Simulation of the main physical processes in remote laser penetration with large laser spot size
Not Available
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Not Available
There are many physical processes involved in the stratus-topped boundary layer: longwave radiation cooling, entrainment, latent heating, surface heating, solar heating, and drizzling, for example. The manner in which the processes combine to maintain the turbulence within the stratus-topped boundary layer remains an unsolved problem. The large eddy simulation technique is used to examine the first four physical processes mentioned above. First, the contribution of each physical process to the thermodynamic differences between the updraft and downdraft branches of turbulent circulations is examined through a conditional sampling. Second, these mean thermodynamic differences are shown to express well the vertical distributions of heat and moisture fluxes within stratus-topped boundary layers. These provide a method to validate the process partitioning technique. (This technique assumes that the net flux profile can be partitioned into different component-flux profiles according to physical processes, and that each partitioned component flux is linear in height.) In this paper, the heat and moisture fluxes are process partitioned, and each component-flux is found to contribute to the net flux in a way that is consistent with its corresponding process contribution to the mean thermodynamic differences between updrafts and downdrafts. Also, the net flux obtained by summing all component-fluxes agrees very well with that obtained directly from the large-eddy simulations.
Physical processes occurring in gamma-ray bursts are discussed, with special attention to the event of March 5, 1979 in the Large Magellanic Cloud. The source of that event's extraordinary intense line and continuum radiation has been explained as a pair plasma confined in a strong magnetic field, as in a neutron star magnetosphere, and some consequences of that model are studied. The magnetic field (approximately 10 to the 13th gauss) affects both plasma physical processes and annihilation, so that accurate measurements of the annihilation line shape may lead to quantitative field determinations. A simple model for gamma-gamma pair production and annihilation is calculated, implying that this process will not prevent escape of intense gamma-ray fluxes. Finally, energetic considerations suggest that the magnetospheric energy may be regenerated from internal sources, either during or between bursts.
Physical process effect on structure of H II REGIONS, noting ionization, Lyman continuum spectral distribution and radiative transfer frequency dependence on absorptive processes
Aimed at reducing deficiencies in representing the Madden-Julian oscillation (MJO) in general circulation models (GCMs), a global model evaluation project on vertical structure and physical processes of the MJO was coordinated. In this paper, results from the climate simulation component of this project are reported. Here, it is shown that the MJO remains a great challenge in these latest generation GCMs. The systematic eastward propagation of the MJO is only well simulated in about one fourth of the total participating models. The observed vertical westward tilt with altitude of the MJO is well simulated in good MJO models but not in the poor ones. Damped Kelvin wave responses to the east of convection in the lower troposphere could be responsible for the missing MJO preconditioning process in these poor MJO models. Several process-oriented diagnostics were conducted to discriminate key processes for realistic MJO simulations. While large-scale rainfall partition and low-level mean zonal winds over the Indo-Pacific in a model are not found to be closely associated with its MJO skill, two metrics, including the low-level relative humidity difference between high- and low-rain events and seasonal mean gross moist stability, exhibit statistically significant correlations with the MJO performance. It is further indicated that increased cloud-radiative feedback tends to be associated with reduced amplitude of intraseasonal variability, which is incompatible with the radiative instability theory previously proposed for the MJO. Finally, results in this study confirm that inclusion of air-sea interaction can lead to significant improvement in simulating the MJO.
The paper discusses physical processes in comets which involve solar and nuclear radial forces that affect the motions of gases and icy grains, gas-phase chemistry very close to the nuclei of large comets near the sun, sublimation of icy grains, dissociation of parent molecules into radicals and of radicals into atoms, and ionization by sunlight and collisions. The composition and dimensions of nuclei are examined along with variations in intrinsic brightness, the nature of volatiles, gas production rates in the coma, characteristics of icy grains in the coma, and the structure of streamers, ion tails, and dust tails. The structure of the coma is described in detail on the basis of spectroscopic observations of several comets. The origin of comets is briefly reviewed together with the relation of comets to earth, the interplanetary complex, and the interstellar medium. Desirable future observations are noted, especially by space missions to comets.
