Search NASA⌕ Search

SEARCH · Search NASA

Results for “plasma edge”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Development of a Direct Neutral Density Diagnostic for Fusion Edge Plasmas

As magnetically confined plasmas progress towards ignition and long pulse experiments, measurement and control of the neutral density in the plasma edge has become a critical issue for stability, formation of transport barriers, and fueling. Recent experiments by our research group have demonstrated that is possible to use two-photon absorption laser induced fluorescence (TA-LIF) to directly measure the density of neutral hydrogen in helicon sources and in the HIT-SI3 spheromak. While those experiments validated key elements of a diagnostic system that would enable similar measurements in tokamak plasmas, they did not fully address the issue of performance optimization in the presence of intense background light at the fluorescence wavelength and they also identified a number of other issues that must be resolved before successful TALIF neutral density measurements in a tokamak are likely to be achieved. Additional specific concerns raised during design reviews with the leadership of the DIII-D tokamak facility included: the minimum detection threshold for this TALIF diagnostic (currently ~ 5 x 10 15 m -3 ) and the rate at which neutral density measurements could be obtained. Improving the system performance to reduce the minimum detection threshold and demonstrating a faster rate of density determination are required to advance this diagnostic to the level where it could be considered for implementation on a major tokamak facility in the USA. The key issues that will be addressed through additional technological development are: validation of a new, chromatic aberration-free, xenon calibration scheme; increasing the output power of the laser; and suppression of background emission at the fluorescence wavelength through optimization of the collection optics and gating of the photomultiplier detector with a goal of obtaining a minimum detection threshold of 5 x 10 14 m -3 . Another key technological development, so far only tested in helicon source experiments, is the validation of Doppler-free TALIF as a means of obtaining higher speed, calibrated, neutral density measurements in tokamak-like conditions at the full cadence of the pulsed TALIF laser. In this work, we propose to complete these technological advancements through installation and testing of our prototype TALIF system on the proto-MPEX experiment at Oak Ridge National Laboratory (ORNL). The proto-MPEX facility will provide plasma conditions similar to the edge plasma of a major tokamak experiment but with pulse lengths and pulse repetition rates ideally suited for extensive development of a TALIF neutral density diagnostic. Measurement of the absolute neutral density in the edge of a magnetically confined plasma is necessary for plasma density control; calculation of charge-exchange power losses; control of plasma-wall interactions; determination of the braking of plasma flow; determination of the fuel mixture in deuterium-tritium plasma; and understanding the dynamics of the divertor region in the plasma edge. In terms of potential impact on the worldwide fusion program, we note that in burning plasma experiments, such as ITER, a 100 mJ/pulse Doppler-free TALIF diagnostic should be capable of directly measuring the deuterium/tritium (D/T) isotope ratio in the outer 0.5 to 1.0 m of the plasma radius. The D/T ratio is a critically important parameter for the control and optimization of burning plasmas. Therefore, development of the diagnostic system proposed here is also relevant to long-term US participation in diagnostic development for large tokamaks.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Simulations of grain growth in tungsten armor materials under ARC plasma edge operation conditions using an integrated plasma-edge/materials model

An integrated model of grain growth deuterium-exposed tungsten polycrystals, consisting of a two-dimensional vertex dynamics model fitted to atomistic data, has been developed to assess the grain growth kinetics of deuterium-exposed polycrystalline tungsten (W). The model tracks the motion of grain boundaries under the effect of driving forces stemming from grain boundary curvature and differential deuterium concentration accumulation. Here, we apply the model to experimentally synthesized tungsten polycrystals under deuterium-saturated conditions relevant to the ARC concept design. The results indicate rapid grain growth kinetics in the near-surface region adjacent to the plasma, where the temperature reaches 1400 K, whereas the microstructure remains stable deeper in the material with the lower temperature of 1000 K. The combined modeling and analysis further reveal that monolithic tungsten produced via conventional fabrication routes is highly susceptible to grain coarsening at temperatures exceeding 1000 K, largely independent of the magnitude of the applied driving force. Moreover, the accumulation of deuterium near grain boundaries has a pronounced inhibitory effect on grain boundary migration. High-angle grain boundaries ( > 50°) contribute more significantly to the overall grain growth process.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Influence of the inverse sheath on divertor plasma performance in tokamak edge plasma simulations

