Nanodomains and Their Temperature Dependence in a Phosphonium-Based Ionic Liquid: A Single-Molecule Tracking Study
Explore the source record for details and available documents.
Opare-Addo, Jemima↗
SEARCH · Search NASA
Results for “phosphonium”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Ion transport and structural dynamics in homologous ammonium and phosphonium-based room temperature ionic liquids
Charge transport and structural dynamics in a homologous pair of ammonium and phosphonium based room temperature ionic liquids (ILs) have been characterized over a wide temperature range using broadband dielectric spectroscopy and quasi-elastic light scattering spectroscopy. We have found that the ionic conductivity of the phosphonium based IL is significantly enhanced relative to the ammonium homolog, and this increase is primarily a result of a lower glass transition temperature and higher ion mobility. Additionally, these ILs exhibit pronounced secondary relaxations which are strongly influenced by the atomic identity of the cation charge center. While the secondary relaxation in the phosphonium IL has the expected Arrhenius temperature dependence characteristic of local beta relaxations, the corresponding relaxation process in the ammonium IL was found to exhibit a mildly non-Arrhenius temperature dependence in the measured temperature range—indicative of molecular cooperativity. These differences in both local and long-range molecular dynamics are a direct reflection of the subtly different inter-ionic interactions and mesoscale structures found in these homologous ILs.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Anion exchange membranes composed of a poly(2,6-dimethyl-1,4-phenylene oxide) random copolymer functionalized with a bulky phosphonium cation
A random copolymer, tris(2,4,6-trimethoxyphenyl) phosphonium functionalized poly(2,6-dimethyl-1,4-phenylene oxide) (PPO-TPQP) was cast from three different solvents: dimethyl sulfoxide (DMSO), ethyl lactate, or a 41:59 vol% mixture of DMSO and ethyl lactate. Solvents were selected via analysis of the Hansen solubility parameters to vary the phase separation of the polymer in the films. An optimized mixture of DMSO and ethyl lactate chosen for film fabrication and this film was contrasted with films cast from the neat constituent solvents. Atomic force microscopy identified domains from nanometer to tens of nanometer sizes, while the light microscopy showed features on the order of micron. SAXS revealed a cation scattering peak with a d-spacing from 7 to 15 A. Trends in conductivity and water diffusion for the membranes vary depending on the solvent from which they are cast. The mixed solvent cast membrane shows a linear Arrhenius behavior indicating fully dissociated cationic/anionic groups, and has the highest bromide conductivity of 3 mS/cm at 95% RH, 90 degrees C. The ethyl lactate cast membrane shows a linear Arrhenius relation in conductivity, but a Vogel-Tamman-Fulcher behavior in its water self-diffusion. While water increases bromide dissociation, water and bromide transport in these films seems to be decoupled. This is particularly true for the film cast from ethyl lactate.
Liu, Ye↗
Lubrication Mechanism of Phosphonium Phosphate Ionic Liquid in Nanoscale Single-Asperity Sliding Contacts
Explore the source record for details and available documents.