The purpose of this study was to identify major parameters and physical processes that have greatest impacts on the near surface energy balance in the Arctic environment. The historical data set for the period of 1948 to 2004 from National Center for Atmospheric Research (NCAR) was used to generate atmospheric forcing data for this analysis. The CLM 4.0 (Community Land Model) was used for land simulations of the point grid cell located near Fairbanks, Alaska. A range of hydrogeologic and thermal soil properties and vegetation characteristics were defined for the vegetation and soil data. The current approach used in CLM was modified to simulate soil moisture to allow for more realistic water table representation. Multiple CLM sensitivity runs were analyzed with regard to their effects on the feedbacks to the atmospheric model. This analysis allowed for identifying major parameters and important physical processes with the potential to impact the climate either in the short or long term.
Cometary nuclei preserve a cosmo-chemical record of conditions and processes in the primordial solar nebula, and possibly even the interstellar medium. However, that record is not perfectly preserved over the age of the solar system due to a variety of physical processes which act to modify cometary surfaces and interiors. Possible structural and/or internal processes include: collisional accretion, disruption, and reassembly during formation; internal heating by long and short-lived radionuclides; amorphous to crystalline phase transitions, and thermal stresses. Identified surface modification processes include: irradiation by galactic cosmic rays, solar protons, UV photons, and the Sun's T Tauri stage mass outflow; heating by passing stars and nearby supernovae; gardening by debris impacts; the accretion of interstellar dust and gas and accompanying erosion by hypervelocity dust impacts and sputtering; and solar heating with accompanying crust formation. These modification processes must be taken into account in both the planning and the interpretation of the results of a Comet Nucleus Sample Return Mission. Sampling of nuclei should be done at as great a depth below the surface crust as technically feasible, and at vents or fissures leading to exposed volatiles at depth. Samples of the expected cometary crust and near-surface layers also need to be returned for analysis to achieve a better understanding of the effects of these physical processes. We stress that comets are still likely less modified dm any other solar system bodies, but the degree of modification can vary greatly from one comet to the next.
A two-dimensional axisymmetric electromagnetic particle-in-cell code with Monte Carlo collision conditions has been developed for an applied-field magnetoplasmadynamic thruster simulation. This theoretical approach establishes a particle acceleration model to investigate the microscopic and macroscopic characteristics of particles. This new simulation code was used to study the physical processes associated with applied magnetic fields. In this paper (I), detail of the computation procedure and results of predictions of local plasma and field properties are presented. The numerical model was applied to the configuration of a NASA Lewis Research Center 100-kW magnetoplasmadynamic thruster which has well documented experimental results. The applied magnetic field strength was varied from 0 to 0.12 T, and the effects on thrust were calculated as a basis for verification of the theoretical approach. With this confirmation, the changes in the distributions of ion density, velocity, and temperature throughout the acceleration region related to the applied magnetic fields were investigated. Using these results, the effects of applied field on physical processes in the thruster discharge region could be represented in detail, and those results are reported.
The NASA K sub u band Radar Ocean Wave Spectrometer (ROWS) is an experimental prototype of a possible future satellite instrument for low data rate global waves measurements. The ROWS technique, which utilizes short pulse radar altimeters in a conical scan mode near vertical incidence to map the directional slope spectrum in wave number and azimuth, is briefly described. The potential of the technique is illustrated by some specific case studies of wave physical processes utilizing the aircraft ROWS data. These include: (1) an evaluation of numerical hindcast model performance in storm sea conditions, (2) a study of fetch limited wave growth, and (3) a study of the fully developed sea state. Results of these studies, which are briefly summarized, show how directional wave spectral observations from a mobile platform can contribute enormously to our understanding of wave physical processes.
