Search NASA⌕ Search

SEARCH · Search NASA

Results for “polymeric conformational effect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

The polymeric conformational effect on capacitive deionization performance of graphene oxide/polypyrrole composite electrode

Exploitation of novel faradic materials is an alternative implementation for solving the problem of poor specific electrosorption capacity that conventional carbon materials are encountered in capacitive deionization. Particularly, composite electrode is just a suitable choice because of its potentially high ion-storage ability. Herein, a cyclic voltammetric treatment method with different low limit of potential window was used to manipulate the polymeric conformation and doping level of graphene oxide/polypyrrole (GO/PPy) composite electrode. Based on it, the effect of polymeric structure on the electrosorption performance was systematically studied. When the low limit of potential window is shifted negatively enough, the irreversible polymeric conformational shrinks of GO/PPy are promoted, which not only hinders the insertion process of ions, but also decreases the doping level of polymer due to the intensive interchain-action produced by more entangled polymeric chain. Thus, the number of intercalated ions should decrease, which is expressed by electrochemical impedance spectroscopy (EIS) results and is proportional to the electrosorption capacity of GO/PPy composite electrode in membrane capacitive deionization (MCDI) process. Finally, our work suggests that the less packing density, higher doping level and more charge delocalization on PPy backbone in electrode are beneficial to enhance its capacitive deionization performance.

42 ENGINEERING↗
DOE OSTI2020

Charge carrier transport in thin conjugated polymer films: influence of morphology and polymer/substrate interactions

The performance of conjugated polymer (CP)-based electronic devices relies on optimal charge carrier mobilities, which are determined by monomeric architecture, degree of polymerization, chain conformation, and the nano- and mesoscale morphologies. With regard to the latter, we discuss two effects that have received limited attention in the literature, yet important for device performance optimization: (1) the role of morphological disorder and of CP/substrate interactions on the in-plane and out-of-plane carrier transport in CPs; (2) the impact of morphological disorder on charge transfer at the CP/substrate interface. The emergence of film thickness-dependent carrier mobilities, varying over two orders of magnitude within a length scale of 200 nm, and band-bending phenomena, extending tens of nanometers within the CP, are associated with these effects. These findings suggest areas for further research in order to enable widespread applications of next-generation CP-based devices.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Processable High Electron Mobility {pi}-Copolymers via Mesoscale Backbone Conformational Ordering

The synthesis and experimental/theoretical characterization of a new series of electron-transporting copolymers based on the naphthalene bis(4,8-diamino-1,5-dicarboxyl)amide (NBA) building block are reported. Comonomers are designed to test the emergent effects of manipulating backbone torsional characteristics, and density functional theory (DFT) analysis reveals the key role of backbone conformation in optimizing electronic delocalization and transport. The NBA copolymer conformational and electronic properties are characterized using a broad array of molecular/macromolecular, thermal, optical, electrochemical, and charge transport techniques. All NBA copolymers exhibit strongly aggregated morphologies with significant nanoscale order. Copolymer charge transport properties are investigated in thin-film transistors and exhibit excellent electron mobilities ranging from 0.4 to 4.5 cm(2) V-1 s(-1). Importantly, the electron transport efficiency correlates with the film mesoscale order, which emerges from comonomer-dependent backbone planarity and extension. These results illuminate the key NBA building block structure-morphology-bulk property design relationships essential for processable, electronics-applicable high-performance polymeric semiconductors.

n‐↗
DOE OSTI2024

Tailoring Hierarchical Structure and Rare Earth Affinity of Compositionally Identical Polymers via Sequence Control

