Search NASA⌕ Search

SEARCH · Search NASA

Results for “photos”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Construction of multi-shelled Bi2WO6 hollow microspheres with enhanced visible light photo-catalytic performance

Highlights: • Bi{sub 2}WO{sub 6} with multi-shelled hollow microstructure was successfully fabricated and the use of ethylene glycol is a key factor. • Bi{sub 2}O{sub 3}/Bi{sub 2}WO{sub 6} composite with multi-shelled hollow structure were also fabricated when concentration of solution was reduced. • Enhanced visible light photocatalytic performance was observed, which are believed due to the unique hollow microstructure. - Abstract: As a promising structure in enhancing the photo-catalytic performance of the materials, hollow-shell structure still faces the great challenge of constructing an effective architecture for catalytic application. Herein, multi-shelled hollow microspheres of the visible-light photo-catalyst Bi{sub 2}WO{sub 6} with shells up to the triple (BWO-MSH), have been synthesized by using a facile and effective carbonaceous template route. Intriguingly, the photo-catalytic reaction rate constant of BWO-MSH sample is nearly 16 times higher than the Bi{sub 2}WO{sub 6} prepared through solid-state reaction (BWO-SSR). The single-, double-shelled Bi{sub 2}WO{sub 6} microspheres (Broken) could only be synthesized with lower quality (synthesized with many broken species), and their photo-catalytic performance was nearly the same poor as the BWO-SSR sample. Furthermore, multi-shelled hollow microsphere of Bi{sub 2}O{sub 3}/Bi{sub 2}WO{sub 6} (BO/BWO-MSH) composite was also synthesized. The present work not only extends the scope of high-performance complex mixed metal oxides with multi-shelled microstructures, but also brings a good reference to engineer other impressive photo-catalyst.

36 MATERIALS SCIENCE↗

Photo- and gas-tuned, reversible thermoelectric properties and anomalous photo-thermoelectric effects of platinum-loaded tungsten trioxide

We report the photo- and gas-controllable properties of platinum-loaded tungsten trioxide (Pt/WO{sub 3}), which is of interest for developing practical applications of WO{sub 3} as well as for interpreting such phenomena from scientific viewpoints. Here, a Pt/WO{sub 3} thin film generated a thermoelectric power due to the ultraviolet-light-induced band-gap excitation (photochromic (PC) reaction) and/or dark storage in formic acid vapor (gaschromic (GC) reaction) in the absence of O{sub 2}, resulting from the generation of W{sup 5+} ions. After such chromic reactions, the electrical conductivity (σ) is increased, whereas the absolute value of the Seebeck coefficient (S) is decreased. The changes in σ and S and their rate of change for consistency increased in the order of: during the PC reaction < during the GC reaction < during simultaneous PC and GC reactions. The opposite behaviors, a decrease in σ and an increase in S, were exhibited by Pt/WO{sub 3} in the presence of O{sub 2} after dark storage or visible-light irradiation. This reversible cycle could be repeated. Moreover, anomalous, nontrivial photo-thermoelectric effects (a photoconductive effect (photoconductivity, σ{sub photo}) and a photo-Seebeck effect (photo-Seebeck coefficient, S{sub photo})) were also detected in response to the visible-light irradiation of Pt/WO{sub 3} in the absence of O{sub 2} after chromic reactions. Under visible-light irradiation, both σ{sub photo} and the absolute value of S{sub photo} are increased. After the irradiation, both values were decreased, that is, σ and the absolute value of S were smaller than σ{sub photo} and the absolute value of S{sub photo}, respectively. These effects are likely to be due to the photoinduced charge carriers and the accumulated electrons in Pt contributing to the increase in σ{sub photo}. In addition, electrons are extracted from the W{sup 5+} state, decreasing the number of W{sup 5+} in H{sub x}WO{sub 3} and thus contributing to the increase in S{sub photo}. After light irradiation, the accumulated electrons in Pt are returned to the energetically favorable W{sup 5+} state, and Pt/H{sub x}WO{sub 3} are returned to the initial state. Then both σ and S are decreased. The mechanisms of our anomalous, nontrivial photo-thermoelectric effects are presumed to be different from that involving the two-carrier contribution to the transport properties.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Photo-controllable thermoelectric properties with reversibility and photo-thermoelectric effects of tungsten trioxide accompanied by its photochromic phenomenon

