Search NASA⌕ Search

SEARCH · Search NASA

Results for “physical constraints”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Geomagnetic field models incorporating physical constraints on the secular variation

This proposal has been concerned with methods for constructing geomagnetic field models that incorporate physical constraints on the secular variation. The principle goal that has been accomplished is the development of flexible algorithms designed to test whether the frozen flux approximation is adequate to describe the available geomagnetic data and their secular variation throughout this century. These have been applied to geomagnetic data from both the early and middle part of this century and convincingly demonstrate that there is no need to invoke violations of the frozen flux hypothesis in order to satisfy the available geomagnetic data.

Constable, Catherine↗
NASA NTRS1988

Approximation of the dielectric properties of Maxwellian plasmas - Dispersion functions and physical constraints

The dielectric properties of Maxwellian plasmas are approximated using high Pade approximants to the dispersion function and direct approximation of the distribution. Physical constraints on permissible approximations are discussed, and it is found that some previously published results can lead to predictions of qualitatively incorrect wave properties, including unphysical negative damping. Approximate dispersion functions for Maxwellian distributions are given explicitly, and some of the effects of these approximations on the resulting dispersion are discussed. The approximations discussed here are of use both in analytical work and in accelerating large-scale numerical computations.

Robinson, P. A.↗
NASA NTRS1979

Performance optimization of an MHD generator with physical constraints

A method to optimize the Faraday MHD generator performance under a prescribed set of electrical and magnet constraints is described. The results of generator performance calculations using this technique are presented for a very large MHD/steam plant. The differences between the maximum power and maximum net power generators are described. The sensitivity of the generator performance to the various operational parameters are presented.

Pian, C. C. P.↗
NASA NTRS1979

Performance optimization of an MHD generator with physical constraints

A technique has been described which optimizes the power out of a Faraday MHD generator operating under a prescribed set of electrical and magnetic constraints. The method does not rely on complicated numerical optimization techniques. Instead the magnetic field and the electrical loading are adjusted at each streamwise location such that the resultant generator design operates at the most limiting of the cited stress levels. The simplicity of the procedure makes it ideal for optimizing generator designs for system analysis studies of power plants. The resultant locally optimum channel designs are, however, not necessarily the global optimum designs. The results of generator performance calculations are presented for an approximately 2000 MWe size plant. The difference between the maximum power generator design and the optimal design which maximizes net MHD power are described. The sensitivity of the generator performance to the various operational parameters are also presented.

Pian, C. C. P.↗
NASA NTRSDate not supplied

Game-Theoretic Modeling of Vegetation Composition, Structure, and Dynamics: Physical Constraints, Fundamental Processes, and Emergent Properties

Vegetation structural and compositional dynamics emerge from plant physiological and demographic processes, individual-based competition, vegetation-soil feedbacks, and environmental variations and disturbance events. Predicting long-term changes in vegetation requires scaling plant individual behavior to large scale ecosystem processes. In this presentation, we summarize our studies in the modeling of vegetation demographic processes, competitively dominant plant traits, plant hydraulic processes, and stochastic disturbance effects on ecosystems, and illustrate the roles of the underlying ecological processes and eco-evolutionary optimization in vegetation modeling. With the case studies of evolutionarily stable strategy of allocation, leaf traits, and plant hydraulic processes, we show how the ecosystem processes and vegetation dynamics are determined by the individual-based plant competition and variations of soil and climate conditions. The predictions of ecosystem carbon dynamics can be greatly different with those from the traditional “single-tree” models. We also discuss the tradeoffs of plant traits and evolutionarily optimal strategies in the modeling of terrestrial ecosystem dynamics in an Earth system model.

vegetation models↗
NASA NTRS1990

The volume- and surface-binding energies of ice systems containing CO, CO2, and H2O

Laboratory-measured, temperature-dependent sticking efficiencies are presently used to derive the surface-binding energies of CO and CO2 on H2O-rich ices, with a view to determining the condensation and vaporization properties of these systems as well as to the measured energies' implications for both cometary behavior and the evolution of interstellar ices. The molecular volume and the surface binding energies are not found to be necessarily related on the basis of simple nearest-neighbor scaling in surface and bulk sites; this may be due to the physical constraints associated with matrix structure-associated physical constraints, which sometimes dominate the volume-binding energies.

Sandford, Scott A.↗
NASA NTRS1985

Geomagnetic main field modeling using magnetohydrodynamic constraints

The influence of physical constraints are investigated which may be approximately satisfied by the Earth's liquid core on models of the geomagnetic main field and its secular variation. A previous report describes the methodology used to incorporate nonlinear equations of constraint into the main field model. The application of that methodology to the GSFC 12/83 field model to test the frozen-flux hypothesis and the usefulness of incorporating magnetohydrodynamic constraints for obtaining improved geomagnetic field models is described.