Macromolecule sequence, structure, and function are inherently intertwined. While well-established relationships exist in proteins, they are more challenging to define for synthetic polymer nanoparticles due to their molecular weight, sequence, and conformational dispersities. Furthermore, to explore the impact of sequence on nanoparticle structure, we synthesized a set of 16 compositionally identical, sequence-controlled polymers with distinct monomer patterning of dimethyl acrylamide and a bioinspired, structure-driving di(phenylalanine) acrylamide (FF). Sequence control was achieved through multiblock polymerizations, yielding unique ensembles of polymer sequences which were simulated by kinetic Monte Carlo simulations. Systematic analysis of the global (tertiary- and quaternary-like) structure in this amphiphilic copolymer series revealed the effect of multiple sequence descriptors: the number of domains, the hydropathy of terminal domains, and the patchiness (density) of FF within a domain, each of which impacted both chain collapse and the distribution of single- and multichain assemblies. Furthermore, both the conformational freedom of chain segments and local-scale, β-sheet-like interactions were sensitive to the patchiness of FF. To connect sequence, structure, and target function, we evaluated an additional series of nine sequence-controlled copolymers as sequestrants for rare earth elements (REEs) by incorporating a functional acrylic acid monomer into select polymer scaffolds. We identified key sequence variables that influence the binding affinity, capacity, and selectivity of the polymers for REEs. Collectively, these results highlight the potential of and boundaries of sequence control via multiblock polymerizations to drive primary sequence ensembles hierarchical structures, and ultimately the functionality of compositionally identical polymeric materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Synthesis and morphological characterization of linear and miktoarm star poly(solketal methacrylate)- block -polystyrene copolymers

The synthesis, molecular characterization, and morphological evaluation of AB n, (n = 2,3) miktoarm star block copolymers consisting of poly(glycerol monomethacrylate) (PGMA) and polystyrene (PS) with varying molecular weights and compositions is described. The system is known to demonstrate a remarkably high Flory-Huggins interaction parameter. The corresponding linear diblock copolymer analogues, were synthesized as well, and comparisons with regard to feature dimensions and morphologies are provided. Well-ordered nanostructures of various morphologies were formed with domain spacing as low as 7.2 nm. Different morphologies were attained by some of the topological isomers indicating that in miktoarm star block copolymers the phase boundaries were strongly shifted. Additionally, a triblock ABA analogue was studied to investigate the effect of triblock copolymer conformations. Noteworthy is that for copolymers with different macromolecular architecture leading to similar morphology; different domain spacings were obtained. The synthesis of all the samples was carried out by high-vacuum anionic polymerization techniques. Molecular characterization with Size Exclusion Chromatography (SEC) and Proton Nuclear Magnetic Resonance Spectroscopy ( 1 H NMR) confirmed well-defined copolymers obtained. The morphological characterization was accomplished by Small-Angle X-ray Scattering (SAXS). In conclusion, the observations from this study highlight the potential of incorporating macromolecular architecture in the self-assembly of strongly immiscible block copolymers to attain ultra-small nanofeatures with desired morphologies.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Unified understanding of the impact of semiflexibility, concentration, and molecular weight on macromolecular-scale ring diffusion

Conformationally fluctuating, globally compact macromolecules such as polymeric rings, single-chain nanoparticles, microgels, and many-arm stars display complex dynamic behaviors due to their rich topological structure and intermolecular organization. Synthetic rings are hybrid objects with conformations that display both ideal random walk and compact globular features, which can serve as models of genomic DNA. To date, emphasis has been placed on the effect of ring molecular weight on their unusual behaviors. Here, we combine simulations and a microscopic force-level theory to build a unified understanding for how key aspects of ring dynamics depend on different tunable molecular properties including backbone rigidity, monomer concentration, degree of traditional entanglement, and molecular weight. Our large-scale molecular dynamics simulations of ring melts with very different backbone stiffnesses reveal unanticipated behaviors which agree well with our generalized theory. This includes a universal master curve for center-of-mass diffusion constants as a function of molecular weight scaled by a chemistry and thermodynamic state-dependent critical molecular weight that generalizes the concept of an entanglement cross-over for linear chains. The key physics is how backbone rigidity and monomer concentration induced changes of the entanglement length, interring packing, degree of interpenetration, and liquid compressibility slow down space-time dynamic-force correlations on macromolecular scales. A power law decay of the center-of-mass diffusion constant with inverse molecular weight squared is the first consequence, followed by an ultraslow activated hopping transport regime. Our results set the stage to address slow dynamics and kinetic arrest in different families of compact synthetic and biological polymeric systems.