Recently, it was shown that strong electron thermionic emission from material walls could result in the formation of an “inverse sheath”, which prevents the flow of cold ions to the wall. Such regimes look very favorably from the point of view of plasma-material interactions at the edge of magnetic fusion devices, where the problem of the erosion of plasma facing components under ion irradiation is one of the key issues for developing of future magnetic fusion reactors. However, it is not clear whether such regimes are compatible with edge plasma parameters and heat removal requirements in fusion reactors.To address the issue of practicality of the “inverse sheath” regime for edge tokamak plasma conditions, we perform a set of numerical simulations with 2D edge plasma transport code UEDGE for a DIII-D-like geometry and magnetic configuration.To describe both “standard” and “inverse sheath” conditions within the framework of the UEDGE code (which does not consider the sheath region per se), at the material surfaces, we apply effective boundary conditions which emulate both “standard” and“inverse sheath” regimes. We demonstrate that for the same input parameters, spatial distributions of edge plasma parameters corresponding to detached divertor and“inverse sheath” regimes are similar, with only a few minor differences. We discuss the compatibility of “inverse sheath” regimes with core plasma parameters.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Faraday-effect polarimetry for current profile measurement in the tokamak plasma edge

Toroidal current profile measurements in the tokamak plasma edge are critical for fusion plasma physics research and model validation. A three-wave Faraday-effect polarimeter-interferometer with a sub-centimeter spatial resolution is proposed on the DIII-D tokamak to determine the edge current profile via Abel inversion. By using probe beams with 316 µm wavelength, a low-field-side, vertical-view, single-pass optical layout covering the plasma edge region (R = 2.15–2.27 m) is assessed. Measurements with no greater than 0.1° polarimetric systematic uncertainty, no greater than 0.01° polarimetric root-mean-square noise (1 kHz bandwidth), and a 0.8 cm radial chord spacing are considered feasible based on the achieved performance of existing systems using similar wavelengths on fusion devices. Furthermore, synthetic diagnostic calculations taking various factors into account, such as diagnostic uncertainty and quality of magnetic flux surfaces, find that the edge current profile can be determined with up to 0.12 MA/m 2 uncertainty, or about 10% of the peak current density in the pedestal of an investigated high-confinement plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Modeling transient edge plasma transport with dynamic recycling

The work presents numerical simulation studies of the role that dynamic plasma recycling on the main wall and divertor target surfaces plays in transient edge plasma transport phenomena, such as edge localized modes (ELMs). The studies are performed by coupling the edge plasma transport code UEDGE [Rognlien et al., J. Nucl. Mater. 196–198, 347 (1992)] and the wall reaction–diffusion transport code FACE [Smirnov et al., Fusion Sci. Technol. 71, 75 (2017)]. The two-dimensional, time-dependent, two-way coupling of the codes, in a realistic tokamak geometry, is accomplished using the Integrated Plasma Simulator framework [Elwasif et al., in 18th Euromicro Conference on Parallel, Distributed and Network-Based Processing (PDP 2010), Pisa, Italy (IEEE, 2010), pp. 419–427] for all modeled material plasma boundaries. The simulations show that dynamic plasma recycling has substantially different characteristics on the main wall and on the divertor plates. It is demonstrated that during an ELM cycle the outer wall can dynamically absorb and release a number of particles comparable to that expelled by the ELM from the core plasma, by far exceeding the dynamic retention capacity of the divertor surfaces. The resulting evolution of the edge and divertor plasma conditions during an ELM cycle is analyzed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Divertor detachment characterization in negative triangularity discharges in DIII-D via 2D edge-plasma transport modeling