99 GENERAL AND MISCELLANEOUS↗
Phosphonium-Based Polyzwitterions: Influence of Ionic Structure and Association on Mechanical Properties
This manuscript describes a synthetic strategy and structure–property investigation of unprecedented phosphonium-based zwitterionic homopolymers (polyzwitterions) and random copolymers (zwitterionomers). Free radical polymerization of 4-(diphenylphosphino)styrene (DPPS) provided neutral polymers containing reactive triarylphosphines. Quantitative postpolymerization alkylation of these pendant functionalities generated a library of polymers containing various concentrations of neutral phosphines, phosphonium ions, and phosphonium sulfobetaine zwitterions. The zwitterionic homo- and copolymers exhibited significantly higher glass transition temperatures (T g ) and enhanced mechanical reinforcement in comparison to neutral and phosphonium analogues. These changes in T g and mechanical properties were attributed to nanoscale morphological domains, which formed due to electrostatic interactions between zwitterionic groups, as revealed by X-ray scattering and broadband dielectric spectroscopy (BDS). BDS revealed increased static dielectric constants (>25) for the phosphonium zwitterionomers compared to ionomeric or neutral analogues. These high static dielectric constants for the solvent-free polyzwitterions supported their stronger polarization response in comparison with polymers containing neutral phosphines and phosphonium ions, and these interactions accounted for morphological differences and enhanced mechanical behavior. This work describes a versatile strategy for modulating electrostatic interactions with tunable mechanical properties for an unprecedented family of zwitterionic polymers.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Phosphonium-Based Metal Halide Semiconductors: When a Single Atom Dictates Water and Thermal Stability
Phosphonium-based (R-P(R’) 3 + ) metal halide semiconductors (MHS) emerged recently as a promising family of materials offering enhanced water and thermal stability over conventional ammonium-based (R-NH 3 + ) MHS. Despite this performance, there is a lack of systematic studies that elucidate the origin of these features as well as the underlying optoelectronic properties. Here, we report here the synthesis of nine new 1D materials (L)PbX 3 (L= C4-P, C6-P, C6-N, P3-P, P4-P, X= I, Br), using custom made organic ligands, namely butyl(triethyl)phosphonium bromide (C4-P), hexyl(triethyl)phosphonium bromide (C6-P), benzyl(triethyl)phosphonium bromide (P3-P), benzyl(trimethyl)phosphonium bromide (P4-P), and hexyl(triethyl)ammonium bromide (C6-N). Most of the materials are water stable for over 21 months, while the assembly of the isostructural (C6-N)PbBr 3 and (C6-P)PbBr 3 allowed us to directly identify the impact of a single atom (phosphorus versus nitrogen), on water stability. Notably, the C6-P analog remains water stable for 21 months, whereas the C6-N analog dissolves in water. It was found that neither crystal packing nor the lack of hydrogen bond interactions with water is responsible for this record stability performance, challenging currently established claims on the 1 origin of water stability in MHS. All materials feature broad light emission at RT, with (P3-P)PbBr 3 exhibiting a PLQY of 22.0% ascribed to permanent traps, while electrochemical studies uncovered for the first time the redox properties and their strong potential for the sensing of per- and polyfluoroalkyl substances (PFAS) in water samples. Our work showcases the potential of these compounds for applications where thermal and water stability are interwoven, potentially rendering their (R-NH 3 + ) based counterparts obsolete.
PFAS sensing↗
Exploring Phosphonium‐Based Anion Exchange Polymers for Moisture Swing Direct Air Capture of Carbon Dioxide
This study explores the performance and stability of ammonium and phosphonium-based polymeric ionic liquids (PILs) with methyl and butyl substituents in moisture-swing direct air capture of CO 2 . The polymers are synthesized with chloride counterions, followed by ion exchange to the bicarbonate ion, and tests for CO 2 capture capacity and stability under cyclic wet–dry conditions. The phosphonium polymer with methyl substituents [PVBT-MeP] demonstrates the highest CO 2 capture capacity at ≈510 µmol g⁻¹, attributed to minimal steric hindrance and stronger ion pairing with bicarbonate. However, oxidative degradation is detected by 31 P NMR spectroscopy after the moisture swing experiment, with the appearance of a phosphine oxide peak at 61.28 ppm, which indicates phosphorus oxidation as the primary degradation pathway. In contrast, the ammonium polymer with butyl substituents [PVBT-BuN] exhibits the highest stability, showing no degradation over five moisture swing cycles. Additional stability experiments in 0.5 m KHCO 3 solutions reveal no degradation for any PIL, suggesting that oxidative degradation is driven by dynamic acid-base reactions during the moisture swing cycles in the air. Furthermore, these findings reveal the potential of phosphonium-based PILs for moisture-swing direct air capture, achieving high capacity while highlighting the need for optimized stability through counterion and structural design.