The addition of photo-controllable properties to tungsten trioxide (WO{sub 3}) is of interest for developing practical applications of WO{sub 3} as well as for interpreting such phenomena from scientific viewpoints. Here, a sputtered crystalline WO{sub 3} thin film generated thermoelectric power due to ultraviolet (UV) light-induced band-gap excitation and was accompanied by a photochromic reaction resulting from generating W{sup 5+} ions. The thermoelectric properties (electrical conductivity (σ) and Seebeck coefficient (S)) and coloration of WO{sub 3} could be reversibly switched by alternating the external stimulus between UV light irradiation and dark storage. After irradiating the film with UV light, σ increased, whereas the absolute value of S decreased, and the photochromic (coloration) reaction was detected. Notably, the opposite behavior was exhibited by WO{sub 3} after dark storage, and this reversible cycle could be repeated at least three times. Moreover, photo-thermoelectric effects (photo-conductive effect (photo-conductivity, σ{sub photo}) and photo-Seebeck effect (photo-Seebeck coefficient, S{sub photo})) were also detected in response to visible-light irradiation of the colored WO{sub 3} thin films. Under visible-light irradiation, σ{sub photo} and the absolute value of S{sub photo} increased and decreased, respectively. These effects are likely attributable to the excitation of electrons from the mid-gap visible light absorption band (W{sup 5+} state) to the conduction band of WO{sub 3}. Our findings demonstrate that the simultaneous, reversible switching of multiple properties of WO{sub 3} thin film is achieved by the application of an external stimulus and that this material exhibits photo-thermoelectric effects when irradiated with visible-light.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Microstructure tuning facilitated photo-efficiency enhancement and environmental benign nature of HfO2/Mo/HfO2 multilayer films

Nano-layered, multilayered ?lms consisting of HfO2(dielectric)/Mo(metal)/HfO2(dielectric), (D/M/D archi-tecture) with controlled layer thickness, chemistry and microstructure were demonstrated for e?cient utiliza-tion of solar energy with well-designated spectral control. The e?ect of Mo metal interlayer on the energy performance and e?ciency of HfO2/Mo/HfO2 multilayer ?lms made by electron-beam deposition onto silicon and glass substrates has been evaluated. The Mo interlayer thickness [Mo(t)] was varied in the range of 5–25 nm while the top/bottom HfO2 layer thickness was kept constant at ~50 nm. Structural, morphological and optical characterization was performed to understand the e?ect of Mo(t) induced microstructure on mechanical dur-ability and optical behavior of the D/M/D multilayer ?lms. Structural studies revealed that D/M/D multilayer ?lms with relatively low Mo(t) were amorphous, while higher Mo(t) induces the amorphous-to-nanocrystalline microstructure transformation, which also induces surface roughening e?ects. The D/M/D multilayer ?lm with Mo(t) = 20 nm, where the nano-columnar morphology of the D-M-D layers are aligned perpendicular to the substrate surface and exhibits the optimum spectral selectivity. Such microstructure and morphological tailoring also facilitates the environmentally friendly (self-cleaning/stain repellent) nature of these multilayer ?lms by the high contact angle (~102°) achieved. Molybdenum interlayer facilitated higher contact angle leads to super-hydrophobic nature of the HfO2/Mo/HfO2 multilayered ?lm surfaces. The low surface roughness values (0.2–0.8 nm), which are primarily due to Mo at the interface, of the HfO2/Mo/HfO2 multilayered ?lms satisfy the general requirements of heat mirror applications. In addition, the microstructure of intermediate Mo layer and HfO2-Mo interfaces signi?cantly control the mechanical properties of D/M/D multilayer ?lms. Optimal me-chanical properties (hardness = 30 GPa, elastic modulus = 312 GPa, wear resistance = 0.094, adhesion strength = 2050 µN) have been obtained for Mo(t) = 20 nm D/M/D multilayer ?lm. The mechanical response strongly supports ?exible and wear resistive nature of HfO2/Mo/HfO2 multilayer ?lms.

