air quality prediction. The NASA Goddard Earth Sciences Data and Information Services Center (GES DISC) provides data processing, archiving, and distribution services for numerous Earth science products. PBLH is a parameter in three products served by GES DISC, which are from the Atmospheric Infrared Sounder (AIRS), the Global Positioning System (GPS) radio occultation (RO) experiment, and the NASA reanalysis product Modern-Era Retrospective analysis for Research and Applications – 2 (MERRA-2). These products have different spatial and temporal resolutions and coverages, and their PBLH definitions are also different. To better serve the PBL research community, we have summarized the specifications of these products. A ten-year seasonal mean intercomparison is also conducted to provide further guidance to users. The intercomparison results show that MERRA-2 has a much shallower PBL than AIRS and GPS RO. An experimental study indicates the different PBLH definition in MERRA-2 caused smaller values of PBLH. The improvement of the water vapor retrieval in AIRS version 7 over version 6 results in the version 7 PBLH agreeing better with GPS RO and MERRA-2 than version 6, especially near the equator and low latitudes.

Feng Ding↗

NASA NTRSDate not supplied

Assimilation of PBL Height Data from Multiple Observing Systems in the GEOS System for Global PBL Height Analysis and Monitoring System

The Goddard Earth Observing System (GEOS) developed by the NASA Global Modeling and Assimilation Office provides the critical capability to assimilate a wide range of observations in producing a comprehensive PBL estimate consistent with model physics and observations. To generate global Planetary Boundary Layer height (PBLH) analysis and monitor PBLH data online, we have developed strategy and infrastructure for PBLH data assimilation in the GEOS system and ingested PBLH data derived from multiple observing systems including radiosonde, space- and ground-based LiDAR, and GNSS RO, and implemented corresponding thinning and quality control procedures. The evaluation of departures of model PBLH simulations from PBLH data for the period of 9 days in Aug 2015 will be presented, and different features of space-based backscattered-based PBLHs will be discussed.

Eun-Gyeong Yang↗

NASA NTRS2021

Assimilation of Lidar Planetary Boundary Layer Height Observations

Lidar backscatter and wind retrievals of the planetary boundary layer height (PBLH) are assimilated into 22 hourly forecasts from the NASA Unified - Weather and Research Forecast (NU-WRF) model during the Plains Elevated Convection Convection at Night (PECAN) campaign on July 11, 2015 in Greensburg, Kansas, using error statistics collected from the model profiles to compute the necessary covariance matrices. Two separate forecast runs using different PBL physics schemes were employed, and comparisons with 6 independent radiosonde profiles were made for each run. Both of the forecast runs accurately predicted the PBLH and the state variable profiles within the planetary boundary layer during the early morning, and the assimilation had a small impact during this time. In the late afternoon, the forecast runs showed decreased accuracy as the convective boundary layer developed. However, assimilation of the Doppler lidar PBLH observations were found to improve the temperature and V velocity profiles relative to independent radiosonde profiles. Water vapor was overcorrected, leading to increased differences with independent data. Errors in the U velocity were made slightly larger. The computed forecast error covariances between the PBLH and state variables were found to rise in the late afternoon, leading to the larger improvements in the afternoon. This work represents the first effort to assimilate PBLH into forecast states using ensemble methods.

Andrew Tangborn↗

NASA NTRS2018

Analysis of the Planetary Boundary Layer Height During DISCOVER-AQ Baltimore–Washington, D.C., with Lidar and High-Resolution WRF Modeling

The daytime planetary boundary layer (PBL) was examined for the Deriving Information on Surface Conditions from Column and Vertically Resolved Observations Relevant to Air Quality (DISCOVER-AQ) Baltimore (Maryland)–Washington, D.C., campaign of July 2011 using PBL height (PBLH) retrievals from aerosol backscatter measurements from ground-based micropulse lidar (MPL), the NASA Langley Research Center airborne High Spectral Resolution Lidar-1 (HSRL-1), and the Cloud–Aerosol Lidar with Orthogonal Polarization (CALIOP) on the Cloud–Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO) satellite. High-resolution Weather Research and Forecasting (WRF) Model simulations with horizontal grid spacing of 1 km and different combinations of PBL schemes, urban parameterization, and sea surface temperature inputs were evaluated against PBLHs derived from lidars, ozonesondes, and radiosondes. MPL and WRF PBLHs depicted a growing PBL in the morning that reached a peak height by midafternoon. WRF PBLHs calculated from gridded output profiles generally showed more rapid growth and higher peak heights than did the MPLs, and all WRF–lidar differences were dependent on model configuration, PBLH calculation method, and synoptic conditions. At inland locations, WRF simulated an earlier descent of the PBL top in the afternoon relative to the MPL retrievals and radiosonde PBLHs. At Edgewood, Maryland, the influence of the Chesapeake Bay breeze on the PBLH was captured by both the ozonesonde and WRF data but generally not by the MPL PBLH retrievals because of generally weaker gradients in the aerosol backscatter profile and limited normalized relative backscatter data near the top height of the marine layer.