36 MATERIALS SCIENCE↗
Ionic liquids composed of phosphonium cations and organophosphate, carboxylate, and sulfonate as lubricant antiwear additives
Oil-soluble phosphonium-based ionic liquids (ILs) have recently been reported as potential ashless lubricant additives. This study is to expand the IL chemistry envelope and to achieve fundamental correlations between the ion structures and ILs’ physiochemical and tribological properties. Here we present eight ILs containing two different phosphonium cations and seven different anions from three groups: organophosphate, carboxylate, and sulfonate. The oil solubility of ILs seems largely governed by the IL molecule size and structure complexity. When used as oil additives, the ranking of effectiveness in wear protection for the anions are: organophosphate > carboxylate > sulfonate. All selected ILs outperformed a commercial ashless anti-wear additive. Surface characterization from the top and the cross-section revealed the nanostructures and compositions of the tribo-films formed by the ILs. Some fundamental insights were achieved: branched and long alkyls improve the IL’s oil solubility, anions of a phosphonium-phosphate IL contribute most phosphorus in the tribofilm, and carboxylate anions, though free of P, S, N, or halogen, can promote the formation of an anti-wear tribofilm.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Understanding the impact of the central atom on the ionic liquid behavior: Phosphonium vs ammonium cations
The influence of the cation's central atom in the behavior of pairs of ammonium- and phosphonium-based ionic liquids was investigated through the measurement of densities, viscosities, melting temperatures, activity coefficients at infinite dilution, refractive indices, and toxicity against Vibrio fischeri. All the properties investigated are affected by the cation's central atom nature, with ammonium-based ionic liquids presenting higher densities, viscosities, melting temperatures, and enthalpies. Activity coefficients at infinite dilution show the ammonium-based ionic liquids to present slightly higher infinite dilution activity coefficients for non-polar solvents, becoming slightly lower for polar solvents, suggesting that the ammonium-based ionic liquids present somewhat higher polarities. In good agreement these compounds present lower toxicities than the phosphonium congeners. To explain this behavior quantum chemical gas phase DFT calculations were performed on isolated ion pairs at the BP-TZVP level of theory. Electronic density results were used to derive electrostatic potentials of the identified minimum conformers. Electrostatic potential-derived CHelpG and Natural Population Analysis charges show the P atom of the tetraalkylphosphonium-based ionic liquids cation to be more positively charged than the N atom in the tetraalkylammonium-based analogous IL cation, and a noticeable charge delocalization occurring in the tetraalkylammonium cation, when compared with the respective phosphonium congener. It is argued that this charge delocalization is responsible for the enhanced polarity observed on the ammonium based ionic liquids explaining the changes in the thermophysical properties observed.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Molecular insights into ionic liquid/aqueous interface of phosphonium based phase-separable ionic liquids
Phosphonium based phase-separable ionic liquids (PSILs) are promising green solvents for dissolution of cellulose and lignin, a necessary step for conversion of biomass to fuels and chemicals. The knowledge of interfacial behavior of ionic liquid/solvent systems is critical for designing efficient separation processes. Here, molecular dynamics simulations are carried out for aqueous interface of tetraalkylphosphonium ionic liquids with chloride and acetate as anions to investigate IL miscibility with water. The transition zone from miscible to immiscible behavior was observed for alkyl chain lengths of 6 to 8. Emulsion phase was observed for [P8888]+ ion and multiple IL/water interface was observed for [P12121212]+ phosphonium cation. IL/water interface is observed to be enriched with solvated anions with phosphorous atom oriented towards the aqueous phase. The potential of mean force calculations suggest that as the alkyl chain of the phosphonium cations increase, so does the driving force for aggregation of cations in the aqueous phase. Due to the difference in the molecular shape and size, anions are better solvated by the water molecules, and these ions diffuse into the aqueous phase. Furthermore, the analysis of selected pair interactions provides insights into the nature of intermolecular forces and the role of the alkyl side chains on the interfacial properties.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Phosphonium chloride for thermal storage
Development of systems for storage of thermal energy is discussed. Application of phosphonium chloride for heat storage through reversible dissociation is described. Chemical, physical, and thermodynamic properties of phosphonium chloride are analyzed and dangers in using phosphonium chloride are explained.
