High-Pressure X-ray Diffraction and Vibrational Spectroscopy of Polyethylene: Evidence for a Structural Phase Transition
Abstract not provided
Dattelbaum, D. M.↗
SEARCH · Search NASA
Results for “polyethylene”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
TEX-Chlorine Assemblies: Highly Enriched Uranium Plates with Sodium Chloride Absorbers Using Polyethylene Moderator and Polyethylene Reflector
This evaluation documents highly enriched uranium (HEU) experimental critical configurations with polyethylene moderators and sodium chloride absorbers conducted as part of the United States Nuclear Criticality Safety Program’s Thermal/Epithermal eXperiments (TEX) program. HEU-MET-MIXED-021 provides the benchmark evaluation of five TEX experiments designed to establish baseline configurations with HEU Jemima plates moderated by high density polyethylene (HDPE). The TEX-HEU experiments were designed to cover five different fission energy regimes by varying the thickness of the interstitial HDPE moderator, with varying fractions of thermal, intermediate, and fast fissions, and to be easily modified to accommodate test materials of interest. HEU-MET-INTER-013 documents the first TEX-HEU variation, incorporating hafnium in seven different experimental configurations. This evaluation covers an additional variant that incorporates absorber plates of compacted high-purity sodium chloride salt. These experiments were motivated by a criticality safety need for validation data for uranium purification by means of electrorefining with chloride salts, especially thermal and intermediate energy configurations resulting from moderator upset conditions, and their design was optimized by matching sensitivity profiles from application cases. All three experimental configurations are judged to be acceptable as benchmark cases. The main parameter varied between the configurations is the thickness of the polyethylene moderators and the sodium chloride absorbers between the HEU plates. Varying the thickness of the polyethylene tunes the neutron energy spectrum between majority thermal (Case 1 and 2) and intermediate (Case 3). The fission fractions, presented in Table 1, are determined calculationally. Case 3 is cross listed as HEU-MET-INTER-014.
42 ENGINEERING↗
Life cycle greenhouse gas emissions and energy use of polylactic acid, bio-derived polyethylene, and fossil-derived polyethylene
Bioplastics recently have become an attractive, viable, and popular alternative to conventional petroleum-based plastics, with the hope that replacing fossil-derived plastics with renewable alternatives will reduce greenhouse gas (GHG) emissions and fossil energy consumption (FEC). The bioplastic industry is encouraging creative designs and enhanced properties such as biodegradability, which is considered a sustainable solution for waste plastic management. However, biodegradability also means that carbon in the product is emitted to the atmosphere as GHG emissions. In this paper, a life cycle analysis (LCA) of biodegradable polylactic acid (PLA) and bio-polyethylene (bio-PE) plastics was conducted to understand the environmental effects of these bioplastics from feedstock production to product end-of-life (EOL). In particular, emissions from biodegradability (EOL emissions) are accounted for. The results were compared to those of conventional fossil-based plastics such as high-density polyethylene (HDPE) and low-density polyethylene (LDPE). Results showed that the lowest GHG emissions (-1.0 and 1.7 kg CO 2 e per kg for bio-PE and PLA with no biodegradation, respectively) and FEC (29 and 46 MJ per kg of bio-PE and PLA, respectively) were achieved with bio-derived plastics, particularly bio-PE plastic. However, despite the benefits of biogenic carbon uptake, when landfill and composting emissions were considered for the PLA pathway, the life cycle emissions of PLA increase significantly, from 16% to 163% depending on the biodegradation condition, compared to the case where there is no degradation in the landfill. This study also contributed to understand the effects on the GHG emissions of biodegradability in landfill and composting scenarios, regional electricity mix, and plastics manufacturing technologies. (C) 2020 The Authors. Published by Elsevier Ltd.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Role of Bifunctional Ru/Acid Catalysts in the Selective Hydrocracking of Polyethylene and Polypropylene Waste to Liquid Hydrocarbons
