Search NASA⌕ Search

SEARCH · Search NASA

Results for “phase field”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Phase-field model for isothermal phase transitions in binary alloys

A new phase field model is described which models isothermal phase transitions between ideal binary alloy solution phases. Equations are developed for the temporal and spatial variation of the phase field, which describes the identity of the phase, and of the composition. An asymptotic analysis, as the gradient energy coefficient of the phase field becomes small, was conducted. From the analysis, it is shown that the model recovers classical sharp interface models of this situation when the interfacial layers are thin, and they show how to relate the parameters appearing in the phase field model to material and growth parameters in real systems. Further, three stages of temporal evolution are identified: the first corresponding to interfacial genesis which occurs very rapidly; the second to interfacial motion controlled by the local energy difference across the interface and diffusion; the last taking place on a long time scale in which curvature effects are important and which correspond to Ostwald ripening. The results of the numerical calculations are presented.

Wheeler, A. A.↗
DOE OSTI2021

Phase-field simulations of fission gas bubbles in high burnup UO2 during steady-state and LOCA transient conditions

To improve the economics of commercial nuclear energy generation, U.S. utilities are currently seeking licensing approval to operate UO2 fuel to higher burnups. One significant safety issue that must be addressed to obtain approval is the potential for fine fragmentation/pulverization of the fuel during a loss-of-coolant accident (LOCA). It has been hypothesized this is caused by the rapid increase of pressure in fission gas bubbles in the high burnup region of the fuel. To better understand this phenomenon, a novel phase-field model of the fission gas bubble microstructure in UO2 has been developed and implemented in Idaho National Laboratory's Marmot application for phase-field simulation of nuclear materials. Simulations of bubble growth in the high burnup region during steady-state conditions showed that initially overpressurized bubbles decreased in pressure during growth, but still remained above equilibrium pressure. During a LOCA transient, simulations of bubbles in the high burnup region showed that bubble size did not change significantly, and the pressure increase due to the transient was calculated and passed to a phase-field model of fracture.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

From classical thermodynamics to phase-field method

Phase-field method is a density-based computational method at the mesoscale for modeling and predicting the temporal microstructure and property evolution during materials processes. The focus of this article is on connecting the most common phase-field equations to the very basic first and second laws of classical thermodynamics through rudimentary irreversible thermodynamics. It briefly discusses the relations of the continuum phase-field equations to their counter parts at the microscopic and atomic levels. It attempts to clarify the contributions of long-range elastic, electrostatic, and magnetic interactions to domain structure evolution during structural, ferroelectric, and ferromagnetic phase transformations by separating order parameter changes due to the presence of quasi-static fields and those arising from phase transformations. A few examples are presented to demonstrate the possibility of employing the phase-field method to provide guidance to designing materials for optimum properties or discovering novel mesoscale phenomena or new materials functionalities. Here, the article ends with a brief perspective on a number of potential future directions on the development and applications of phase-field method beyond its traditional applications to structural alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Bifurcation Analysis Reveals Solution Structures of Phase Field Models

The phase field method is playing an increasingly important role in understanding and predicting morphological evolution in materials and biological systems. Here, in this study, we develop a new analytical approach based on the bifurcation analysis to explore the mathematical solution structure of phase field models. Revealing such solution structures not only is of great mathematical interest but also may provide guidance to experimentally or computationally uncover new morphological evolution phenomena in materials undergoing electronic and structural phase transitions. To elucidate the idea, we apply this analytical approach to three representative phase field equations: the Allen-Cahn equation, the Cahn-Hilliard equation, and the Allen-Cahn-Ohta-Kawasaki system. The solution structures of these three phase field equations are also verified numerically by the homotopy continuation method.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Hydro-chemo-mechanical phase field formulation for corrosion induced cracking in reinforced concrete

Steel corrosion induced cracking in reinforced concrete structures is often caused by volumetric straining at the steel-concrete interface. This volumetric strain is mainly controlled by the rate of generation of corrosion product, which depends on the diffusion of Cl{sup −} and dissolved O{sub 2} as well as the chemical reaction at the steel-concrete interface. While many numerical modeling techniques have been proposed to tackle this complex phenomenon, most have been limited to using staggered solution schemes, where the diffusion, chemical reaction, mechanical strain, and crack fields are solved for separately. Unfortunately, such approaches introduce numerical errors that can lead to unrealistic predictions. Therefore, a coupled solution, is needed to remove the formulation induced errors and understand this complex phenomenon. To provide a unifying solution framework for corrosion induced cracking in reinforced concrete, a phase field formulation is presented and implemented with FEM algorithms. The governing equations are derived from the system's free energy and Fick's law of diffusion. The proposed formulation was first validated in 1D by comparing the modeling results with the semi-analytical solution approximated via Laurent series to avoid singularities in the complex domain. 2D plane strain solutions to the embedded rebar undergoing corrosion induced cracking with pre-cracks are also presented and compared with the approximated solutions from linear elastic fracture mechanics theory (LEFM). The modeling of crack propagation enabled by the proposed formulation is also presented along with parametric studies to reveal the roles of the fracture toughness and permeability of the concrete on the corrosion induced cracking. A case study was also conducted on H-pile steel with concrete jackets to demonstrate the feasibility of modeling corrosion induced fracture in reinforced concrete structures with complex steel-concrete interfaces.