Hegarty, Jennifer D.↗

NASA NTRSDate not supplied

Dynamic Adjustment of Model Parameters Using Assimilated Boundary Layer Height

The NASA Global Modeling and Assimilation Office is exploring the assimilation of boundary layer height (PBLH) derived from a variety of observations, including radiosondes, GNSS-RO, space- and ground-based lidar, and radar wind profilers. Previous work using the Goddard Earth Observing System (GEOS) has shown that within the lower troposphere, the representation of thermodynamic structure is strongly affected by model parameterizations. In assimilation experiments, parameterizations can compensate for analysis thermodynamic increments and reduce the observation information carried forward in time. To mitigate this effect, the present study explores a dynamic parameter adjustment based on the PBLH analysis field. The PBLH analysis increment is used to adjust model parameters that influence the depth of parameterized boundary layer mixing in both stable and convective regimes. Replay (nudging) experiments and cycled data assimilation experiments are used to evaluate the approach. The parameter adjustment is shown to reduce model compensation of the analysis thermodynamic tendencies and bring model parameterized mixing depths into closer agreement with observed PBLH.

Nathan Arnold↗

NASA NTRSDate not supplied

Evaluation of Planetary Boundary Layer Structure from NASA Global Modeling and Assimilation Office’s Next Retrospective Analysis Product MERRA-21C

The Planetary Boundary Layer (PBL) is a complex interface between Earth’s surface and the atmosphere with high spatiotemporal variability in its characteristics, and accurate simulation and observation of the PBL has proven to be a challenge. In this study, we evaluate PBL structures from NASA Global Modeling and Assimilation Office (GMAO)’s next retrospective analysis product: the Goddard Earth Observing System Retrospective Analysis of the early 21st Century (GEOS-R21C), with 25-km horizontal resolution. The GEOS-R21C incorporates a wide range of observing systems and various improvements over previous GMAO reanalysis. We compare the PBL thermodynamic structure as well as PBL Height (PBLH) from GEOS-R21C with various PBL observations. For PBLH, definitions are different depending on each observing system. PBLHs derived from radiosonde observations and Global Navigation Satellite System Radio Occultation (GNSS RO) are based on bulk Richardson number and refractivity gradient, respectively. The results of the evaluation of PBL structure from GMAO’s next retrospective analysis product will be presented. In addition, comparison between near-real-time (NRT) commercial and NASA commercial GNSS RO PBLH will also be discussed.

Eun-Gyeong Yang↗

NASA NTRSDate not supplied

Improving Boundary Layer Data Assimilation in the NASA GEOS System

The Goddard Earth Observing System (GEOS) developed by the NASA Global Modeling and Assimilation Office assimilates a wide range of observations to support various NASA Earth Science missions. As Measurement of planetary boundary layer (PBL) was designated as an incubation program by the 2018 Decadal Survey, we have aimed to improve PBL thermodynamic structure using data from multiple observing systems. In particular, we have developed strategies and infrastructure to assimilate PBL height (PBLH) data derived from radiosondes, GNSS radio occultation, space-based lidar (CALIPSO, CATS, IceSat-2), ground-based lidar (MPLNET) and radar wind profilers to produce global PBL height analyses. We have also explored methods to better represent capping inversions by using PBLH data together with other observations in the GEOS to adjust background error covariance and enhance model PBL parameterization performance.

Y. Zhu↗

NASA NTRS2016

Evaluation of Current Planetary Boundary Layer Retrieval Capabilities from Space

The PBL over land remains a significant gap in our water and energy cycle understanding from space. This work combines unique NASA satellite and model products to demonstrate the ability of current sensors (advanced IR sounding and lidar) to retrieve PBL properties and in turn their potential to be used globally to evaluate and improve weather and climate prediction models. While incremental progress has been made in recent AIRS retrieval versions, insufficient vertical resolution remains in terms of detecting PBL properties. Lidar shows promise in terms of detecting vertical gradients (and PBLh) in the lower troposphere, but daytime conditions over land remain a challenge due to noise, and their coverage is limited to approximately 2 weeks or longer return times.

AIRS↗

NASA NTRS2020

The Relationship Between MAIAC Smoke Plume Heights and Surface PM

Biomass burning is a source of fine particulate matter (PM2.5) air pollution, which adversely impacts human health. However, quantifying the health effects from biomass burning PM2.5 is difficult. Monitoring networks generally lack the spatial density needed to capture the heterogeneity of biomass burning smoke. Satellite aerosol optical depth (AOD) can be used to fill spatial gaps but does not distinguish surface‐level aerosols. Plume height (PH) observations may provide constraints on the vertical distribution of smoke and its impact on surface concentrations. We assessed PH characteristics from Multi‐Angle Implementation of Atmospheric Correction (MAIAC) and evaluated its correlation with colocated PM2.5 and AOD measurements. PH is generally highest over the western United States. The ratio PM2.5:AOD generally decreases with increasing PH:PBLH (planetary boundary layer height), showing that PH has the potential to refine surface PM2.5 estimates for collections of smoke events.

satellite retrieved smoke plume heights↗