Efficient conversion of lignin into a water-soluble polymer by a chelator-mediated Fenton reaction: optimization of H 2 O 2 use and performance as a dispersant
Transforming lignin into a water-soluble polymer.
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Transforming lignin into a water-soluble polymer.
Dissolution-based plastic recycling is a promising approach to separate and recover high quality pure polymer resins from multicomponent plastic waste by exploiting differences in polymer solubility. The design of a dissolution-based polymer recycling process requires the selection of appropriate solvent systems and operating temperatures to dissolve only target polymers. Determining these parameters experimentally is challenging due to the wide range of solvents and temperatures possible for a given set of target polymers. In this work, we report a computational scheme that employs molecular dynamics simulations and the Conductor-like Screening Model for Realistic Solvents to predict polymer solubilities. Using this scheme, we established a computational solubility database for 8 common polymers and 1007 solvents at multiple temperatures and measured selected solubilities experimentally to validate computational predictions. Analysis of functional groups within this large database then provides chemical heuristics relating the molecular structures of good and non-solvents for selected polymers. We further developed a tool that automates the selection of solvents for all possible sequences in which target polymers can be selectively dissolved to guide the design of dissolution-based plastic recycling processes. Here, we demonstrate the application of these methods via multiple experimental case studies of representative dissolution-based polymer recycling processes in which pure polymer resins were successfully recovered from physical mixtures of polymers.
One promising approach to recycle multicomponent plastic waste (e. g., multilayer plastic films) is selective dissolution. Selective dissolution is a solvent-mediated process in which differences in polymer solubility in a carefully chosen solvent system are exploited to recover a target polymer. Here, a computational approach was developed that rapidly predicts temperature-dependent polymer solubilities to guide the design of solvent systems for solvent-mediated polymer recycling. Polymer conformations were obtained from molecular dynamics simulations by modeling the polymer as a short oligomer and then used as input to the conductor-like screening model for real solvents (COSMO-RS) for solubility predictions. Using polyethylene (PE) and ethylene vinyl alcohol (EVOH) as representative polymers, the effect of simulation parameters was systematically studied, and predicted solubilities were found to be in good agreement with experimental measurements. Furthermore, the applicability of the approach was demonstrated by identifying selective solvents for PE and EVOH dissolution from a library of 524 solvents.
A force field (FF) analysis was performed on three water-soluble polymers (PAM, PNIPAAm, and PEO), that are of significant interest for biomedical applications, by measuring the polymer radius of gyration ( R g ), solvent accessible surface area (SASA), radial distribution functions ( g ( r )), and relative shape anisotropy ( κ 2 ) in dilute conditions. Three generalized FFs were utilized to model PAM and PNIPAAm (DREIDING, GAFF, and GAFF2) in conjunction with five water models: SPC, SPC/E, TIP3P, TIP4P, and TIP4P/2005. It was found that the DREIDING FF showed better agreement with PAM experimental data reported for R g , irrespective of the water model. For PNIPAAm, the DREIDING FF was also the best performing among the FFs studied; however, the choice of water model played an important role in the predicted properties. The trends in SASA and κ 2 are consistent with R g . For PEO modelled with the CHARMM C35r FF, all water models except TIP3P resulted in good agreement with experimental and previous simulation data. Furthermore these results highlight the considerable impact that polymer and water force fields can have on sampling appropriate polymer conformations in solvated systems.
Organic electronics promise to provide flexible, large-area circuitry such as photovoltaics, displays, and light emitting diodes that can be fabricated inexpensively from solutions. A major obstacle to this vision is that most conjugated organic materials are miscible, making solution-based fabrication of multilayer or micro- to nanoscale patterned films problematic. Here we demonstrate that the solubility of prototypical conductive polymer poly(3-hexylthiophene) (P3HT) can be reversibly "switched off" using high electron affinity molecular dopants, then later recovered with light or a suitable dedoping solution. Using this technique, we are able to stack mutually soluble materials and laterally pattern polymer films by evaporation or with light, achieving sub-micrometer, optically limited feature sizes. After forming these structures, the films can be dedoped without disrupting the patterned features; dedoped films have identical optical characteristics, charge carrier mobilities, and NMR spectra as as-cast P3HT films. Furthermore, this method greatly simplifies solution-based device fabrication, is easily adaptable to current manufacturing workflows, and is potentially generalizable to other classes of materials.