Edge fluid modeling of the first divertor-plasma detachment experiments in negative triangularity (NT) discharges in the DIII-D tokamak is presented using the 2D multifluid edge transport code UEDGE, including cross-field particle drifts. Experiments were performed where the lower single-null magnetic equilibrium had a strong NT (δ≈−0.5), that is, where the magnetic X-point is at a larger major radius than the core magnetic axis. Divertor-plasma detachment was induced by increasing the core plasma density in DIII-D via intrinsic gas puffing. Here density scans are performed with UEDGE to reach a detached plasma and to quantitatively recover the experimental rollover of the ion saturation current on the outer divertor target plate. The simulations cover experiments with both signs of the toroidal magnetic field, B T , where the ion magnetic Grad-B drifts are directed into (forward B T ) and out of (reverse B T ) the divertor region. Consistent with experiments with neutral beam power injection, the NT simulations reproduce: 40% higher density is needed to reach detachment onset with forward B T compared with reverse B T , and the absence of deep detachment is found with reverse B T . Similarly, comparison between Ohmic discharges in NT and positive triangularity (PT) shaping confirms that a substantially higher density is needed to achieve detachment in NT than in PT, with NT requiring an line-average density of at least the Greenwald density or higher. Simulation results suggest that higher densities are needed to reach detachment in negative compared to PT because these discharges have a shorter midplane-to-target distance along the total magnetic field B, a shorter outer divertor poloidal leg length (0.06 m vs 0.2 m), and reduced radial transport [near-scrape-off layer (SOL) D ⊥ /χ ⊥ =0.3/0.5 vs D ⊥ /χ ⊥ =1.0/1.0, all in (m 2 /s)].

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Modeling of carbon and tungsten transient dust influx in tokamak edge plasma

The paper presents computer simulation studies of burst injection of carbon and tungsten dust particles in DIII-D-like edge plasmas. The injection causes a large transient influx of the low- and high-Z impurities associated with the dust ablation in the plasmas. The dust transport and the effects of the ablated impurities on the edge plasma dynamics in a modern mid-size tokamak geometry are investigated for low- and high-power plasma discharge conditions. The core plasma contamination with dust-ablated impurities and the factors affecting it are evaluated.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Electromagnetic turbulence simulation of tokamak edge plasma dynamics and divertor heat load during thermal quench

Abstract The edge plasma turbulence and transport dynamics, as well as the divertor power loads during the thermal-quench phase of tokamak disruptions, are numerically investigated with BOUT++’s flux-driven six-field electromagnetic turbulence model. Here, transient yet intense particle and energy sources are applied at the pedestal top to mimic the plasma power drive at the edge induced by a core thermal collapse, which flattens the core temperature profile. Interesting features, such as surging of divertor heat load (up to 50 times) and broadening of heat-flux width (up to four times) on the outer-divertor target plate, are observed in the simulation, in qualitative agreement with experimental observations. The dramatic changes in divertor heat load and width are due to the enhanced plasma turbulence activities inside the separatrix. Two cross-field transport mechanisms, namely, the E × B turbulent convection and the stochastic parallel advection/conduction, are identified to play important roles in this process. First, an elevated edge pressure gradient drives instabilities and subsequent turbulence in the entire pedestal region. The enhanced turbulence not only transports particles and energy radially across the separatrix via the E × B convection, which causes the initial divertor heat-load burst, but it also induces amplified magnetic fluctuation B ˜ . Once themagnetic fluctuation is large enough to break the magnetic flux surface, magnetic flutter effect provides an additional radial transport channel. In the late stage of our simulation, | B ˜ r / B 0 | reaches to 10 −4 level that completely breaks magnetic flux surfaces such that stochastic field lines are directly connecting pedestal top plasma to the divertor target plates or first wall, further contributing to the divertor heat-flux width broadening.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Lagrangian conditional statistics and flow topology in edge plasma turbulence

Lagrangian statistics and particle transport in edge plasma turbulence are investigated using the Hasegawa–Wakatani model and its modified version. The latter shows the emergence of pronounced zonal flows. Different values of the adiabaticity parameter are considered. The main goal is to characterize the role of coherent structures, i.e., vortices and zonal flows, and their impact on the Lagrangian statistics of particles. Computationally intensive long time simulations following ensembles of test particles over hundreds of eddy turnover times are considered in statistically stationary turbulent flows. The flow topology is characterized using the Lagrangian Okubo–Weiss criterion in order to split the flow into topologically different domains. In elliptic and hyperbolic regions, the probability density functions (PDFs) of the residence time have self-similar algebraic decaying tails. However, in the intermediate regions, the PDFs exhibit exponentially decaying tails. Topologically conditioned PDFs of the Lagrangian velocity, and acceleration and density fluctuations are likewise computed. The differences between the classical Hasegawa–Wakatani system and its modified version are assessed, and the role of zonal flows is highlighted. Here, the density flux spectrum, which characterizes the contributions of different length scales, is studied, and its inertial scaling is found to be in agreement with predictions based on dimensional arguments. Analyzing the angular change of particle tracers at different time scales, corresponding to coarse grained curvature, completes the study, and these multiscale geometric statistics quantify the directional properties of the particle motion in different flow regimes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Modelling of edge plasma dynamics with active wall boundary conditions