Sutton, J. G.↗
Cyclic phosphonium ionic liquids
Ionic liquids (ILs) incorporating cyclic phosphonium cations are a novel category of materials. We report here on the synthesis and characterization of four new cyclic phosphonium bis(trifluoromethylsulfonyl)amide ILs with aliphatic and aromatic pendant groups. In addition to the syntheses of these novel materials, we report on a comparison of their properties with their ammonium congeners. These exemplars are slightly less conductive and have slightly smaller self-diffusion coefficients than their cyclic ammonium congeners.
phospholanium↗
Phosphonium-Organophosphate Ionic Liquids as Lubricant Additives: Effects of Cation Structure on Physicochemical and Tribological Characteristics
In our previous work we suggest great potential for a phosphonium-organophosphate ionic liquid (IL) as an antiwear lubricant additive. In this study, a set of five ILs were carefully designed and synthesized, with identical organophosphate anions but dissimilar phosphonium cations, to allow systematic investigation of the effects of cation alkyl chain length and symmetry on physicochemical and tribological properties. Symmetric cations with shorter alkyl chains seem to increase the density and thermal stability due to closer packing. On the other hand, either higher cation symmetry or longer alkyl moieties induce a higher viscosity, though the viscosity index is dependent more on molecular mass than on symmetry. While a larger cation size generally increases an IL’s solubility in nonpolar hydrocarbon oils, six-carbon seems to be the critical minimum alkyl chain length for high oil miscibility. Both the two ILs, that are mutually oil miscible, have demonstrated promising lubricating performance at 1.04% treat rate, though the symmetric-cation IL moderately outperformed the asymmetric-cation IL. Moreover, characterizations on the tribofilm formed by the best-performing symmetric-cation IL revealed the film thickness, nanostructure, and chemical composition. Our results provide fundamental insights for future molecular design in developing oil-soluble ILs as lubricant additives.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Controlled Design of Phase- and Size-Tunable Monodisperse Ni 2 P Nanoparticles in a Phosphonium-Based Ionic Liquid through Response Surface Methodology
Nanoparticles of nickel phosphide are finding wide ranging utility as catalysts for hydrodesulfurization, hydrogen evolution reaction, and hydrodeoxygenation of bio-oils. Herein, we present a methodology to tailor monodisperse nickel phosphide nanoparticles in terms of size and phase through the use of a statistical response surface methodology. Colloidal nickel phosphide nanoparticles were synthesized by replacing octadecene (ODE), a commonly used organic solvent, by a more sustainable phosphonium-based ionic liquid (IL). The replacement of ODE with the phosphonium-based IL resulted in faster crystallization at lower temperatures to yield phase-pure, monodisperse Ni2P nanoparticles. Using a first-order design, the PPh3/Ni precursor ratio was identified as the most critical factor influencing the resulting size and phase of the nanoparticles. Optimization using a Doehlert matrix for second-order design yielded a second-degree polynomial equation used to predict the mean diameter of the nanoparticles (over a range of 4-12 nm) as a function of the PPh3/Ni precursor ratio and the temperature used during synthesis. The resulting model was validated by performing reactions using randomly chosen sets of conditions; the experimentally determined nanoparticle sizes were in excellent agreement with the theoretical sizes predicted by our model. This demonstrates the utility of a multivariate experimental design as a powerful tool in the development of synthetic strategies toward the preparation of colloidal nanoparticles with highly controlled size, size distribution, and phase.