36 MATERIALS SCIENCE↗
DOE OSTI2023

A Deep Learning Pipeline for Optimizing Large-scale Phase Field Simulations

Phase field (PF) simulations are computationally expensive but remain a key analysis tool to understand the complex mechanisms of additive manufacturing (AM) processes. Each PF simulation-aided analysis requires thousands of node hours on leadership-class supercomputers. One of the main goals of these analyses is the study of microstructure evolution during the build process which begins with the onset of nucleation. Nucleation occurs under certain thermomechanical conditions which are not known a priori and many PF simulations are required to identify ranges of input thermo-mechanical parameters that can result in the onset of nucleation. Since many of the simulations do not result in nucleation, an analysis campaign often ends up wasting tremendous amounts of precious computing resources executing nucleation-absent simulations. The goal of this work is to design and train deep learning models to inform a PF simulation about the likelihood of the occurrence of nucleation in a future simulation time-step based on the state summary over a finite number of past time-steps of a running simulation. If the prediction determines that the running simulation is unlikely to reach nucleation in the allotted time, then its execution is stopped immediately ultimately resulting in vast reduction in wasted computations when accrued over all the PF simulations typically performed in a single or multiple analysis campaign(s). The paper presents the performance of a machine learning pipeline that uses a convolutional neural network (CNN) model to learn an embedding which is then used with a self-attention network to build a multi-task deep learning model to predict the likelihood of nucleation. The model also predicts the input parameters used in a simulation. Performance is compared with a baseline pipeline that uses an off-the-shelf LeNet-5 model to learn the initial embedding. Despite their smaller size, performance results indicate significant improvement in accuracy of the proposed models compared to the larger baseline models.

Kannan, Ramakrishnan {ramki}↗
DOE OSTI2020

Defect cluster and nonequilibrium gas bubble associated growth in irradiated UMo fuels – a cluster dynamics and phase field model

Irradiation examination shows that gas bubble swelling kinetics is much faster after irradiation-induced recrystallization than that prior recrystallization in UMo fuels. It implies that gas bubbles in coarse grains and small recrystallized grains have different growth behavior. In this work, a phase-field model of gas bubble evolution integrating microstructure dependent cluster dynamics has been developed, for the first time, to study the gas bubble swelling behavior in the recrystallization zone of UMo fuels. Generation, diffusion, reaction, sink, emission and clustering of vacancies and interstitials are described by the cluster dynamics model while a phase-field model is used to describe the evolution of non-equilibrium gas bubbles including nucleation and growth. With the coupled model, the effect of defect generation rate, clustering rate, interstitial emission and sink rates on grain boundaries on the gas bubble evolution are systematically simulated. A set of model parameters (defect generation rate, clustering rate, interstitial emission and sink rates) is determined by comparing measured and simulated gas bubble swelling kinetics. The results demonstrate that interstitial clustering is one of the important physical mechanisms which results in a fast gas bubble swelling kinetics in the recrystallization zone. The developed model can also be extended to study the associated growth of defect and second phase precipitates often observed in irradiated materials.

Hu, Shenyang↗
DOE OSTI2021

Precipitate growth kinetics under inhomogeneous concentration fields using a phase-field model

We investigate precipitation dynamics in the presence of a local solute gradient using phase-field simulations. During the homogenization heat treatment of the solidified Inconel 718 alloy, high Nb concentration within the Laves phases or at the core of the secondary arms results in Nb diffusion into the γ matrix. The volume fraction and spatial distribution of precipitation during subsequent annealing can be controlled by tailoring the Nb concentration gradient in the matrix during homogenization. We use a surrogate Ni-Fe-Nb alloy for Inconel 718 to explore the growth dynamics of δ precipitates related to the local Nb concentration levels. The simulations indicate that in the presence of a Nb concentration gradient the growth rate of δ precipitates is higher than in a matrix of uniform average Nb concentration. The higher growth rate is a result of the higher local thermodynamic driving force at the interface between the solute-rich matrix and the δ interface. Here, we propose a phenomenological model to describe the diffusion-controlled growth kinetics of the δ phase under a solute concentration gradient.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Comparison of excess free energy at an interface according to the applied interpolation scheme for elasticity: A phase-field method