A self-consistent 2D model is presented for transport in boundary plasma and plasma-facing material walls. Plasma dynamics in the domain is represented by a 2D collisional plasma fluid model in the edge-plasma code UEDGE, and transport of hydrogen and heat in the wall is represented by a system of reaction–diffusion equations in the 1D wall code FACE. To account for variation of parameters along the wall, in the coupled model multiple instances of the FACE code run in parallel. Here, the coupled model provides a tool for investigating a range of dynamic plasma–material interactions phenomena in 2D. For demonstration of its capability, one application of particular interest is the role of active wall in tokamak strike point sweeping proposed for mitigation of divertor heat loads. In the present study, the coupled calculations are applied to investigation of the impact of heat and hydrogen transport in the material wall on the divertor plasma and target heat load during sweeping of the target strike point for parameters of a high-power tokamak.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Energetic ions influence the plasma edge

Energetic ions in nuclear fusion devices influence the behaviour of modes at the plasma edge, potentially increasing the risk for particle losses and damages to the device. This introduces additional challenges for the development of fusion reactors.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Autoregressive long-horizon prediction of plasma edge dynamics *

Accurate modeling of scrape-off layer (SOL) and divertor-edge dynamics is vital for designing plasma-facing components in fusion devices. High-fidelity edge fluid/neutral codes such as SOLPS-ITER capture SOL physics with high accuracy, but their computational cost limits broad parameter scans and long transient studies. We present transformer-based, autoregressive surrogates for efficient prediction of 2D, time-dependent plasma edge state fields. Trained on SOLPS-ITER spatiotemporal data for the KSTAR tokamak, the surrogates forecast electron temperature, electron density, and radiated power over extended horizons. We evaluate model variants trained with increasing autoregressive horizons (1–100 steps) on short- and long-horizon prediction tasks. Longer-horizon training systematically improves rollout stability and mitigates error accumulation, enabling stable predictions over hundreds to thousands of steps and reproducing key dynamical features such as the motion of high-radiation regions. Measured end-to-end wall-clock times show the surrogate is orders of magnitude faster than SOLPS-ITER, enabling rapid parameter exploration. Prediction accuracy degrades when the surrogate enters physical regimes not represented in the training dataset, motivating future work on data enrichment and physics-informed constraints. Overall, this approach provides a fast, accurate surrogate for computationally intensive plasma edge simulations, supporting rapid scenario exploration, control-oriented studies, and progress toward real-time applications in fusion devices.

autoregressive deep learning↗
DOE OSTI2021

Summary of 2020 edge-plasma modeling for FNSFand plans for 2021

This year, following the study of liquid-wall options, our edge-plasma modeling has returned to analyzing issues associated with a solid tungsten-wall, Fusion Nuclear Science Facility (FNSF)-size device, primarily using the 2D UEDGE plasma/neutral transport code. The focus is to predict plasma/neutral heat and particle fluxes to various wall components and determine the concentration of injected and wall-sputtered impurities that reach the core plasma region. Our models have been advanced in a number of areas compared to the initial modeling done in the 2017 timeframe: this year we include each individual charge-state of impurity ions instead of assuming a fixed concentration of impurities relative to the deuterium-tritium (DT) fuel plasma, including the interaction between inner and outer divertor legs. Here edge fueling of the impurity and pumping in the private-flux region is incorporated. Increasingly detailed atomic-physics rate files for impurity radiation have been compared, as well as the role of molecules. The impact of spatial variation of the turbulence-driven radial plasma transport is considered to contribute to the understanding of the heat-flux-limit effects of choosing a double-null or single-null divertor configuration. Detailed plasma/neutral wall fluxes, densities, and temperatures have been provided to the ERO group for their more detailed studies of wall sputtering and near-surface impurity transport.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Effect of edge plasma density on hot spot in LHCD plasma in EAST