Estes, R. H.↗
NASA NTRS1988

Moment constraints on physical models for quasi-periodic oscillations from Galactic X-ray sources

Shot-noise models provide a useful mathematical representation for some physical models for the quasi-periodic oscillations (QPOs) recently observed from several bright Galactic bulge and burst X-ray sources. Expressions are calculated for the first three moments for several versions of QPO shot-noise models that have appeared in the literature. It is shown that measurement of the third moment, together with measurement of the mean intensity and the power spectrum, can provide model-dependent constraints on important parameters of QPO shot-noise models, including the fraction of the X-ray intensity in shots and the shot rate. Under certain condtitions, a complete solution for all the shot-model parameters is possible.

Elsner, R. F.↗
NASA NTRS1986

X-ray absorption in active galaxies - Constraints on the broad-line emitting regions

X-ray observations of intrinsic absorption in active galactic nuclei (AGN) provide direct information concerning the amount and physical properties of cool (unionized) material along the line of sight. The X-ray absorption is assumed to occur in the broad-line emitting gas, so that the X-ray data can be used to probe the conditions in the broad-line regions of AGN. The results of Einstein Observatory solid state spectrometer observations are used to derive detailed physical constraints concerning the geometry of the broad-line region. Physical implications of these constraints are also discussed.

Reichert, G. A.↗
NASA NTRS2019

Image Processing Methods for Coronal Hole Segmentation, Matching, and Map Classification

The paper presents the results from a multi-year effort to develop and validate image processing methods forselecting the best physical models based on solar image observations. The approach consists of selecting the physical models based on their agreement with coronal holes extracted from the images. Ultimately, the goal is to use physical models to predict geomagnetic storms. We decompose the problem into three subproblems: (i) coronal hole segmentation based on physical constraints, (ii) matching clusters of coronal holes between different maps, and (iii) physical map classification. For segmenting coronal holes, we develop a multi-modal method that uses segmentation maps from three different methods to initialize a level-set method that evolves the initial coronal hole segmentation to the magnetic boundary. Then, we introducea new method based on Linear Programming for matchingclusters of coronal holes. The final matching is then performedusing Random Forests. The methods were carefully validatedusing consensus maps derived from multiple readers, manualclustering, manual map classification, and method validation for50 maps. The proposed multi-modal segmentation method significantly outperformed SegNet, U-net, Henney-Harvey, and FCNby providing accurate boundary detection. Overall, the methodgave a 95.5% map classification accuracy.

Jatla, Venkatesh↗
NASA NTRS1993

Least-Squares Deconvolution of Compton Telescope Data with the Positivity Constraint

We describe a Direct Linear Algebraic Deconvolution (DLAD) approach to imaging of data from Compton gamma-ray telescopes. Imposition of the additional physical constraint, that all components of the model be non-negative, has been found to have a powerful effect in stabilizing the results, giving spatial resolution at or near the instrumental limit. A companion paper (Dixon et al. 1993) presents preliminary images of the Crab Nebula region using data from COMPTEL on the Compton Gamma-Ray Observatory.

COMPTEL↗
NASA NTRS1982

Digital system for structural dynamics simulation

State-of-the-art digital hardware and software for the simulation of complex structural dynamic interactions, such as those which occur in rotating structures (engine systems). System were incorporated in a designed to use an array of processors in which the computation for each physical subelement or functional subsystem would be assigned to a single specific processor in the simulator. These node processors are microprogrammed bit-slice microcomputers which function autonomously and can communicate with each other and a central control minicomputer over parallel digital lines. Inter-processor nearest neighbor communications busses pass the constants which represent physical constraints and boundary conditions. The node processors are connected to the six nearest neighbor node processors to simulate the actual physical interface of real substructures. Computer generated finite element mesh and force models can be developed with the aid of the central control minicomputer. The control computer also oversees the animation of a graphics display system, disk-based mass storage along with the individual processing elements.

Krauter, A. I.↗
NASA NTRS2022

Co-leveraging Scientific Advances in Space Biology and Astrobiology Towards Achieving NASA’s Life Science Objectives

Executive Summary: Distinct lines of scientific inquiry drives the separation of NASA’s fundamental life science research into Space Biology and Astrobiology. This division developed as a way to place life scientists alongside experts in the physical constraints that define the acclimation, adaptation and evolution of biology systems relevant to their respective subjects. For astrobiology, integration with disciplines such as geology, geochemistry, astronomy, planetary science, etc., enables a comprehensive assessment of the physical environment and its co-evolution with biological processes. Space Biology’s co-location with Physical Sciences places life science researchers adjacent to experts in the physical phenomena associated with microgravity and spaceflight, enabling an understanding of how the spaceflight environment affects biological systems. Despite this separation, aspects of both disciplines have converged on a similar, fundamental objective: to describe and understand the dynamics of complex living communities in the contexts of their physical environments. While the environmental systems and timescales are dramatically different, continuing to motivate the separation into distinct fields, similarities in the underlying objective present opportunities to find efficiencies, reduce overlap, and minimize duplication of effort. Space Biology and Astrobiology share a common need to understand microbial physiology in extreme environments – whether the ‘built’ spaceflight environment or the natural environments in which many astrobiology studies are conducted. In particular, open questions in each discipline require the development of quantitative frameworks, applicable at the ecosystem level, that support predictive capabilities for environments where observations are sparse. Additionally, both disciplines have a need to prepare, detect, and analyze the (potential) biological signal in complex samples-often in a completely autonomous fashion. The next decade will see NASA Space Biology moving to understand and describe the effects of the beyond low-earth orbit (BLEO) spaceflight environment on living systems. This new direction will dramatically reduce the opportunities for ground-based analysis of space-flown samples, driving space biology investigations towards fully autonomous experiments and missions. At the same time, astrobiology life detection missions aimed at detecting biosignatures on Mars and icy moons in the outer solar system could benefit from fully automated sample processing and analysis. There are opportunities to leverage instrument and method development between both disciplines within the context of these BLEO missions.