Developments of high performance lubricants are driven by increasingly growing industrial demands and environmental concerns. We demonstrate oil-soluble polymer brush-grafted inorganic nanoparticles (hairy NPs) as highly effective lubricant additives for friction and wear reduction. A series of oil-miscible poly(lauryl methacrylate) brush-grafted silica and titania NPs were synthesized by surface-initiated atom transfer radical polymerization. Moreover, these hairy NPs showed exceptional stability in poly(alphaolefin) (PAO) base oil; no change in transparency was observed after being kept at -20, 22, and 100°C for ≥55 days. High-contact stress ball-on-flat reciprocating sliding tribological tests at 100°C showed that addition of 1 wt% of hairy NPs into PAO led to significant reductions in coefficient of friction (up to ≈40%) and wear volume (up to ≈90%). The excellent lubricating properties of hairy NPs were further elucidated by the characterization of the tribofilm formed on the flat. These hairy NPs represent a new type of lubricating oil additives with high efficiency in friction and wear reduction.
Abstract The development of high performance lubricants has been driven by increasingly growing industrial demands and environmental concerns. Herein, we demonstrate oil‐soluble polymer brush‐grafted inorganic nanoparticles (hairy NPs) as highly effective lubricant additives for friction and wear reduction. A series of oil‐miscible poly(lauryl methacrylate) brush‐grafted silica and titania NPs were synthesized by surface‐initiated atom transfer radical polymerization. These hairy NPs showed exceptional stability in poly(alphaolefin) (PAO) base oil; no change in transparency was observed after being kept at −20, 22, and 100 °C for ≥55 days. High‐contact stress ball‐on‐flat reciprocating sliding tribological tests at 100 °C showed that addition of 1 wt % of hairy NPs into PAO led to significant reductions in coefficient of friction (up to ≈40 %) and wear volume (up to ≈90 %). The excellent lubricating properties of hairy NPs were further elucidated by the characterization of the tribofilm formed on the flat. These hairy NPs represent a new type of lubricating oil additives with high efficiency in friction and wear reduction.
Contrast-variation small-angle neutron scattering (CV-SANS) is a widely used technique for quantifying hydration water in soft matter systems, but it is predominantly applied in the dilute regime or for systems with a well-defined structure factor. Here, CV-SANS was used to quantify the number of hydration water molecules associating with three water-soluble polymers with different critical solution temperatures and types of water–solute interactions in dilute, semidilute, and concentrated solution through the exploration of novel methods of data fitting and analysis. Multiple SANS fitting workflows with varying levels of model assumptions were evaluated and compared to give insight into SANS model selection. These fitting pathways ranged from general, model-free algorithms to more standard form and structure factor fitting. In addition, Monte Carlo bootstrapping was evaluated as a method to estimate parameter uncertainty through simulation of technical replicates. The most robust fitting workflow for dilute solutions was found to be form factor fitting without CV-SANS ( i.e. polymer in 100% D 2 O). For semidilute and concentrated solutions, while the model-free approach can be mathematically defined for CV-SANS data, the addition of a structure factor imposes physical constraints on the optimization problem, suggesting that the optimal fitting pathway should include appropriate form and structure factor models. The measured hydration numbers were consistent with the number of tightly bound water molecules associated with each monomer unit, and the concentration dependence of the hydration number was largely governed by the chemistry-specific interactions between water and polymer. Polymers with weaker water–polymer interactions ( i.e. those with fewer hydration water molecules) were found to have more bound water at higher concentrations than those with stronger water–polymer interactions due to the increase in the number of forced water–polymer contacts in the concentrated system. This SANS-based method to count hydration water molecules can be applied to polymers in any concentration regime, which will lead to improved understanding of water–polymer interactions and their impact on materials design.
The present invention generally relates to compositions, methods, and systems comprising polymers that are fluorous-soluble and/or organize at interfaces between a fluorous phase and a non-fluorous phase. In some embodiments, emulsions or films are provided comprising a polymer. The polymers, emulsions, and films can be used in many applications, including for determining, treating, and/or imaging a condition and/or disease in a subject. The polymer may also be incorporated into various optoelectronic device such as photovoltaic cells, organic light-emitting diodes, organic field effect transistors, or the like. In some embodiments, the polymers comprise pi-conjugated backbones, and in some cases, are highly emissive.
Advances in physical models and data science are improving predictions of polymer–solvent phase behavior and we discuss the different approaches taken today and the remaining barriers to making broadly useful predictions.
Abstract not provided.