Phase-field modeling is an effective simulation technique for modeling microstructure evolution of elastically anisotropic systems. To introduce the elastic energy contribution in a phase field model, an interpolation scheme is used to define the mechanical properties within the phases and across the continuous interface. Several existing interpolation schemes introduce a potential excess elastic energy at the interface, which undesirable effect on microstructure evolution needs to be evaluated. In this study, we focused on three interpolation schemes including Khachaturyan’ scheme (KHS), Voigt–Taylor’s scheme (VTS), and Steinbach–Apel’s scheme (SAS). Comparisons of these schemes’ performances were performed in three configuration types using the MOOSE (Multiphysics Object-Oriented Simulation Environment) framework: bi-crystal, isotropic particle-matrix and anisotropic particle-matrix. The contribution of excess elastic energy on the interface energy as a function of interface width and the computational time to steady-state were evaluated in these three configurations. SAS introduces the lowest excess elastic energy contribution and the VTS has the biggest contribution amongst the considered schemes. Moreover, when modeling precipitation in an anisotropic elastic material, the SAS approach seems to predict more physical convex shapes during growth, making it preferable to KHS and VTS. Finally, as currently implemented, SAS requires the largest computational time and KHS requires the smallest time to reach steady-state amongst the considered schemes.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Multiphase phase-field approach for solid–solid phase transformations via propagating interfacial phase in HMX

In this study, a thermodynamically consistent multiphase phase-field theory has been formulated to describe temperature-induced solid–solid phase transformations via an interfacial phase. This theory satisfies all thermodynamic equilibrium and stability conditions. It allows us to formulate the analytical solutions of the interface profile, energy, width, and velocity for each of the propagating solid–melt and solid–solid interfaces. The formation of the intermediate melt during solid–solid phase transformation has been studied hundreds of degrees below melting temperature in the HMX energetic crystal. The effect of the penalizing term in the phase-field model and two nanoscale material parameters on the appearance and degree of disordering of intermediate melt has been analyzed for the non-equilibrium interface. The developed approach is applicable to phase transitions in geological, pharmaceutical, ferroelectric, colloidal, and superhard materials where phase transformations occur via the intermediate phase.

Roy, Arunabha M. (ORCID:000000034790726X)↗
DOE OSTI2023

Multiscale dynamics of charging and plating in graphite electrodes coupling operando microscopy and phase-field modelling

The phase separation dynamics in graphitic anodes significantly affects lithium plating propensity, which is the major degradation mechanism that impairs the safety and fast charge capabilities of automotive lithium-ion batteries. In this study, we present comprehensive investigation employing operando high-resolution optical microscopy combined with non-equilibrium thermodynamics implemented in a multi-dimensional (1D+1D to 3D) phase-field modeling framework to reveal the rate-dependent spatial dynamics of phase separation and plating in graphite electrodes. Here we visualize and provide mechanistic understanding of the multistage phase separation, plating, inter/intra-particle lithium exchange and plated lithium back-intercalation phenomena. A strong dependence of intra-particle lithiation heterogeneity on the particle size, shape, orientation, surface condition and C-rate at the particle level is observed, which leads to early onset of plating spatially resolved by a 3D image-based phase-field model. Moreover, we highlight the distinct relaxation processes at different state-of-charges (SOCs), wherein thermodynamically unstable graphite particles undergo a drastic intra-particle lithium redistribution and inter-particle lithium exchange at intermediate SOCs, whereas the electrode equilibrates much slower at low and high SOCs. These physics-based insights into the distinct SOC-dependent relaxation efficiency provide new perspective towards developing advanced fast charge protocols to suppress plating and shorten the constant voltage regime.