Astrobiology↗
NASA NTRS1983

Dynamic crystallization experiments as constraints on chondrule genesis

The effectiveness of dynamic recrystallization experiments to reconstruct chondrule textures is evaluated. Consideration is given to the results of several experimental simulations of the silicate spheres of pyroxene-olivine chondrules, Si-rich chondrules, chondrites, droplet chondrules, and microporphyritic chondrules. It is shown that many chondrules have textures consistent with heating to 1400-1600 C, and cooling rates from a few degrees to several thousands of degrees per hour. It is shown that this physical constraint effectively rules out mechanisms for chondrule genesis which do not require instantaneous or very slow cooling. Analysis of the available textural, chemical, and isotopic data suggest that chondrules were generated from primordial particles, and several mechanisms might have assisted in chondrule heating as they settled down toward the median plane of the nebula. The most important of these mechanisms appear to be friction with the nebular gas and heating by flares.

Hewins, R. H.↗
NASA NTRS1989

Direction of movement effects under transformed visual/motor mappings

Performance in a discrete aiming task was compared under several transformed visual/motor mappings: rotations by 45, 90, 135, and 180 deg and reflections about the horizontal and the vertical midlines. Eight aiming targets were used, corresponding to eight directions of movement: up, down, right, left, up-right, down-left, up-left, and down-right. Direction of movements were characterized in terms of separable visual and motor components, and two kinds of direction of movement effects were considered. First, a direction of movement effect paralleling that seen in rapid aiming under the usual nontransformed mapping. Second, because rotations, but not reflections, are physically realizable 2-D transformations, a visual/motor control system which is sensitive to physical constraints should perform reflections, but not rotations, in a piecemeal fashion. Results supported the hypothesis that a motor factor having to do with complexity of limb movement accounts for differences in movement accuracy between right and left oblique directions. Direction of movement effects were more evident in reflections than in rotations, and were consistent with the hypothesis that the visual/motor-control system seeks a physically realizable 2-D rotation solution to reflections. Results also suggested that reversal of two orthogonal basis dimensions is far less difficult than reversing only one and leaving the other intact.

Cunningham, H. A.↗
NASA NTRS2015

Identification and Analysis of National Airspace System Resource Constraints

This analysis is the deliverable for the Airspace Systems Program, Systems Analysis Integration and Evaluation Project Milestone for the Systems and Portfolio Analysis (SPA) focus area SPA.4.06 Identification and Analysis of National Airspace System (NAS) Resource Constraints and Mitigation Strategies. "Identify choke points in the current and future NAS. Choke points refer to any areas in the en route, terminal, oceanic, airport, and surface operations that constrain actual demand in current and projected future operations. Use the Common Scenarios based on Transportation Systems Analysis Model (TSAM) projections of future demand developed under SPA.4.04 Tools, Methods and Scenarios Development. Analyze causes, including operational and physical constraints." The NASA analysis is complementary to a NASA Research Announcement (NRA) "Development of Tools and Analysis to Evaluate Choke Points in the National Airspace System" Contract # NNA3AB95C awarded to Logistics Management Institute, Sept 2013.

Smith, Jeremy C.↗
NASA NTRS2014

Developing an Integration Infrastructure for Distributed Engine Control Technologies

Turbine engine control technology is poised to make the first revolutionary leap forward since the advent of full authority digital engine control in the mid-1980s. This change aims squarely at overcoming the physical constraints that have historically limited control system hardware on aero-engines to a federated architecture. Distributed control architecture allows complex analog interfaces existing between system elements and the control unit to be replaced by standardized digital interfaces. Embedded processing, enabled by high temperature electronics, provides for digitization of signals at the source and network communications resulting in a modular system at the hardware level. While this scheme simplifies the physical integration of the system, its complexity appears in other ways. In fact, integration now becomes a shared responsibility among suppliers and system integrators. While these are the most obvious changes, there are additional concerns about performance, reliability, and failure modes due to distributed architecture that warrant detailed study. This paper describes the development of a new facility intended to address the many challenges of the underlying technologies of distributed control. The facility is capable of performing both simulation and hardware studies ranging from component to system level complexity. Its modular and hierarchical structure allows the user to focus their interaction on specific areas of interest.

distributed control↗