Science & Technology - Other Topics↗
DOE OSTI2023

Molecular Design of Functional Polymers for Silica Scale Inhibition

Silica polymerization, which involves the condensation reaction of silicic acid, is a fundamental process with wide-ranging implications in biological systems, material synthesis, and scale formation. The formation of a silica-based scale poses significant technological challenges to energy-efficient operations in various industrial processes, including heat exchangers and water treatment membranes. Despite the common strategy of applying functional polymers for inhibiting silica polymerization, the underlying mechanisms of inhibition remain elusive. In this study, we synthesized a series of nitrogen-containing polymers as silica inhibitors and elucidated the role of their molecular structures in stabilizing silicic acids. Polymers with both charged amine and uncharged amide groups in their backbones exhibit superior inhibition performance, retaining up to 430 ppm of reactive silica intact for 8 h under neutral pH conditions. In contrast, monomers of these amine/amide-containing polymers as well as polymers containing only amine or amide functionalities present insignificant inhibition. Molecular dynamics simulations reveal strong binding between the deprotonated silicic acid and a polymer when the amine groups in the polymer are protonated. Notably, an extended chain conformation of the polymer is crucial to prevent proximity between the interacting monomeric silica species, thereby facilitating effective silica inhibition. Furthermore, the hydrophobic nature of alkyl segments in polymer chains disrupts the hydration shell around the polymer, resulting in enhanced binding with ionized silicic acid precursors compared to monomers. Finally, our findings provide novel mechanistic insights into the stabilization of silicic acids with functional polymers, highlighting the molecular design principles of effective inhibitors for silica polymerization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Improved adhesion of polyurethane-based nanocomposite coatings to tin surface through silane coupling agents

Conformal coatings with higher adhesion strength is critical for mitigating the growth of whiskers from the pure tin (Sn) or Sn-rich surfaces of the Pb-free electronics. Silane coupling agents have the ability to form a durable bond between polymeric coatings and metallic materials. The main goal of this paper is to investigate the effect of silane agents on the adhesion behavior of polyurethane (PU), polyurethane acrylate (PUA) and both coatings filled with silicone rubber (SR) nanoparticles on the tin solder pads. It was found that an isocyanate-based silane provided excellent adhesion for PU and PU + SR coatings and an acrylic-based silane for PUA and PUA + SR coatings on the tin surface. This was due to the reaction bond formation between the silane coupling agent and the coating. Hence, the selection of silane coupling agents with the organofunctional group similar to the coating material is crucial to improve the adhesion properties of the coating.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Can the Hock Process Be Used to Produce Phenol from Polystyrene?

Polystyrene (PS) is a widely used thermoplastic polymer, but its very low recycling rate has motivated consideration of chemical conversion strategies to convert waste PS into value-added products. Oxidation methods have been widely studied, but they typically generate benzoic acid, a product with a relatively low market demand. Phenol is a higher volume chemical that would be an appealing target, but no methods currently exist for the conversion of PS into phenol. The repeat unit in PS closely resembles cumene, the primary feedstock used to produce phenol through the Hock process. Here, we investigate prospects for adapting the Hock process to PS, generating hydroperoxides through the autoxidation of benzylic C–H bonds followed by the acid-promoted rearrangement of the hydroperoxides to afford phenol and a partially oxygenated polymer. Experimental and computational studies of dimeric and trimeric PS model compounds show that neighboring phenyl rings impose conformational constraints that raise the barrier to hydrogen-atom transfer from the tertiary benzylic C–H bond. These effects are also evident with PS and contribute to lower yields of phenol when PS is subjected to Hock process conditions. Furthermore, these results provide valuable insights that have important implications for other efforts that seek to adapt small-molecule reactivity to polymeric feedstocks.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Microscopic Theory of Long-Time Center-of-Mass Self-Diffusion and Anomalous Transport in Ring Polymer Liquids