Hydrogenolysis of C–C bonds over Ru-based catalysts has emerged as a deconstruction strategy to convert single-use polyolefin waste to liquid alkanes at relatively mild conditions, but this approach exhibits limitations, including methane formation resulting from terminal C–C bond scission. In this study, a variety of catalysts were investigated for the reductive deconstruction of polyethylene (PE) and polypropylene (PP) to identify supports that promote nonterminal C–C bond scission. We found that Ru nanoparticles supported on Brønsted-acidic zeolites with the faujasite (FAU) and Beta (BEA) topologies were highly active for the cleavage of C–C bonds in PE and PP, exhibiting improved liquid yields and suppressed methane formation. For the deconstruction of PE, supporting ruthenium nanoparticles (5 wt %) on FAU increased the yields of liquid alkanes to 67% compared to 33% over an inert silica support (5 wt % Ru/SiO 2 ) at 200 °C, 16 h, under 30 bar of H2. A dramatic selectivity enhancement toward liquid hydrocarbons was also observed for PP over Ru/FAU and Ru/BEA compared to Ru/SiO 2 . To understand the origin of this selectivity improvement, a combination of ex situ and operando characterization techniques were used to reveal that both catalyst structure and acidity play key roles in PE and PP conversion. Operando X-ray absorption spectroscopy studies with model polyolefins over Ru-supported catalysts with varying acidity levels revealed that the local chemical environment of Ru [0] during the reaction is consistent across multiple acidic supports, although the onset of reduction during synthesis of the nanoparticles varies across different supports. These results, combined with reactivity data, demonstrate the importance of the acid-noble metal cooperativity in promoting selective C–C bond scission toward liquid alkanes that shifts the mechanism from hydrogenolysis to ideal hydrocracking.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
STUDIES ON PIPELINE POLYETHYLENES IN HYDROGEN GAS ENVIRONMENTS USING IN-SITU AND EX-SITU CHARACTERIZATION METHODS
Polymeric materials are commonplace in the natural gas infrastructure as distribution pipes, coatings, seals, and gaskets. Under the auspices of the U.S. Department of Energy HyBlend program, one of the means to reduce greenhouse gas emissions is with replacing natural gas, either partially or completely, with hydrogen. This approach makes it imperative that we conduct near-term and long-term materials compatibility research in these relevant environments. Insights into the effects of hydrogen and hydrogen gas blends on polymer integrity can be gained through both ex-situ and in-situ analytical methods. Our work represented here highlights a study of the behavior of pipeline polyethylene (PE) materials, including HDPE (Dow 2490 and GDB50) and MDPE (Ineos and legacy Dupont Aldyl A), when exposed to hydrogen by means of in-situ X-ray scattering and ex-situ Raman spectroscopy techniques. Samples were tested in ex-situ hydrogen and argon gas environments and in-situ hydrogen environments to identify differences due to permeation and solubility of these gases. These methods complemented each other because Raman spectroscopy could capture permanent effects after materials were removed from gaseous environments, and in-situ X-ray scattering analysis collected real-time data to elucidate the impact of the gas environment on polymer microstructure. Data collected revealed that the aforementioned polymers did not show significant changes in crystallinity and microstructure under the exposure conditions tested. Our findings from these studies will help establish real-time effects caused by hydrogen gas transport through pipeline polyethylenes by way of its influence on polymer structure and chemistry, which is directly related to pipeline mechanical strength and longevity of service.
Hydrogen materials compatibility, Natural gas pipe↗
TEX-Hf Assemblies: Highly Enriched Uranium Plates with Hafnium Using Polyethylene Moderator and Polyethylene Reflector
This report documents the integral experiment evaluation and publication for IER-532 (TEX-Hf), Thermal/Epithermal eXperiments (TEX) with highly enriched uranium (HEU) fuel and hafnium (Hf), moderated and reflected by polyethylene. The design of TEX-Hf is a variation of IER-297 (TEX-HEU), with the inclusion of hafnium as a diluent material. The experiment and evaluation include seven configurations, all of which were acceptable as benchmark cases. These benchmark cases provide validation for hafnium in the thermal, intermediate, and fast neutron energy regimes by maximizing the sensitivity in k eff to the hafnium cross sections. The evaluation was reviewed and accepted by the International Criticality Safety Benchmark Evaluation Project (ICSBEP) Technical Review Group on April 17, 2024, and was submitted to the ICSBEP in August 2024 following subgroup approval.