At present, electron sources are essential in a wide range of applications – from common technical use to exploring the nature of matter. Depending on the application requirements, different methods and materials are used to generate electrons. State of-the-art accelerator applications set a number of often-contradicting requirements for electron sources (e.g., high quantum efficiency vs. high spin-polarization, high current density vs. long lifetime, etc). Development of advanced electron sources includes modeling and design of cathodes, material growth, fabrication of cathodes, and cathode testing. The detailed simulation and modeling of physical processes are required in order to shed light on the exact mechanisms of electron emission and to develop new-generation electron sources with optimized efficiency. The purpose of the present work is to study physical processes in prominent electron sources and to develop scientific tools that could be used to predict electron emission from novel nano-structured materials. In particular, the Monte Carlo model has been implemented and used to study photoemission from Negative Electron Affinity (NEA) GaAs widely used to provide spin-polarized electron beams for many accelerator facilities, including Thomas Jefferson National Accelerator Facility. According to our best knowledge, this is the first to date scientific tool to simulate the complete from-excitation-to-emission-into-vacuum photoemission of spin-polarized electrons from NEA GaAs based on the details of material band structure. Moreover, an effective image-processing algorithm has been developed and used to study field emission properties of Nitrogen-incorporated UltraNanoCrystalline Diamond ((N)UNCD) films. The algorithm processes large sets of image micrographs representing field emission sites formed on the anode plate and therefore provides significant information about the field emission area and the current density. The field emission model from convenient semiconductors has been modified and used to study the influence of the space-charge region and the electric-field-dependent electron mobility on the field emission characteristics of (N)UNCD field emitters.
Discussion of the physical processes in a co-axial plasma gun and the problem of employing it for propulsion
Physical processes in magneto-plasmadynamic arc
Physical processes that take place in a strip electrode during welding using the slatted splicing technique are considered. Flowing of the welding current in the electrode is shown to be the key process which determines electrode heating and melting. Technological receipts are proposed that allow obtaining high-quality welds by the method of slatted splicing.
Physical processes in magneto-plasmadynamic arc of tungsten cathode
This study investigates finite-volume effects in physical processes that involve the combination of long-range hadronic matrix elements with electroweak loop integrals. We adopt the approach of implementing the electroweak part as the infinite-volume version, which is denoted as the EW ∞ method in this work. A general approach is established for correcting finite-volume effects in cases where the hadronic intermediate states are dominated by either a single particle or two particles. For the single-particle case, this work derives the infinite volume reconstruction method from a new perspective. For the two-particle case, we provide the correction formulas for power-law finite-volume effects and unphysical terms with exponentially divergent time dependence. The finite-volume formalism developed in this study has broad applications, including the QED corrections in various processes and the two-photon exchange contribution in 𝐾 𝐿 → 𝜇 + 𝜇 − or 𝜂 → 𝜇 + 𝜇 − decays.
In this talk, I will begin by discussing the physical processes that govern the competition between heterogeneous and homogeneous ice nucleation in upper tropospheric cirrus clouds. Next, I will review the current knowledge of low-temperature ice nucleation from laboratory experiments and field measurements. I will then discuss the uncertainties and deficiencies in representations of cirrus processes in global models used to estimate the climate impacts of changes in cirrus clouds. Lastly, I will review the critical field measurements needed to advance our understanding of cirrus and their susceptibility to changes in aerosol properties.
Low-frequency (100 Hz), intermediate-current (50 to 200 mA) glow discharges were experimentally investigated in atmospheric pressure air between blunt copper electrodes. Voltage–current characteristics and images of the discharge for different inter-electrode distances are reported. A cathode-fall voltage close to 360 V and a current density at the cathode surface of about 11 A/cm{sup 2}, both independent of the discharge current, were found. The visible emissive structure of the discharge resembles to that of a typical low-pressure glow, thus suggesting a glow-like electric field distribution in the discharge. A kinetic model for the discharge ionization processes is also presented with the aim of identifying the main physical processes ruling the discharge behavior. The numerical results indicate the presence of a non-equilibrium plasma with rather high gas temperature (above 4000 K) leading to the production of components such as NO, O, and N which are usually absent in low-current glows. Hence, the ionization by electron-impact is replaced by associative ionization, which is independent of the reduced electric field. This leads to a negative current-voltage characteristic curve, in spite of the glow-like features of the discharge. On the other hand, several estimations show that the discharge seems to be stabilized by heat conduction; being thermally stable due to its reduced size. All the quoted results indicate that although this discharge regime might be considered to be close to an arc, it is still a glow discharge as demonstrated by its overall properties, supported also by the presence of thermal non-equilibrium.