Abstract Diketopyrrolopyrrole (DPP)‐conjugated polymers are a versatile class of semiconductors for application in organic solar cells because of their tunable optoelectronic properties. A record power conversion efficiency (PCE) of 9.4% was recently achieved for DPP polymers, but further improvements are required to reach true efficiency limits. Using five DPP polymers with different chemical structures and molecular weights, the device performance of polymer:fullerene solar cells is systematically optimized by considering device polarity, morphology, and light absorption. The polymer solubility is found to have a significant effect on the optimal device polarity. Soluble polymers show a 10–25% increase in PCE in inverted device configurations, while the device performance is independent of device polarity for less soluble DPP derivatives. The difference seems related to the polymer to fullerene weight ratio at the ZnO interface in inverted devices, which is higher for more soluble DPP polymers. Optimization of the nature of the cosolvent to narrow the fibril width of polymers in the blends toward the exciton diffusion length enhances charge generation. Additionally, the use of a retroreflective foil increases absorption of light. Combined, the effects afford a PCE of 9.6%, among the highest for DPP‐based polymer solar cells.
An experimental study is presented on the hierarchical assembly of {alpha}-helical block copolymers polystyrene-poly({gamma}-benzyl-L-glutamate) into anisotropic ordered structures. We transformed thin solid films into solutions through exposure to solvent vapor and studied the nucleation and growth of ordered three-dimensional structures in such solutions, with emphasis on the dependence of these processes on supersaturation with respect to the solubility limit. Interestingly, polymer solubility could be significantly influenced via variation of humidity in the surrounding gas phase. It is concluded that the interfacial tension between the ordered structures and the solution increased with humidity. The same effect was observed for other protic non-solvents in the surrounding gas phase and is attributed to a complexation of poly({gamma}-benzyl-L-glutamate) by protic non-solvent molecules (via hydrogen-bonding interactions). This change of polymer solubility was demonstrated to be reversible by addition or removal of small amounts of protic non-solvent in the surrounding gas phase. At a constant polymer concentration, ordered ellipsoidal structures could be dissolved by removing water or methanol present in the solution. Such structures formed once again when water or methanol was reintroduced via the vapor phase.
Achieving homogeneous dispersion of nanoporous fillers within membrane architectures remains a great challenge for mixed-matrix membrane (MMMs) technology. Imparting solution processability of nanoporous materials would help advance the development of MMMs for membrane-based gas separations. A mechanochemically assisted oxidative coupling polymerization strategy was used to create a new family of soluble nanoporous polymer networks. The solid-state ball-milling method affords inherent molecular weight control over polymer growth and therefore provides unexpected solubility for the resulting nanoporous frameworks. MMM-based CO 2 /CH 4 separation performance was significantly accelerated by these new soluble fillers. In conclusion, we anticipate this facile method will facilitate new possibilities for the rational design and synthesis of soluble nanoporous polymer networks and promote their applications in membrane-based gas separations.
Elucidating gas solubility in confined polymer systems addresses a fundamental gap in polymer physics and has important implications for gas barrier and separation technologies and polymer upcycling reactions. In this study, we examine the solubility of methanol and n-hexane in polystyrene and low-density polyethylene confined within the interstitial pores of disordered silica nanoparticle packings. Using capillary rise infiltration, these polymers are infiltrated into the nanoparticle packings. Gas solubility in these confined polymers is measured using a quartz crystal microbalance. Remarkably, confinement leads to a 10- to ∼100-fold increase in gas solubility. Systematic experiments reveal that pore size plays a dominant role in increasing solubility. In contrast, the molecular weight of the polymer and the surface wetting characteristics of the nanoparticles, achieved by hydrophobically modifying the nanoparticles, have minimal effects. By systematically varying penetrant polarity, polymer crystallinity, pore size, and nanopore surface chemistry, this study isolates geometric nanoconfinement as the dominant factor governing solubility enhancement in confined polymers. Atomistic simulations revealed that confinement and surface−polymer interactions both contribute to enhanced solubility, with polymer packing playing a significant role in modulating gas uptake. Here, these results suggest that the changes in the molecular arrangements of polymer segments underlie the observed trends. This study highlights the potential of confined polymers in engineering the separation performance of membranes and heterogeneously catalyzed polymer upcycling reactions.
Porphyrin polymers of Structure 1, where n is an integer (e.g., 1, 2, 3, 4, 5, or greater) ##STR00001## are synthesized by the method shown in FIGS. 2A and 2B. The porphyrin polymers of Structure 1 are soluble in organic solvents such as 2-MeTHF and the like, and can be synthesized in bulk (i.e., in processes other than electropolymerization). These porphyrin polymers have long excited state lifetimes, making the material suitable as an organic semiconductor for organic electronic devices including transistors and memories, as well as solar cells, sensors, light-emitting devices, and other opto-electronic devices.