42 ENGINEERING↗
Effect of pyrolysis operating conditions on the catalytic co‐pyrolysis of low‐density polyethylene and polyethylene terephthalate with zeolite catalysts
Abstract In this study, the catalytic (co‐)pyrolysis of low‐density polyethylene (LDPE) and polyethylene terephthalate (PET) with HZSM‐5 and HY zeolite catalysts was conducted in a micro‐pyrolysis reactor coupled to a two‐dimensional gas chromatography system. Pyrolysis operating conditions, such as the pyrolysis temperature, the catalyst to feedstock (CF) ratio, and the LDPE:PET ratio, were varied. It was found that for the co‐pyrolysis of LDPE and PET, HZSM‐5 led to higher yields of C2‐C4 olefins and monoaromatic products. Lower CF ratios increased the yield of C2‐C4 olefins for LDPE pyrolysis, but decreased benzene yield for PET pyrolysis, concomitant with an increased yield in benzoic acid. A lower temperature of 400°C which was sufficient for the pyrolysis of LDPE, led to incomplete conversion of PET. Surface response diagrams were used to visualize the impact of the various pyrolysis operating conditions on the yield of C2‐C4 olefins and BTEX, which serve as target products for the circular economy.
Okonsky, Sean Timothy↗
Repurposing Post-Consumer Polyethylene to Access Cross-Linked Polyethylene with Reprocessabilty, Recyclability, and Tunable Properties
Polyethylene (PE) is the most widely produced plastic but accumulation and resistance to degradation has significantly contributed to the plastic waste crisis. Upcycling has presented promising solutions to transform PE waste into value-added products. In this study, mixed post-consumer PE was successfully repurposed into reprocessable and chemically recyclable cross-linked polyethylene (XLPE). This process involved converting PE into telechelic oligomers, followed by repolymerization using a hybrid cross-linking system consisting of a dynamic cross-linker 2,4,6-triethoxy-1,3,5-triazine (TETA) and non-dynamic cross-linker tris(6-isocyanatohexyl)isocyanurate (Tri-HDI). In the resulting XLPE, TETA facilitated iterative reprocessing with minimal property degradation across cycles, whereas Tri-HDI helped preserve functional performance throughout service life. Compared to PE, XLPE exhibited enhanced mechanical properties, reduced creep deformation under application-relevant temperatures, and high temperature structural stability. Notably, copolymerizing PE oligomers with commercial macrodiols was employed to create composite XLPEs, enabling tuning material properties. After use, XLPE can be efficiently and selectively depolymerized under mild conditions, even when mixed with commercial insulator cables. This depolymerization allows for the recovery of the constituent building blocks, enabling purification and subsequent repolymerization for reuse. This approach demonstrates the potential of repurposing plastic waste into sustainable materials and fostering the development of a circular economy.
INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CHEMI↗
Polyethylene glycol as a robust, biocompatible encapsulant for two-stage treatment of food and beverage wastewater
Polyethylene glycol beads encapsulating anaerobic microbes developed for on-site food and beverage wastewater treatment.
Engineering↗
Chemical Upcycling of Polyethylene, Polypropylene, and Mixtures to High-Value Surfactants
Conversion of plastic wastes to fatty acids is an attractive means to supplement the sourcing of these high-value, high-volume chemicals. We report a method for transforming polyethylene (PE) and polypropylene (PP) at ~80% conversion to fatty acids with number-average molar masses of up to ~700 and 670 daltons, respectively. The process is applicable to municipal PE and PP wastes and their mixtures. Temperature-gradient thermolysis is the key to controllably degrading PE and PP into waxes and inhibiting the production of small molecules. The waxes are upcycled to fatty acids by oxidation over manganese stearate and subsequent processing. PP ..beta..-scission produces more olefin wax and yields higher acid-number fatty acids than does PE ..beta..-scission. We further convert the fatty acids to high-value, large-market-volume surfactants. Industrial-scale technoeconomic analysis suggests economic viability without the need for subsidies.
