Search NASA⌕ Search

SEARCH · Search NASA

Results for “plastic deformation olivine”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

8 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2014

Impact-Induced Chondrule Deformation and Aqueous Alteration of CM2 Murchison

Deformed chondrules in CM2 Murchison have been found to define a prominent foliation [1,2] and lineation [3] in 3D using X-ray computed tomography (XCT). It has been hypothesized that chondrules in foliated chondrites deform by "squeezing" into surrounding pore space [4,5], a process that also likely removes primary porosity [6]. However, shock stage classification based on olivine extinction in Murchison is consistently low (S1-S2) [4-5,7] implying that significant intracrystalline plastic deformation of olivine has not occurred. One objective of our study is therefore to determine the microstructural mechanisms and phases that are accommodating the impact stress and resulting in relative displacements within the chondrules. Another question regarding impact deformation in Murchison is whether it facilitated aqueous alteration as has been proposed for the CMs which generally show a positive correlation between degree of alteration and petrofabric strength [7,2]. As pointed out by [2], CM Murchison represents a unique counterpoint to this correlation: it has a strong petrofabric but a relatively low degree of aqueous alteration. However, Murchison may not represent an inconsistency to the proposed causal relationship between impact and alteration, if it can be established that the incipient aqueous alteration post-dated chondrule deformation. Methods: Two thin sections from Murchison sample USNM 5487 were cut approximately perpendicular to the foliation and parallel to lineation determined by XCT [1,3] and one section was additionally polished for EBSD. Using a combination of optical petrography, SEM, EDS, and EBSD several chondrules were characterized in detail to: determine phases, find microstructures indicative of strain, document the geometric relationships between grain-scale microstructures and the foliation and lineation direction, and look for textural relationships of alteration minerals (tochilinite and Mg-Fe serpentine) that indicate timing of their formation relative to deformation event(s). Preliminary Results: Deformed chondrules are dominated by forsterite and clinoenstatite with lesser amounts of Fe-Mg serpentine, sulfides, and low calcium pyroxene. Olivine grains are commonly fractured but generally show sharp optical extinction. The pyroxene, in contrast, is not only fractured but also often displays undulose extinction. In addition, the clinoenstatite is frequently twinned but it is unclear whether the twins are the result of mechanical deformation or inversion from protoenstatite [8]. EBSD work is currently ongoing to determine if areas of higher crystallographic strain can be imaged and mapped, and to determine the pyroxene twin orientations. In regards to alteration, we have found evidence for post-deformation formation of tochilinite and Mg-Fe serpentine indicating that aqueous alteration has indeed post-dated the deformation of the chondrules.

Hanna, R. D.↗
NASA NTRS1984

Strain analysis of the Leoville chondrite and conditions in asteroidal interiors

Deformed chondrules in the Leoville carbonaceous chondrite define a preferred orientation, also recognized previously in other CV3 chondrites. Identifying the strain mechanism is necessary for understanding the conditions which caused this compressional shortening. Luckly, the major mineralogical constituent of CV3 meteorites is olivine, for which experimental data on strain mechanisms exist. The conditions that caused strain in the olivine were obviously applicable to the whole meteorite. Possible mechanisms of olivine deformation are cataclasis, low temperature plasticity, power low creep, and diffusional flow, each of which occurs under different combinations of temperature and deviatoric stress. Cataclasis can be ruled out on the basis of its high deviatoric stress requirements; some fractures occur in chondrule olivines, but these may have formed during excavation or impact. Low temperature plasticity and power low creep occur by means of various types of lattice dislocations. However, methods of thermal decoration and chemical etching of dislocations failed to indicate evidence for either mechanism. Thus, the inference is that diffusional flow, characteristic of low to moderately high temperatures and low deviatoric stress, was the major deformation mechanism.