We construct a microscopic theory at the level of segment-scale correlated space–time intermolecular forces for the long-time center-of-mass (CM) diffusion constant and intermediate-time non-Fickian transport in dense solutions and melts of ring polymers. The approach combines ideas of polymer, colloid, and liquid-state statistical mechanics to quantify how the multifractal intra-ring conformational structure and inter-ring packing correlations determine dynamic caging constraints and time-dependent friction. Breakdown of Rouse theory is predicted to occur due to length scale-dependent temporal correlation of forces exerted on pairs of tagged ring segments from surrounding polymers. At large enough degrees of polymerization (N), a stronger scaling of the CM diffusion constant (D ∝ N –2 ) is predicted, with a crossover N D proportional to the product of the system-specific macromolecular volume fraction and dimensionless compressibility. In analogy with caging effects in glass-forming fluids, the theory does appear to begin to fail at sufficiently high N/N D for the center-of-mass diffusivity, likely due to another crossover to an even slower activated transport regime. However, use of N/N D with the theoretically predicted N D , in conjunction with dynamic blob scaling ideas for local Rouse friction, collapses semidilute and concentrated solution simulation data onto a master curve. Based on the same physical ideas employed to predict the diffusion constant, a generalized Langevin equation description is formulated for intermediate-time CM transport. It predicts two subdiffusive regimes that emerge due to the self-similar nature of internal ring structure. Analytic and numerical predictions for the apparent non-Fickian exponent as a function of time, N/N D and dimensionless compressibility, the evolution of the maximum degree of subdiffusive motion with N/N D , and the time scale for recovering Fickian diffusion are made, all of which are in good accordance with melt simulations. Furthermore, the present work sets the stage to address activated dynamics and glass formation on the macromolecular scale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Local Chain Dynamics in Sequence-Controlled Polymers as a Tunable Handle for Rare Earth Sequestration

Chain dynamics govern the intricate behaviors of proteins, underpinning functions such as catalysis, recognition, and stimulus response, and are an increasingly appreciated aspect of structure–function relationships. Analogously, manipulating chain dynamics and structure in abiotic polymers via sequence control is an exciting, yet underexplored, strategy for improving material functions. In this work, we report a systematic study relating the sequence of polymeric sequestrants to their structure and dynamics, as well as to their binding affinity and selectivity for model substrates, rare earth elements (REEs). A series of sequence-controlled polymers with metal chelating, solubilizing, and structure forming monomers was synthesized via multiblock polymerization, yielding compositionally identical polymers with spectroscopically resolved domains and distinct morphologies. Using a combination of small-angle X-ray scattering and 19 F NMR relaxometry measurements, we connected differences in polymer structure and dynamics to polymer sequence variables such as the patchiness (density) of the structure forming monomer and the location of the chelating monomer. Furthermore, we found that, relative to calcium, all polymers in the series collapse more and have slower dynamics when binding REEs (lanthanum and lutetium) , though the extent of these effects were sequence-dependent and localized to specific domains within the polymer. Notably, sequence-controlled polymers that exhibited the largest conformational and dynamic changes upon binding REEs also bound REEs with the greatest affinity and modest selectivity. Collectively, these results correlate monomer patterning with dynamics, morphology, and REE binding performance en route to the development of efficient and selective macromolecular chelators.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Mechanistic Study of Controlled Zinc Electrodeposition Behaviors Facilitated by Nanoscale Electrolyte Additives at the Electrode Interface

Nanoparticle organic hybrid materials (NOHMs) are liquid-like materials composed of an inorganic core to which a polymeric canopy is ionically tethered. NOHMs have unique properties including negligible vapor pressure, high oxidative thermal stability, and the ability to bind to reactive species of interest due to the tunability of their polymeric canopy. This makes them promising multifunctional materials for a wide range of energy and environmental technologies, including electrolyte additives for electrochemical energy storage (e.g., flow batteries) and the electrochemical conversion of CO 2 to chemicals and fuels. Due to their unique transport behaviors in fluid systems, an understanding of the near-electrode surface behavior of NOHMs in electrolyte solutions and their effect on electrochemical reactions is still lacking. In this work, the complexation of zinc (Zn) by NOHMs with an ionically tethered polyetheramine canopy (HPE) (NOHM-I-HPE) was studied using attenuated total reflectance Fourier transform infrared and Carbon-13 nuclear magnetic resonance spectroscopy. Additionally, various electrochemical techniques were employed to discern the role of NOHM-I-HPE during zinc electrodeposition, and the results were compared to those of the electrochemical system containing untethered HPE polymers. Our findings confirmed that NOHM-I-HPE and HPE reversibly complex zinc in the aqueous electrolyte. NOHM-I-HPE and HPE were found to block some of the electrode active sites, reducing the overall current density during electrodeposition, while facilitating the formation of smooth zinc deposits, as revealed by surface imaging and diffraction techniques. Observed variations in the current density responses and the degree of passivation created by the NOHM-I-HPE and HPE adsorbed on the electrode surface revealed that their different packing behaviors at the electrode–electrolyte interface influence the zinc deposition mechanism. The presence of the nanoparticle and ordering offered by the NOHMs as well as the structured conformation of the polymeric canopy allowed the formation of void spaces and free volumes for enhanced transport behaviors. Furthermore, these findings provided insights into how structured electrolyte additives such as NOHMs can allow for advancements in electrolyte design for controlled deposition of metal species from energy-dense electrolytes or for other electrochemical reactions.