Dubey, P↗

Charge Carrier Activity on Single-Particle Photo(electro)catalysts: Toward Function in Solar Energy Conversion

Understanding the fundamental properties of charge carriers on the surface of semiconductor photo(electro)catalysts is key to the rational design of efficient photo(electro)catalytic devices for sunlight-driven energy conversion. Here high spatial resolution information is always desirable because of the ubiquitous heterogeneity in semiconductor particles. In this Perspective, we review the latest advances in nanoscale imaging and quantitative analysis of charge carrier activities on individual semiconductor particles down to subparticle resolution, covering the approaches of single-molecule super-resolution fluorescence imaging, scanning electron microscopy, and photoluminescence microscopy. We further highlight direct, operando functional assessments of their performances toward the targeted photo(electro)-catalytic processes through single- and subparticle photocurrent measurements. Here, we also discuss the significance of establishing quantitative relations between the desired functions of photo(electro)catalysts and their surface charge carrier activities. These fundamental relations can provide guiding principles for rationally engineering photo(electro)catalytic systems, for example with cocatalysts, for a broad range of applications.

14 SOLAR ENERGY↗

Characterization of a silicon photo-multiplier array with summing board as a photo-multiplier tube replacement in organic scintillator assemblies

In this work, we report on the energy, timing, and pulse-shape discrimination performance of cylindrical 5.08 cm diameter x 5.08 cm thick and 7.62 cm diameter x 7.62 cm thick trans-stilbene crystals read out with the passively summed output of three different commercial silicon photo-multiplier arrays. Our results indicate that using the summed output of an 8 x 8 array of SiPMs provides performance competitive with photo-multiplier tubes for many neutron imaging and correlated particle measurements. For a 5.08 cm diameter x 5.08 cm thick crystal read out with SensL’s ArrayJ-60035_64P-PCB, which had the best overall properties, we measure the energy resolution as 17.8 ± 0.8% at 341 keVee (σ/E), the timing resolution in the 180–400 keVee range as 236 ± 61 ps (σ), and the pulse-shape discrimination figure-of-merit as 2.21 ± 0.03 in the 230–260 keVee energy range. For a 7.62 cm diameter x 7.62 cm thick crystal read out with SensL’s ArrayJ-60035_64P-PCB, we measure the energy resolution as 21.9 ± 2.3% at 341 keVee, the timing resolution in the 180–400 keVee range as 518 ± 42 ps, and the pulse-shape discrimination figure-of-merit as 1.49 ± 0.01 in the 230–260 keVee energy range. Our findings enable many scintillator-based instruments to enjoy the size, robustness, and power benefits of silicon photo-multiplier arrays as replacement for the photo-multiplier tubes that are predominantly used today.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Structure of the Photo-catalytically Active Surface of SrTiO 3

A major goal of energy research is to use visible light to cleave water directly, without an applied voltage, into hydrogen and oxygen. Although SrTiO 3 requires ultraviolet light, after four decades, it is still the "gold standard" for the photo-catalytic splitting of water. It is chemically robust and can carry out both hydrogen and oxygen evolution reactions without an applied bias. While ultrahigh vacuum surface science techniques have provided useful insights, we still know relatively little about the structure of these electrodes in contact with electrolytes under operating conditions. Here, we report the surface structure evolution of a n-SrTiO 3 electrode during water splitting, before and after "training" with an applied positive bias. Operando high-energy X-ray reflectivity measurements demonstrate that training the electrode irreversibly reorders the surface. Scanning electrochemical microscopy at open circuit correlates this training with a 3-fold increase of the activity toward the photo-induced water splitting. A novel first-principles joint density functional theory simulation, constrained to the X-ray data via a generalized penalty function, identifies an anatase-like structure as the more active, trained surface.

36 MATERIALS SCIENCE↗

Introduction to (Photo)electrocatalysis For Renewable Energy

Humanity is facing a significant and growing energy demand, necessitating a new energy paradigm built on clean and abundant renewable energy.1 Within this context, electrocatalysis and (photo)electrocatalysis hold great promise for enabling renewable energies such as solar and wind power to overcome the transient nature of their energy output.2-6 Developing catalysts that operate efficiently and selectively, and that are also robust, has been the focus of much research. This special issue brings together the latest advances in the fundamental and applied science addressing the synthesis, characterization, mechanisms, and performance of (photo)electrocatalysts for energy storage and conversion of small molecules into useful specialty and commodity chemicals and fuels. The electrocatalysts and (photo)electrocatalysts highlighted in this issue include metalloenzymes, homogeneous and supported molecular catalysts, and diverse heterogeneous nanoparticulate and thin film systems. The reports span across basic and applied studies and encompass both experimental and theoretical investigations.