deconstruction↗
Evaluation of Polyethylene and Blank Pulsed Sphere Experiments Using Deuteron Transport Feature in COG
From the late 1960s to about 1985, LLNL undertook a series of ‘pulsed sphere’ experiments for 31 materials involving 148 different experiments using 75 different spheres. The purpose was to measure the neutron leakage spectra for different materials from 14-MeV neutrons generated by 3 H(d,n) 4 He reactions induced by an incident D+ beam from the Insulated Core Transfer (ICT) accelerator at LLNL. This deuteron beam was focused to impinge upon tritium loaded onto a titanium substrate within a low mass target assembly placed within the center of a spherical shell constructed from the material of interest. COG is a three-dimensional, continuous energy, Monte Carlo code, developed by Lawrence Livermore National Laboratory (LLNL). Recent additions to COG include alpha and deuteron particle transport in order to directly calculate (α,n) and 3 H(d,n) 4 He reactions, and resulting neutron emission spectra. Results of the direct deuteron transport calculation for the 0.8 MFP (mean free path) polyethylene sphere with PILOT B detector was previously published. The purpose of this paper is to present expanded COG results showing the neutron peak from deuterium buildup ( 2 H(d,n) 3 He) due to tritium decay in the target. Cross section data libraries used are ENDF/B-VIII.0 for neutrons and ENDF/B-VII.1 for deuterons, respectively.
73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
On the structure of disordered regions in polyethylene single crystals and in drawn polyethylene
Structure of disordered regions in polyethylene single crystals and in drawn polyethylene
Fischer, E. W.↗
Graphite/Ultra-High Modulus Polyethylene Hybrid Fiber Composites with Epoxy and Polyethylene Matrices for Cosmic Radiation Shielding
One of the most significant technical challenges in long-duration space missions is that of protecting the crew from harmful radiation. Protection against such radiation on a manned Mars mission will be of vital importance both during transit and while on the surface of the planet. The development of multifunctional materials that serve as integral structural members of the space vehicle and provide the necessary radiation shielding for the crew would be both mission enabling and cost effective. Additionally, combining shielding and structure could reduce total vehicle mass. Hybrid laminated composite materials having both ultramodulus polyethylene (PE) and graphite fibers in epoxy and PE matrices could meet such mission requirements. PE fibers have excellent physical properties, including the highest specific strength of any known fiber. Moreover, the high hydrogen (H) content of polyethylene makes the material an excellent shielding material for cosmic radiation. When such materials are incorporated into an epoxy or PE matrix a very effective shielding material is expected. Boron (B) may be added to the matrix resin or used as a coating to further increase the shielding effectiveness due to B s ability to slow thermal neutrons. These materials may also serve as micrometeorites shields due to PE s high impact energy absorption properties. It should be noted that such materials can be fabricated by existing equipment and methods. It is the objective of this work therefore to: (a) perform preliminary analysis of the radiation transport within these materials; (b) fabricate panels for mechanical property testing before and after radiation exposure. Preliminary determination on the effectiveness of the combinations of material components on both shielding and structural efficiency will be made.