25 ENERGY STORAGE↗
DOE OSTI2025

Inference of phase field fracture models

The phase field approach to modeling fracture uses a diffuse damage field to represent cracks. This representation mollifies singularities that arise in computations with sharp interface models and some of the resultant difficulties in the mathematical and numerical treatment of fracture. Phase field fracture models have proven effective at representing crack propagation, branching, and merging. Specific formulations, beginning with brittle fracture, have also been shown to converge to classical solutions. Extensions to cover the range of material failure, including ductile and cohesive fracture, lead to an array of possible models. There exists a large body of literature focusing on this class of models and on the impact of model form on the predicted crack evolution. However, there have not been systematic studies into how optimal models may be chosen. Here, we take a first step in this direction by developing formal methods for identification of the best parsimonious model of phase field fracture given full-field data on the damage and deformation fields. We consider some of the main models that have been used for the degradation of elastic response due to damage and its propagation. Our approach builds upon Variational System Identification (VSI), a weak form variant of the Sparse Identification of Nonlinear Dynamics (SINDy). Furthermore, in this first communication we focus on synthetically generated data but we also consider central issues associated with the use of experimental full-field data, such as data sparsity and noise.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

3D Ferroelectric Phase Field Simulations of Polycrystalline Multi‐Phase Hafnia and Zirconia Based Ultra‐Thin Films

Abstract HfO 2 – and ZrO 2 –based ferroelectric thin films have emerged as promising candidates for the gate oxides of next‐generation electronic devices. Recent work has experimentally demonstrated that a tetragonal/orthorhombic (t/o‐) phase mixture with partially in‐plane polarization can lead to negative capacitance (NC) stabilization. However, there is a discrepancy between experiments and the theoretical understanding of domain formation and domain wall motion in these multi‐phase, polycrystalline materials. Furthermore, the effect of anisotropic domain wall coupling on NC has not been studied so far. Here, 3D phase field simulations of HfO 2 – and ZrO 2 –based mixed‐phase ultra‐thin films on silicon are applied to understand the necessary and beneficial conditions for NC stabilization. It is found that smaller ferroelectric grains and a larger angle of the polar axis with respect to the out‐of‐plane direction enhances the NC effect. Furthermore, it is shown that theoretically predicted negative domain wall coupling even along only one axis prevents NC stabilization. Therefore, it is concluded that topological domain walls play a critical role in experimentally observed NC phenomena in HfO 2 – and ZrO 2 –based ferroelectrics.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2026

Effect of magneto-mechanical synergism in the process-structure correlation in Fe–C alloys: A phase-field modeling approach

Applied magnetic fields can alter phase equilibria and kinetics in steels; however, quantitatively resolving how magnetic, chemical, and elastic driving forces jointly influence the microstructure remains challenging. We develop a quantitative magneto-mechanically coupled phase-field model for the Fe–C system that couples a CALPHAD-based chemical free energy with demagnetization-field magnetostatics and microelasticity. Here, the model reproduces single- and multi-particle evolution during the α → γ inverse transformation at 1023 K under external fields up to 20 T, including ellipsoidal morphologies observed experimentally at 8 T. Chemically driven growth is isotropic; a magnetic interaction introduces an anisotropic driving force that elongates γ precipitates along the field into ellipsoids, while elastic coherency promotes faceting, yielding elongated cuboidal or “brick-like” particles under combined magneto-elastic coupling. Growth kinetics increase with C content, and decrease with field strength and misfit strain. Multi-particle simulations reveal dipolar interaction-mediated coalescence for field-parallel neighbors and ripening for field-perpendicular neighbors. Incorporating field-dependent diffusivity from experiment slows kinetics as expected; a first-principles-motivated anisotropic diffusivity correction is estimated to be small (<2%). These results establish a process-structure link for magnetically assisted heat treatments of Fe–C alloys and provide guidance for microstructure control via chemo-magneto-mechanical synergism.

Magnetic field↗
DOE OSTI2022

The effect of stress on the migration of He gas bubbles under a thermal gradient in Fe by phase-field modeling

Here a phase-field model is parameterized to study the effect of elastic stresses on the migration of He gas bubbles in Fe under a temperature gradient. Stresses caused by the gas bubble pressure and residual stress in the Fe matrix are considered. The dependence of He bubble migration velocity on the magnitude of the residual stress, average temperature, temperature gradient, and bubble size is measured. In agreement with a theoretical model based on surface diffusion, simulation results demonstrate that He bubbles move towards the high temperature region with velocities in Fe that are orders of magnitude faster than previously reported in UO 2 . It is found that local stresses in the matrix caused by the He bubble have negligible effect on the bubble migration process; however, residual stresses in the Fe matrix, potentially caused by processing or irradiation, can modestly modify bubble kinetics through pressure dependence of the He diffusion coefficients. Compressive residual stress decreases diffusion coefficients for bulk and surface diffusion mechanisms, thus reducing the migration velocity of the gas bubble. In contrast, tensile residual stress increases the diffusion coefficients, resulting in an increase in the gas bubble migration velocity. This pressure dependence is also consistent with a theoretical model. This phase field model lays the foundation for analysis of bubble coalescence-induced fracture in He bubble-containing steels.

36 MATERIALS SCIENCE↗