25 ENERGY STORAGE↗
DOE OSTI2021

Effect of Graft Molecular Weight and Density on the Mechanical Properties of Polystyrene-Grafted Cellulose Nanocrystal Films

In this work, polymer-grafted nanoparticle (PGN) films were prepared from polystyrene (PS) grafted to rodlike cellulose nanocrystals (MxG-CNC-g-PS) with a controllable grafting density (0.03–0.25 chains/nm 2 ) and molecular weight (5–60 kg/mol). These nanorod-based PGNs are solution- and melt-processible, permitting access to one-component composite films with high nanofiller loadings (with up to 55 wt %). The impact of both grafted polymer density and molecular weight on the mechanical properties of the films was investigated and related to the polymer brush conformation: concentrated polymer brush (CPB), semidilute polymer brush (SDPB), or CPB core with SDPB corona (CPB/SDPB). The rubbery regime storage modulus (above $T_g$) showed 2 orders of magnitude increase, maximizing at a low degree of polymerization (N) and low grafting density (σ). Fracture toughness was maximized in samples with the grafted polymer in the SDPB or CPD/SDPB (higher N and relatively low σ) regime and showed enhancement relative to PS of molecular weight similar to the graft. In line with prior computation predictions, optimizing for both rubbery modulus and fracture toughness in such nanorod-based PGN films requires the polymers in the SDPB regime and CNC loading levels (ca. 50–60 wt %) that are difficult to attain in more traditional two-component CNC composites.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Cyclic Topology Enhancing Structural Ordering and Stability of Comb-Shaped Polypeptoid Thin Films against Melt-Induced Dewetting

We investigated the effect of cyclic chain topology on the molecular ordering and thermal stability of comb-shaped polypeptoid thin films on silicon (Si) substrates. Cyclic and linear poly(N-decylglycine) (PNDG) bearing long n-decyl side chains were synthesized by ring-opening polymerization of N-decylglycine-derived N-carboxyanhydrides. When the spin-coated thin films were subjected to thermal annealing at temperatures above the melting temperature (T > T m ), the cyclic PNDG films exhibited significantly enhanced stability against melt-induced dewetting than the linear counterparts (l-PNDG). When recrystallized at temperatures below the crystallization temperature (T < T c ), the homogeneous c-PNDG films exhibit enhanced crystalline ordering relative to the macroscopically dewetted l-PNDG films. Both cyclic and linear PNDG molecules adopt cis-amide conformations in the crystalline film, which transition into trans-amide conformations upon melting. A top-down solvent leaching treatment of both l/c-PNDG films revealed the formation of an irreversibly physisorbed monolayer with similar thickness (ca. 3 nm) on the Si substrate. The physisorbed monolayers are more disordered relative to the respective thicker crystalline films for both cyclic and linear PNDGs. Upon heating above T m , the adsorbed c-PNDG chains adopt trans-amide backbone conformation identical with the free c-PNDG molecules in the molten film. By contrast, the backbone conformations of l-PNDG chains in the adsorbed layers are notably different from those of the free chains in the molten film. We postulate that the conformational disparity between the chains in the physically adsorbed layers versus the free chains in the molten film is an important factor to account for the difference in the thermal stability of PNDG thin films. These findings highlight the use of cyclic chain topology to suppress the melt-induced dewetting in polymer thin films.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Dynamic Mixing Behaviors of Ionically Tethered Polymer Canopy of Nanoscale Hybrid Materials in Fluids of Varying Physical and Chemical Properties