Source record↗
Understanding Strain and Failure of a Knot in Polyethylene Using Molecular Dynamics with Machine-Learned Potentials
A neural network potential (NNP) has been developed by fitting to ab initio electronic structure data on hydrocarbons and is used to study failure of linear and knotted polyethylene (PE) chains. A linear PE chain must be highly strained before breaking as the stress is equally distributed across the chain. In contrast, the stress in a PE chain with a 31 or overhand knot, accumulates at the knot’s entrance/exit. We find the strain energy is greatest when the bond length and angle are strained simultaneously, and that the knot weakens the chain by increasing the variance of the C–C–C angle, thereby allowing rupture at lower bond strains. Here, we extend our analysis to both 51 and 52 knots and find that both break at the entrance/exit of a loop. Notably, molecular scale PE knots exhibit many of the same characteristics as knots in a macroscopic rope, with stick–slip phenomena upon tightening and similar points of failure.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Laponite-Incorporated UiO-66-NH2-Polyethylene Oxide Composite Membranes for Protection against Chemical Warfare Agent Simulants
A strategy is developed to enhance the barrier protection of polyethylene oxide (PEO)-metal–organic framework (MOF) composite films against chemical warfare agent simulants. To achieve enhanced protection, an impermeable high-aspect-ratio filler in the form of Laponite RD (LRD) clay platelets was incorporated into a composite PEO film containing MOF UiO-66-NH 2 . The inclusion of the platelets aids in mitigating permeation of inert hydrocarbons (octane) and toxic chemicals (2-chloroethyl ethyl sulfide, 2-CEES) of dimensions/chemistry similar to prominent vesicant threats while still maintaining high water vapor transport rates (WVTR). By utilizing small-angle neutron scattering, small-angle X-ray scattering, and wide-angle X-ray scattering, the LRD platelet alignment of the films was determined, and the structure of the films was correlated with performance as a barrier material. Performance of the membranes against toxic chemical threats was assessed using permeation testing of octane and 2-CEES, a common simulant for the vesicant mustard gas, and breathability of the membranes was assessed using WVTR measurements. To assess their robustness, chemical exposure (in situ diffuse reflectance infrared Fourier transform spectroscopy) and mechanical (tensile strength) measurements were also performed. It was demonstrated that the barrier performance of the film upon inclusion of the LRD platelets exceeds that of other MOF-polymer composites found in the literature and that this approach establishes a new path for improving permselective materials for chemical protection applications.
36 MATERIALS SCIENCE↗
Virgin-like High-Density Polyethylene from Recycled Mixed Polyolefins
Reported herein is the compatibilization of mixed polyolefins containing a rheology modifier (M-PO RM ) derived from municipal solid waste (MSW) by using different types of compatibilizers. One compatibilizer was produced “in situ” during reactive extrusion (REX), and the other compatibilizers were commercial styrenic block copolymer and maleated polymer-based compatibilizers. Both “in situ” and commercial compatibilizers were first used in laboratory-controlled polyolefins containing a rheology modifier (denoted as L-PO RM ) and were investigated for their mechanical properties. The study was then extended to a rheology modifier containing recycled mixed polyolefins (M-PO RM ), where the effects of both compatibilizers were evaluated. Compared to the in situ and other commercial compatibilizers, the styrenic block copolymer offered superior performance, as it enabled the synthesis of virgin-like high-density polyethylene (HDPE) from the M-PO RM . The findings suggest that M-PO RM can be transformed into blends with virgin HDPE-like properties, thus offering an industrially relevant approach for the re- and upcycling of mixed polyolefins. Finally, the M-PO RM pellets with uniform MFI and good mechanical properties can be used as injection mold feedstocks for different applications such as in the construction and automotive sectors.
compatibilization↗
Cationic Tantalum Hydrides Catalyze Hydrogenolysis and Alkane Metathesis Reactions of Paraffins and Polyethylene
Sulfated aluminum oxide (SAO), a high surface area material containing sulfate anions that behave like weakly coordinating anions, reacts with Ta(=CH t Bu)(CH 2 t Bu) 3 to form [Ta(CH 2 t Bu) 2 (O–) 2 ][SAO] (1). Subsequent treatment with H 2 forms Ta–H + sites supported on SAO that are active in hydrogenolysis and alkane metathesis reactions. In both reactions Ta–H + is more active than related neutral Ta–H sites supported on silica. This reaction chemistry extends to melts of high-density polyethylene (HDPE), where Ta–H + converts 30% of a low molecular weight HDPE (M n = 2.5 kg mol –1 ; D = 3.6) to low molecular weight paraffins under hydrogenolysis conditions. Under alkane metathesis conditions Ta–H + converts this HDPE to a high MW fraction (M n = 6.2 kDa; D = 2.3) and low molecular weight alkane products (C 13 –C 32 ). Furthermore, these results show that incorporating charge as a design element in supported d 0 metal hydrides is a viable strategy to increase the reaction rate in challenging reactions involving reorganization of C–C bonds in alkanes.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