Cain, P. M.↗
NASA NTRS2019

3d Crystallographic Orientation of Olivine in Bjurböle Chondrules

The crystallographic orientations of chondrule minerals can provide important insights into their formation and deformational history. For example, the orientations of the olivine bars and surrounding rim in barred olivine chondrules provide information and on the conditions of crystallization and the orientations and shapes of olivines within porphritic chondrules can record the reactions with the surrounding nebular gas during chondrule formation. Later deformation on the parent body can cause crystal-plastic deformation of chondrule minerals that is evident through their intracrystalline lattice misorientations. Typically these crystal orientations and lattice misorientations are determined using electron backscatter diffraction (EBSD) on thin sections but this gives only a 2D picture for what is actually a 3D texture. While it is possible to combine EBSD with serial sectioning to build a 3D dataset of texture, this is a destructive, time-intensive process. A recent technological development that enables non-destructive, 3D crystallographic orientation measurement is X-ray diffraction contrast tomography (DCT), which uses the X-ray diffraction of the crystal lattice to determine orientation. Originally only possible using monochromatic X-ray beams at 3rd generation synchrotron light sources, DCT has been recently adapted to polychromatic sources of laboratory X-ray microscopes (referred to as Lab-DCT). Up to this point LabDCT has only been applied to large, well-formed crystals of high symmetry (i.e., metals), but we recently acquired DCT datasets for a pair Bjurböle chondrules to determine the applicability of the technique to natural, mutlimineralic samples composed predominately of olivine (i.e., chondrules).

Hanna, R. D.↗
NASA NTRS2013

Strain Measurements of Chondrules and Refraction Inclusion in Allende

This study uses traditional strain measurement techniques, combined with X-ray computerized tomography (CT), to evaluate petrographic evidence in the Allende CV3 chondrite for preferred orientation and to measure strain in three dimensions. The existence of petrofabrics and lineations was first observed in carbonaceous meteorites in the 1960's. Yet, fifty years later only a few studies have reported that meteorites record such features. Impacts are often cited as the mechanism for this feature, although plastic deformation from overburden and nebular imbrication have also been proposed. Previous work conducted on the Leoville CV3 and the Parnallee LL3 chondrites, exhibited a minimum uniaxial shortening of 33% and 21%, respectively. Petrofabrics in Allende CV3 have been looked at before; previous workers using Electron Back Scatter Diffraction (EBSD) found a major-axis alignment of olivine inside dark inclusions and an "augen"-like preferred orientation of olivine grains around more competent chondrules

Tait, Alastair W.↗
NASA NTRS2004

Shock Effects in the Metal-rich Chondrites QUE 94411, Hammadah al Hamra 237 and Bencubbin

We have studied the metal-rich chondrites QUE94411 (QUE), Hammadah al Hamra 237 (HH237) and Bencubbin with an emphasis on the petrographical and mineralogical effects of the shock processing that these meteorite assemblages have undergone. Iron-nickel metal and chondrule silicates are the main components in these meteorites. These high-temperature components are held together by shock melts consisting of droplets of dendritically intergrown FeNi metal/sulfide embedded in ferrous silicate glass. The silicate glass component of the shock melt is substantially more FeO-rich (FeO: 30 to 40 wt%) than the prevailing chondrule silicates (FeO less than 5 wt%). Fine-grained matrix material, which is a major component in most other chondritic assemblages, is extremely scarce in QUE4411 and HH237; it has not been observed in Bencubbin. This material occurs as rare, hydrated, and fine-grained matrix lumps with major and minor element abundances roughly similar to the ferrous silicate shock melts (and CI). We infer that hydrated, fine-grained material, compositionally similar to these matrix lumps, was originally present between the FeNi metal grains and chondrules, but was preferentially heated by the shock wave and melted. Other shock-related features in QUE94411, HH237, and Bencubbin include a distinct alignment and occasionally strong plastic deformation of metal and chondrule fragments. However, the existence of chemically zoned and metastable FeNi metal condensates condensates in direct contact with shock melts indicates that the shock did not substantially increase the average temperature of the aggregate. TEM analyses of the FeNi metal droplets embedded in the shock melts show martensitic crystal structures, indicating rapid cooling, essentially quenching, of the shock melts. These findings indicate that the preshock temperature of the assemblage was low. Because porphyritic olivine-pyroxene chondrules are absent in QUE94411, HH237, and Bencubbin, it is difficult to determine the precise shock stage of these meteorites, but the shock was probably relatively light (S2- S3; 5-20 GPa) consistent with a bulk temperature increase of the assemblages of less than 200 C. The higher pressures within this range (i.e. 15-20 GPa) are consistent with the findings of shock produced diamonds in Bencubbin. The many mineralogical, petrological and isotopic (e.g. O and N) similarities between Bencubbin, Weatherford, Gujba and QUE/HH237 have been used to argue for a common origin of these meteorites on a single asteroidal parent body. The findings of this study, which indicate similar shock processing, lend support to this view.

Meibom, A.↗