Dey, Abhishek↗

Modeling the gain of inner-shell X-ray laser transitions in neon, argon, and copper driven by X-ray free electron laser radiation using photo-ionization and photo-excitation processes

Using an X-ray free electron laser (XFEL) at 960 eV to photo-ionize the 1s electron in neutral neon followed by lasing on the 2p-1s transition in singly-ionized neon, an inner-shell X-ray laser was demonstrated at 849 eV in singly-ionized neon gas several years ago. It took decades to demonstrate this scheme, because it required a very strong X-ray source that could photo-ionize the 1s (K shell) electron in neon on a timescale comparable to the intrinsic Auger lifetime in neon of 2 fs. In this paper, we model the neon inner shell X-ray laser under similar conditions to those used in the XFEL experiments at the SLAC Linac Coherent Light Source (LCLS), and show how we can improve the efficiency of the neon laser and reduce the drive requirements by tuning the XFEL to the 1s-3p transition in neutral neon in order to create gain on the 2p-1s line in neutral neon. We also show how the XFEL could be used to photo-ionize L-shell electrons to drive gain on n = 3–2 transitions in singly-ionized Ar and Cu plasmas. These bright, coherent, and monochromatic X-ray lasers may prove very useful for doing high-resolution spectroscopy and for studying non-linear process in the X-ray regime.

36 MATERIALS SCIENCE↗

Visualizing Overall Water Splitting on Single Microcrystals of Phosphorus-Doped BiVO 4 by Photo-SECM

Particulate bismuth vanadate (BiVO4) has attracted considerable interest as a promising photo(electro)catalyst for visible-light-driven water oxidation, however, overall water splitting (OWS) has been difficult to attain because its conduction band is too positive for efficient hydrogen evolution. Using photo-scanning electrochemical microscopy (photo-SECM) with a chemically modified nanotip, we visualized for the first time the OWS at a single truncated bipyramidal microcrystal of phosphorus-doped BiVO 4 . The tip simultaneously served as a light guide to illuminate the photocatalyst and as an electrochemical nanoprobe to observe and quantitatively measure local oxygen and hydrogen fluxes. The obtained current patterns for both O 2 and H 2 agree well with the accumulation of photogenerated holes and electrons on {010} basal and {110} lateral facets, respectively. Furthermore, the developed experimental approach is an important step towards nanoelectrochemical mapping of the activity of photocatalyst particles at the sub-facet level.

bismuth vanadate↗

Using Quasi-Monoenergetic Photon Sources To Probe Photo-Fission Resonances

We present preliminary results of photo-fission measurements of uranium isotopes with the quasi-monoenergetic gamma-ray source, HIGS. The measurements were performed to search for photo-fission resonances. We discuss potential applications to use photo-fission resonances to identify special nuclear material in cargo containers. We discuss the importance of quasi-monoenergetic gamma-ray sources for this kind of application.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Photo-induced refractive index and topographical surface gratings in functionalized nanocarbon solid film

We demonstrate that a single-walled carbon nanotube network noncovalently coupled with a pyrene-modified azo-benzene chromophore functions as a host matrix for a broad range of photo-orientation and photomechanical effects. The chromophore could be efficiently reoriented through repeated trans-cis-trans isomerization under linearly polarized 480 nm light, with Δn of 0.012 at 650 nm and fast characteristic rise-times of 0.12 s. Erasable phase diffraction gratings could also be written, with permanent surface relief gratings forming at sufficiently long irradiation times. In addition to demonstrating a mechanism for photo-manipulation of single-walled carbon nanotubes, these results show photo-orientation of chromophores in azo-functionalized single-walled carbon nanotube networks as a path towards the photosensitive tuning of the electrostatic environment of the nanotube.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Colloidal plasmonic DNA-origami with photo-switchable chirality in liquid crystals

Photo-responsive nanomaterials hold great promise for realizing information processing devices, micro-machines and biosensors. Scalable assembly of such materials using mesostructured liquids such as liquid crystals remains a challenge due to the poor compatibility of nanostructures and the host medium. Here we demonstrate a new type of colloidal dispersion of plasmonic DNA-origami with photo-switchable chirality in cellulose nanofiber-based liquid crystals. The composite material inherits properties of DNA-origami plasmonic nanostructures, so that the composite’s chirality can be erased by ultraviolet light and recovered by visible light. Here, the cellulose nanofibers provide a liquid crystalline host with weak optical birefringence, which barely affects the polarization of the incident light, so that the response is dominated by circular dichroism of uniformly dispersed plasmonic nanostructures. Our approach may serve as a new platform for scalable assembling DNA origami-templated nanomaterials.

59 BASIC BIOLOGICAL SCIENCES↗