An emerging area of sustainable energy and environmental research is focused on the development of novel electrolytes that can increase the solubility of target species and improve subsequent reaction performance. Electrolytes with chemical and structural tunability have allowed for significant advancements in flow batteries and CO 2 conversion integrated with CO 2 capture. Liquid-like nanoparticle organic hybrid materials (NOHMs) are nanoscale fluids that are composed of inorganic nanocores and an ionically tethered polymeric canopy. NOHMs have been shown to exhibit enhanced conductivity making them promising for electrolyte applications, though they are often challenged by high viscosity in the neat state. In this study, a series of binary mixtures of NOHM-I-HPE with five different secondary fluids, water, chloroform, toluene, acetonitrile, and ethyl acetate, were prepared to reduce the fluid viscosity and investigate the effects of secondary fluid properties (e.g., hydrogen bonding ability, polarity, and molar volume) on their transport behaviors, including viscosity and diffusivity. We report our results revealed that the molecular ratio of secondary fluid to the ether groups of Jeffamine M2070 ($λ_{\text{SF}}$) was able to describe the effect that secondary fluid has on transport properties. Our findings also suggest that in solution, the Jeffamine M2070 molecules exist in different nanoscale environments, where some are more strongly associated with the nanoparticle surface than others, and the conformation of the polymer canopy was dependent on the secondary fluid. This understanding of the polymer conformation in NOHMs can allow for the better design of an electrolyte capable of capturing and releasing small gaseous or ionic species.

25 ENERGY STORAGE↗
DOE OSTI2022

Poly(cyclosilane) Connectivity Tunes Optical Absorbance

We report herein the influence of skeletal connectivity on the conformation-dependent optical properties of cyclosilane homo- and copolymers. 1,3-Linked cyclosilanes were bathochromically shifted by 20 nm in solution relative to 1,4-linked cyclosilanes, an effect reproduced by quantum chemical calculations on oligomeric model systems. Polysilane optical properties are conformation-dependent, and 1,3-linked cyclosilanes were hypothesized to adopt a favorable conformation unavailable to 1,4-linked cyclosilanes constrained to an endocyclic gauche conformation. Copolymerization of the isomeric cyclosilanes 1,3Si 6 and 1,4Si 6 afforded linear statistical copolymers, as characterized by 1 H and 29 Si NMR spectroscopies. The distinct connectivity of each comonomer was found to give rise to tunable absorption spectra, where the position of the absorption band systematically increased with the increased corporation of 1,3Si 6 . Computational studies pointed to conformation-dependent changes in orbital symmetry in shifting the most intense transition from the low-energy highest occupied molecular orbital (HOMO) → lowest unoccupied molecular orbital (LUMO) transition to a higher-energy HOMO → LUMO + n transition. Here, the results of these studies demonstrate for the first time the role of silicon skeletal connectivity in controlling conformation and optoelectronic properties and provide new insight into the structure-based design of solution-processable silicon-based polymeric materials.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Hexagonal Lattices of HIV Capsid Proteins Explored by Simulations Based on a Thermodynamically Consistent Model

HIV capsid proteins (CAs) may self-assemble into a variety of shapes under in vivo and in vitro conditions. Here, we employed simulations based on a residue-level coarse-grained (CG) model with full conformational flexibility to investigate hexagonal lattices, which are the underlying structural pattern for CA aggregations. Facilitated by enhanced sampling simulations to rigorously calculate CA dimerization and polymerization affinities, we calibrated our model to reproduce the experimentally measured affinities. Here using the calibrated model, we performed unbiased simulations on several large systems consisting of 1512 CA subunits, allowing reversible binding and unbinding of the CAs in a thermodynamically consistent manner. In one simulation, a preassembled hexagonal CA sheet developed spontaneous curvatures reminiscent of those observed in experiments, and the edges of the sheet exhibited local curvatures larger than those of the interior. In other simulations starting with randomly distributed CAs at different concentrations, existing CA assemblies grew by binding free capsomeres to the edges and by merging with other assemblies. At high CA concentrations, rapid establishment of predominant aggregates was followed by much slower adjustments toward more regular hexagonal lattices, with increasing numbers of intact CA hexamers and pentamers being formed. Our approach of adapting a general CG model to specific systems by using experimental binding data represents a practical and effective strategy for simulating and elucidating intricate protein aggregations.

59 BASIC BIOLOGICAL SCIENCES↗