Hot spots are a serious challenge limiting long pulse operation with lower hybrid current drive (LHCD) in tokamaks. Here, in order to mitigate hot spots in the guard limiter and improve LHCD capability, the effect of edge plasma density on inducing hot spots and current drive has been studied in EAST. The temperature in the guard limiter of the LH antenna, inducing hot spot directly, increases with edge density and LH power. Studies show that the hot spot is mainly ascribed to the heat flux in front of LH antenna. Further simulation indicates that such spots correspond to the peak position of edge density due to local LH electric field. In addition, due to the stronger parametric instability (PI) behavior in the case of higher edge density, the current drive capability decreases with edge density. Strike-point splitting behaviour appears as density increase, in agreement with current profiles in the edge region and the reduction of total driven current, suggesting that more power is deposited in the edge region, which then contributes more to hot spot formation. These studies offer one possible idea to optimize the edge density so as to satisfy the coupling, mitigate the heat flux in the guard limiter, and improve current drive capability in fusion devices.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Simulations of tokamak edge plasma turbulent fluctuations based on a minimal 3D model

In this study, a new simulation model for tokamak boundary plasma, SOLT3D, is implemented in the BOUT++ framework. The simulation model includes a set of dynamic equations describing collisional boundary plasma and neutral gas in the tokamak scrape-off layer and divertor region. The model is verified against standard linear plasma instabilities and available nonlinear results. For L-mode like conditions, SOLT3D reproduces characteristics of boundary plasma turbulent fluctuations that are similar to published experimental data, in terms of the amplitude and spatial dependence of the fluctuations. It also reproduces realistic plasma fluxes on material surfaces and expected Bohm-like effective radial transport. Plasma fluctuations inferred from the simulations imply inevitably a significant level of intrinsic 'noise' for axisymmetric tokamak plasma transport modeling, introducing errors on the order of unity. In particular, the toroidally averaged atomic rates below 5–10 eV are strongly modified by turbulent plasma fluctuations, which should significantly affect the standard axisymmetric modeling of the tokamak edge plasma and divertor.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Mitigation of ICRF—edge plasma interaction in Alcator C-Mod

The parasitic interaction between ion cyclotron range of frequencies (ICRF) waves and the edge plasma has long limited high-power ICRF utilization in magnetically confined fusion plasmas. In this paper, we report on the successful mitigation of this interaction by power tapering a four-strap field-aligned (FA) antenna in the Alcator C-Mod tokamak. With the antenna operated in dipole phasing ($0\pi0\pi$), the ratio of the power coupled by the central two straps ($P_\mathrm {cent}$) to the power coupled by the outer two straps was varied at fixed total coupled ICRF power ($P_\mathrm {tot}$). With $P_\mathrm {cent}$/$P_\mathrm {tot} \approx 0.8-0.9$, no enhancement of the plasma potential was measured despite 1 MW of coupled ICRF power. When the antenna is powered, energy deposition increases on its four corners and on neighboring limiter tiles magnetically connected to some of those corners. The energy deposited on the antenna and limiter is minimized together with near-field plasma potentials. Additionally, we show that deviation from $P_\mathrm {cent}$/$P_\mathrm {tot} \approx 0.8$ enhances wave-plasma interactions in places not magnetically connected to the antenna. These far-field effects are correlated with changes in the antenna spectrum. Hence, on C-Mod, near-field and far-field interactions were minimized for about the same range of $P_\mathrm {cent}$/$P_\mathrm {tot}$. Optimal power tapering was also found to improve ICRF heating efficiency and facilitate H-mode access. Finally, we show that the heat flux pattern on the toroidally aligned antennas reverses with the direction of the RF-induced E×B flow in front of the antenna, a correlation not observed for the FA antenna. We argue that the RF-induced E×B flow, which carries high-density plasma from the near-SOL, is aligned with the FA antenna and does not intercept its corners, where the plasma potential is large. This could explain the previously reported smaller impurity generation by the FA antenna (Wukitch et al 2013 Phys. Plasmas 20 056117).

Alcator C-Mod↗