36 MATERIALS SCIENCE↗
Structure of Novel Phosphonium-Based Ionic Liquids with S and O Substitutions from Experiments and a Mixed Quantum-Classical Approach
This article presents experimental characterization information and synchrotron X-ray scattering measurements on a set of novel O- and S-substituted phosphonium-based ionic liquids (ILs) all coupled with the bis(fluorosulfonyl)imide (FSI-) anion. The ILs include the ethoxyethyltriethylphosphonium (P 222(2O2) + ) and triethyl[2-(ethylthio)ethyl]phosphonium (P 222(2S2) + ) cations, and we contrast results on these with those for unsubstituted triethylpentylphosphonium (P 2225 + ). The article also introduces a physics-based protocol that combines classical force field studies on larger simulation boxes with classical and first-principles studies on smaller boxes. The method produces significantly improved S(q) functions in the regime which in prior publications we have associated with inter- and intraionic adjacency correlations. By understanding which shorter-range structural changes improve S(q) in the q-regime of interest, we are also able to pinpoint specific deficiencies in the classical force field model. The approach we take should be quite general and could help study other complex liquids on different length scales.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Efficient Synthesis of High-Performance Anion Exchange Membranes by Applying Clickable Tetrakis(dialkylamino)phosphonium Cations
Tetrakis(dialkylamino)phosphonium (TKDAAP) compounds exhibit extraordinary base resistance, a prerequisite feature for high-performance anion exchange membranes (AEMs). It is, however, challenging to synthesize a TKDAAP compound with reactive functionality that can be used to link the cation to a polymer backbone. In this study, two TKDAAP compounds with alkyne functionality were synthesized and incorporated into an azide-modified SBS triblock copolymer backbone via Cu(I)-catalyzed alkyne–azide cycloaddition (CuAAC) “click” chemistry. The properties of the resulting AEMs were characterized. It was found that (1) the triazole linker between the cation and the polymer backbone was stable under alkaline conditions; (2) varying the substituents of TKDAAP compounds could dramatically alter the stability; and (3) increasing the hydrophilicity of the AEM was an efficient way to enhance its ionic conductivity. Using clickable TKDAAP compounds makes it easy to combine various cations into polymer backbones with adjustable cation content, thus potentially leading to an efficient way to screen a wide variety of polyelectrolyte structures to identify the most promising candidates for high-performance AEMs.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Superhydrophobic Phosphonium Modified Robust 3D Covalent Organic Framework for Preferential Trapping of Charge Dispersed Oxoanionic Pollutants
Abstract Charge dispersed and less hydrophilic anionic pollutants are often difficult to be preferentially captured by common cationic framework materials. A gamma radiation modification approach is employed to anchor a superhydrophobic phosphonium‐containing coating on a robust crystalline 3D covalent organic framework (COF). By regulating the surface hydrophobicity, the prepared 3DCOF‐ g ‐VBPPh 3 Cl is endowed with a strong affinity for charge dispersed and less hydrophilic oxoanions, such as MnO 4 − , TcO 4 − and ReO 4 − , to surmount the Hofmeister bias, which much favors remediation of oxoanionic pollutants in complex aqueous systems. Batch and column experiments with 3DCOF‐g‐VBPPh 3 Cl in both tap water and simulated groundwater are performed, and rapid sequestration is achieved with removal efficacy up to 99.995%, record‐high distribution coefficient of 1.0 × 10 8 mL g −1 , and desirable priority over competing anions such as Cl − , SO 4 2− , HCO 3 − , and NO 3 − , confirming promise for remediation of charge dispersed anionic pollutants. Theoretical calculations reveal a mechanism of preferential capture based on electrostatic and dispersion interaction between charge dispersed anions and 3DCOF‐g‐VBPPh 3 Cl that effectively competes with solvation of the aqueous anions.
Wang, Yue↗
Synergistic Effects Between Phosphonium-Alkylphosphate Ionic Liquids and Zinc Dialkyldithiophosphate (ZDDP) as Lubricant Additives
Unique synergistic effects between phosphonium-alkylphosphate ionic liquids and zinc dialkyldithiophosphate (ZDDP) are discovered when used together as lubricant additives, resulting in significant friction and wear reduction along with distinct tribofilm composition and mechanical properties. The synergism is attributed to the 30-70× higher-than-nominal concentrations of hypothetical new compounds (via anion exchange between IL and ZDDP) on the fluid surface/interface.
36 MATERIALS SCIENCE↗